Used Heating Rail for sale (20,298)

Condition: used, machine/vehicle number: 006906, X axis working area: 4175 mm Y axis working area: 1730 mm Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Total number of drilling spindles: 20 Rsdewgktbepfx Ag Njp Total number of tool changer positions: 18

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Rodpfjvctlgjx Ag Njp Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 24

Condition: new, Factory-new electrically heated stainless steel mixing vessel with insulation and propeller agitator, including operating manual and CE declaration of conformity. Model: EBB250RWP Alternatively available with other agitator types and in different sizes. Capacity: 250L Approx. dimensions: Ø 595mm x cylindrical height 900mm Redpsyngxnofx Ag Nsp Total height: 1240mm plus agitator motor Material: 1.4301 stainless steel V2A Surface finish: IIIc / 2B Weld seams ground on the inside Max. operating temperature: 110°C Operating pressure vessel: ATM -Upright design on casters -Top: Hinged lid, half bolted, half hinged with removable stainless steel sheet grid as reach-in protection -Bottom: Flat bottom with lateral outlet DN50 DIN11851 and disk valve, EPDM seal -Agitator flange connection on the top cover -2x push handles Propeller agitator: Power: 0.37 kW Speed: 1410 rpm Operating voltage: 3PH 400V

Condition: new, Automatic Wood Chip and Wood Shavings Fired Boiler System Technical Data: Type: T4 – 150 Output: 150 kW Width: 790 mm Rjdoykqwmspfx Ag Nsp Height: 1840 mm Length: 1770 mm Weight: 1500 kg Water capacity: 340 l Maximum permissible operating temperature: 90°C Maximum permissible operating pressure: 3 bar Electrical connection / Power supply: 400 V / 50 Hz / C16A

Condition: used, machine/vehicle number: 008205, X axis working area: 4250 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 22 Rodpfx Asx A Th Reg Nsp

Condition: new, Factory-new electrically heated stainless steel mixing tank, insulated, with propeller agitator, including operating manual and CE declaration of conformity. Model: EBB150RWP Also available with alternative agitator types and in other sizes. Capacity: 152 L Approximate dimensions: Ø 660 mm x cylindrical height 625 mm Total height: 910 mm (+ agitator motor) Material: 1.4301 (V2A) stainless steel Finish: IIIc / 2B Weld seams ground Maximum operating temperature: 110°C Operating pressure (tank): atmospheric -Upright design on castors -Top: Hinged lid, half bolted, half hinged, with removable stainless steel safety grid -Bottom: Flat bottom with lateral outlet DN50 DIN 11851 and disc valve, EPDM gasket -Agitator flange connection on top Rjdpfxeym Ucle Ag Nep -2x push handles -1x type plate Agitator: Propeller agitator Power: 0.25 kW Speed: 980 rpm Operating voltage: 3-phase 400 V

Condition: good (used), Year of construction: 2020, Heat exchanger, rotary heat exchanger, exhaust air heat exchanger, microchannel heat exchanger, microchannel tube heat exchanger, condenser, evaporator coil, MCHE Rjdpfxsyh Ebre Ag Nsp -Manufacturer: SunCo, microchannel heat exchanger -Type: SC-1800 -Heat exchanger: made of aluminum tubes with aluminum fins -Connection: with copper pipe, see photos -Dimensions: 1210/1150/H40 mm -Weight: 16.8 kg

Condition: new, Year of construction: 1988, For sale: mobile industrial fan from the former GDR, manufactured by VEB MAW Armaturenwerk Wehrsorf (Zittau), powered by a 0.75 kW motor from the USSR. Sturdy steel construction on castors – ideal for dust extraction, air supply, local ventilation, or machine cooling. Technical data: • Airflow: 1020 m³/h • Total pressure: 834 N/m² • Static pressure: 681 N/m² • Density: 1.20 kg/m³ • Speed: 2800 rpm • Power consumption: 0.5 kW • Max operating temperature: 35°C • Year of manufacture: not fully specified – likely 1980–1990 Rjdpfxoud R Iie Ag Nop Motor: • Type: АИР71А2УЗ • Power: 0.75 kW • Speed: 2820 rpm • Voltage: 220/380 V • Protection class: IP54 • Manufactured in the USSR Advantages: • Compact and mobile design • Operational drive, ready for use • Suitable for workshops, paint shops, ventilation, burners

Condition: used, functionality: fully functional, Oil heating system for sale. Available for collection from April. Rjdpfsym N Uvjx Ag Nop

Condition: new, Factory-new electrically heated stainless steel agitator tank EBB90RWP Including operating manual and CE declaration of conformity. The double jacket is filled with thermal oil, which is heated by an electric heating element. Alternatively available with other agitator types and in other sizes. Volume: 97L Dimensions approx.: Ø 540mm x cylindrical height 625mm Total height: 910mm (+ agitator motor) Material: 1.4301 stainless steel (V2A) Surface: inside and outside finely ground (matte finish) Weld seams ground smooth Max. operating temperature: 110°C Operating pressure (tank): Atm - Upright design on castors - Top: folding lid, half bolted, half hinged, with removable stainless steel grating for reach-in protection - Bottom: flat base with lateral outlet DN50 DIN11851 and disc valve - Agitator flange on the top cover - 2x push handles - 1x nameplate Rsdpfx Agoym Arbs Nop Propeller agitator Power: 0.25 kW Speed: 980 rpm Operating voltage: 3PH 400V

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 320.0065.Q06, nominal heat output: 320 kW (435.08 HP), Equipment: hot water, Wood chip boiler with moving grate. Fireclay lining in very good condition. Fully functional. Being replaced due to installation of a larger boiler. Sold without articulated discharge auger. Rjdpjymkygsfx Ag Njp

Year of construction: 2025, condition: new, functionality: fully functional, Equipment: CE marking, Bogie hearth furnace / kiln / oven for heat treatments on steel (normalizing, annealing, tempering, preheating, etc.) made by Pagnotta Termomeccanica srl, Deruta, Italy Model FFEC/TT Maximum temperature: 800°C Usable load dimensions: 1,300 x 1,000 x 1,300 mm (H) CE certification 12-month warranty New machine, built in Italy Rsdpfjwd Haljx Ag Njp The specifications and attached photos are purely indicative. Customized machines are available, specifically for each heat treatment process.

Condition: like new (used), Year of construction: 2024, operating hours: 170 h, functionality: fully functional, We are offering this as-new Danube WED 120C washing machine/steam heater, year of manufacture 2024. Manufacturer: Danube Model: WED 120C Year of manufacture: 2024 Condition: as new Category ID: 590 Rsdpfx Agsymlh Eo Nep Type ID: 1792 Machine type: Washing machine/steam heater If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2007, power: 1,600 kW (2,175.39 HP), Complete heating system Polzenith 1.6 Mw, 2007 The heating system consists of: - Fuel storage. Steel construction with moving floor - Scratch requirement - Electric filter Beth with electrical cabinet - Chimney 12m Redpfjvlkdxjx Ag Nop - All smoke lines - Complete with electrical and hydraulic system Very good facility. Ready dismantled, ready for loading.

Condition: used, Year of construction: 2011, operating hours: 32,500 h, functionality: fully functional, power: 140 kW (190.35 HP), rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, overall weight: 3,500 kg, temperature: 25 °C, We are offering this used MAN E2876 combined heat and power unit, year of manufacture 2011. Year: 2011 Model: E2876 E312 Engine number: 298 3025 272 3007 Serial number: 3007 Factory number: 5019615 Job number: Power output: 150 kW Speed: 1,500 rpm Temperature: 25 °C Installation altitude: 100 m Redeylmbqspfx Ag Nop If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1993, functionality: limited functionality, nominal heat output: 500 kW (679.81 HP), heating capacity: 500 kW (679.81 HP), operating pressure: 4 bar, Equipment: type plate available, Urbas reciprocating grate heating system with primary and secondary blower, cyclone, hydraulic fuel discharge with push rod (no auger), all hydraulically operated for coarse material. Some boiler passes are welded. Complete with control unit, has been in operation until now; plant is being dismantled due to relocation. Fireclay lining in very good condition. Rsdpoyk Sgcsfx Ag Njp

Condition: used, Year of construction: 2002, machine/vehicle number: 98, Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Rsdpjupy S Nofx Ag Njp Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III The system is available twice, price per unit Note: Rjdpfxsw Hxgve Ag Nsp The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Rodpfx Ajwa Ax Aeg Njp Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 134291, heating capacity: 205 kW (278.72 HP), We are offering a fully operational wood chip combustion plant, pneumatically fed by two fans. The plant is still in operation and must be dismantled by the buyer. Inspection is welcome. Rodpfx Agsyl R Two Nep

Condition: used, Continuous fryer. Thermal oil heated, Teflon infeed etc. In nice condition but needs new control system. Redpfxjyivr Tj Ag Njp

Condition: used, machine/vehicle number: 008337, X axis working area: 3060 mm Y axis working area: 1260 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 21 Total number of tool changer positions: 10 Rsdpfex A Tlpsx Ag Nep

Condition: used, machine/vehicle number: 9030, Industrial electric chamber furnace for heat treatment processes (hardening / normalizing / tempering; possible use for carburizing cycles depending on internal configuration), ideal for workshops, tool rooms, and steel processing. Identification data: - Manufacturer: SAPIM – Sesto S. Giovanni (MI) - Type / Model: RM45 - Serial / No.: 9030 Rsdpeyl Nikefx Ag Nep Electrical specifications: - Supply: 380 V, three-phase - Installed power: 18 kW - Rated current: 27 A - Type: 3-phase electric furnace Performance: - Maximum rated temperature: 950°C Dimensions and capacity: - Door opening (W×H): 710 × 560 mm - Door thickness: 140 mm - Overall dimensions (W×D×H): approx. 1,500 × 1,500 × 2,500 mm (height includes cover/shroud) Internal furnace dimensions: 80×40×30 cm Controls / Instrumentation: - Electrical panel with analog Voltmeter (V) and Ammeter (A) - DIGITEK MP:7 temperature controller with AL1 / AL2 and ON indicators

Condition: new, Year of construction: 2019, load capacity: 1,200 kg, lifting height: 5,950 mm, construction height: 3,410 mm, operating hours: 3 h, fuel type: electric, mast type: duplex, Manufacturer + model LINDE V ( 5213 ) Mast 2W5950 ID 23079.5136 Redsymgzyjpfx Ag Njp 2W mast Lowered height 3410 mm Lifting height 5950 mm Capacity 1200 kg Platform height 5350 mm Picking height 6950 mm Cabin widht ; 1200 mm Year 2019 Hours 3 hours Capacity 48 v / 465 ah OptionsFULL options !!! - SAFETY doors with NEIG FUNCTION !!! - Equipped with side guidance ( INCLUDING side roll / wheels !!! )Complete NEW / Unused !!!

Condition: new, Year of construction: 2017, load capacity: 1,000 kg, lifting height: 4,200 mm, construction height: 2,900 mm, operating hours: 4 h, fuel type: electric, mast type: duplex, Manufacturer + model LINDE V ( 5213 ) Mast 2W4200 ID 22073.7130 2W mast Forks 1450 x 620 mm Lowered height 2900 mm Lifting height 4200 mm Capacity 1000 kg Platform height 4350 mm Picking height 5950 mm Year 2017 Hours 4 hours Capacity 48 v / 465 ah Options Rodpfx Agsymgztj Nep DEMO !!! NEW / UNUSED !!!!Cabin = 1100 mm equipped with side guidance ( INCLUDING side roll / wheels )