Used Heating Rail for sale (31,840)

Condition: ready for operation (used), Year of construction: 2000, Recirculating air thermal cabinet / warming oven / drying cabinet / drying oven Alltherm WS 3750 - 1.5 - E - 24l The heated cabinet is equipped with two separately controllable chambers. Maximum temperature per chamber: 250 degrees Celsius Approximate dimensions: Left chamber: Height 167 cm x Width 131 cm x Depth 91 cm Right chamber: Height 167 cm x Width 145 cm x Depth 96 cm Approx. external dimensions of the entire oven: Length 380 cm x Height 250 cm x Depth 128 cm The left chamber is additionally fitted with a viewing window. Fpsdpfx Aaswuqvrobjn Location: Siegen ____ Our general terms and conditions apply. The seller assumes no liability for typographical or data transmission errors. The information and images were provided by the owner and released for publication. The appearance of the items on offer corresponds to their age and the photos shown. The technology and wear and tear of the items offered are age-appropriate. Used machines are sold exclusively to commercial customers and without warranty.

Condition: as good as new (ex-display), Year of construction: 2017, Siemens BD2 BD-2 busbar - busbar system Compatible with the Klöckner Möller BD 2 rail including connector, end cap and holder Type BD2 - 400 amp - 5 pole (L1 L2 L3 N PE) Are available : 41.6 running meters (13x 3.2m) 400A rail, almost as good as new 19.2 running meters (6x 3.2m) 630A rail, used (Klöckner Möller) Fpodpfx Aecumxcjabsn Voltage Ui max. 660V, frequency 16.66 - 60 Hz Tap-off boxes with the following current strengths are also available: 25 - 50 - 125 - 160 - 250A We can offer you a complete system. Prices are per linear meter The dismantling was carried out by a qualified electrician. Busbars are in MINT condition!!!! Please inquire about lengths or accessories! Stock items, available immediately!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system? Demag KBK systems, column slewing cranes, wall slewing cranes are available multiple times!!!!

Condition: excellent (used), Year of construction: 2006, Vitoplex 300 105Kw Year: 2006 Type:TX3 Fsdpfxstu Tv Aj Aabjpn Power: 105Kw With gas or oil burner Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, Equipment: documentation/manual, Hydraulic press for versatile use as an assembly press, small series press, manual insertion press or heating press in double column press design (H-press) The press can be inspected at the Ennepetal warehouse. It is a 2.5 year old, unused press without operating hours, which is sold with full warranty. List price: 45.000 € for a special price of 28.000 € Technical details: Robust machine frame Capacity: 30 tons - at 300 bar Pump ASC: 28.5 liters/min. Engine: 11 kW - 15 hp Oil tank: 600 × 450 × 500 mm - with approx. 100 liters Cylinder piston: Ø 110 mm Cylinder inside: Ø 70 mm Stroke: 500 mm Forward speed: 45 mm/s Return speed: 55 mm/s Fodpfx Aaou U Ey Iebspn Guides: Ø 50 mm Table top: 800 × 550 mm - with T-slots Plunger plate: 700 × 500 mm - with T-slots Total weight: 2000 kg Valves from BoschRexroth Control cabinet technology from renowned manufacturers Table size of the press table 700 × 500 × 70 mm Table height 800 mm, from hall floor Cylinder dimensions / piston rod 110 / 75 mm Plunger size 700 × 500 × 80 mm Emergency switch Rear protective cladding made of painted mesh Lighting in the press area Closed at the rear and sides 500 mm high light curtain with 14 mm resolution (finger protection) Maximum distance between table top and ram 500 mm Cylinder travel 500 mm Front open width 820 mm Press pressure adjustable from 5 to 30 T via rotary control Travel speed downwards 50 mm, upwards 40 mm per second Total weight approx. 2000 kg Paintwork in RAL (light gray) 7035 and RAL 2009 (orange) Assembly, commissioning, instruction for a separate charge CE declaration and documentation in German Plunger plate with two guide columns Resettable piece counter Position limitation via cam switch Adjustable two-hand control with 3 m supply cable Safety test with certificate from an authorized company There are movable sensors on the right-hand side to limit the travel distance. These can be used to set a specific travel distance, for example 300 mm. The press then automatically moves up to the preset point at the touch of a button. The ram plate is guided by 2 guide columns. The rear of the press is closed, but equipped with air outlet openings. There is an ejection chute in the table. Light barrier with under-grip protection. Mountable overgrip protection. Optional: 2 heating plates, 500 × 500 mm heating surface, total size 550 × 550 mm, with controller, up to 200 degrees, incl. insulating plate, 20 mm thick, with timer Optional: Commissioning and training Delivery time Currently a delivery time of approx. 2 weeks is to be expected (without heating plates) Heating plate delivery time approx. 4 weeks. Customer service: From Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen or Gelsenkirchen

Condition: like new (used), Spare parts for Lisec frame bending system type: BSV-45, Length: 2040mm, Fedeualqkopfx Aabspn Width: 65mm, Height: 22mm, Weight: approx. 20Kg,

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 19-95-95822, power: 1,400 kW (1,903.47 HP), heating capacity: 1,400 kW (1,903.47 HP), For sale dismanteled Schmidt utsk 1400-22 boiler, 1400kw, Fpedpfx Aasu Upqkeben

Condition: new, Year of construction: 2024, functionality: fully functional, sheet thickness (max.): 5 mm, coil weight: 10,000 kg, coil width: 800 mm, GUARD RAIL PRODUCTION LINE ROAD SAFETY BARRIER HIGHWAY BARRIER 3M / 3 WAVE PROFILE C POST PROFILE SIGMA PROFILE OMEGA PROFILE RAY-A PROFILE RAY-B PROFILE RAY-A PROFILE RAY-B PROFILE SIGMA PROFILE C PROFILE OMEGA PROFILE Consists of: DECOILER Hydraulic Expansion 10 Ton Capacity SERVO FEEDER STRAIGHTENER HYDRAULIC PRESS STAMPING TOOL DIE MOLD ROLL FORM FLY SHEAR DESTACKING STACKER CONVEYOR BOSPORAS Machinery provides a complete turnkey metal roll forming solution with high quality and competitive prices. Fedpsh Dzi Tsfx Aabjpn The lines that we are experienced: GUARD RAIL PRODUCTION LINES C, U, Z, AND SOLAR PANEL PROFILE PRODUCTION LINE LOGISTIC WAREHOUSE TRAVERSE PRODUCTION LINE CABLE TRAY PRODUCTION LINE MARKET SHELVING PRODUCTION LINE SUSPENDED METAL CEILING PRODUCTION LINE SOLAR FRAMING AND RACKING PRODUCTION LIGHTING FIXTURE BODY AND LID PRODUCTION LINE PANEL RADIATOR TOP AND SIDE COVER PRODUCTION LINE METAL GRID AND PLANKS PRODUCTION LINE METAL DOOR AND DOOR FRAME PRODUCTION LINE PVC WINDOW GYPSUM BOARD PROFILE PRODUCTION LINE AGRICULTURE AND ANIMAL HUSBANDRY PRACTICES AGRICULTURAL VEHICLE APPLICATIONS PAINTING PLANT PANEL PRODUCTION LINE AUTOMOTIVE INDUSTRY APPLICATIONS COIL PUNCHING APPLICATION HOUSEHOLD APPLIANCES INDUSTRY APPLICATIONS

Condition: good (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamp sleeve, sliding gate sleeve, helmet rail branch -Manufacturer: Helmet, branch for helmet rail -Type: Width 65 mm -Dimensions: see photos -Number: 1x branch available Fpodpfx Aswx E Dxoabjn -Transport dimensions: 960/390/H90 mm -Weight: 9.9 kg

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III The system is available twice, price per unit Note: The machine is still installed and can be inspected on site. Fpedpfx Asw Hxgvsabon The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Condition: excellent (used), Here we offer a Mytron drying oven. The drying oven WT 850 is used for simultaneous drying of several products or auxiliary devices in the semiconductor industry. Due to its robust construction (box section frame) and the use of stainless steel material for the heating chamber, the drying oven WT 850 is universally applicable. The trolley enables the WT 850 drying oven to be moved in and thus easily loaded. An exhaust air connection with control flap enables the connection of the oven to a central exhaust system. Technical data: Outer dimensions: Width 1145 mm x height 1880 mm x depth 1810 mm dimensions of the heating chamber: width 850 mm x height 690 mm x depth 1410 mm Volume of the warming chamber: approx. 830 liters mass: ca.230 kg, trolley 50 kg temperature range: 10°C above room temperature to + 120°C spatial temperature constancy: ± 1°C temporal temperature constancy: ± 1°C Mains connection: 3NPE AC 50 Hz 400 V, 16 A CEE plug power consumption: 4,5 kVA fuse protection: 3 x 16 AT, 1x 6 AT Control: digital controller Safety device: adjustable overtemperature protection Feed-through opening: Exhaust air spigot 100 mm with control damper on top Supply air spigot 100 mm with control damper on top Type: WT 850 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Fedpfx Aeiwyiwoabopn Further questions we can answer on the phone for you.

Condition: like new (used), Year of construction: 2011, Operating temperature: max. 150°C. Interior dimensions: WxDxH: 1395x2030x1115 mm. External dimensions, incl. superstructure: approx. 1970x2300x1860 mm. Fedjvntzfspfx Aabepn Interior accessible from two sides via hinged doors. Connected loads: 3~400V/50H/15.55 kW. The unit is unused!

Condition: good (used), Year of construction: 2017, functionality: fully functional, power: 246 kW (334.47 HP), For sale are two Viessmann Vitocrossal 200 CM2B gas condensing boilers, each with a nominal output of 246 kW. Both boilers were installed in 2017 and are in very good condition. The units have been regularly serviced and were only in use for 8 years. Due to the conversion of the property to district heating, the boilers are now available. They have already been decommissioned and are completely disconnected from the system. Technical details: • Manufacturer: Viessmann • Model: 2 x Vitocrossal 200 CM2B • Year of manufacture: 2017 • Nominal output per boiler: 246 kW • Fuel type: Natural gas • Condensing technology • Output range: 75-246 kW • Burner type: Blower burner for natural gas • Boiler type: Condensing boiler • Heat exchanger: Viessmann, model no.: 7554521701096109 Inspection protocols and maintenance: • Last inspection: 06.02.2024 • Inspection according to §1 KÜO (Chimney Sweeping and Inspection Regulation): Both boilers with no defects detected Fjdpfx Aaow H Sbbjbjpn • Emissions test results: CO content in exhaust gas 34 ppm (within standard range) • Measurements: Exhaust gas content 6.70%, no defects found • Last maintenance: 31.10.2024, no faults Optional accessories: • Burners • Flue components (e.g., flue pipes, exhaust gas routing systems) • Heat exchangers • Control units • Additional parts: expansion vessels, safety group, neutralization unit Condition: • Both boilers are in perfect condition and have been regularly serviced. • No visible damage, no rusting. • Safety inspections successfully completed. Availability: • The boilers are already decommissioned and disconnected from the system due to conversion to district heating. • Collection by the buyer is required. • Transport: Robust boxes, bubble wrap, and Euro pallets are necessary for transport. The buyer is responsible for organizing transport.

Condition: reconditioned (used), Thermal oil heating boiler Daub KO 300 - completely overhauled Fodpfxjw Iqkze Aabspn - new magnetic pump 7.5 kW - electrical system - new gauges - perfect condition - new soft start for the motor

Condition: used, mileage: 69,510 km, power: 250 kW (339.91 HP), first registration: 06/2011, fuel type: diesel, axle configuration: 4x2, fuel: diesel, wheelbase: 4,130 mm, gearing type: automatic, emission class: euro5, Year of construction: 2011, = Additional options and accessories = - PTO (Power Take-Off) = Further information = Technical data Number of cylinders: 6 Engine displacement: 6,871 cc Maximum front axle load: 7,500 kg Maximum rear axle load: 11,500 kg Dimensions Dimensions (L x W): 740 x 240 cm Weights Unladen weight: 13,401 kg Payload: 5,199 kg Gross vehicle weight: 18,600 kg Fedpfx Aasw I Ay Usbepn Financial information Price: On request Further information Contact John de Koning or Mark de Koning for more information.

Condition: excellent (used), Abus Kransysteme GmbH LPK mobile rail crane, excellent condition, very little used. Technical parameters: 2 T x 4000 mm x 4400 mm. Power connection: CEE Control: Controlled from the floor with a wired control panel. Overload protection: Mechanical friction clutch. Fpsdpsvy Ecljfx Aabjn If you have any further questions, we will be happy to answer them.

Condition: good (used), LAC Heating oven SV6000/25 Temperature range +20 to +250°C TESTO software Weight: 1750 kg 6000 liters Fjdpfx Aaouugaqobepn Outer dimensions 2850×2000×3700 mm Test chamber dimensions 2000×1500×2000 mm Oven switch 100/3 Max. Floor load 2000 kg Circulation 3000 m3 /h Nominal power 66 kW Nominal current 98 A Voltage 3/N/PE 400/230V AC 50 Hz Weight 1750 kg Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Viessmann Vitoplex 225kW boiler, gas or oil burner possible Fpsdpfx Aew Ey Dmsabon

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: KA28 - 14/796737, ABUS overhead crane, crane runway, bridge crane, workshop crane, overhead travelling crane Equipped with ABUS technology Fpsdpfx Aaow Hnvtobsn Load capacity / lifting capacity 1.6 t - 1,600 kg Span 9,550 mm, external dimension approx. 9,700 mm Year of manufacture 1998, floor control and scale included Crane is equipped with super fine lifting – speed 0.08–0.8 / 5 m/min Lifting height 6 m Hoist: GM816 L6-204.41.064.E Overall height from top edge of crane to hook approx. 710 mm (320 mm beam + 390 mm hoist) End carriage length without buffers approx. 150 cm Optionally, 2 x 40 m HEA240 crane rails available Crane is dismantled and immediately available Very good condition, inspection logbook available Column slewing cranes and wall-mounted slewing cranes are also available Demag KBK and ABUS HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder possible, please inquire with zip code Collection preferred

Year of construction: 2018, condition: excellent (used), EFD Type: MINAC 6/10 SM Heat treatment The compact design of the Minac induction heating system allows for easy installation and offers fast, concentrated and controlled heating with full repeatability. repeatability. Medium frequency product line Technical data: Maximum output power 10 kW Continuous output power 6 kW Mains voltage 400-480 V Frequency range 10-25 kHz Control range of output power 2-100% Recommended back-up fuse 16 A Cooling water approx. 4 l/min Cooling water flow temperature min./max. 18 - 35°C Cooling water pressure min./max. 4 - 6 bar Weight approx. 50 kg Dimensions (WxDxH): 345 x 708 x 453 mm Year of construction: 2018 optris CTlaser infrared thermometer Fjdpst Din Aefx Aabopn Abbreviation: 3ML Measuring range: 50 to 400 °C Spectral sensitivity: 2.3µm Typical application: Metals at low object temperatures (from 50°C) Temperature control ECU 1214C Hyfra eChilly water cooler 4-S Cooling capacity 4395W The device comes from the laboratory sector. Only a few operating hours. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 2011, Buderus GE515 low-temperature 455 kW Fodpew Ey Daefx Aabepn

Condition: used, functionality: fully functional, Year of construction: 1985, machine/vehicle number: KA1 - 16116/16117, Steel crane ceiling, crane runway, bridge crane, hall crane, crane Load capacity / lifting capacity: 5t - 5000kg Track gauge: 9550mm, overall width approx. 9700mm Year of manufacture: 1985 with pendant control Lifting height: 6m Fsdpfx Aaew Hnpgobepn Hoist: ASL3412-20 Construction height (top edge of crane to hook): approx. 900mm Head beam length with buffer: approx. 240cm Attention! The runway rails on this crane are offset in height by approx. 20cm from right to left. This means that one rail would be installed higher than the other! Optionally, 2 x 40m HEA240 runway rails are also available. Crane is dismantled and immediately available Used condition, inspection logbook is available Also available: column-mounted slewing cranes and wall-mounted slewing cranes Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by carrier possible, please inquire with postal code Collection preferred

Condition: excellent (used), EOS Type: P385 similar to a P390 Laser has been renewed and is unused! Plastic laser sintering system for the direct production of series, spare parts, functional prototypes and samples for investment casting or vacuum casting. Machine description: Condition of the machine/system: Dimensions: System P385 (dimensions 2000x1220x1250) Cooler (dimensions 930x610x600) Control panel (dimensions 1580x950x800) Control cabinet (dimensions 2100x610x950) Technical data: Effective construction volume 340 mm x 340 mm x 620 mm Construction speed (depending on material) up to 31 mm/h Layer thickness (depending on material) 0.06 – 0.10 – 0.12 – 0.15 – 0.18 mm Support structure not required Laser type CO 2 , 50 W Precision optics F-Theta lens Scan speed up to 8 m/s Power supply 32 A Maximum energy consumption 10 kW / typically 2.4 kW Integrated nitrogen generator (optional) Compressed air supply at least 5,000 hPa; 6 m³/h Voltage: 3/N/PE/ 400 V AC Frequency: 50/60 Hz Modified surface module from a heated nitrogen flood Connection value: 12 kW Rated short-circuit current: 5 kA Fuse: 3x 32 A Current consumption: 18 A Max. laser power (10.6µm) 100 W Laser class open 4 Laser class closed 1 Weight: approx. 1,060 kg Condition: used Scope of delivery: (See image) Fjdpfx Ajubxkmsabspn (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, functionality: fully functional, Year of construction: 1985, machine/vehicle number: KA1 - 16114/16115, Steel overhead travelling crane, crane runway, bridge crane, indoor crane, crane Crane is available 2x in identical configuration!!! Load capacity / lifting capacity: 3.2t - 3200kg Track gauge: 9550 mm, external dimension approx. 9700 mm Year of manufacture 1985 with pendant control Lifting height 6 m Hoisting unit ASL308-16 Overall height from top of crane to hook approx. 900 mm Fpjdpfew Hnmrex Aabon End carriage length with buffers approx. 240 cm Optionally available: crane rails 2x 40 m HEA240. Crane is dismantled and immediately available Used condition, inspection book is available Column-mounted jib cranes and wall-mounted jib cranes are also in stock Demag KBK and Abus HB systems as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight carrier possible, please inquire with postcode Collection preferred

Condition: excellent (used), GH Induction Type: 30 SMBC Transistor generator for inductive heating Medium frequency with series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, simple operation and high efficiency) in a series resonant circuit and a compact design, Fpsdpfx Aob E I Utsabon with cooling enclosed in the generator enclosure. Rittal generator cabinet and GH induction TC150 / 2 resonant circuit Voltage 400V Frequency 50 Hz Current 56 A Power 37.5 KVA as good as new condition! Scope of delivery: Transistor generator, Rittal generator cabinet with cooling and TC150 / 2 resonant circuit (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VTL 60/60 The Vötsch VTL 60/60 is an industrial heating and drying cabinet, specifically designed for the safe drying of coated materials, such as paints and resins. It meets the safety requirements of EN 1539 and is therefore suitable for processes where flammable solvents may be released. Technical specifications: Usable volume: 0.216 m³ (600 × 600 × 600 mm) Nominal temperature: 250 °C Maximum heating surface temperature: over 750 °C Nominal power: 7.2 kW Connected load: 8 kW Minimum exhaust air flow rate: 102 m³/h External dimensions (L × W × H): 1150 × 1000 × 1700 mm Weight: approx. 250 kg Safety features: The VTL 60/60 is equipped with a powerful recirculation fan, which ensures even temperature distribution and effective dilution of solvent vapors. This prevents the formation of explosive atmospheres and ensures safe operation. Condition: Used Scope of delivery: (See image) Fpjdpjwgcxcjfx Aaben (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.