Used Hermle Fwh 600 for sale (123)

Year of construction: 1987, condition: ready for operation (used), Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferred. Crsdpfx Aaey I Adhe Nsb

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm Crjdpfjy Dh U Dsx Aa Neb z-travel 500 mm rapid traverse 10 m/min table dimensions 1.200 x 550 mm spindle tunring speed 20 - 4.200 U/min spindle drive 7 kW tool taper SK 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door Crodpoygx Hnofx Aa Nsb - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, overall weight: 12,500 kg, controller model: iTNC 530, rotational speed (max.): 18,000 rpm, General Data Measurements width 3970 mm Measurements depth 4629 mm Dqmcjh Measurements height 3050 mm Machine weight 12700 kg Main Drive Number of spindles 1 Spindle speed range 16000 rpm Spindle motor power 10 kW Tool taper SK 40 Number of axis 3 Movement X-Axis Movement 1200 mm Y-Axis Movement 900 mm Z-Axis Movement 500 mm Cjdpfx Asvambija Norb Table Outer length 1400 mm Outer width 900 mm This 3-axis HERMLE C 1200 V vertical machining centre was manufactured in 2003. It features a robust clamping table measuring 1400 x 900 mm and a high-performance milling spindle with a maximum power of 10 kW, torque up to 87 Nm, and speeds up to 16,000 RPM. Ideal for complex machining tasks, the HERMLE C 1200 V machine we have for sale offers precision and durability. Tool magazine can be dismantled so the width can be reduced to 2450 mm. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg Cedex Ry Atepfx Aa Njrb EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 - 6,300 rpm Tool holder: SK 40 M & H 3D probe (for workpiece measurement) Vertical-horizontal milling attachment Crjdpfx Aaov Rxa So Njb Quill Coolant system Angle table: 900 x 458 mm Weight: 4,000 kg Machine dimensions (LxWxH) approx.: 3,900 x 2,000 x 2,000 mm

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swivel table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Credpov Rpr Sofx Aa Nsb Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 35,044 h, spindle speed (max.): 10,000 rpm, total height: 3,000 mm, total width: 2,500 mm, overall weight: 11,000 kg, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 16,800 W, product length (max.): 2,500 mm, table load: 500 kg, tool weight: 8,000 g, number of slots in tool magazine: 82, number of axes: 3, This 5-axis HERMLE C40U Dynamic universal machining centre was manufactured in 2011. It features a travel of 850 mm in the X-axis, 700 mm in the Y-axis, and 500 mm in the Z-axis. The machine has a maximum spindle speed of 10,000 rpm and a magazine capacity of 38 positions plus 43 additional. If you are looking to get high-quality machining capabilities, consider the HERMLE C40U Dynamic machine we have for sale. Contact us for further details. • Utilization: 70% • Shifts: 2 • Operating hours: 35,044.4 h • Rotary table diameter: 420 mm • Clamping surface diameter: 420 mm • Spindle: • Power at 40%: 1500 rpm = 25 / 16.8 kW; 10,000 rpm = 7 kW • Torque at 40%: 1500 rpm = 159 / 107 Nm; 10,000 rpm = 6.7 Nm • Tooling/magazine: • Number of revolvers/magazines: 2 • Magazine capacity: 38 positions • Additional magazine + 43 positions • Maximum tool length: 300 mm • Maximum tool diameter: 140 mm • Knoll Cooling • Renishaw OMP 40 probe • IKZ (inner cooling through spindle) • Laser beam monitoring • Chip conveyor • SK 40 • Operating voltage 400 V/3~ • Mains frequency 50 Hz • Control voltage 24 V- • Total nominal current 60 A • Total performance 41 kVA Additional equipment • OPTIONAL for an additional charge: Tooling package available: approx. 530 tools • OPTIONAL for an additional charge: Zero-Point Clamping SystemMachine was maintained in 2025 by HERMLE officialIn August 2025, the spindle head was replaced and the geometry was checked and adjusted again by HERMLE official Technical Specification Crsdpfx Aaoy Al Ufj Neb Taper Size SK 40

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Hermle UWF 802M with HS 401 Path Control Super CONDITION CE Compliant!! Technical Data: >> Year of manufacture: approx. 1995 Machine No. 10064 >> Fixed angle table >> Spindle speed: 17 to 3,550 rpm >> Infinitely variable feed on 3 axes from 0 to 1,600 mm/min >> Drive power: 6 kW >> Travel X/Y/Z: 500/430/400 mm Csdpfx Aaeyzzb Eo Nsrb >> Vertical and horizontal quill - SK40 >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Dimensions: Length 1.8 m, Width 1.8 m, Height 1.9 m Accessories and Equipment: >> HS 401 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare part diagrams, operation manual for the control system, and programming examples About the machine: For sale is a Hermle UWF 802M tool milling machine with HS401 path control and CE compliance. This universal milling machine is in very good condition. It features a very user-friendly path control system. Length and radius compensation can be programmed without requiring extensive CNC knowledge. Of course, the Hermle can also be operated manually without the control. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple by tilting the vertical head. The guides are regularly lubricated by the central lubrication system. The Hermle has been mechanically and electrically tested by us. Take the opportunity to view and test the Hermle under power on site.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 13639, Control Heidenhain X-Way 1,200 mm Y-way 800 mm Z-way 500 mm Main spindle: Speed 16,000 rpm Drive power - main spindle 17 kW Spindle Tool holder Type HSK63 Spindle diameter in front. Bearing 70 mm Upgraded Tool changer Size: 100 Swing round table: Round table diameter 800 mm Swivel range A: -15 / + 97° rotatable C: 360° max. table load approx. 1,000 kg max. tool diameter 80 mm max. tool byway. with free neighbor box. 125 mm Crjdpfx Aeinh Rqoa Neb max. tool length 300 mm max. tool weight 8 kg Feeds: Rapid response ( X / Y / Z ) 30 m/min Total power requirement 31 kVA Machine weight 15 tons Space requirements approx. 6.0 x 5.0 x 3.6 m other equipment - Documentation - Chip conveyors - electronic heat compensation Y- + Z-axis

Condition: used, Year of construction: 2003, travel -x axis 1.200 mm travel -y axis 900 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 16.000 U/min tool taper SK 40 milling spindle dia. in forward position 70 mm table surface area 1.400 x 900 mm Milling machining centers - vertical | HERMLE - C 1200 V equipped with tool changer. The machine is in a well-maintained condition. Crodpfx Aajx E Dr Is Nsb Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C1200 V | C-1200 V | C 1200-V | C1200V

Condition: used, Year of construction: 2005, control HEIDENHAIN - iTNC 530 number of spindle speeds 18.000 U/min tool taper HSK-A63 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & pallet changer. The machine is in a well-maintained condition and can be inspected under power at any time in the Swiss factory location. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. Crjdeyy A Nuepfx Aa Neb - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: used, Year of construction: 2009, travel -x axis 600 mm travel -y axis 450 mm travel -z axis 450 mm control HEIDENHAIN - TNC 530 number of spindle speeds 18.000 U/min tool taper HSK-A63 numbers of positions in the tool changer 120 Credpeyy A N Uefx Aa Nob 5-axis simultaneous machining center | HERMLE - C 20 U equipped with ITC (80 bar), NC swivel rotary table, 120-way tool changer & pallet changer. The machine is in a well-maintained condition and can be inspected under power at any time in the Swiss factory location. The machine videos from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 20 | C20 | C-20 | C20U

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 720 mm, travel distance Z-axis: 630 mm, CNC control Heidenhain iTNC530 NC-rotary table NC-swivel head 28-fold automatic tool changer electronical hand wheel chip conveyor coolant through spindle Technische Daten / technical details: Verfahrweg X / X-Travel 1300 mm Verfahrweg Y / Y-Travel 720 mm Verfahrweg Z / Z-Travel 630 mm Tischgröße / table size 1000x800 mm Werkzeugschaft / spindle taper HSK63 Drehzahl / spindle speed 12000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 28 Gewicht der Maschine ca. / weight ca. 8500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Codoyyiw Eepfx Aa Norb

Condition: used, Year of construction: 2005, 5-Axis Simultaneous Hermle U740 Travel: X-915 mm, Y-500 mm, Z-500 mm Control: Heidenhain iTNC530 Spindle speed: 18.000 U/min Credpfxoyxh Sfs Aa Njb Spindle mount: SK40 tool magazine: 16 seats B-axis: hydraulic clamping –5°/+95° NC rotary table: 630 mm max. table load: 500 kg probe: Heidenhain electric handwheel: Heidenhain table size: 1000 mm x 560 mm Spänewanne: .

Condition: excellent (used), Year of construction: 2013, Travel: X-800 mm, Y-600 mm, Z-500 mm Control: Heidenhain iTNC530 Spindle speed: 15.000 U/min tool magazine: 30 seats Crodpfxsyxh Hpo Aa Njb probe: Heidenhain electric handwheel: Heidenhain table size: 1000 mm x 560 mm Spänewanne: .

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 11721, Description: Control: Heidenhain TNC 430 Working range: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Tool holder: HSK40 Spindle speed Max 8,000 rpm Tool magazine: 30 places Max. Tool diameter: Ø 80 mm; with adjacent free spaces Ø125 mm. Max. Tool length: 300 mm. Max. Table load: 1,500 kg Credotq H Sqspfx Aa Njb Dimensions and weight: Machine weight: approx. 7,200 kg Machine dimensions approx. : Width: 3.7 m; Depth: 4.3 m; Height: 3.0 m.

Condition: used, feed length X-axis: 430 mm, feed length Y-axis: 420 mm, feed length Z-axis: 230 mm, overall weight: 800 kg, FW 801 Conventional Milling Machine Technical data: x-travel: 430 mm y-travel: 420 mm z-travel: 230 mm Spindle taper ISO: SK40 Speed range: 40 - 2800 rpm Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Crodpfey A Tlrsx Aa Nsb Weight: approx. 800 kg Including the milling cutter shown. Inspection under power possible. Shipping available at extra cost.

Condition: excellent (used), HERMLE C 42 U is a 2 x 5‑axis machining centres with loading robot, engineered for high precision and reliability. Table 400×400 mm, table load 450 kg, travels X800 Y800 Z550 mm, A ±130°. Spindle HSK‑A63 0–18,000 rpm, 42 kW, 148 Nm; rapid 45/45/40 m/min. Tool magazines 42+160, 54 pallets, KUKA robot, coolant 80 bar, Renishaw/BLUM. Suited for tight tolerances in automotive, aerospace, watchmaking, medical. Codpfsyxn Dnsx Aa Norb

Condition: used, HERMLE B 300 is a 5‑axis machining center engineered for precision, high accuracy and production reliability. Working capacities: travels X 800 mm, Y 600 mm, Z 500 mm; table load max 250 kg; A‑axis ±110°; C‑axis 360°; max tool Ø 125 mm, tool length 300 mm, max tool weight 8 kg. Key specs: spindle taper HSK‑A63; spindle speed 20–15,000 rpm; spindle power 10 / 19 kW; rapid traverse 30 m/min; acceleration 5 m/s; max feed force 8,000 N; supply 3x400 V 50 Hz; total power 31 / 43 kVA; machine weight ≈ 8,500 kg. Equipment: 30‑position tool magazine, 1,000 L coolant system, BLUM tool breakage monitoring. Delivers tight tolerances; suited to automotive, watchmaking, aerospace, medical and toolmaking. Crodpfx Aaoyxnt Ao Nsb

Condition: not inspected (used), Tool Milling Machine HERMLE UWF 802 M - Travel Control HS 401 - Travel X/Y/Z: 500x430x400 mm - Spindle speed range: 18–3550 rpm - Stepless feed on all three axes - Rapid traverse 0–1.6 m/min on all three axes - Vertical and horizontal milling device - Tool holder ISO 40 - Hydraulic tool clamping - Central lubrication - Drive power: 6 kW - Work lamp - Chip tray - Documentation Csdpoy Ddz Hjfx Aa Norb Dimensions (LxWxH): 1.9x1.8x1.9 m / Weight: 1900 kg Errors and omissions excepted.

Condition: ready for operation (used), machine/vehicle number: 5722, table mounting size: 190 x 710 mm Credpfxeflrg Ts Aa Nob table movement x: 390/360 mm table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 27,167 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 500 mm Spindle speed: 18,000 rpm Tool holder: HSK-A63 Table type: NC-SRT 420 mm Table specification: Pallet clamping system Pallet changer: PW160, 400 x 400 mm MACHINE DETAILS Control: Heidenhain iTNC 530 Crjdpfsyzyttox Aa Njb Internal coolant supply: 80 bar Frequency: 50 Hz Operating hours: 27,167 h EQUIPMENT - Heidenhain DNC - DXF import - Kinematic Opt iTNC - Automatic cabin door - Additional magazine: ZM43 - Linear guides: Dynamic version - Rotary table axis: A-axis (not centered) - Manual cabin roof - Laminated safety glass window - Pallet storage - External MQL (minimum quantity lubrication) - Tool breakage monitoring A2 Blum - Heidenhain touch probe - Preparation for additional touch probe - Event Messenger - Tool identification HSK - Machine license TCS-Soflex - Electronic thermal compensation - Electronic hand control module - Oil mist extraction (prepared & with after-filter) - Flange for oil mist extraction - Sealing air for measuring units - Chip flushing pistol - Machine bed flushing - Internal & external air blast - Signal light - Coolant filter type: Paper band filter for coolant system - Scraper belt conveyor - Test protocol: C 40 iTNC 530 PW160

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TC 530, spindle motor power: 15,000 W, swivel angle C-axis (max.): 360 °, number of axes: 5, This HERMLE C30U Vertical Machine Center was made in the year 2006. It is equipped with a HEIDENHAIN TC 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. There are 2 identical units available. Machine Benefits Technical Machine Benefits • Maximum tool capacity 32 Codpfx Aaex D I Sas Nsrb • Spindle connection (spindle) din 69871 • Renishaw system predisposition • Air blow through dry machining spindle: yes • 5 axis continuous package: yes • Internal cooling

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds Cedpfxjylw Stj Aa Norb • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40