Used Hf Welding Machine for sale (66,433)

Condition: used, Year of construction: 1992, machine/vehicle number: 920544, current capacity:100 kVA throat:280 mm capacity at 50%:100 kVA pressure:1,1 t stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R total power requirement:279 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,15 x 2,1 m spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off Blsdpfx As Ad Shvoktsp

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: Bodsykvdlspfx Aktjlp - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: not inspected (used), Stud welding machine Bsdpfx Aoy Ihbxoktslp Manufacturer: NELSON Type: FSE 100 / FSE 500 Includes welding head, hoses, and control cabinet 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Price per unit. Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), 3-phase DC spot welding machine, A/DH version Brand DALEX Type PMS 14-5 G3 Thrust: 550 mm Rated power at 50 & duty cycle: 150 kVA Secondary short-circuit current: 65 kA Secondary open-circuit voltage: 3.35 - 6.7 V Electrode force: 80-1,200 daN Weight: 1,620 kg Blsdpfev Uwyrex Aktjp with double-stroke cylinder 4-position switch Main switch Mounted control cabinet according to VDE 0110 with 100-program MPS 8043/1 welding controller

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, throat depth: 430 mm, nominal power at 50% duty cycle: 88 kVA, type of cooling: water, overall weight: 279 kg, Electrode holder, electrode arms, transformer and water-cooled electrodes Welding controller with graphic display Medium-frequency technology / inverter Blodsyvx Hzjpfx Aktsp Welding controller PY800 Electrode stroke 60 mm Water requirement 9 L/min

Condition: used, total width: 800 mm, total height: 1,600 mm, total length: 1,200 mm, Empty weight: 500 kg - Documentation available: No - CE certificate present: No - Serial number: 4234 - Power [A]: 450 - Power [kVa]: 50 - Transport dimensions: 1200mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 500kg Bodpfowyktnex Aktelp - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Medium frequency 1000 Hz spot welding machine, 400 V 50 Hz Make: DALEX Model: PMS 11-4 MF Arm reach: 950 mm with double-acting cylinder Bedpfx Aevyk Sfektslp Rated power at 20% duty cycle: 180 kVA Secondary short-circuit current: 37 kA Secondary open-circuit voltage: 9 V Electrode force: 60-600 daN Weight: 550 kg

Year of construction: 2011, condition: ready for operation (used), Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: ca. 1800mm/1100mm/1600mm, Gewicht: ca. 2300kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich. Bledpfxswfg Eds Aktjp

Year of construction: 2013, condition: excellent (used), Ultrasonic welding system Manufacturer: KLN Stock number: Year of manufacture: 2013 or 2009 Bljdpfevxppaox Aktsp Type: PXO number P600031440 MXO number M60413293 Equipment: the system consists of two stations, Individual sale possible Price: EUR 5,000 per station Price including 19% VAT: EUR 5,950 per station

Condition: excellent (used), Year of construction: 1996, ESAB LHF 400 Welding Rectifier / Electrode Welder Blodpfxjv N Hkcj Aktsp Infinitely variable welding current range up to 400 A, power 400 A at 35% duty cycle, 315 A at 60% duty cycle, weight 165 kg, ... Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, warranty duration: 6 months, type of cooling: water, overall weight: 4,000 kg, working width: 1,000 mm, Schlatter NQD - Cross seam welding machine - Overhauled We offer here a completely overhauled Schlatter NQD cross seam welding machine. The delivery time of the machine is approx. 4 months. Welding heads: 4 pieces Travel distance: 950mm Welding speed: up to 12 meters / minute The machine is only for sale as reconditioned / as good as new. With kind regards Bodpju Tqhhefx Aktelp T. Becker

Condition: used, Capacitor discharge welding machine MEGATRONIC, type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimal welding times. Bjdpfxsguvtdj Aktelp Spot and projection welding machine The CD (Capacitor Discharge) welding technology works according to the principle of transformed capacitor discharge. Year of manufacture: 1993 Very high welding performance with a relatively small mains connection. - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat-sensitive components - welding of steels with high carbon content - welding of surface-coated workpieces Rated power: 12288 Ws Uc: 3200 Volt Capacity: 2400 µF Open-circuit voltage: 10 Volt Electrode force: 200-2000 daN, continuously adjustable Operating air pressure: 6 bar Mains fuse: min. 35 Amp. Operating current: 32 Amp. Mains connection: 400 Volt, 50 Hz - Programmable control unit megapuls CD-12000 - Parallel electrode guidance - Electrical 2-hand control panel located beside the machine - Control cabinet with control unit fixed to the machine Weight: 3000 kg Good condition

Condition: used, Year of construction: 2015, Offer 26163 Technical data (approximate): - Maximum workpiece diameter: 80 mm - Overhang: 70 mm - Welding torch stand adjustable in X, Y, and Z Bljdpfx Akjzg A Rijtjp - Stand travel via handwheel: 500 mm - Stand overhang: 70 mm - Distance between centers: 600 mm - Tailstock with pneumatic pressure spindle - 3-jaw chuck: 100 mm - Hand-held remote control - Connection cable - Pneumatic connection - Table frame: W 2000 x H 850 x D 700 mm - Footprint (approximate): W 1150 x H 650 x D 500 mm - Weight (approximate): 200 kg

Condition: used, total power requirement:6,5 kW dimensions of the machine ca.:0,9 x 0,5 x 1,25 m Blodpe Ad Siyjfx Aktep

Condition: used, MF welding machine with water-cooled projection welding head Medium-frequency projection welding head Manufacturer: TECNA (Italy) Model 3670 E CF00 Serial No.: Year of manufacture 2014 Bsdpfx Akjg U A Uzjtslp Rated welding power 25 kVA Max. welding power 160 kVA Mains connection 400 Volt, 50 Hz - Welding control TE750 or TE760 - Projection welding head for single-sided spot welding - Ideal for repair work in the bodywork area, ensuring the best welding quality - Water-cooled, type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - like new

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped Device description/scope of delivery: Fronius TPS 4000 fully equipped device - you can't get more than this! - Pulse 400 Ampere power source - FK 4000 FC cooling unit with optional filter including flow control (==>if no water circulates, the device shuts down to protect the hose package). - VR 4000 with optional rollers underneath + long connecting hose package + metal feed rollers - only the best of the best. - Fronius Aw5000 hose package with Job Master function on the torch (==>display on the torch / amperes, job, feed, arc adjustable on the torch) Photo = scope of delivery. All prices quoted are starting from prices. Prices are calculated individually according to your configuration requirements. New price approx. €15,000 (net). We are offering it for 1/3 the new price. Not comparable to Transsteel junk. Why buy from us rather than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have around 60-80 units in stock. Only these Fronius devices, not other manufacturers! - We don't just push the devices through; we disassemble them, test them, replace wear parts, and only sell them when everything is working perfectly. - All our devices are sold with the popular Fronius welding torches. NOT a 100-euro buy-it torch, but QUALITY! The Fronius welding torches cost between 650 and 900 euros net, depending on the configuration! - Our devices are "all" clean and don't have burn holes in the displays or countless burn holes/dents scattered throughout the device! You're buying an item from us that's worth seeing and doesn't look completely finished! - It's worth buying from us. - As our customer, you have the opportunity to obtain suitable spare parts and support at reasonable prices if necessary. - You will receive a proper invoice with VAT shown. All devices can be inspected, paid for, and picked up at our main warehouse in Vienna by appointment! Insured shipping on pallets is of course possible! All prices are starting from £100. You can configure the devices with us. Robot device or handheld device. Long or short connecting hose package. A wide variety of hose packages to choose from. Synchropuls. 270, 400, or 500 amp devices in stock. CMT version available as handheld or robot. Bsdpfjvlwh Dex Aktelp It's best to call us. We'll discuss your application and give you an initial price estimate.

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC Bljdpfxe Adnv Ao Aktep year of construction 1998 . Model : CB 18 . Series : B20 .

Condition: used, 50 units of Fronius TPS 450 welding machines, used 🧰 Product features • Manufacturer: Fronius • Model: TPS 450 • Condition: used, see photos • Color: red • Mains voltage: 380 V / 400 V / 415 V Blodpfjyn Ii Iox Aktsp • Apparent power: 17.2 kVA • Efficiency: 90% • Welding current range: 3 - 450 A • Working voltage: 20 - 38 V • Open-circuit voltage: 50 - 80 V • Insulation class: F • Protection class: IP 23 • Cooling method: AF • Welding processes: MIG/MAG, MMA, WIG/TIG 💰 Price per unit: €1500 net, excluding VAT • Quantity discounts: available upon request • Shipping costs: available upon request, Europe-wide • Delivery time: immediately available • Inspection and collection: possible at any time by appointment We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty shelving, used & new Description: Are you looking for high-quality warehouse shelving to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of shelving immediately available • 20,000 m² of storage platforms & steel platform structures immediately available • Weekly 30–50 semi-trailer loads of goods turnover for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty shelving, high-bay racking, shelving with shelves, tire racks, or shelving for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty shelving Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough cleaning. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough cleaning. Whether you became aware of us through heavy-duty shelving or are looking for galvanized heavy-duty shelving / heavy-duty shelving systems – we guarantee the best conditions. Contact us for a non-binding offer!

Year of construction: 1978, condition: ready for operation (used), Suitable for PVC films, working width: 940mmm, welding power: 42kVA, welding area: 940x720mm², throughput: 400 cycles/h, length: 8000mm. Bljdpoqu Ubusfx Aktep

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 420 kg, iDEAL BAS 065-11 is a resistance butt welding machine for band saw blades, made in Germany by IDEAL-Werk C.+E. Jungeblodt GmbH + Co., Lippstadt. Serial no. 235529, year of manufacture 2008. Rated power 20 kVA at 50% duty cycle, primary voltage 400 V, 50/60 Hz, secondary voltage 2.5 – 4.0 V, maximum upsetting force 50 kN. Hydraulic clamping (the "-11" version): both clamping jaws are operated hydraulically by foot switch, so the operator keeps both hands free to position the blade. The hydraulic power unit with clamping pressure gauge is mounted on the machine. Welding current is selected with the step switch, flashing speed and annealing time are set on the front control panel, with a Panasonic timer for the annealing cycle. A flexible work light is fitted above the welding zone. Capacity: bi-metal band saw blades 10 x 0.7 – 41 x 1.6 mm, wood band saw blades 10 x 0.7 – 60 x 1.0 mm, stainless steel band saw blades 10 x 0.4 – 35 x 0.8 mm, band knives 10 x 0.4 – 40 x 0.8 mm, strip steel 7 – 100 mm2 cross-section (stainless up to 50 mm2), band thickness 0.4 – 2.5 mm, clamping width 60 mm. The machine is used, in working condition and repainted. Electrical cabinet, hydraulics and controls are shown in the photographs. Machine weight approx. 420 kg net / 480 kg gross, packing dimensions approx. 1150 x 1150 x 1150 mm. Make and Model: iDEAL BAS 065-11 Year of manufacture: 2008 Serial no.: 235529 Clamping: hydraulic, foot switch operation Max. upsetting force: 50 kN Voltage: 400 V Frequency: 50/60 Hz Power: 20 kVA (at 50% duty cycle) Secondary voltage: 2.5 – 4.0 V Fuse protection: 20 A Bi-metal band saw blades: 10 × 0.7 – 41 × 1.6 mm Blsdozz Sdzepfx Aktep Wood band saw blades: 10 × 0.7 – 60 × 1.0 mm Stainless steel band saw blades: 10 × 0.4 – 35 × 0.8 mm Band knives: 10 × 0.4 – 40 × 0.8 mm Strip steel, cross-section: 7 – 100 mm² (stainless up to 50 mm²) Band thickness: 0.4 – 2.5 mm Clamping width: 60 mm Machine weight: approx. 420 kg net / 480 kg gross Packing dimensions: approx. 1150 × 1150 × 1150 mm Condition: Used, in working order

Condition: used, Automatic in-line welding machine for PVC profiles (or similar), with a cycle fully controlled by PLC. Operating cycle: PLC with digital control of temperature and welding/cooling intervals via display. Blodsyw Rx Eopfx Aktsp Adjustable profile support arms, facilitating positioning and ensuring operator safety. Machine in perfect working condition, subject to regular annual maintenance, complete with manual.

Condition: excellent (used), Air-operated, water-cooled 3-phase direct current spot welding machine make DALEX type PMS 11-4 G3 Asload: 650 mm with special cylinder with low pressure range of 20-120 daN Bljdpfx Asu A Dg Eektjp Rated power at 50 % duty cycle 60 kVA Sec. short-circuit current: 25 kA sec. open-circuit voltage: 3.68 V with add-on switch cabinet in accordance with VDE 0100 Main switch Synchronous welding control 8036 Weight: 685 kg

Condition: used, Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Blsdpfxjz I Dgfj Aktjp Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2113/21, type of input current: three-phase, input voltage: 400 V, total height: 2,200 mm, total width: 1,500 mm, total length: 2,000 mm, nominal power (apparent): 100 kVA, electrical fuse: 250 A, working range: 40 mm, welding power (max.): 100 kVA, overall weight: 2,500 kg, A new, unused butt-welding machine. Originally acquired for butt-welding 40 mm rebar, it was never put into service because the project was cancelled. The machine is currently fitted with 40 mm round jaws, but custom jaws of any required shape can easily be manufactured for it. In addition to rebar, the machine can be used to fabricate joints for heavy machinery or anchor bolts for reinforcement work. Suitable for the butt welding of all types of steel grades up to 1,500 mm². Bodpjz Ehvlofx Aktelp

Condition: used, Year of construction: 2007, machine/vehicle number: 0185476, Offer 26283 Technical data: - Water-cooled WIG – DC welding system, mobile - Welding current continuously adjustable with digital display - min. 5 A to max. 420 A - Mains connection 400 V - Including: - SYNERGIC control with programmable welding tasks Bodpez Rwiyofx Aktjlp - 2-cycle – 4-cycle setting - HF ignition and Liftarc - Gas pre-flow control, etc. - Hose set 8m, lightweight design - Ground cable - Pressure regulator - Space requirement approx. W 700 x H 1200 x D 1200 mm - Weight approx. 200 kg