Used High Precision Lathe for sale (25,937)

Condition: excellent (used), For sale is a Schaublin 125 precision lathe in exceptionally good condition with extensive accessories. The machine was never used in production and shows barely any noticeable wear. Radial and axial runout at the spindle nose is less than 0.001mm. In terms of condition, this machine is almost as new. Naturally, the machine is fully functional and has been thoroughly checked. The brake and the feed control board were recently replaced. This is a rare opportunity to acquire one of the most precise conventional lathes in outstanding condition. TECHNICAL DATA: - Centre height: 125 mm - Centre distance: 500 mm - Maximum workpiece diameter over bed: 270 mm - Maximum workpiece diameter over cross slide: 120 mm - Infinitely variable spindle speeds: 225–3000 rpm - Spindle nose: Camlock D1-3 - Spindle bore: 32 mm - Collets: Schaublin B32 - Collet pass-through: 24 mm - Chuck pass-through: 28 mm - Bed travel: 440 mm - Carriage travel: 90 mm - Cross slide travel: 130 mm - Tailstock quill taper: Morse 2 - Tailstock quill travel: 100 mm - Automatic feeds, longitudinal & cross: 4–260 mm/min, stepless Bljdsy Hnucopfx Aprjh Weight approx. 950 kg Accessories: - Röhm 160 mm 3-jaw chuck - Reishauer 160 mm 4-jaw independent chuck - 160 mm 4-jaw self-centering chuck - 6x Multifix tool holders - Change gears for thread cutting - B32 collet set from 1 to 24 mm with draw tube - Machine mounts - Complete documentation including original brochure

Condition: used, For sale is a used Weiler Matador lathe. Version VS2 with pre-select gearbox. Comes with change gears and collet set. Good, fully functional condition. Centre height: 140 mm Bedjy Hi A Ispfx Aprslh Swing over bed: 295 mm Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 15 - 3350 rpm Inspection under power possible in 5023 Salzburg. Forklift available for loading.

Condition: used, NC High-Pressure Vice, High-Pressure Machine Vice RÖHM NC Precision Machine Vice Model RKD-125 ID No.: 180467 / D2948 Year of manufacture: approx. 2010 Jaw width (step jaws): 125 mm Jaw height (step jaws): 40 mm Jaw width (add-on jaws): 135 mm Jaw height (add-on jaws): 49 mm Machine vice body width: 126 mm Max. opening width: 141 mm per side (only with step jaws, without add-on jaws) Clamping force: 4 tons Guideway height: 105 mm Bljdpfjyy Dfdsx Aprjh - High-pressure vice with mechanical force amplifier - Clamping force adjustable in 4 steps from 1 to 4 tons - Two clamping modes: single clamping with dummy, double clamping - Various clamping ranges via 3 guide slots in each base jaw - Step jaws (reversible) - Robust machine body, ground on all sides - Can be mounted horizontally, vertically or laterally - Middle jaw dimensions (L x W x H): 125 x 40 x 40 mm - Add-on jaw dimensions (L x W x H): 135 x 20 x 49 mm Overall dimensions (L x W x H): 680 x 135 x 155 mm Weight: 56 kg Good condition

Condition: excellent (used), Year of construction: 2009, Heidenhain digital display Working area Centre height: 310 mm Centre distance: 1625 mm Max. turning diameter in the gap: 880 mm Max. turning diameter over bed: 620 mm Turning diameter in front of the longitudinal carriage: 580 mm Turning diameter over cross slide: 425 mm Bed width: 350 mm Length of the gap in front of the faceplate: 200 mm Main spindle bore: 80 mm Spindle mounting: DIN 55027/8 Optional Camlock spindle mounting: DIN 55029/8 12 spindle speeds: 30 – 1500 rpm Cross slide travel: 365 mm Top slide travel: 165 mm Drive power: 5.5 kW Bjdpjyyv N Uofx Aprslh Coolant pump motor power: 0.06 kW Weight: 1805 kg

Condition: good (used), Schaublin 102 N, machine number BL 329218, year of manufacture approx. 1998, center height 102 mm, center distance 375 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, spindle speed up to 2,800 rpm, tailstock, accessories, Blodpfxjy Hip Io Apreh

Condition: good (used), Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Bledpfx Ajy Hin Roprjh Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Threading range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: good (used), functionality: fully functional, Technical data: Centre height 110 mm Centre width 160 mm Spindle bore 23 mm Motor power 1.7 kW Speed can be set via potentiometer from approx. 100 - 2,300 rpm 3 pre-selected speeds or 3 switching levels . Scope of delivery, machine with: Operating modes: Manual + automatic Pneumatic clamping device Tilt tailstock with 2 sleeves for K 12 collets, with control switch for switching Bsdpjy Egmhofx Aprelh Hand lever cross support with 4 stops, consisting of cross and longitudinal support .

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 205-043-095, TTB TGC 64 F – 2007 | High-Precision CNC Tool Grinding Machine Fully overhauled by the manufacturer TTB Engineering SA and from a single owner. Bedpfx Aoy D Sb Ieprslh For sale: TTB TGC 64 F, year 2007, a high-precision CNC tool grinding center designed for the production and regrinding of cutting tools in carbide, HSS and other materials. The TGC series (Tool Grinding Center) is a well-established platform developed for the manufacturing of high-precision tools with micrometric accuracy. Equipped with a reliable Fanuc control system, this machine offers excellent performance, repeatability, and long-term stability. With its 5/6-axis configuration, the TGC enables the production of complex tool geometries and ensures maximum flexibility for a wide range of applications, including drills, end mills, and special tools. TTB machines are known for their exceptional thermal and mechanical stability, allowing continuous production over long periods with minimal operator intervention and consistent micron-level precision. Key features: CNC tool grinding center (5 or 6 axes) Fanuc control system Suitable for carbide, HSS, and special materials High precision and repeatability (micron range) Ideal for production and re-sharpening of cutting tools Robust Swiss-built machine with high reliability The TGC model is the predecessor of the Evolution series and remains a proven and reliable solution in tool manufacturing environments.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4104064175, KITOTEC CT-12000-D high-precision cutting tool measuring machine (2021) KITOTEC CT-12000-D is universal high-precision measuring device for all cases: Bljdpfxovi Enaj Aproh suitable for directly measuring of the special angles of drill, tap, end mill, reamer, inserts or saw, such as orthogonal rake, relief, helix, tool cutting edge angle, end cutting edge angle, pitch, core diameter, chisel edge, chisel edge angle relief, angle axial, radius centre measurement, crosshairs, simple and rotatable, chip angle and radial clearance angle. Measuring length 250 mm . Swivelling around 280 degrees with 300 mm sliding mounting plate. Dowel system can be repositioned. Measurement software Metric MT 9.02. The pixel resolution in the highest zoom level with conversion lens 0.5x is 2 microns. Included is Rollomatic Concentricity Pro with adapter plate. - Zoom system 12x with adapter 0,67x with angled optical system - attachment lense 0,5x - double guide rail system in Z and Y axis - Z axis 170 mm – pitch 1 mm with resolution, resolution 0.001 mm - X axis 100 mm – pitch 1 mm - Y axis 250 mm – pitch 5 mm (ball screw spindle) with measuring system resolution 0.001 mm - turning axis 280° with 150 mm with V-bloc, and rear stop, small V-bloc for smaller tools - LED cold light source with slot ring light and diffuser – movable - double LED spot light with goose neck arms - back light, parallel with holder movable blue for automatic measuring functions - measuring software Metric MT 9.02 - interface to read out XZ axis to software - incl. NUC-PC 4K WIN 10 GB

Condition: like new (used), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 800 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 100 kg, warranty duration: 12 months, type of input current: AC, input voltage: 230 V, compressed air connection: 6 bar, Equipment: documentation/manual, type plate available, High-Precision Reference Measuring Center – Mahr OMS 800/500 HA Multisensor Coordinate Measuring Center with Extended Z-Axis Measuring Range Factory overhauled and modernized in 2025 – ready for immediate use. Technical Data Measuring range: 800 × 800 × 500 mm Sensors: - Optical sensor: Camera & laser (active measurement) - Renishaw TP200 touch probe (other options: TP20, SP25, etc.) - Camera system with 10x objective (optional: 1x, 5x, 20x) - 3D multisensor head MSH with transmitted light, incident light, laser & probe mount Software: OptiCheck3D 2025 – user-friendly, interactive programming Evaluation station: High-performance PC with Windows 11 Professional (64bit) Accuracy: - Length measurement uncertainty: E1 = 0.9 + L/600 µm - E3 = 1.9 + L/400 µm (L in mm) - Scale resolution: 0.1 µm Dimensions / Weight: - Size: 2360 × 1940 × 3300 mm - Weight: approx. 8090 kg - Max. workpiece weight: 50 kg (glass), 100 kg (granite), extendable - Traverse speed: max. 200 mm/s Device Details Model: Mahr MarVision OMS 800/500 HA CNC Design: High-precision, air-bearing multisensor measuring center Special feature: Active vibration damping (BILZ Bi Air) Condition: From laboratory use in precision measurement room, factory-refurbished in 2024 New price of comparable equipment: from approx. €650,000 Delivery time: approx. 4 weeks from order Highlights - Leasing option: 0% interest, without bank transaction - Factory overhaul 01/2024 with warranty & guarantee - Live demo: Available online or on-site - Optional service package: Worldwide transport, commissioning, calibration/certification, training, user instruction - 18 months free: Software update service & hotline support - Software: Full license OptiCheck3D (no subscription fees) - Remote service: Online board support directly at the measuring device - Custom modifications & retrofits on request - Latest 64-bit CNC controller & evaluation station (Windows 10/11) Supply & Environment - Compressed air: 6 bar ±0.1 bar (filtered, ISO 8573-1, consumption approx. 160 Nl/min) Blodpjxbyxysfx Aprsh - Voltage: 115/230 V ±10%, 50/60 Hz ±5%, 2500 VA Environment: - Temperature: 20 °C ±1 K - Humidity: 40–70% RH - Vibrations: < 5 µm amplitude at < 5 Hz Service & Demo - Online demos available at short notice - Optional on-site demonstration at customer location

Condition: excellent (used), Year of construction: 1980, 1 x Second-operation Lathe Precision Construction PM 1-FZ Blsdpfx Apsqyfpmeroh Year of Manufacture: approx. 1980 Spindle newly mounted. Equipment: - Hand-lever compound slide rest with Multifix A quick-change system - Electric tailstock for drilling and thread cutting - Collet clamping with draw collets - Coolant system Technical Data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Center distance: 160 mm - Max. swing over bed: 220 mm Accessories: 20 x draw collets 359 E K 23 (1 - 20 mm, increasing by 1 mm) 1 x draw collet in tailstock 319 E K 12 1 x Multifix A tool post with 1 cassette Operating manual (Copy) Additional accessories, such as collets with intermediate sizes, available in stock. Machine can be inspected under power.

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Bledpfx Asw Iq Umsprsh Center height over bed: 102 mm Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Year of construction: 2012, condition: reconditioned (used), Conventional Precision Lathe WEILER “CONDOR VC” With Siemens 3-axis digital readout Year of manufacture: 2012 Spindle bore: 56 mm Centre distance: 800 mm Swing over bed: 205 mm Speed range: 30 – 3500 rpm Supplied with the following accessories: Multifix tool holder Chip guard with internal lighting Coolant system 3-jaw chuck Ø 200 mm Chuck guard Follow rest Ø approx. 150 mm Tailstock with retractable quill Bsdpfx Apsxykz Asrslh Operating manual

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Blsdpfexxm Hfex Apreh Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Production time: 26,500 With MBL Bar Feed

Condition: good (used), functionality: fully functional, Center height 110 mm Center width 160 mm Spindle bore 23 mm 3 speeds for clockwise rotation and Bledpeywtd Dofx Aprjh 3 speeds for anti-clockwise rotation

Condition: excellent (used), Control: Heidenhain TNC 124 Travel X/Y/Z: 450/260/120 mm W-axis travel: 450 mm Clamping surface (L x W): 770 x 320 mm Permissible table load: 100 kg Distance table – spindle nose (min. – max.): 0 – 110 – 560 mm Blsdoipmmujpfx Aprsh Feed rate X/Y: 1 – 2000 mm/min Quick-change tool system: SF 32 Stepless speed range: 100 – 9200 rpm Drive power: 5 kW Required space (W x D x H): 1500 x 1480 x 2330 mm

Condition: new, Year of construction: 2025, Operating Area: 3048*1524mm Machine overall dimensions: 4960×2280×2200mm Bedpfx Apeg Rgrporslh Laser Output Power: IPG 3000w/2000w/1500w X/Y-axis positioning accuracy: ±0.05mm X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 100m/min

Condition: new, Year of construction: 2025, functionality: fully functional, center height: 180 mm, turning diameter over cross slide: 212 mm, spindle bore: 52 mm, turning length: 1,000 mm, quill stroke: 152 mm, quill diameter: 52 mm, turning diameter: 360 mm, spindle nose: ASA D1-6, spindle speed (max.): 2,500 rpm, spindle speed (min.): 20 rpm, overall weight: 1,470 kg, Equipment: rotational speed infinitely variable, The SUN MASTER RML-1440V is a high-speed precision universal engine lathe designed for accurate turning, threading and general metalworking. It features a rigid cast-iron bed, hardened and ground ways, a powerful variable-speed spindle with two-range gear head (20–400 / 400–2500 RPM), and a D1-6 spindle nose. Bljdpfxjxyh Nqs Apreh The lathe includes a full quick-change gearbox, power feeds for both carriage and cross-slide, a 4-way tool post, tailstock with MT4 quill, foot brake, constant-surface-speed (CSS) function, coolant system and an integrated lubrication system. The RML-1440V provides stable performance, precise control, and versatility for both production and workshop applications. The lathe is locate in our warehouse and ready for shipment and any time.

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: >> Machine No. 283152 >> Centre height: 102 mm >> Centre distance: 450 mm Bljdpfx Aswvq Tmsprjh >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.

Condition: new, Year of construction: 2025, Operating Area: 3048*1524mm Machine overall dimensions: 4960×2280×2200mm Bsdpsg Db Taofx Aprolh Laser Output Power: IPG 3000w/2000w/1500w X/Y-axis positioning accuracy: ±0.05mm X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 100m/min

Condition: excellent (used), Year of construction: 1990, High precision drilling and milling machine Aciera 22 VA Good condition from school use Year of manufacture approx. 1990 Bljdpfxehqm D Ns Aprjh table 600 x 320 mm speed 40 - 3600 rpm speed adjustment rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 spindle diameter 65 mm drilling spindle stroke 120 mm spindle adaptor: Aciera quick change system Automatic thread cutting system Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1,1 KW Lamp Some quick change adapters Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical data under reserve

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz Bjdpfx Aow Dvv Asprjlh - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: refurbished (used), Year of construction: 2025, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 250 mm, JUNG JF520 / JF525 SPM-X rebuilt mechanicaly, geometricaly und elektricaly rebuilt according JUNG acceptance protocoll for new machines Bedpfx Ajbwl Uhsprjlh - retrofit with new 12“-SIEMENS-Touch-OP control - new electrical cabinet with magnetic control for chuck - plain text error codes - electro mechanical vertikal feed - dresser compensation - automatic lubrication unit - all numeric values (verical feed) und on/off functions e.g. hydraulic and und coolant unit over touch panel - all analog functions e.g. rpm, magnetic force and feed of Z-axis fpr direct access of the worker over switches on the control panel - 12 month warranty max. grinding range: 600 x 250 mm delivery time approx. 12 weeks

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3806, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 250 mm, grinding spindle speed: 3,000 rpm, power: 3.5 kW (4.76 HP), Equipment: rotational speed infinitely variable, JUNG JF520 SPM – workshop overhauled Mechanically / geometrically and electrically completely overhauled in 2007 Mechanically and geometrically partially overhauled in 2025 and fully functional Wear parts replaced Geometry overhauled according to JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor feed - 3-axis RSF digital readout - Dressing dimension compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck Bodpfx Aewz Hf Nsprslh - Used paper band filter 6 weeks parts warranty Delivery time: short notice We are happy to take your used JUNG grinding machine in part exchange.

Condition: new, Year of construction: 2025, Operating Area: 1000*1500mm Machine overall dimensions: 3630×2200×1940mm Laser Output Power: IPG 3000w/2000w/1500w X/Y-axis positioning accuracy: ±0.05mm X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 60m/min 1. A Compact Design with Complete Protection Blodpfx Apeg Rgvhjrsh Small occupied space balances complete protection and higher safety. 2.No Quiver when Cutting Thin Sheet i Series are capable of cutting edges of thin sheet and ensure no quivering marks.