Used High Speed Press for sale (53,990)

Condition: used, machine/vehicle number: 1203-5, Table size: approximately 1200 x 600 mm, with a machine vise. Csdpfo Af Nktex Acgehd

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Spindle speed (min): 335/min Spindle speed (max): 1800/min Anzahl der Gänge: 2 Chodsikvcaspfx Acged Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Drive 6kw

Condition: good (used), functionality: fully functional, Internal article number: 26092 Original Deckel high-speed milling head SK40 Cjdpfx Acoz Ha Euogohd Compatible with Deckel FP1 / FP2 Well-maintained original condition! This high-speed milling head comes from an educational institution and is in good condition.

Condition: good (used), BSTA 30 / 600 spm Bruderer Feed BBV 120/60 Press force max. 300 KN Power consumption from 1.5 to max. 5.5 KW Technical Air 6-10 bar Operator’s instruction Bed opening 250 mm +/-20mm Stroke: 8-40 mm Strokes per minute.: Max. 600 spm variable from 100-600 spm With Automatic central lubrication Main shaft cooler Pneumatic clutch and pneumatic brake Three working mode Programmable speed and number of strokes, Reverse flywheel mode Feeding of strip from left to right or right to left Strip pushing or pulling Roll feed BRUDERER BBV Strip width ca. max. 190 mm Feeding pitch ca. max. 60 mm Strip max. thickness 3,5 mm Distance between columns 325 mm Table height from floor 1000 mm Table surface area 540 x 300 Hole in the table 315 x 110 mm Ram surface dia. 250 mm Weight ca. 3.000 kg Chsdoda Ha Nspfx Acgjd Dimension ca. 1100 x 1.400 x 2.200 mm Feed pitch up to max. 60 mm adjustable, highly accurate(tol. 0.02 mm) Emergency stop and all other CE safety guards and relays Indexing per minute, infinitely variable Automatic in feed, fully synchronized with punching moment More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: used, Donau DR52 Drilling capacity in steel (diameter) 52 mm Arm length 1140 mm Workpiece height max. 830 mm Drilling capacity in cast iron 60 mm Taper MK 5 Table size 1100 x 620 mm Drilling spindle stroke 225 mm Chsdpfx Ajz D U Tzocgod Spindle speed range 28 - 1400 rpm Feed rate 0.1 - 0.5 mm/rev Total power consumption 10.0 kW Machine weight approx. 3.5 t Machine dimensions approx. 2.4 x 1.3 x 2.61 m

Condition: good (used), Year of construction: 1980, machine/vehicle number: 2226-3, Offer 26331 Technical data: - Drilling capacity in full steel ST 60: 23 mm - Drilling capacity in GG 25: 30 mm - Thread cutting in ST 60: M 20 - Thread cutting in GG 25: M 26 - Drill spindle connection: MK 3 - Quill stroke: 135 mm - 12 drill spindle speeds: 70 - 1550 rpm - Drilling feed: 0.075 - 0.30 mm - Min./max. distance spindle – table: 220 / 670 mm - Drilling radius min./max.: 305 / 920 mm - Table size: 1060 x 600 mm - Drive: 400 V / 1.1 - 1.6 kW Cods Agtagjpfx Acgohd - Space requirement approx.: W 1200 x H 2500 x D 2300 mm - Weight approx.: 1380 kg - Includes: - Thread cutting device - Hydraulic column and boom clamping - T-slot clamping plate, vertical, on the left side of the machine

Condition: good (used), Year of construction: 1983, Stock number: 3005 Manufacturer: HKS Singen Year of manufacture: 1983 Machine number: 401044 Model: HKS 40 Drilling capacity: 40 mm Csdpfx Aowu Ilwjcgohd Spindle taper: MK 4 Speed range: 26 to 1,940 rpm Feed: 0.05 to 0.45 mm/rev Table: 1,520 x 740 mm Clamping surface: 1,370 x 610 mm Outreach min/max: 400 / 1,120 mm Stroke: 200 mm Swiveling range: 360° Vertical adjustment of arm: mm Horizontal adjustment of arm: 720 mm Accessories: Connection: 6.5 kW Footprint: 1,500 x 1,100 mm 2nd plate: 1,500 x 1,000 mm Dimensions: 1,800 x 1,600 x 2,700 mm Weight: 2.3 t

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,800 kg, Spindle: MK4 Clamping area: 1200 x 500 Clamping slots: Number 3, width 18, spacing 125 Maximum drilling capacity: for St 60 steel: 32 mm at 0.2 mm/rev Chjdpfx Acozuarmegsd for GG 20 cast iron: 45 mm at 0.2 mm/rev

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, table length: 4,500 mm, table width: 2,500 mm, spindle speed (max.): 22,000 rpm, CNC Heidenhain iTNC 640 WORKING AREA: Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE: Dimensions: mm 4.500 x 2.500 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE: Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. C-axis rotation range: ± 270° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Codpfxoyv In Ij Acgjhd Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Constant power range: rpm 3.000 to 18.000 Constant torque range: rpm 10 to 3.000 Tool interface: HSK-A63 DIN 69893 ELECTROSPINDLE HSK-A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM Spindle power (S1/S6): kW 37/43 Spindle torque (S1/S6): Nm 140/165 Maximum spindle speed: rpm 15.000 Constant power range: rpm 2.500 to 12.000 Constant torque range: rpm 10 to 2.500 Tool interface: HSK-A100 DIN 69893 CHAIN TOOL MAGAZINE – 55 POSITIONS, HSK-A100 / HSK-A63 Floor-mounted fixed chain magazine located at the rear of the machine, fully enclosed for operator protection, equipped with a vertical tool change arm and automatic tool pre-selection. Fixed-pocket management system. Hydraulic axis locking Total tools: No. 55 HSK-A63 tools (DIN 69893): Number of tools: No. 30 Max tool diameter: mm 90 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 300 Max tool weight: kg 10 HSK-A100 tools (DIN 69893): Number of tools: No. 25 Max tool diameter: mm 100 Max tool diameter (with adjacent pockets free): mm 160 Max tool length: mm 450 Max tool weight: kg 20 REQUIRED CONNECTIONS Maximum installed power: kVA 177 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • High-pressure water and air through the spindle • Semi-automatic electrospindle change system with HSK-A63 and HSK-A100 interfaces • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Condition: used, SAACKE VENTA MHI 25-56 A Industrial Radial Fan / High-Pressure Blower / Exhaust Fan, Used Equipment Main Data and Specifications: Manufacturer: SAACKE GmbH & Co. KG, Bremen / VENTA GmbH, Schwäbisch Hall Type: MHI 25-56 A Order No. (Auftrags-Nr.): VN1HU-011398-000 Serial No. (A.Nr.): 26079/1 Model No. (M.Nr.): 33526 Airflow rate (Vn / V): 3950–4242 m³/h Pressure (ΔpS / ΔpT): 34.0 mbar / 37.5 mbar Rotational speed: 2930 rpm Motor Specifications (SCHORCH Three-Phase Motor): Power: 7.5 kW Voltage: 380/660 V (Δ/Y), 50 Hz / 440 V, 60 Hz Current: 15.5 / 8.9 A Rotational speed: 2920 rpm Mounting arrangement: IM B3 Protection rating: IP54 Overall Dimensions: Width: 680 mm Chjdpo Ahqlvofx Acgjd Depth: 870 mm Height: 990 mm Weight: 210 kg Inlet and Outlet Dimensions: Inlet opening: Ø 260 mm Outlet opening: 280 × 180 mm

Condition: used, total height: 2,500 mm, total length: 7,500 mm, total width: 3,700 mm, Year of manufacture: 2005 Colour: Grey Empty weight: 9.600 kg Price: On request - Year: 2005 - Documentation available: Yes - CE marking present: Yes - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Power [kW]: 24.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 2000 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 550 - C-axis rotation [°]: 360 - Table length [mm]: 2600 - Table width [mm]: 550 - Tool holder: ISO40 - Main spindle power [kW]: 22 - Min. spindle speed [rpm]: 20 Cedpfxozkudcs Acgohd - Max. spindle speed [rpm]: 12000 - Positioning accuracy [mm]: 0.01 - Travel speed [mm/s]: 667 - Options: Tool magazine, Chip conveyor, External cooling - Transport dimensions: 7500mm x 3700mm x 2500mm (l x w x h) - Transport weight [kg]: 9600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. Chjdpfx Ajzn N Ecscged • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Condition: used, Year of construction: 2008, operating hours: 5,778 h, functionality: fully functional, total width: 1,980 mm, total length: 3,750 mm, total height: 2,050 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 2,600 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, water tank capacity: 400 l, volume flow: 1.2 m³/h, empty load weight: 1,940 kg, temperature: 40 °C, fuel tank capacity: 220 l, type of cooling: water, noise level: 103 dB, power: 129 kW (175.39 HP), year of last overhaul: 2026, water pressure: 2,500 bar, cubic capacity: 4,760 cm³, pump capacity: 20 l/min, Equipment: type plate available, Falch trail jet 100 2500-20-0-d with a maximum of 2500 bar and 20 l/min. The pump is driven by a water-cooled 4-cylinder DEUTZ diesel engine. General specifications: ----- Operating pressure: 2500 bar Flow rate: 20 l/min Maximum pump speed: 590 rpm Drive engine: 4-cylinder DEUTZ diesel Drive engine power: 129 kW Codo Agb Dzopfx Acgjhd Drive engine speed: 1800 rpm Fuel tank: 220 L Maximum fuel consumption: 12.5 L/h Safety system: ----- Low water level safety valve Burst discs Steel safety frame Impact-resistant water tank Impact- and rust-resistant fuel tank Electronic Falch Easy display system Engine temperature Alarm for open lid Oil pressure Engine overheating Advantages: ----- Shorter setup times Steel safety frame for reduced downtime Water filter for consistent water quality High-quality components reduce maintenance costs Water-cooled diesel engine Long service life Maintenance every 500 hours Low fuel consumption Theft protection Dimensions and unladen weight: 3750mm x 1980mm x 2050 mm (1940 kg) Includes standard accessories (20m HD hose, control cable, gun with lance and jet nozzle) and rotor nozzle. Condition: HD pump has a new seal kit, new battery and water filter. Similar to, but not a Denjet, Dynajet, Hammelmann, Kamat, Uraca, Woma, etc.

Condition: good (used), Includes tool cabinet and drill bits! 2. Table Work area: 600mm x 1200mm Tool holder: MK 4 Chjdpfx Ajz Db Eqecgsd Drilling capacity: 40mm in steel Tapping attachment Coolant system

Condition: used, Year of construction: 2003, operating hours: 4,267 h, Jungheinrich ESE 20 high-speed electric pallet jack truck RA2397 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90074846 Battery change: 2016 TÜV: until 2023 Csdswcqg Hjpfx Acgohd Operating hours: 4267 h Fork length: 1930 mm Fork width outside: 540 mm Maximum load capacity: 2000 kg Lifting: 125 mm Travel speed 8.5-12.5 km/h Including: Instrument cluster and information and service display Quick charger 380V Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 6234-3, drilling capacity: 40 mm, total length: 3,490 mm, quill stroke: 200 mm, total height: 2,950 mm, total width: 1,800 mm, table length: 1,800 mm, spindle speed (max.): 2,800 rpm, table width: 600 mm, type of input current: AC, overall weight: 2,900 kg, column diameter: 195 mm, input voltage: 400 V, input frequency: 50 Hz, distance table to spindle center: 705 mm, spindle motor power: 5 W, table height: 900 mm, distance table center to spindle nose: 95 mm, input current: 25 A, • Work table 1800 x 600 mm with 4T slots • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Stepless speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm on the machine base at the rear • 2 T-slots 18 mm on the machine base on the left • Thread cutting device • Central lubrication • Coolant system • CE marking Cjdpfxjz R Rv Rj Acgohd • Includes attachments as shown in the photo

Condition: used, Year of construction: 2014, Vertical high-speed machining center Manufacturer: DMG Mori Type: MILL TAP 700 Year of manufacture: 2014 Control system: Siemens 840D SL Travel ranges X/Y/Z: 700 x 420 x 380 mm Spindle speed max.: 24,000 rpm Tool magazine: 15 positions Weight approx.: 4,100 kg Automation with robot Manufacturer: Sontec Type: Sonflex Year of manufacture: 2023 Robot: Fanuc Chsdpfx Asz I Inmecgjd 31126

Condition: used, functionality: fully functional, USED MILLING MACHINE WITH HIGH-SPEED HEAD FIRST ISO30. WITH HOOK/PNEUMATIC RELEASE SCREWDRIVER AND AUTOMATIC GUIDE LUBRICATION SYSTEM. Cedpezht Nljfx Acgshd

Condition: good (used), Year of construction: 2014, Offer 26252 Technical data: - Drilling capacity in full steel ST 60: 22 mm - Drilling capacity GG 25: 32 mm - Thread cutting ST 60: M 20 - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 Csdpfszwftzjx Acgehd - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max: 420 / 1320 mm - Swivel angle: 320° - Table size: 1200 x 600 mm - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm - Hydraulic column and arm clamping - T-slots, vertical, on the left side of the machine - Coolant system - Drive: 400 V / 1.1 / 1.6 kW - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm Chodpfx Acjvphiyogod * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: ready for operation (used), High-speed radial drilling machine, MK 2 Speed infinitely adjustable Csdez D D I Iepfx Acgehd Drilling head electrically adjustable

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Chedpfewnn S Rex Acgjd Thread cutting device Coolant device Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty New paint RAL 7035/7031

Condition: used, functionality: fully functional, USED VERTICAL MILLING MACHINE LAGUN ISO 40 WITH UNIVERSAL HEAD. ALSO COMES WITH THE UNIVERSAL HEAD ACCESSORY 'HURON TYPE.' Table dimensions 1370x280 mm T-slots No. 3 X-axis travel 850 mm Y-axis travel 350 mm Z-axis travel 400 mm Saddle travel 570 mm Spindle taper ISO 40 Quill travel 127 mm Quill diameter 86 mm Spindle speed 60-4200 RPM Head tilt left-right 90 degrees Head tilt forward-back 45 degrees Chsdpfszht N Sox Acgsd Main motor 4 Hp Maximum table load 250 Kg Approximate net weight 1650 Kg

Condition: excellent (used), Year of construction: 2011, operating hours: 5,303 h, functionality: fully functional, machine/vehicle number: 5847, travel distance X-axis: 600 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 42,000 rpm, spindle speed (min.): 5 rpm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 550 mm, table length: 450 mm, type of input current: three-phase, table load: 350 kg, overall weight: 5,500 kg, workpiece weight (max.): 350 kg, input frequency: 50 Hz, controller manufacturer: Heidenhain, controller model: TNCi530i, operating hours of spindle: 5,303 h, Equipment: documentation/manual, rotational speed infinitely variable, High-Speed Milling Machine HSC500/3 HSC500 - 3 Axis Annual maintenance Spindle operating hours HVC140: 5303h Travel range X/Y/Z: 700/590x580x360 mm Actual machining area: 580x530 mm Table area: 550x450 mm Workpiece weight: 350 kg Distance table to spindle nose: 160/520 mm Machine dimensions (W x D x H): 3200x2250x3000 mm Rapid traverse: 30 m/min Equipment: Heidenhain iTNC530i control Prepared for dust extraction Tool changer with 60 stations, HSK40 (Minimum quantity lubrication) Adjustable air nozzle Tool length measurement with Blum laser Workpiece measurement with Renishaw OMP-400 touch probe Additional lighting Electronic handwheel with enabling switch Milling spindle: Steptec HVC140-15/42 42,000 rpm, 5303 operating hours MMS Lubtools Cjdpjy R U Azofx Acgohd 3 kW cooling system Loading door at rear of machine Length compensation, temperature compensation for accuracy package Warranty: 3 months (milling spindle excluded) Transport, commissioning, training Options on request

Year of construction: 2022, condition: new, Attachment suited for: Construction machines The high speed manipulator on the pictures is manufactured for casting factory. They put the the materials into the grinding process. We can manufacture boom-arm in hydraulic or electrical systems with breaker, bucket, grapple etc.. Chodsn Tm Sxjpfx Acgsd For detailed information please contact us