Used Hinge Drill for sale (5,946)

Condition: used, Year of construction: 1988, taper MK 1 weight of the machine ca. 140 KG Dsdpfxoztfwfj Aptocl

Condition: used, Radial Drilling Machine GSP type 44 T 12 Spindle: CM4 Djdpezw Axnofx Aptjcl Spindle exit: 300 mm Arm travel: 1000 mm Max height swivel table/spindle nose in height position: 700 mm Max height table/spindle nos ein height position: 1300 mm Swivel table +/- 90 Swivel table dimensions: 1000 x 400 mm Spindle motor: 3,7 kW False table Length 1000 mm x Width 800 mm Auto descent Mechanical locking Lubricant pump Spindle rotation left/right Rotation at 360° around the column Voltage: 380 V Length: 2100 mm Width: 1000 mm Total height in height position: 2700 mm Total height in low position: 2400 mm Weight: approx 2,5 T

Condition: good (used), Year of construction: 2014, Offer 26252 Technical data: Dcjdpfx Apozwftzetsl - Drilling capacity in full steel ST 60: 22 mm - Drilling capacity GG 25: 32 mm - Thread cutting ST 60: M 20 - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max: 420 / 1320 mm - Swivel angle: 320° - Table size: 1200 x 600 mm - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm - Hydraulic column and arm clamping - T-slots, vertical, on the left side of the machine - Coolant system - Drive: 400 V / 1.1 / 1.6 kW - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 5-axis machining center with traversing table, model MFS, equipped with an 840D Siemens control system. Travel ranges: 13200 x 3000 x 1200 Spindle: SK50, motor with a rated power of 15 kW. Maximum spindle speed: 2500 rpm. Dedoy Rgt Eopfx Aptecl

Condition: good (used), Year of construction: 1984, machine/vehicle number: 20032, Offer 21276 Technical data: - Drilling capacity in steel ST 60 30 mm Djdpfx Apjzm Tw Hetscl - Drill spindle mount MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Right-hand and left-hand rotation - Drill spindle stroke 160 mm - Overhang 350 mm - Table with 3 T-slots, height-adjustable 340 x 320 mm - Table can be tilted to the left and right - Max. distance table – drill spindle 500 mm - Max. distance machined base plate – drill spindle 1050 mm - Column diameter 160 mm - Lighting - Coolant system - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Condition: excellent (used), Year of construction: 1974, travel distance X-axis: 4,600 mm, travel distance Y-axis: 3,000 mm, feed length W-axis: 2,000 mm, spindle diameter: 160 mm, table load: 25,000 kg, CNC boring and milling machine – Scharmann Manufacturer: Scharmann Model: WFT 160 (early 1970s) Control system: Bosch CC300 Work table: 2000 x 2500 mm Longitudinal travel of the table: 4600 mm Transverse travel of the table: 2000 mm Vertical travel of the spindle: 3000 mm Dcsdpfx Apezvw Ihetsl Maximum table load: 25 tons

Condition: used, Year of construction: 1986, taper MK 1 weight of the machine ca. 69 kg Dcsdpfxsztfymo Aptol

Condition: used, Year of construction: 1977, serial number 2934 Dcjdpfx Apjztfytstsl weight 709 kg feed ja m/min taper MK 3

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). Dodpfxozytmzj Aptocl The installation has been serviced annually.

Year of construction: 1987, condition: used, X-axis: 500mm, y-axis: 430mm, z-axis: 400mm, table dimensions: 510x450x410mm, max. table load: 250kg, angular clamping table: 800x390mm, feed rate x-/y-axis: 4-1600mm/min, z-axis: 4-1000mm/min, feed force: 5000N on all axes, rapid traverse x-/y-axis: 1.6m/min, z-axis: 1m/min, tool holder (DIN 2079): ISO 40, cutter drawbar thread: M16, hydromechanical tool clamping: 12,000Nm, quill stroke: 80mm, drive power: 3kW, 18-speed sliding-gear transmission: manually or automatically selectable, torque: 5Nm, spindle speed: 50-2500rpm, connected load: 6kW, control: Heidenhain TNC 114B (hand control type HS262), display resolution: 0.005mm, length: 1400mm, width: 1300mm, height: 1830mm, weight: 1.6t, space requirement: 2300x2300x2400mm, equipment: machine light, coolant tank: 18l, external coolant supply: 3bar, various tool holders, spindle tool. On-site inspection is possible. Dcedpfx Apezwfq Totjl

Condition: used, Speed / U/min. Dcodpfx Aeithz Usptol Arm length / mm Motor output / kW

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. Dsdpoq Ii Dlofx Aptecl - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, bore capacity in steel (diameter) / mm throat / mm Dcsdpfxsxqrhfe Aptjl bore stroke / mm total power requirement / kW

Condition: good (used), electric motor, drive motor, engine Dcjdpjw S Tg Tofx Aptel -Manufacturer: Einhell, electric motor from column drill TB 13/5 EK -Power: 0.25 kW / 1420 rpm -Shaft: Ø 14 x 30 mm -Number: 6x motor available -Price: per piece -Dimensions: 185/123/165 mm -Weight: 4.6 kg/piece

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Length:3700mm Width:1800mm Height:4300mm Weight:14000kg Dcedpfx Apezi S Snotjl Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, drilling depth: 600 mm, workpiece weight (max.): 2,000 kg, travel distance X-axis: 750 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 3,000 rpm, drill diameter: 35 mm, drill spindle length: 600 mm, spindle mount: MK 2, spindle stroke: 600 mm, number of spindles: 1, Equipment: rotational speed infinitely variable, Driling capacity: Ø 35 mm Dedpozu Sp Rofx Aptecl Driling depth: 600 mm X-axis: 750 mm Y-axis: 630 mm Z-axis: 300 mm Spindle speeds: 0 - 3000 rpm Tabel size: 1100 x 650 mm Load on table: 2000 kg max Turning table: 360° Controller: Degen AE30 Including: - Cabinet + pallet with drills - Coolingunit - Machine manuals Country of origin: Germany Motor power: 11,2 kVA Machine LxWxH: 350 x 120 x 175 cm Machine weight: 1300 kg

Condition: ready for operation (used), functionality: fully functional, gearing type: mechanical, fuel type: diesel, color: white, overall weight: 58,000 kg, empty load weight: 44,000 kg, first registration: 01/2001, mast type: telescopic, suspension: steel, Year of construction: 2001, operating hours: 15,000 h, machine/vehicle number: 03/2001, Equipment: cabin, onboard computer, steel tracks, trailer coupling, The LLAMADA P130TT drilling rig is designed for executing bored piles (CFA) or displacement piles with a maximum depth of 23 m and diameters ranging from Ø 350 mm to Ø 1000 mm. It is an ideal machine for working in confined spaces due to its lightweight design, compact dimensions, high stability, high efficiency, and quick assembly. Parameters: Drilling depth up to 23 meters Maximum CFA pile diameter: 1000 mm Maximum CMC pile diameter: 520 mm Head torque: 18 tm at a rotation speed of 9 rpm Maximum rotation: 18 rpm at a torque of 9 tm Downforce: 12 t Auxiliary winch: 3.2 tons lifting capacity Concrete pumping hose diameter: 125 mm Machine transport weight: 50 t Maximum mast tilt in the xx, yy axes: 3 degrees Maximum length of drill rods that can be installed: 24 meters Deutz BF-10L-513 engine power: 263 kW at 2300 rpm Track width: 700 mm Dcjdozu S Rzjpfx Aptel Track ground pressure: 0.8 kg/cm2 This offer concerns the purchase of three identical machines simultaneously, with a total price of €249,999 for the complete set. The first machine is fully functional and ready for operation, while the other two require refurbishment/commissioning.

Condition: used, SIPA horizontal drilling machine Dcjdpfx Apezvm Iqstel

Condition: ready for operation (used), functionality: fully functional, power: 2.2 kW (2.99 HP), For sale is a robust and reliable Alzmetall AB 35 S pillar drilling machine, previously used in an industrial setting. The machine is characterized by its stable construction and high reliability, making it ideally suited for workshops, maintenance, toolmaking, and mechanical engineering. Technical data: Manufacturer: Alzmetall Type: AB 35 S Pillar drilling machine Motor power: 2.2 kW Voltage: 220/380 V Multi-stage speed adjustment Drilling table, height-adjustable Foot switch / Emergency stop Condition: Used Dismantled or removed from ongoing operation Good condition, considering its age Sold as is Scope of delivery: Machine complete as shown in the picture Foot switch Accessories according to photos Inspection Inspection possible by appointment. Important terms and conditions: Please note that the sale of this machine is only possible under the following conditions: Dcedpfx Apjzwnrtotjl • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: used, Drills Grinding Machine DECKEL SOE Spindle speed: 4500 RPM Djdpfx Aszww Tteptjcl Maxi bore of clamps: 17,5 mm Maxi sharpenable radius: 10 mm Maxi lateral displacement: 10 mm Angle adjustment: 45° Maxi displacement: 100 mm (see technical details) Delivred with 1 set of clamps + different diamond grinding wheels Voltage: 380 V Width: 600 mm Depth: 600 mm Total height: 1300 mm Weight: approx 150 kg

Condition: used, Year of construction: 2018, functionality: fully functional, - Year of manufacture: 2018 - Fully operational - Made in Poland - Operating manual, CE certificate included TECHNICAL SPECIFICATIONS: - Four drilling units - Suitable for drilling both long and short components - First drilling unit: five drills - Second drilling unit: five drills - Third drilling unit: five drills - Fourth drilling unit: six drills - Adjustable drilling units, right and left - Three horizontal pneumatic clamps - Three vertical pneumatic clamps - One centering pneumatic clamp - Motor rotation (right): 3000 rpm - Motor power: 5 kW - Spindle stroke: approx. 160 mm - Table height – working level: approx. 1000–1080 mm - Rated voltage: 3x400 V - Air pressure: 6 bar Dcedpfx Apow Iqdzjtsl - Air consumption: 10 Nm3/h / 2m3/h Dimensions: - Length: 2300 mm - Width: 1700 mm - Height: 1500 mm - Weight: 750 kg

Condition: new, Year of construction: 2026, The ZX 7045E 230V milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Dcjdpfx Ajwnb T Ioptsl Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 230V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2

Condition: used, Empty weight: 4.200 kg Djdswnifrepfx Aptjcl - Documentation available: Yes - CE certificate present: No - Control: Conventional - Motor power: 2.0kW - Transport weight [kg]: 4200kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1975, drilling capacity steel/cast iron 23,30 mm throat 300 mm bore stroke 140 mm spindle taper MT MK 3 spindle turning speed range 208- 2000 U/min table travel 400 mm weight of the machine ca. 275 kg table-size 415 x 300 mm distance work spindle /surface of the table 450 mm voltage 400 V connected load 0,9/1,4 kW Dcodpfx Asymp Snsptol

Condition: used, Year of construction: 2002, functionality: fully functional, spindle mount: MK 3, throat depth: 297 mm, overall weight: 680 kg, L.-No. 4.1-551 1 used Pillar Drilling Machine, Manufacturer: ALZMETALL, Model: AC 25, Year: 2002 Height-adjustable drilling head, fixed table, coolant device. Technical details: Drilling capacity steel/cast iron: 25/30 mm Spindle taper: MK 3 Feed: 35-1400 rpm Dcjdpey Hik Sofx Aptel Spindle stroke: 120 mm Spindle-column overhang: 297 mm Tool fitting: MK3 Machine weight: 680 kg Technical data, accessories and description of the machine are not binding.