Used Homag Baz 324 for sale (471)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, OPTIMAT BHX055 Lsdpjyvh Dpefx Akfsrk

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece length (max.): 2,500 mm, TECHNICAL DETAILS Panel length min.: 300 mm Panel length max.: 2,500 mm Panel return system for edge banding machine: Left Panel ejection: via air nozzle table The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Lsdpfx Akoyxnapefork External reference: 7877

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation Lrjdsyw Ndmopfx Akfek - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 7,845 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, HOMAG Ambition 2260 Lodpfx Ajyu S Iuekfjrk

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor Lrsdpfx Akob A Nx Defsk -Power: 0.23 kW -Speed: 18000 rpm at 300 Hz -Dimensions: 210/70/H100 mm -Weight: 2 kg

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing Lsdpfx Akeywxrajferk 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE EDGEBANDING (BATCH ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM Mod. PROFI TBR100/20/30/F M.02) SINGLE-SIDE EDGE BANDER (RIGHT-HAND machine)"HOMAG" Mod. Profi KAR350/12/A Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Numerical Control / Software PC 22 Adjustable feeding speed (m/min ) 18 - 32 Panels in-feed system WZ 14/30 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 3) DOUBLE Glueing Unit (P.U.R. Glue + Quick Melt unit) 2 x PU 34 Lrjdpfeinigmex Akfsk Pressure zone (N.C. adjustment) - Edge coils supporting unit (No. 12 reels) Snipping (end-cutting) unit WK13 Rough Trimming unit (2 x Kw 055) Fine Trimming unit (Multi-profile, adjustable by N.C.) MF 21 (2 x Kw 0,55) Corner Rounding unit (Contour Trimming) FF 32 (4 x Kw 0,4) Multi-Profile Copying unit adjustable by N.C.(fine and contour trimming) FK 31 (30 m/min) recently added (in a technological "revamping" operation) Profile Scraping unit (Multi-profile, adjustable by N.C.) MN 21 (servo) Finish processing unit (Glue scraper + Buffing unit) FA 11 Jumping Milling grooving unit UF 11 (1 x Kw 4) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "BARGSTEDT" Model. TFU200/L/30/12/S

Condition: good (used), Year of construction: 2003, machine/vehicle number: 0-201-22-4227, functionality: limited functionality, workpiece length (max.): 4,800 mm, workpiece height (max.): 80 mm, number of slots in tool magazine: 18, spindle motor power: 7,500 W, number of spindles: 2, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, spindle speed (max.): 18,000 rpm, spindle speed (min.): 18,000 rpm, Equipment: rotational speed infinitely variable, Main spindle equipped with C axis and extension for Flex 5 aggregate. Working area X: 4800 mm. Working area Y: 1300 mm. Working area Z: 80 mm. 8 consoles. 1 vacuum pump. 18-position travelling tool changer. Tool holder HSK 63. Adapter - horizontal boring head with 4 fixed spindles. Boring head with 17 spindles. Additional spindle with collet chuck. Measuring probe. Central automatic oil lubrication. Lifting rails for console table. Lrsdsxdxa Ispfx Akfek

Condition: used, Year of construction: 2002, Double-sided softforming edge banding machine HOMAG type Power KF 20/34/QE/30, machine no. 0-202-25-8815, year 2002 Ljdpfx Aoyyxc Rokferk

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) Lrsdpfx Aeyv Ev Aokfek No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Ledpfx Aex D Dq Sekferk Application Types Complete Production

Year of construction: 2011, condition: ready for operation (used), Main Drive Number of axis 3 This 3-axis HOMAG WEEKE OPTIMAT BHX 500 was manufactured in 2011. It features a robust CNC processing center with a working area of 2500 mm by 1300 mm, main electrospindle power of 6 KW, and a maximum panel thickness of 80 mm. It includes 84 drilling spindles and dual milling spindles, each offering 6 KW at 18000 rpm. If you are looking to get high-quality CNC capabilities, consider the HOMAG WEEKE OPTIMAT BHX 500 machine we have for sale. Contact us for more information. Application Types Lodpfjx D Nvgex Akfsrk CNC Wood Machining

Condition: excellent (used), functionality: fully functional, Equipment: CE marking, documentation/manual, double-sided, Additional equipment: Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR OTT 2kg Melting Station / Machine Benefits Technical Machine Benefits Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Lrjdjxwui Espfx Akfek Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Minimum workpiece gap: 500 mm

Year of construction: 2019, condition: like new (used), functionality: fully functional, Box On Demand, Endless Corrugated Board, pay attention to your CO2 footprint, The machine listed here for processing endless corrugated board belongs to the series of static machines, i.e., operations across the machine are carried out while the carton is stationary. The machine is designed for high productivity. The maximum working width of the carton is 1,500 mm. All tool settings are made automatically. 1) Main Machine Body (Carton Cutting Automaton): Linear cross-cutting and cross-creasing unit for head-to-foot processing on the carton. 8 longitudinal creasing/cutting units from above for longitudinal creases and cuts in the carton 2) Double Carton Magazines 2 carton magazines provide for the supply and feeding of raw carton material to the processing machine. Lodpfxjyy Iqke Akfork Stack height for endless corrugated board up to max. 2,000 mm possible 3) Control Cabinet, Control System, Electronics: Contains all components required for operation and control of the system. Control cabinet components are based on HOMAG standard.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 0-261-20-6827, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Type KDF 220 Profiline Year of manufacture: 2012 Units controlled from display Jointing unit: 2 x 2.2 kW Lrjdsyy S Adspfx Akfsk Gluing unit A6 End trimming saw unit: 2 x 0.18 kW Flush milling unit: 2 x 0.27 kW Profile milling unit: 2 x 0.35 kW WD 40 Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Workpiece thickness: 8-60 mm Feed speed: 11 m/min Total power: 16 kW Length: 4150 mm

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, power: 19 kW (25.83 HP), travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,730 mm, number of spindles: 20, number of tool stations in tool turret 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Tool magazine positions: 18 Lrsdpfjyttf Sjx Akfok Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling (X-direction): 2 Number of spindles for horizontal drilling (Y-direction): 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied based on availability (left side only). The machine is sold and delivered in its actual and legal condition (‘as seen and approved’), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods prior to collection, and assumes responsibility for installation, safety, and use of the machine at the destination. External reference: 6906

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,550 mm, workpiece height (max.): 40 mm, number of spindles: 30, travel speed (max.): 80,000 mm/min, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Lrsdjyttcwepfx Akfek Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for installation, securing, and usage of the machine at the destination. External reference: 7350

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Lrsdpfx Aeytr Hbjkfek Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 6216

Year of construction: 2015, condition: ready for operation (used), This 4-axis HOMAG PROFI BMG 511/60/12/R was manufactured in 2015. A robust CNC processing center featuring an 18-position tool changer, a drilling head with 30 spindles, and a dynamic table area allocation. It boasts a main milling spindle with a power of 12 kW and a speed range up to 24,000 rpm. Ideal for complex woodworking tasks with its extensive working area of 6,000 x 1,550 mm. Contact us for more information about this machine. Ljdpex D Ra Hjfx Akfsrk Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2010, This HOMAG KAL 310/7/A3 was manufactured in 2010. A used single-sided edge banding machine featuring a 28-position ISAS edge magazine, PU gluing unit, and Boomerang return system. It includes a joint milling unit with two motors and a PU 34 gluing system with a capacity up to 6 kg/h. Ideal for precise edge banding applications. Contact us for more information about this machine. Application Types Edge Banding Lredpfx Asx D Ra Tekfsk

Condition: ready for operation (used), Year of construction: 2006, Edgebander manufactured in 2006. This HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, accommodating workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It includes a single-sided edge banding machine capable of processing various edge materials up to 20 mm thickness. If you are looking to get high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edgebander we have for sale. Contact us for further details. • Line workpiece capacity: • Length 250–3000 mm • Width 120–1200 mm • Thickness 8–60 mm • Edge bander (KAL 330) — base and transport • Continuous machine base; workpiece support with roller bar extendable ~800 mm • Transport chain 80 mm wide with rubber surface; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18–25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece overhang/supernatant 30 mm • Workpiece thickness 12–60 mm • Edge material from strip: 0.4–20 mm (max cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max cross-section: PVC 135 mm², veneer 100 mm²) • Max coil diameter 830 mm • Pneumatic connection 7–8 bar • Infeed system and controls (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic infeed (lengthwise and crosswise); for precisely sized, square parts • Stepless infeed guidance adjustment (axis), speed set at input terminal • Automatic side adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Input terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granule storage • Quick-lock system for QA/QE application unit; QA front glue storage for color change • Basic gluing unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Trimming unit HL84 with standing trimming stop for sensitive edges • Pneumatic trimming motor adjustment (2 positions: flush/level and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side trimming stop adjustment when edge thickness changes • Rough milling unit: 2 motors stacked, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: roughing with ~0.2 mm overhang / without overhang • Reserved free space for a fine milling unit • Contour milling unit Servo FK13 automatic: • 2 motors each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-fold tool changer • Feed speed max 20 m/min; minimum spacing between workpieces 500 mm • Workpiece thickness 12–60 mm • Automatic FK adjustment for identical radii on different edge thicknesses; auto retract • FK workpiece guidance with additional clamping for min part length 120 mm (single-sided) • Finishing and cleaning • Multi cleaning unit MN21 automatic: • Up to 3 profiles; tracing from top/bottom/side for chamfer and rounding on pre-milled PVC edges • Electropneumatic air nozzles; automatic chamfer/radius changeover; auto retract of upper/lower tool • Height adjustment via top pressure Lrodpsytf Irofx Akfjk • PVC shavings separator top/bottom

Condition: excellent (used), Year of construction: 2010, FEATURES: Special equipment with nesting Max. glued edge thickness 20 mm Max. glue height 60 mm Max. rolled material thickness 3 mm Min. workpiece width 60 mm Max. feed rate m/n 25 m/min Stepless feed Electric height adjustment Top belt pressure Preheating zone Glue granule system with pre-melt container Glue container changeable/variable Spraying device Assembly milling unit End milling unit 2 motors Flush/radial/chamfering milling stations 1 Corner copying unit 2 motors Edge scraper: profile and flat Polishing unit Strip magazine Synchronized units NC axis(s) Machine version left-hand side Quick change unit(s) HOMAG Infeed device 2 rollers HOMAG A 20 gluing unit HOMAG HL 84 HOMAG FK 11 HOMAG PN 10 Profile scraping unit HOMAG FA 11 finishing unit Control PowerControl PC 22 Weight 5,000 kg Machine length 7845 mm CE regulations NEW CHAINS INCLUDES: PREPARATION AND LOADING IN CUSTOMER TRANSPORT Lredpfxsukrths Akfok DOES NOT INCLUDE: TRANSPORT, ASSEMBLY, START-UP

Condition: used, machine/vehicle number: 008167, X axis working area: 6000 mm Y axis working area: 1750 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Lrodpfx Asx A Hczjkfok Number of controlled axes: 5 axes Total number of drilling spindles: 30 Total number of tool changer positions: 72

Condition: used, Year of construction: 2007, operating hours: 39,359 h, functionality: fully functional, machine/vehicle number: 0-201-04-0605, Description of the Main Equipment: Lsdpfxeyucyze Akfjrk Clamping table with matrix aluminium construction Vacuum system prepared for 1000 m³/h nesting technology Power Control control panel with PC85 Main spindle 15 kW with vibration sensor C-axis with aggregate interface Interface for FLEX-5 aggregate Plate-type tool changer with 10 positions Drilling unit: 13 spindles – 9 vertical and 2+2 horizontal spindles Software package for office computer WoodWOP Tools software Maximum positioning speed: 80 m/min in X and Y directions (vector speed: X/Y = 113 m/min) / 30 m/min in Z direction

Condition: ready for operation (used), Year of construction: 2009, Edgebander manufactured in 2009. This HOMAG PROFI KAR310/11/A20/S2 features a work piece return system BARBARIC. Consider the opportunity to buy this HOMAG PROFI KAR310/11/A20/S2 edgebander. Contact us for further details. • Condition: Used Lrodpfx Akoyhqi Dsfsk Additional equipment • BARBARIC workpiece return system