Used Homag Kl 79 for sale (486)

Condition: used, Year of construction: 2012, PUR retrofit 2023 / EasyPUR AC-34 / RIEPE spraying system LP289/99 24 V. Retrofit including 2x spare glue reservoirs. Output approximately 15,000 - 20,000 linear meters per year. Annual maintenance by HOMAG. Feed rate: 28-25 m/min; with FK 11 max. 20 m/min. Working height: approx. 950 mm. Machine length: approx. 7845 mm. Workpiece thickness: 12-40 mm standard; up to 60 mm available. Edge material roll: approx. 0.3-3 mm. Edge material strip: approx. 0.4-6 mm. Roll diameter: max. 830 mm. Pneumatics: 6 bar. Electrical: 400 V / 230 V, 3 phases, 50 Hz. Equipment: Release agent spraying unit top / bottom. Joint milling unit. Glue application unit. 2-roll edge magazine. Pressing zone. Cutting unit HL 81. Pre-milling unit BF 10. Profile milling unit FK 11. Trimming blade PN 10. Finishing unit with glue joint trimming blade and buffing unit. Preparation for HOMAG laserTex powerControl PC 22 with touchscreen. Automation packages. Trimming blades for 2mm as well as for 1 mm edges. Location: Customer. Dwodpfx Ajzxf Sysptjb

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Dsdsylp Slepfx Aptswb Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: P260713249, The HOMAG SAWTEQ B-300 profiLine is a high-performance industrial beam saw designed for the precision cutting of coated and uncoated wood-based panels. Engineered for continuous production environments, it combines robust mechanical construction, high cutting performance, automated material handling, and intelligent digital control to maximize productivity while maintaining exceptional cut quality. Key performance features include a 3,800 mm cutting length, ±0.1 mm/m positioning accuracy, and a powerful 24 kW main saw motor with a 2.2 kW scoring saw, ensuring clean, chip-free cuts even on laminated materials. The saw carriage reaches feed speeds of up to 130 m/min, enabling short cycle times and high daily output. Material handling is highly automated through a 4-ton hydraulic lifting table, dual micro-feeders, automatic loading for thin panels, alignment units, and an optimized pusher system equipped with 11 lifting clamps. Air cushion tables with integrated air nozzles facilitate effortless panel movement while protecting sensitive surfaces from scratches. The machine is built around a heavy-duty steel frame with precision rack-and-pinion drives, maintenance-free measuring systems, and a patented central squaring system that reduces cycle times by up to 25% compared with conventional designs. The robust construction ensures long-term dimensional accuracy, minimal vibration, and excellent repeatability. Dwodpfxozmglks Aptob Operation is managed through the PowerControl V2.1 system with a 24-inch Full HD multi-touch display, HOMAG powerTouch interface, CADmatic 5 software, integrated diagnostics, tool management, and network connectivity. The machine is also tapio Ready, enabling future integration with HOMAG's digital production ecosystem and Industry 4.0 services. Additional features such as ecoPlus energy-saving technology, automatic cutting height adjustment, optimized dust extraction, pneumatic saw movements, electric scoring saw adjustment, and remote diagnostics via TeleServiceNet further enhance machine efficiency, reduce operating costs, and simplify maintenance. Overall, the SAWTEQ B-300 profiLine provides an ideal solution for manufacturers seeking high productivity, precision, automation, and digital connectivity in industrial panel processing.

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-43-0070, functionality: fully functional, operating hours: 2,731 h, power: 10 kW (13.60 HP), input voltage: 300 V, input current: 32 A, year of last overhaul: 2026, Equipment: documentation/manual, 3-AXIS (X-Y-Z) CNC MACHINING CENTER Movable table (workpiece), movable machining head Vertical table (workpiece) Cec Ard Uoyywcvspnjrd Control system: POWERCONTROL + POWERTOUCH Software: woodWOP Safety cabin for the machining head No. 1 locking system for workpiece clamps in the working area Dsdpfezi Ul Rsx Aptowb Workpiece drive with transport chain Minimum workpiece dimensions (X-Y-Z) mm 200 x 70 x 12 Maximum workpiece dimensions (X-Y-Z) mm 3050 x 850 x 60 Total connected power (kW): approx. 11.5 WORKING GROUPS: No. 1 drilling unit (Power (kW) 2.3) with vertical spindles: - No. 13 independent vertical drilling spindles (V13 High Speed) - No. 6 independent horizontal drilling spindles (4 in X + 2 in Y) No. 1 grooving saw unit (for operations in the X-axis) diameter (mm) 100 No. 1 vertical main spindle (milling unit) HKS63 (Power kW 5) Automatic tool changing system - magazine positions (No. 4 tool positions)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 Dedpfx Aszmrw Septjwb • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Condition: good (used), Year of construction: 2003, functionality: fully functional, Good condition, see photo. For Homag KL series edge banding machine. Dwedpfoy N Ulaox Aptsb

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue pots, joining, corner copying, and two scraper blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness approx. 0.4 - 3 mm Workpiece height approx. 10 - 40 mm Feed speed approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x100mm, 4x80mm including the ductwork shown, connecting to 200mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be saved Units: Top pressure, manual adjustment with crank and SIKO counter Infeed guide, manual adjustment with SIKO counter Joining cutter with diamond cutters, sharpened Total of 2 interchangeable glue pots for quick color change from white to transparent Gluing section with automatic edge feed for roll material up to 3 mm Pressing zone with 3 rollers Miter saw with 2 motors Combination router unit, easily adjustable by hand for flush trimming, chamfering, and rounding Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius scraper blade R2, manually adjustable Dwodpfx Apszn Afpetsb Glue joint scraper blade with large roller, pneumatically controlled Hood locking mechanism CE marking Operating manual in a folder All indexable inserts of the router units and scraper blades have been renewed or re-sharpened, saws have been sharpened, and diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been renewed, but is still sharp. Original paint, with only a few spots touched up. Dust extraction hoses renewed. Approx. 1200 operating hours, which is only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight approx. 950 kg. The machine can be demonstrated on-site after arranging an appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Condition: excellent (used), A complete furniture production plant, composed of the following main machines: 293000) “HOMAG” KFL flexible Sizing-Milling & Edge Banding line (with HIGH-PERFORMANCE PAKET) 239100) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex with CELASCHI splitter Dwodezwk Idepfx Aptsb 231200) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex 238000) Flexible CNC Drilling Line “MORBIDELLI+MAHROS+RBO” Flexa 912 238400+200027) 2 x Flexible CNC Drilling Lines “MORBIDELLI+MAHROS” Author 912/924 231200) Flexible CNC Drilling Line “COMEC+KUKA” Frontal for front doors (of furniture) 214000) Digital Printing Line “PROJECTA+GIARDINA+UNIVERSAL+KUKA” 200002) Laminating (coating) Line “HYMMEN-KONTRA” 200037) Production Line “OMGA+BALESTRINI+GANNOMAT+DOUCET” for cabinet front doors/drawers (5 pieces) 200006) “HOLZMA” panel saw, Mod. HPL 400/43, with KUKA robot for unloading and stacking 237100+237200) 2xCNC machines “BIESSE” Skipper 130 CNC+237000+200028) 2x“BIESSE” Skipper 100 237300+200078) 2 x CNC machines “MORBIDELLI” CX 200 + CX 210 CNC machines 200034+200033) 2 x CNC drilling and dowel inserting machines “KOCH+BIESSE” Sprint PTP + HELIX K3 200029 + 200030) 2 x CNC Nesting machines “BIESSE” Rover A FT 1531 CNC (1 with loading and unloading) 200031A + 200032A) 2 x CNC machines “BIESSE” Rover B 1967 Edge (with KUKA robot) 200035) CNC machine “BIESSE” Excel (4 vertical electric spindles) for cabinet front doors 220700) Edge Banding machine “HOMAG” KAL 330 (with LIGMATECH workpiece return system) 200009+200010) 2 x Edge Banding machines “SCM” STEFANI XD (1 with workpiece return system) 200018+200019) 2 x Edge Banding machines “HOMAG-BRANDT” KDF 440 C and KDF 650 261200 + 261300) 2 Cardboard Packaging Lines “DYNATEC+ROBOPAK+KUKA” 2VAC01 + 2VAC02) Extraction systems (AIREX, TECO Westinghouse, Ingersoll-Rand) And many other machines (various ATLAS COPCOM and INGERSOLL RAND compressors, HOMAL KL/KR edge banding machines, HOLZMA and SELCO panel saws, ROBOPAC packaging machines), as well as roller conveyors, shelving, etc. The machines are still installed at the former owner’s premises and can be viewed by appointment.

Condition: used, Year of construction: 2013, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Weight: 6.000 kg - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes Dedjyrp Uaspfx Aptjwb - └ 2nd unit type: Glue unit - - Type/Brand: Nordson - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Dwedpfxogy Da Ss Aptsb -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg

Condition: used, functionality: unexamined, Ferwood Code: AGG0215 - Manufacturer Code: 2-017-95-5550 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - WEEKE - If interested, we offer a reconditioning service; please contact us. Dedpfx Apezmht Aotewb

Condition: used, Year of construction: 2016, functionality: fully functional, We present a fully automatic EDGEBANDING LINE for sale! The line can be inspected in production at any time and is available immediately! HOMAG SINGLE-SIDED EDGE BANDING MACHINE PROFI KAL330/9/A3/WZ, year 2013 HOMAG FEEDING TABLE FLEXLINE PROFI TBL100/20/30/F, year 2013 HOMAG SINGLE-SIDED EDGE BANDING MACHINE PROFI KAL370/8/A3/WZ, year 2016 HOMAG DOUBLE ANGULAR TRANSFER CROSSWISE POWER TWL410/25/LQ, year 2016 PROFI KAL330 - Free Space Jointing Trimming Unit - Gluing Part A3 Basic - Free Space Processing Units - Finishing Unit FA11 Workpiece and edge parameters: - Workpiece width without edge min: in case of workpiece 60 mm* Thickness 12-22 mm in case of workpiece Thickness 23-60 mm 100 mm* *depends on the workpiece length. - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge height max. = workpiece + 4 mm Thickness - Edging material on coil 0,3-3 mm - Edging mat. cross section max. (PVC 135 mm², Veneer 100 mm²) - Coil diameter 830 mm PROFI TBL100/20/30/F Fixed stop side on the left - incl. transport rollers - roller diameter 54 mm - roller distance approx. 60 mm - incl. lateral conveyor belt - electro pneumatically controlled crosswise fence Dwjdpfjy Thlzox Aptjb - adjustable infeed fence, manually via counter - incl. kit for small parts - incl. integrated air cushion table Workpiece parameters: - Panel length: min. 240 mm/ max. 2500 mm - Panel width: min. 120 mm/ max. (TBL../20/30) 3000 mm PROFI KAL370 - Free space Jointing Trimming unit - Gluing part A3 basic - Free space processing units - Finishing unit FA21 Workpiece and edge parameters: Workpiece width without edge min: in case of workpiece 60 mm* (thickness 12-22 mm) in case of workpiece 100 mm* (thickness 23-60 m) *depends on the workpiece length - Workpiece overhang 30 mm - Workpiece thickness 12-60 mm - Edge height max. = workpiece + 4 mm thickness - Edging material on coil 0,3-3 mm - Edging mat.cross section max. (PVC 135 mm², Veneer 100 mm²) - Coil diameter max. ¦ 830 mm POWER TWL410/25/LQ - Fixed stop side infeed: left, outfeed: left - Roller diameter 64 mm - Roller distance 110 mm - Infeed roller track with belt conveyor and cross transport - Cross conveyor belt controlled - Outfeed roller track - Cross conveyor belt controlled - Stop fence electro pneumatically controlled - Transport belt lateral - Modification of panel overhang manually adjustable Workpiece parameters: - Panel length min. 240 mm/ max. (TDL../25/..) 2500 mm - Panel width min. 240 mm - Panel thickness min. 8 mm/ max. 60 mm - Panel weight max. 80 kg

Condition: excellent (used), Year of construction: 2021, Used HOMAG Drillteq V-200 - Year of manufacture: 2021 - Immediately available - Excellent condition - Tools can be included for an additional charge. Djdpozdvuvefx Aptswb Please feel free to contact us if you have any questions.

Condition: good (used), functionality: fully functional, Equipment: CE marking, documentation/manual, Complete Homag double-spindle corner routing machine with scoring blade, chipper, 4 routers, edge sanding belt with rotating tables and drilling machine (optional) and without stacking mechanism. Dwedpfsy U Irqsx Apteb

Condition: excellent (used), Homag Drillteq 050, vertical CNC drilling and milling center Working area: Length X: 3050 mm Width Y: 850 mm Thickness Z: 60 mm 5kW milling spindle 8 vertical drilling spindles, Dodezx S Nfjpfx Aptswb 6 horizontal drills (4 drills on the X-axis, 2 drills on the Y-axis), Saw blade for X-axis grooving, Software: Homag Woodwop 7.1 Machine in very good condition, Year: 2019 Few hours of operation CE marking Weight: 1750 kg

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. Dwsdpfxszr N H Ue Aptsb • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Dedpfx Apjzqggvetjwb Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...

Condition: used, Year of construction: 2021, input current: 21 A, input frequency: 50 Hz, We are offering this used HOMAG DRILLTEQ V-200 through-feed drilling machine, manufactured in 2021. The machine has been regularly serviced by HOMAG. The package includes a KOGI dust extraction unit (2.2 kW / 1,650 Pa), two collection bags, and various tools. Specifications Vertical drilling block with 13 spindles Horizontal drilling block with 4 spindles on the X-axis Horizontal drilling block with 2 spindles on the Y-axis Dwodpfx Aey Extmjptjb Grooving saw, Ø100 mm Correctness control system 10 kW tool-changing spindle Maximum workpiece length: 200–3,050 mm Workpiece width: 70–850 mm Workpiece thickness: 8–56 mm PowerTouch display WoodWOP software included Machine Data Type: DRILLTEQ V-200 OPTIMAT BHX050 Serial number: 0-250-73-6562 Year of manufacture: 2021 Power supply: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Rated current at full load: 21 A Fuse rating: 25 A Control voltage: 24 V The package also includes a KOGI dust extraction unit with a 2.2 kW motor and 1,650 Pa suction pressure, equipped with two collection bags, as well as various tooling. Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: used, Year of construction: 2001, machine/vehicle number: 0-34-07-5949, functionality: fully functional, input voltage: 24 V, input current: 48 A, input frequency: 50 Hz, cutting height (max.): 320 mm, cutting width (max.): 60 mm, We offer this used HOMAG Optimat chf 41 circular table saw, year of construction 2002. Manufacturer: HOMAG Dedpfxozq Hwhe Aptewb Model: Optimat chf 41 Construction year: 2002 year Condition: used Category ID: 2094 Type ID: 1612 Machine type: circular table saw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM Dedpjzg Epujfx Aptswb SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Dedpfx Ajy Exwfoptjwb Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dwjdpfx Apozvnfweteb Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: good (used), Year of construction: 2014, machine/vehicle number: 0-200-01-2196, functionality: fully functional, input current: 63 A, height adjustment type: electric, feed rate X-axis: 25 m/min, actuation type: electric, total height: 2,000 mm, total length: 7,850 mm, total width: 2,300 mm, overall weight: 5,000 kg, Equipment: CE marking, documentation/manual, Edge banding machine, good working condition, fully electric adjustments, working speed 25m/min, available immediately. Djdpsy Ebl Sofx Aptewb

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: CE marking, HOMAG Optimat BOF 31/40/K Manufacturer: HOMAG Group (Germany) Type of machine: CNC machining center with a cantilever table Year of manufacture: 2001 Design: Stable gantry design (movement in the X-axis is provided by the gantry) Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm (working area for one large part or shuttle operation) • Y-axis (width): 1,200 mm (tool reach during milling) Dwsdpfx Ajzr N E Djptsb • Z-axis (stroke): 400 mm (max. workpiece passage including clamps approx. 100 mm) Working table (Version K – Cantilever) • Number of cantilevers: 8 sliding beams (cantilevers). • Clamping elements: Two-circuit vacuum system. Suction cups can be freely positioned on the cantilevers. • Positioning aids: Pneumatically controlled stops (rear and front row) for easy and precise positioning of parts. Aggregates and equipment • Main spindle: Power 11 kW, HSK F63 clamping, liquid-cooled. • Tool changer: 12-position disc tool changer, which moves together with the gantry in the X-axis. Control and Software • Control system: HOMAG PC85 (industrial PC based on Windows). • Programming: woodWOP 5.0 / 6.0 (graphical interface for creating macros and drilling patterns). • Vacuum pump: Typically Busch with a capacity of 100 m³/h (standard for cantilever machines).

Condition: good (used), Year of construction: 2014, machine/vehicle number: 0-201-76-6720, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 270 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BMG311 VENTURE316XXL 6m machine 10 consoles 6 stops at the rear 6 stops at the front Vacuum system 2 x 90/108 m³/h (50/60 Hz) Dwedexw H Tcopfx Aptob LED position display system 5-axis main spindle 10 kW Drive5C Programming 5-axis spindle with WoodWop 18-position disc changer below Drilling head with 21 spindles: V17/H4/S0/90° Safety barrier on the left Viewing element barrier on the right VENT.+BMG+B200/300 Chip conveyor on the right PowerClamp pneumatic package for K+AP table Performance pack for Drive5C 9-position linear changer for BMG311 without FLEX5 Measuring probe for tool changer Visualization of vibrations on machining spindle collisionControl Barcode reader package VENTURE for 1D codes HOMAG GROUP control system PowerTouch WoodWop CAD plugin WoodWop CAM plugin Professional Machine WoodMotion