Used Hose for sale (2,393)

Condition: used, MERKLE Insquare W 300 AC/DC Welding Machine with original hose set Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC Range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC Range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A Electrode Welding: Electrode diameter: 1.5-6 mm Open-circuit voltage: 80 V Working voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding Processes: 10-stage switch: TIG DC Negative, TIG DC Positive, TIG DC Negative with start pulse, TIG AC low-noise, TIG AC Rectangular TIG AC "Balanced TIG", Electrode Negative Electrode Positive Electrode "Sinusoidal" Electrode Rectangular Selector Switch 1: 10-stage switch: Current 1, Time 1, Ramp-up and ramp-down time, Starting current, ending current, Ignition pulse, point time, Pre-gas and post-gas time Selector Switch 2: 9-stage switch: Current 2, Time 2 (for pulse operation), AC balance, AC frequency, Hot start time and current, Current adjustment, Electrode diameter, display U Settings: 2 potentiometers for selector switch 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Time functions: 4-stage switch: OFF, Slow pulsing, Fast pulsing, Spot welding Bwsdpjl Sm Hbjfx Aknsw Ignition: 4-stage switch: OFF, High frequency, Lift-TIG Energy control: 4-stage switch: on the unit, Hand or foot remote control, Welding torch Operating mode: 4-stage switch: 2-stroke, 4-stroke, 4-stroke with 2 currents, Gas test, Test, Program Program memory: 20 memory locations freely assignable AC frequency: 50-200 Hz AC balance: 9-91 % Pre-gas time: 0-3 s Post-gas time: 0-25 s Current rise time: 0-2 s Current fall time: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Slow pulsing: 10 ms-2.5 s Fast pulsing: 50 Hz-5 kHz Hot start time: 0-1.5 s Hot start current: 10-200 % Current adjustment: 100-250 % Button: Test protection device Button: Program selection LED: Power ON, Over temperature, Fault, Protection circuit, Display hold, Start current Rise, Current 1, Current 2, Fall, End current Power source: IGBT inverter Ignition: High frequency or Lift-TIG Standard: EN 60974-1 "S" / CE Torch connection: EURO central connection with 5-pin connector Torch cooling: Water circulation cooling system Socket 50 mm²: Workpiece cable Socket 50 mm²: Electrode welding cable Power connection: 4 x 4 mm², 5 m long Gas connection hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder Gas bottle holder: 10 - 20 - 50 l gas bottle More items - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, MORI SEIKI NHX 4000 CNC Horizontal Machining Center with Pallet Changer General Machine Data Manufacturer: MORI SEIKI Model: NHX 4000 Year of Construction: 2012 Control System: Siemens Sinumerik 840D solutionline with SLIMline operator panel Machine Type: CNC Horizontal Machining Center Number of Axes: 4 (X, Y, Z, B) Travel and Feed Rates X-axis: 560 mm Y-axis: 560 mm Z-axis: 660 mm B-axis: 360° NC rotary table Rapid Traverse X/Y/Z: 60 m/min Maximum Feed Rate: 60,000 mm/min Main Spindle Maximum Spindle Speed: 12,000 rpm Tool Interface: HSK-A63 Spindle Power: Dependent on the installed spindle version Internal Coolant Supply (ICS) through the Spindle Tool Changer Automatic Tool Changer Tool Interface: HSK-A63 Tool Magazine: 40 positions Maximum Tool Diameter: approx. 70 mm Maximum Tool Diameter with Free Adjacent Positions: approx. 170 mm Maximum Tool Length: approx. 450 mm Maximum Tool Weight: approx. 8 kg Work Table and Pallet Changer Automatic 2-position Pallet Changer Pallet Size: 400 × 400 mm Maximum Pallet Load: approx. 400 kg Maximum Workpiece Diameter: approx. 630 mm Maximum Workpiece Height: approx. 880 mm B-axis: 360° Equipment Siemens Sinumerik 840D solutionline SLIMline operator panel HSK-A63 main spindle with 12,000 rpm Automatic Tool Changer Automatic 2-position Pallet Changer NC rotary table / B-axis Internal Coolant Supply (ICS) Chip Conveyor Coolant System Bwodpfxe Agn Tle Aknsw Machine Dimensions and Weight Length: approx. 4,214 mm Width: approx. 2,720 mm Height: approx. 2,512 mm Machine Weight: approx. 8,000 kg The machine has been regularly maintained. All hydraulic and air hoses have been replaced. Spindle hours: 39,000

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: E-018455, Two units are for sale. One in blue and one in green. The price quoted is for one unit. Bedpfezqvafjx Aknjww

Year of construction: 2025, condition: used, functionality: fully functional, This is a hood-type dishwasher from the manufacturer Meiko, model Upster H500 M2, manufactured in 2025. The machine has undergone a major inspection in our in-house workshop and is therefore fully functional and free of defects. It is offered with a 6-month warranty on all electrical components. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional Flexible choice of delivery or self-collection Competent advice - before and after purchase Provision of operating manuals, wiring diagrams & spare parts Inspection according to DGUV V3 Bwedpfx Ake Ahnmkjnsw Technical data: W x D x H: 635 x 750 x 1470 mm (2050 mm) Basket size: 500 x 500 mm Clearance height: 440 mm Program cycle time: 90 / 150 / 210 s Basket capacity: 40 / 24 / 17 baskets/h (theoretical) Tank capacity: 22.0 L Rinse water quantity: 2.6 L/rinse cycle Total connected load: 10.7 kW Fuse rating: 19.5 A On-site boiler heating: 7.50 kW / 10.82 A Tank heating: 2.00 kW / 8.70 A Washing pump: 0.75 kW / 4.60 A Machine protection rating: IP X4 Serial number: 10640578 Year of manufacture: 2025 Condition: Used, inspected and fully functional Your advantages: Simple operation thanks to clear and easy-to-understand symbols Digital temperature displays for washing and rinsing water 3 program cycle times Eco-filter system for the best cleaning result thanks to warmer and filtered tank water Machine and hood double-walled – ideal thermal and noise insulation Hood open at the rear – prevents steam from bothering the operator Temperature-dependent washing time extension – hygiene safety under all operating conditions Washing and rinsing systems made of stainless steel Hood start-up automatic Including lye pump, pressure booster pump and rinse aid and detergent dosing devices, basket equipment Optional: with built-in water softener EW 10 Further details: Rack dishwasher Structure and interior made of CrNi steel 18/10 or high-quality, corrosion-resistant materials Deep-drawn tank with easy-to-clean curves Tank and hood double-walled insulated Hood with CrNi hood handle can be opened upwards on three sides Hood start-up automatic (program start by pressing down the hood handle) CrNi rotary arm washing and rinsing systems CrNi tank cover sieve for coarse contaminants Sloping roof with an internally running water channel Supply lines outside the washing chamber Eco-filter system for the best cleaning results and the lowest cleaning effort Fully electronic control with operator display Digital temperature display for washing and rinsing water Self-cleaning program Pressureless stainless steel boiler Connection possible to the left or right Connection set, consisting of supply and drain hose and electrical cable (each 1.6 m from the machine) Wall connection profile to the rear Noise level: 65 dB(A) Standard equipment: Liquid detergent dosing device with suction lance for on-site storage containers Rinse aid dosing device with suction lance for on-site storage containers Connection set Lye filter system AktivPlus Pressure booster pump Basket base equipment: 1 universal basket VKV 50/1 Subject to change and errors.

Condition: ready for operation (used), Insulation hose cutting machine Bwodpfx Ajylngzjknjw Maximum hose diameter: 10 mm

Year of construction: 2026, condition: like new (used), functionality: fully functional, machine/vehicle number: E31VK2608, This is the latest generation of the Vario Cooking Center, the iVario Pro XL with a 150-liter capacity, manufactured in 08/2026 and featuring Balanced Power from the premium manufacturer Rational (successor to the VCC 311). This unit is a like-new demonstration model that was only used for cooking demonstrations. The device has a sophisticated electronic control system with various cooking processes and extremely fast heating performance, making it versatile. The unit will be supplied including plastic feet. The iVario Pro XL is available relatively soon. The full Rational factory warranty is valid until 07/2028!!! A LIMITED NUMBER OF UNITS ARE AVAILABLE. The basic equipment is not included in the price and can be purchased for an additional charge. The images shown are example images; the original photos will follow shortly. Our service for you: 24 months manufacturer's warranty from the manufacturer's date (until 07/2026) High-quality branded devices at fair prices Professional refurbishment / inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1365 x 894 x 1078 mm Power connection: V: 400 / kW: 34 / Hz: 50 Serial number: E31VK2608 Bwedpfxe Af Nlie Aknsw Year of manufacture: 08/2026 Capacity: 150 liters Weight: 245 kg Condition: Well-maintained with signs of use, inspected, fully functional Special features: iCookingSuite - intelligent cooking assistant with 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, milk and desserts, soups and sauces, or 5 cooking processes: boiling, frying, deep-frying, stewing and finishing iZoneControl: flexible division of the pot base into zones with different temperatures. Low-temperature cooking (also overnight), confit, sous-vide cooking. Vario Cooking Control mode: the desired result of the product is selected with a finger tap, e.g. from light to dark. Vario Boost: patented heating system for absolutely even and precise temperature transfer. Programming mode: creation of manual programs and management of cooking processes. Integrated WiFi interface, e.g. for connection to ConnectedCooking. Further information: integrated socket 230 V integrated hand shower with automatic retraction and spray dosage high-quality pot base, seamless with rounded corners core temperature sensor with 6 measuring points 1,200 programs with up to 12 steps each, programmable and nameable integrated hose shower on the unit, integrated water drain in the pot Temperature unit adjustable in °C or °F Tilting cooking pot Lid with integrated water inlet Automatic display of service messages IPX5 spray water protection USB interface for HACCP data output and updates including base cabinet with plastic feet Functions: manual mode (30°C-250°C): adjustment of liquid temperature, adjustment of pot base temperature, adjustment of oil temperature automatic, liter-accurate water filling device Delta-T cooking Auto Lift: lifting and lowering device (baskets for cooking and deep-frying) The deep-frying function is locked but can be unlocked. Subject to changes and errors. You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00.

Condition: used, Year of construction: 1983, functionality: fully functional, For sale: a professional WIELAND IS-75 R industrial vacuum cleaner. The unit has been inspected, is in full working order, and ready for use. It features a robust metal construction on wheels, equipped with a handle for easy movement. Technical data from the nameplate: - Manufacturer: WIELAND, Germany - Model: IS-75 R - Year of manufacture: 1983 - Serial number: 996 - Power: 5.5 kW - Power supply: 380 V, three-phase Bsdj Aff Rgspfx Aknsww - Frequency: 50 Hz - Rated current: 11 A - Rotational speed: 2880 rpm - Protection rating: IP44 - Weight: 320 kg The set includes a suction hose and accessories visible in the photos: nozzles, brushes, and pipes. The unit has a side compartment for storing accessories. Used condition, with visible signs of use, scratches, and minor paint chipping. Technical condition: inspected and functional.

Condition: good (used), Extruder for the production of plastic pipes The machine can be inspected by appointment! Videos demonstrating its operation can be viewed on the manufacturer's website! Bwodpfxjxcwxys Aknow

Condition: used, Watson Marlow 323S/D Peristaltic Pump *New price: 9890 The pumps in the 323 series feature a chemical-resistant ABS top and IP31 protection, as well as a foil keypad for controlling the pump and a digital LCD for displaying the speed. - 323S high-performance pumps with manual control - Universal pump for precise dosing or transfer applications - Flow rate range: 0.1-2000 mL/min - Speed range: 3 to 400 RPM (adjustable in steps of 1 RPM) - Display type: LCD - Reversible: Yes - The pumps in the 323 series feature a chemical-resistant ABS top and IP31 protection, as well as a foil keypad for controlling the pump and a digital LCD for displaying the speed. - Dimensions (L x W x H): 230 x 230 x 132 mm - Condition: Used Bwedpfstnct Usx Aknjw You can find more laboratory equipment – new and used – in our shop! International shipping costs available upon request!

Condition: used, 1. Milling Section - 4-roller mill (BrauKon) with a capacity of 1,200 kg/h, continuously adjustable gap width, and a pneumatic slide gate. The malt hopper above is equipped with an empty-level sensor. 2. Brewhouse 3-vessel brewhouse with stainless steel vessels, mounted on a brewing platform featuring rustic wooden flooring and staircases. The brewhouse is fully piped with pneumatic butterfly valves and comprises the following components: - Mash/wort kettle with steam-heated bottom, frequency-controlled agitator, high-performance pre-masher (BrauKon), steam valve, and condensate separator. - Lauter tun with frequency-controlled raking mechanism, digital differential pressure measurement, and false bottom with removable slotted screen segments. Spent grain discharge is semi-automatic, featuring an integrated spent grain plow and pneumatic slide gate. - Whirlpool with glass manway, automated trub discharge, and two clear wort outlets. - 3 frequency-controlled wort pumps (Hilge). - Single-stage plate heat exchanger (Kelvion) ​​for cooling cast-out wort against ice water; equipped with a wort aeration unit (Kieselmann). - Flow and temperature measurement devices as well as empty-state probes (Endress+Hauser) - Brexmaxx process control system (Proleit) for controlling the brewhouse, milling area, fermentation cellar, and CIP system - 2 control cabinets 3. Tanks - 3 stainless steel cylindro-conical fermentation and storage tanks, each with a gross capacity of 12 hl; each equipped with a pressure gauge, spunding apparatus, butterfly valves, sampling cock, discharge lines at the cone tip and cone side, and a cleaning line. Furthermore, one of the tanks is equipped with a fermentation monitor (Endress+Hauser) and a digital pressure sensor (Endress+Hauser) for continuous extract and alcohol measurement. This enables fully automated fermentation control via the process control system. - 4 stainless steel cylindro-conical fermentation and storage tanks, each with a gross volume of 2.5 hl and a top manhole. Equipped with cooling jackets on the cylinder and cone sections, a bunging apparatus, pressure gauge, butterfly valves, sampling cock, two outlet lines, and a cleaning line. - 8 horizontal stainless steel storage tanks with front manholes, arranged in pairs on a rack. Each is equipped with a cooling jacket, pressure gauge, bunging apparatus, hose-type level indicator, sight glasses, and an outlet line with a manual valve. - 1 vertical stainless steel storage tank with a total volume of 12 hl and dished ends. Equipped with jacket cooling, bunging apparatus, pressure gauge, and butterfly valves. 4. Operational Equipment - 12 hl vertical stainless steel hot water tank with insulation and steam heating. Equipped with a variable-speed hot water pump (Grundfos, 2.2 kW), digital temperature measurement, low-level probe (Endress+Hauser), pneumatic butterfly valves with feedback, steam valve, and condensate trap. - 15 hl vertical PU cold water tank with insulation. Equipped with a cold water pump (Grundfos, 2.0 kW), temperature and level sensors (Endress+Hauser), pneumatic butterfly valves with feedback, and an integrated heat exchanger (Kelvion). - CIP system consisting of 2 vertical, open stainless steel tanks (each with a lid) for caustic solution and... Acid tank. Both tanks have a capacity of 2.5 hl each. The caustic tank can be heated via two electric heating elements. The system features fixed piping and is equipped with a frequency-controlled 3... Bwodpo Ahthzefx Aknsw

Condition: used, Watson Marlow 120U/DV Peristaltic Pump *New price 9,100 The pumps in the 100 series are the ideal choice for maximizing yield in fermentation and cell culture applications. These pumps not only offer high performance and reliability but also ease of use for single-use systems. Flawless tubing changes take only a few seconds, which further increases the efficiency of your processes. Biopharmaceutical processes require precise and repeatable pump performance that is easy to validate. Our 100 series offers exactly this flexibility and purity with its exceptional speed range of 2,000:1, which is essential for drug testing. The keypad lock secures your pump parameters to ensure consistent and repeatable performance. Technical data: - Enclosure protection class IP 31 - Maximum pressure 30 psi - Model 120 U/DV - Flow rate 0.001 to 170 ml/min at 30 psi - Motor speed 0.1 to 200 rpm - Temperature 5 °C to 40 °C - Pump weight approx. 2 kg - Torque 0.4 Nm continuous operation Bsdpfottzgdox Aknsww - Noise level < 60 dB(A) at a distance of 1 m - Standard CE, cETLus - Power supply Supplied with 24 VDC mains transformer plug Condition: used You can find more laboratory equipment – new and used – in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, CNC Horizontal Machining Center with Pallet Changer DECKEL MAHO DMC 55 H duoBLOCK Year of manufacture: 2008 Control system: Siemens Sinumerik 840D Machine type: CNC Horizontal Machining Center Number of axes: 4 (X, Y, Z, B) Spindle hours: approx. 44,000 hours Travel distances X-axis: 560 mm Y-axis: 600 mm Z-axis: 600 mm B-axis: 360° NC rotary table Bodpo Agn Scofx Aknjww Rapid traverse rate X/Y/Z: 40 m/min Positioning accuracy according to the manufacturer: ± 0.003 mm Repeatability according to the manufacturer: ± 0.001 mm Main spindle Spindle speed: 12,000 rpm Tool interface: HSK-A63 Spindle power: 20 kW (40% duty cycle, standard version according to the manufacturer) Spindle torque: 110 Nm (standard version according to the manufacturer) Tool changer Tool magazine: 40 tool positions Tool interface: HSK-A63 Maximum tool diameter: 80 mm Maximum tool diameter with free adjacent positions: 160 mm Maximum tool length: 330 mm Automatic tool change Work table and pallet changer Automatic 2-position pallet changer Pallet dimensions: 400 × 400 mm Maximum pallet load: 500 kg Maximum workpiece height: 850 mm NC rotary table with 360° B-axis Equipment Siemens Sinumerik 840D CNC control system HSK-A63 main spindle with 12,000 rpm 40-position tool magazine Automatic 2-position pallet changer NC rotary table / B-axis Internal cooling system (IKZ) Chip conveyor Measuring probe Coolant system Electrical connection data Mains connection: 400 V / 50 Hz Connected power: approx. 58 kVA Maximum circuit breaker rating: approx. 100 A Dimensions and weight Length: approx. 5,000 mm Width: approx. 3,000 mm Height: approx. 2,800 mm Machine weight: approx. 11,000–13,000 kg The machine has been regularly maintained. All hydraulic and air hoses have been replaced. Emergency stop switch on the control panel is defective. Clamping devices and tool holders are not included.

Year of construction: 2017, condition: ready for operation (used), Max. load: 50kg, min. pick up height: 700mm, max. dropping height: 1800mm, stroke: 1100mm, the machine was hardly used, with bottom plate and documentation, without spare parts. Bwodpfxol I Ewfe Aknjw

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, CNC horizontal machining center with pallet changer DECKEL MAHO DMC 55 H duoBLOCK Year of manufacture: 2008 Control system: Siemens Sinumerik 840D Machine type: CNC horizontal machining center Number of axes: 4 (X, Y, Z, B) Spindle hours: approx. 46,000 h Travel distances X-axis: 560 mm Y-axis: 600 mm Z-axis: 600 mm B-axis: 360° NC rotary table Rapid traverse X/Y/Z: 40 m/min Positioning accuracy according to manufacturer: ± 0.003 mm Repeatability accuracy according to manufacturer: ± 0.001 mm Main spindle Spindle speed: 12,000 rpm Tool holder: HSK-A63 Spindle power: 20 kW (40% duty cycle, standard version according to manufacturer) Spindle torque: 110 Nm (standard version according to manufacturer) Tool changer Tool magazine: 40 tool positions Tool holder: HSK-A63 Maximum tool diameter: 80 mm Maximum tool diameter with free adjacent positions: 160 mm Maximum tool length: 330 mm Automatic tool change Work table and pallet changer Automatic 2-position pallet changer Pallet dimensions: 400 × 400 mm Maximum pallet load: 500 kg Maximum workpiece height: 850 mm NC rotary table with 360° B-axis Equipment Siemens Sinumerik 840D CNC control system HSK-A63 main spindle with 12,000 rpm 40-position tool magazine Automatic 2-position pallet changer NC rotary table / B-axis Bwedpfxj Agn H Uo Aknsw Internal cooling (IKZ) Chip conveyor Measuring probe Coolant system Electrical connection data Mains connection: 400 V / 50 Hz Connected power: approx. 58 kVA Maximum fuse rating: approx. 100 A Dimensions and weight Length: approx. 5,000 mm Width: approx. 3,000 mm Height: approx. 2,800 mm Machine weight: approx. 11,000–13,000 kg The machine has been regularly maintained. All hydraulic and air hoses have been replaced. Emergency stop switch on the control panel is defective. Clamping devices and tool holders are not included.

Condition: like new (used), Year of construction: 2023, 5x Vacuum Tube Lifters with Column Slewing Crane, 4m Jib, 4m Height, 80kg Load Capacity – used –: Price per unit, ex site: €12,500 (net), dismantled, packed, and loaded! Manufacturer: Timmer Bwedexugftopfx Aknew Model: S5/SON Type: lightLIFT 50 kg Article No.: S5-4000/SÄ4000/43-80SO Year of manufacture: 2023, rarely used Short Description/Application: Handling of cartons up to max. 40kg Ideal for Spax cartons Tube lifter: lightLIFT 50 kg Model: UST-LL-HE-140/50-2.5-FH Lifting unit: lightLIFT with fixed handle Handle length: 300 mm Lifting capacity: 50 kg Lift tube Ø: 140 mm Lift tube length: 2,500 mm Unit includes: - Electric vacuum blower Medium incl. motor protection switch, enclosure for motor protection, and vibration dampers Weight: approx. 54 kg Vacuum suction hose Material: PVC Diameter: 38 mm, length: 15 m Colour: Black For vacuum generators: SMALL, MEDIUM, LARGE and vacuum pump Double holder for parking the suction pads as a clamp solution for crane column 180x180mm Dual-side mount for suction pad 62740700 and cross bar 62740650 Colour: RAL7035 light grey Column slewing crane with fastening material Column slewing crane with jibs, Type RB Load capacity: 80 kg Jib length: 4,000 mm Design: - Sturdy slewing brackets - Smooth-running jib bearings (Zedex-25/K) - Manual slewing resistance adjustment (prevents arms from swinging by themselves) - Slewing range approx. 250° each Jib Arm: - 4,000 mm jib arm length - Adjustable support strut - Jib made of profile steel - Reinforcement element - P3 profile running rails (42.5x47.5x3mm), galvanized, under the jib arms - Load capacity: 80 kg Incl. slewing angle limiter Column: - Height (lower edge of running rails): 3,500 mm - Column height: 4,000 mm - Column 180x180x6 mm - Base plate with gusset plates (600x600x15 mm, optionally 1000x1000) Original new price for the 5 units approx. €70,000 (net) Available: immediately Condition: very good Location: Hamm AB (acceptance report), operating manual, etc. available as PDF upon request.

Condition: good (used), Oil conveyor, hose reel, automatic hose reel, oil hose reel -Hose reel: Automatic oil hose reel Bedpfx Akjuncx Njneww -Hose length: 5400 mm -Dimensions: 400/200/H495 mm -Weight: 18.2 kg

Condition: good (used), Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder Bwodox I Ef Ispfx Aknew -Wire feeder case: with intermediate hose package, water-cooled -Wire feed case: 4-roller drive, Ankarsrum motor -Hose package: Length 15 m -Transport dimensions: 920/630/H300 mm -Total weight: 41 kg

Condition: good (used), functionality: fully functional, power: 13 kW (17.68 HP), fuel type: diesel, empty load weight: 2,020 kg, Year of construction: 2016, operating hours: 4,472 h, Equipment: cabin, gripper hydraulics, hammer hydraulics, Mini excavator TEREX TC 20 (identical to Schaeff model) Year of manufacture: 2016 According to the hour meter: 4,472 hours 2,020 kg 13.1 kW - Quick coupler MS 01 - All hoses - Hydraulic tilting bucket - Deep excavation bucket - Cabin with heating - Work lights - Immobilizer - Central lubrication system - Hydraulic adjustable undercarriage - Ready for immediate use - Good tracks Bwjdpfx Aj Agwyfeknjw - Well-maintained machine - Includes CE certificate and all other documents Selling price: €15,500 net Affordable delivery options also available!

Condition: new, For sale: High-quality steel compensating hose (Ringwellschlauch) made of stainless steel, designed for industrial applications. This component is used to compensate for vibrations, thermal expansions, and stresses in piping systems. Ideal for installations: - industrial - heating - gas - water - process/technological ⚙️ Technical data Type: SP20 Nominal diameter: DN100 Length: 1000 mm Pressure: PN10 Material: stainless steel 1.4404 (INOX) Bodpfxsz Smkke Aknoww Standard: ISO 10380 / DIN 3384 Designation: BOA-MS (10/2022) Connections: pipe ends for welding Braid: reinforced stainless steel braid ✅ Advantages ✔ corrosion resistance ✔ high durability and flexibility ✔ vibration and noise damping ✔ compensation of thermal expansion ✔ industrial-grade product – robust construction

Condition: good (used), functionality: fully functional, power: 22 kW (29.91 HP), fuel type: diesel, empty load weight: 3,650 kg, Year of construction: 2015, operating hours: 5,180 h, Equipment: gripper hydraulics, Mini excavator TEREX TC 37 Year of manufacture: 2015 According to the meter: 5,180 hours Bwsdpfo Agu Emox Aknsw 3,650 KG 22 kW Mitsubishi engine - POWERTILT - Quick coupler MS 03 - Used ditching bucket - New deep excavation bucket! - All hoses on the arm - NEW TRACKS!! - Cabin with heater - Work lights - Ready for immediate use! - Previous owner was a gardening and landscaping company Selling price: 21,900.00 EUR net Affordable delivery also possible!

Condition: good (used), functionality: fully functional, power: 17 kW (23.11 HP), fuel type: diesel, empty load weight: 2,920 kg, Year of construction: 2016, operating hours: 4,046 h, Equipment: cabin, gripper hydraulics, hammer hydraulics, Mini excavator TEREX TC 29 (identical to Schaeff) Year of manufacture: 2016 According to the meter: 4,046 hours 2,920 kg 17.5 kW - Quick coupler MS 03 - All hoses - Hydraulic ditching bucket Bsdpfo Agwy Uox Akneww - Deep excavation bucket - Cabin with heating - Work lights - Immobilizer - Central lubrication system - Ready for immediate use - Good tracks - Well-maintained machine - Includes CE certificate and all other documents Selling price: €17,500 net Affordable delivery also possible!

Condition: new, For sale: high-quality BOA compensating (flexible) hose made of stainless steel, designed for industrial applications. 📋 Technical data: Manufacturer: BOA Type: SP20 (Ringwellschlauch) Nominal diameter: DN50 Length: 1100 mm Working pressure: PN16 Connections: flanged Material: stainless steel (INOX) Construction: corrugated hose + steel braid Certifications: DIN / VdS ⚙️ Applications: Bwodpez Smkwefx Aknjw industrial installations water and gas systems heating and steam systems compensation of vibrations and thermal expansions protection of pumps and fittings 📦 Condition: New – old stock (NOS) Possible minor storage marks (visible in the photos). Product fully functional, unused. ✅ Advantages: high resistance to temperature and pressure very good flexibility durable stainless steel construction reduction of vibration and noise in the installation 📸 Included in the offer: Exactly what is shown in the photos.

Condition: new, For sale: high-quality compensation (flexible) hose by BOA, made of stainless steel, designed for industrial applications. 📋 Technical data: Manufacturer: BOA Type: SP20 (Ringwellschlauch) Nominal diameter: DN65 Length: 2000 mm Operating pressure: PN16 Connections: flanged Material: stainless steel (INOX) Construction: corrugated hose + steel braid Certifications: DIN / VdS ⚙️ Application: industrial installations water, gas, and steam systems compensation for vibrations and thermal expansion protection of pumps, valves, and pipelines 📦 Condition: New – old stock (NOS) Possible minor traces of storage (visible in the photos). Unused and in full working condition. ✅ Advantages: high resistance to temperature and pressure very good flexibility durable stainless steel construction vibration and noise reduction Bsdpfx Akoz Smk Djneww 📸 Included: Exactly what is shown in the photos.

Condition: used, mileage: 100 km, first registration: 01/2007, fuel type: diesel, fuel: diesel, Year of manufacture: 2007 Please contact Andre, Henri, or Andre for further information. Bodjyntqqopfx Akneww

Condition: excellent (used), Year of construction: 2018, Machine Data Machine Type: Cleaning machine with solvent and vacuum cycle Intended Use: Degreasing of metallic parts contaminated with oil and chips from mechanical machining Usable Solvents: Modified alcohol; Class AIII hydrocarbons (flash point > 60 °C) Load Capacity: 30 kg Basket Dimensions: 371 × 221 × 200 mm (height 200 mm) Capacity (cycles per hour): 4–5 Filling Volume: 140 l Noise Level: < 70 dB(A) Bwedpfx As Ahfitjknow Control System: Siemens SIMATIC, operator panel SIMATIC HMI Solvent Tank: Empty, solvent not included in the scope of delivery Connection, Weight and Dimensions Dimensions: 1200 × 2000 × 1955 mm (height 1955 mm) Machine Weight: 700 kg Connected Load: 18 kW Mains Connection: 400 V / 50 Hz Auxiliary Voltage: 24 V DC / 24 V AC Equipment and Scope of Delivery Siemens operator panel SIMATIC HMI Accessory box with hoses, case, and small parts as shown in the photo Related accessories as shown in the photos Accessory box and accessories as shown in the photos. Solvent not included in the scope of delivery. Technical specifications are subject to change without notice. Errors and prior sale excepted. The characteristics agreed upon in the purchase contract and the agreed scope of delivery shall be binding.