Used Hose for sale (2,395)

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 406 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 381 mm, table width: 305 mm, table length: 914 mm, table load: 227 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,200 W, number of slots in tool magazine: 31, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS Super Mini Mill was manufactured in 2024. It features impressive travels of 406 mm in the X-axis, 356 mm in the Y-axis, and 381 mm in the Z-axis. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill vertical machining centre we have for sale. Contact us for further details. • Condition: Showroom machine • Working hours: 0 • Spindle nose to table: max 19.0 in / 483 mm; min 4.0 in / 102 mm • Spindle max torque: 22.0 ft-lbf @ 5000 rpm / 29.8 Nm @ 5000 rpm • Spindle drive system: Direct Speed, Belt Drive • Spindle bearing lubrication: Air / Oil Injection • Spindle cooling: Air Cooled • Table length: 36.0 in / 914 mm • Table width: 12.0 in / 305 mm • Table T-slot width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm Bwjdpfx Acjz Nxwijfow • Table T-slot center distance: 4.33 in / 110 mm • Number of standard T-slots: 3 • Max cutting feedrate: 833 ipm / 21.2 m/min • Rapids (X/Y/Z): 1200 ipm / 30.5 m/min • Max thrust (X/Y/Z): 2000 lbf / 8896 N • Tool changer type: Side-Mount Tool Changer (SMTC) • Tool changer capacity: 30+1 • Max tool diameter (full): 2.5 in / 64 mm • Max tool diameter, large (adjacent empty): 5.0 in / 127 mm • Max tool length (from gage line): 7.00 in / 178 mm • Tool-to-tool (avg): 2.80 s • Chip-to-chip (avg): 4.20 s • Coolant capacity: 45 gal / 170 L • Air required: 4 scfm @ 100 psi / 113.0 L/min @ 5.5 to 6.9 bar • Inline air hose & coupler: 3/8 in • Input AC voltage (3 phase) - Low / High: 220 VAC (30 A) / 440 VAC (15 A) • Shipping dimensions: 90.0 in x 80.0 in x 99.0 in / 229 cm x 203 cm x 252 cm • Shipping weight: 4650 lb / 2109.2 kg Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 2,400 rpm, travel distance X-axis: 508 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 711 mm, spindle motor power: 29,800 W, overall weight: 9,253 kg, number of axes: 4, This 4-axis HAAS ST-40SY was manufactured in 2025. It features a maximum part swing of 35.5 in and a maximum cutting diameter of 27.5 in. The machine is equipped with a 12-station turret and live tooling capabilities, allowing for versatile machining operations. If you are looking to get high-quality turning capabilities, consider the HAAS ST-40SY horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 15.0 in / 381 mm • Max Part Swing: 35.5 in / 902 mm • Max Cutting Diameter (with BMT75 turret): 27.50 in / 699 mm • Max Cutting Length: 28.0 in / 711 mm • Bar Capacity: 4.00 in / 102 mm • X Axis Rapids: 472 ipm / 12.0 m/min • Y Axis Rapids: 472 ipm / 12.0 m/min • Z Axis Rapids: 710 ipm / 18.0 m/min • Max Thrust X: 5500 lbf / 24465 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 9000 lbf / 40034 N • Spindle Nose: A2-8 • Drive System: 2-Speed Gearbox • Spindle Max Torque: 1400.0 ft-lbf @ 150 rpm / 1898.0 Nm @ 150 rpm • Spindle Bore ø: 4.62 in / 117.3 mm • XP Option Drive System: 2-Speed Gearbox • XP Option Max Rating: 55.0 hp / 41.0 kW • XP Option Max Speed: 2400 rpm • XP Option Max Torque: 2100.0 ft-lbf @ 150 rpm / 2847.0 Nm @ 150 rpm • Main Spindle C Axis Max Rating: 5.0 hp / 3.7 kW • Main Spindle C Axis Max Speed: 49 rpm • Main Spindle C Axis Positioning: ± 0.01 ° • Main Spindle C Axis Brake Diameter: 21.5 in / 546 mm • Main Spindle C Axis Brake Holding Torque: 450 ft-lbf / 610 Nm • Tailstock Taper: MT5 • Tailstock Travel: 26.0 in / 660 mm • Tailstock Max Thrust (Acme): 3,000 lbf / 13,345 N • Tailstock Min Thrust (Acme): 200 lbf / 890 N • Turret Number of Tools: 12 Stations • Turret Index Time (one tool): 2 s • Turret Tooling: BMT75 • Live Tooling Max Speed: 4000 rpm • Live Tooling Tooling: BMT75 • Coolant Capacity: 95 gal / 360 L • Air Requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC • Full Load Amps (3 Phase) - Low: 70 A (Standard) / 105 A (XP Option) • Input AC Voltage (3 Phase) - High: 440 VAC • Full Load Amps (3 Phase) - High: 35 A (Standard) / 53 A (XP Option) • Domestic Pallet Dimensions: 217.0 in x 95.0 in x 116.0 in / 551 cm x 241 cm x 295 cm • Export Crate Dimensions: 217.0 in x 95.5 in x 120.5 in / 551 cm x 243 cm x 306 cm • Export Crate Weight: 22,141 lb / 10,043.0 kg Additional equipment • Chip conveyor • Remote jog handle / CNC control pendant • Auto-door feature • Eppinger Preci-Flex live tooling holders • Samchully 3-jaw chuck • Tool setter / touch probe Bwjdoz Nx Rcopfx Acfsw • Coolant/air blow hose Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, RMS   Vibration exciter / Vibration testing system   RMS SW 6005 Vibration exciter, sold exclusively as a source of spare parts   For sale is a used vibration exciter from RMS Regelungs- und Messtechnik.   The device is sold explicitly and solely as a source of spare parts. Its functionality has not been tested. Operational readiness or completeness is not guaranteed.   Technical data:   Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Year of manufacture: 1983   Voltage: 30 V Current: 200 A Force: 11,770 N Vibration amplitude: ± 13 mm Velocity: 1.2 m/s Acceleration: 100 g   Weight: approx. 700 kg (estimated)   Equipment:   RMS vibration exciter SW 6005 Mounting surface with threaded holes Pneumatic vibration isolation Lateral spring elements Pneumatic components Control and connection housing Cooling/air connection with hose Transport/lifting eyes Solid base frame Existing mounting and supply components Accessories as shown in the pictures   Application areas:   Spare parts sourcing Maintenance of existing vibration testing systems Spare parts and assembly supply Rebuilding and repair projects   Scope of supply:   Bedpfx Aez Iqigscfoww 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Cooling/air hose as shown in the pictures Accessories as shown in the pictures   Condition:   Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested   Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for functionality, operational readiness, or completeness.   Shipping or freight shipping possible. Subject to changes, errors, and prior sale.   We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2016, Overview This Speidel Braumeister 200 L is a compact all-in-one brewhouse: mashing, lautering and wort boiling take place in a single vessel. The unit was bought new from Speidel in 2016 and has been used exclusively for craft ales (top fermentation), with about 280 brews. It was in production until August 2026 and is now dismantled and stored in a climate-controlled warehouse. The malt pipe sits inside the kettle; the recirculation pump drives the wort through the grain bed, and the integrated lifting device raises the malt pipe for lautering. The automatic controller runs the brewing programme. Technical data - Manufacturer: Speidel - Model: Braumeister 200 L - Year of manufacture: 2016 - Nominal brew volume: 200 L - Power supply: 400 V, three-phase, 50 Hz - Power: 9.3 kW; heating 3 x 3,000 W - Dimensions: approx. 136 x 90 x 208 cm including lifting device - Weight: approx. 150 kg - Control: automatic - Utilities: no cooling water and no permanent drain connection needed in normal operation Equipment - Stainless steel lid - Malt pipe with perforated filter plates, fixing bar and clamp - Lifting device for the malt pipe - Recirculation pump - Automatic controller - Hoses, external connections, cable and three-phase plug - Printed manual; invoice, CE certificates and original documentation available Condition Used, in excellent condition: no known faults, leaks or pending repairs. Pumps, heating elements, seals and controller are original. Maintained quarterly according to the manual; routine cleaning with warm water and alkaline detergent, with caustic soda and nitric acid every five brews. The unit sits on its own frame and can be loaded without a pallet. A second, identical unit is available as a separate offer. Availability Bjdpfsz Sr Uyex Acfjww Available immediately. Location: Spain. Viewing is possible by appointment.

Condition: new, For sale: High-quality steel compensator (compensating hose / Ringwellschlauch) from the renowned brand BOA, designed for industrial applications. This component is used for: - compensation of thermal expansion - vibration and noise damping - reduction of stresses in piping systems Manufactured from stainless steel 1.4404 (INOX), it is perfectly suited for demanding operating conditions (water, gas, industrial, and process installations). ⚙️ Technical Specifications Manufacturer: BOA Nominal diameter: DN125 Length: 1500 mm Pressure rating: PN16 Material: stainless steel 1.4404 (INOX) Type: compensating hose / steel compensator Connections: flanged Construction: corrugated hose with stainless steel braid Standards: ISO 10380 / DIN 📏 Dimensions Approx. internal diameter: 125 mm Total length: approx. 1500 mm ✅ Benefits ✔ reputable manufacturer BOA ✔ excellent corrosion resistance ✔ long service life ✔ vibration and stress damping Bedpjz Smkqefx Acfjww ✔ flexible design ✔ fast installation (flanged) 📦 Scope of delivery 1x compensator DN125 (as shown in the photos)

Condition: excellent (used), Professional mobile tank for storage and distribution of diesel fuel/light heating oil from the renowned German company Rietbergwerke GmbH & Co. KG. Robust galvanized steel construction, designed for transport by forklift. The tank is equipped with a 24V electric pump from HORN GmbH and a fueling nozzle. Ideal for: • Agricultural operations • Workshops • Transport companies • Construction sites • Fuel storage for machinery and equipment Technical specifications: • Manufacturer: Rietbergwerke GmbH & Co. KG • Tank capacity: 250 L • Year of manufacture: 1993 • Hazard class: A III • Test pressure: 3 bar • HORN GmbH fuel pump • Pump power supply: 24V • Power: 132 W • Current: 5.5 A • Maximum pumping height: 6 m • Suitable for diesel fuel and light heating oil • Fueling nozzle + hoses • Protective housing • Forklift-transportable • Galvanized steel construction Condition: Used item. Shows normal signs of use according to age and operation. Visual condition and completeness as shown in the photos. Included: • 250L tank • 24V pump • Hoses • Fueling nozzle • Transport frame. Bsdpfx Aez Smz Aecfsww

Condition: excellent (used), Professional 3M Speedglas welding set with Adflo powered air-purifying respirator (PAPR) system. Used equipment, fully functional, in good technical condition. Ideal for professional MIG/MAG, TIG, and shielded metal arc welding (SMAW) applications. ⚠️ Price is for 1 set (1 SET). The set includes: 3M Speedglas auto-darkening welding helmet, 3M Adflo PAPR system, waist belt, air hose, charger, Speedglas carrying bag, battery. Condition: used equipment, normal signs of use, visible in the photos, visor darkens properly, PAPR system starts and operates, complete set as shown in the photos. Applications: Bodpfx Asz Sm Dqscfoww MIG/MAG welding, TIG welding, SMAW welding, industry, workshop, manufacturing, metalworking. Why it’s a good choice: reputable 3M Speedglas brand, very high level of comfort, respiratory protection thanks to the Adflo system, convenient carrying bag, professional, premium-class equipment. Shipping by courier or personal pickup is possible.

Condition: excellent (used), For sale is a Ponndorf PX 15 peristaltic pump equipped with a Lenze geared motor with smooth speed control. This pump is designed for the precise transfer and dosing of liquids, where the medium only comes into contact with the flexible working hose. This solution ensures the safe pumping of aggressive, viscous, and solid-containing substances. The unit is mounted on a sturdy steel base and is sold as a complete set with the geared motor. The visual condition is as shown in the photos – normal signs of use. Bwodpfxez Snbcj Acfew Technical data: Pump manufacturer: Ponndorf Handelsgesellschaft mbH Model: PX 15 Serial number: 3284 Pump type: peristaltic (hose) Geared motor manufacturer: Lenze Gearbox type: 11 712 02 10 Gear ratio: 10:1 Output speed range: 30–166 rpm Torque: 18–32 Nm Motor manufacturer: Hanning Elektro-Werke Motor power: 0.37 kW Supply voltage: 220/380 V Frequency: 50 Hz Protection class: IP54 Country of manufacture: Germany (West Germany) Application: The pump is designed for the transfer and dosing of: adhesives, paints and varnishes, resins, chemicals, detergents, syrups, sludges and sediments, lime milk, suspensions and liquids with fine solid particles. Key advantages: the medium only comes into contact with the working hose, dry running capability, self-priming, gentle pumping without damaging the medium, smooth performance adjustment thanks to the Lenze drive, robust construction made in Germany, easy operation and replacement of the working hose.

Condition: new, Seppi M. KASTOR hyd to / Stump Grinder / DEMO unit / Year of manufacture: 2023 / In stock & immediately available Price: €26,290.00 net / €31,285.10 gross - Cutting disc width: 0.11 m - Cutting disc diameter: 0.90 m - Overall width: 0.88 m - Depth: 1.80 m - Height: 1.30 m - Weight: 868 kg - Stump grinder for excavator mounting - For removing stumps and tree roots - Grinds tree stumps and roots up to 50 cm deep - For excavators from t - For mounting on various adapter plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier device - Indirect double V-belt drive with 2x5 V-belts - Hydraulically adjustable hood - Protection by double chains - Rotor with 50 fixed, carbide-tipped tools - Color: red RAL3020 · anthracite RAL7021 OPT 074 Two axial piston hydraulic motors F12-80 cm³ with overpressure valve - Displacement in cm³: 2 x 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate in l/min (min-max): 140 – 220 An autonomous hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and adapter plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse that are immediately available! Please contact us for this at . Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Bsdjznru Tjpfx Acfjww We supply the complete Seppi M. range for you! Errors and prior sale reserved! = Further information = Unladen weight: 868 kg Please contact Marius Herden for more information.

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, inverter welding machine -Manufacturer: Ess, MIG/MAG gas-shielded welding machine Bjdpfxozrt E Uo Acfsww -Type: E1-3300 -Max. welding current: 330 A -Features: Water-cooled, remote control -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg

Condition: new, power: 316 kW (429.64 HP), first registration: 07/2023, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 290 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, loading space volume: 20 m³, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - PTO = Notes = Fuel tank: 290 liters Air conditioning Equipped with a Ravasini fuel tank with a capacity of 20,000 liters. Three compartments (6,800 l + 6,500 l + 6,800 l + expansion volume) Manhole with cover, 500 mm diameter, complete with inlet and breathing valve, and including a collection basin in case of liquid spillage from the manhole. Pumping unit housed in a suitable stainless steel box, positioned on the rear side of the vehicle. Positive displacement pump, 500 l/min. Liter counter with a flow rate of 550 l/min, complete with filter, degasser, check valve, with a positive displacement head providing partial measurement with 5 resettable digits and total measurement with 7 non-resettable digits. Manually operated hose reel with 20 m of 1.5-inch hose and delivery gun. = Further Information = General Information Year of construction: 2023 Bwjdpfx Acjzn U Hxjfsw Technical Information Number of cylinders: 6 Engine displacement: 12,882 cc Transmission Transmission: ZF16TX2240TO, automatic Axle Configuration Tire size: 315/80R22.5 Suspension: Leaf spring suspension Front axle: Steerable Weights Unladen weight: 13,400 kg Payload: 20,100 kg GVWR: 33,500 kg Functional Body manufacturer: Ravasini Number of compartments: 3 Pump: Yes Hoses: Yes

Condition: used, mileage: 1,07,492 km, power: 265 kW (360.30 HP), first registration: 03/2007, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2028, color: silver, gearing type: mechanical, emission class: euro4, loading space volume: 7 m³, Year of construction: 2007, Equipment: ABS, air conditioning, l/min at 10 bar * High-pressure hose boom: DN32 * Cassette boom: DN25/32 * High-pressure hose reel: DN32 Bwodpfx Aszpcxxecfew * Rotor connection: DN32 * Hose swivel * Hand spray gun SP200 * Overflow valve RV3 * Oil/air cooler * Winch * Hose coiler * MPA valve manifolds * Compressed air maintenance unit Inspection possible by prior appointment. Further information, photos and videos are available upon request. Subject to errors, changes and prior sale.

Condition: excellent (used), Year of construction: 2020, Pallmann PS-H 600/900 plastic shredding line. Mill chamber dimensions 600x900mm, power 75/90kW. Very good condition. Line components: 1. Conveyor, Keiper product Drive power 1.1 kW Belt working width 600 mm Center distance 5500 mm 2. Surface metal detector, type FS 650, manufacturer Sesotec Detection width 640 mm Detection sensitivity for FE ball at detection height of 20 mm: 2.5 mm Detection sensitivity for FE nut at detection height of 100 mm: M6 3. Cutting mill, PS-H 600x900 F3/SD5, PALLMANN product 4. Volumetric feeder, type RVR 10, WAM product Drive power 0.75 kW 5. Screw conveyor, type TME219/0440, WAM product Drive power 2.2 kW 6. Sifter, type R25, Waltinger manufacturer Drive power 1.5 kW 7. Fan, type MXE063-008030-00, Reitz product Flow rate: 80 m3/min Total pressure increase 630 daPa Drive power 15 kW Rotational speed 3,000 rpm 8. Filter, type PA 7x8-2500, Tama product Residual dust content: < 20 mg/m3 Filter area 54 m2 Exhaust air 4800 m3/h 9. Filter, type PA 6x5-2000 CCD, Tama product Residual dust content: < 20 mg/m3 Filter area 23 m2 Exhaust air 2100 m3/h 10. Fan, type MXE031-003530-00, Reitz product Flow rate: 35 m3/min Total pressure increase 315 daPa Drive power 3 kW Bwjdpfx Acjzxup Ijfew Rotational speed 3,000 rpm 11. Metal separator, type Rapid Vario FS 100, Sesotec product Removal duration (adjustable) 0.5-29 s Compressed air connection (hose) 6/8 mm Working pressure 5-8 bar 12. Screw conveyor, type TMS219/0540, WAM product Drive power 2.2 kW

Condition: reconditioned (used), Year of construction: 2020, operating hours: 1,178 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 72 l, HAKO SCRUBMASTER B70 CL TB650 SCRUBBER NEW 6V 175Ah SIAP GEL BATTERIES (4x) Manufactured in 2020 with 1178 hours of operation 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for use on any surface. New polyurethane squeegee rubbers, resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. The device is equipped with a new, durable drain hose and a new suction hose. The new suction turbine ensures high water suction power from the squeegee. Bedpezxdikjfx Acfoww Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage (V): 24 Brush working width (mm): 650 Suction nozzle working width (mm): 950 Theoretical capacity (m²): 3200 Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW 6V 175Ah SIAP GEL BATTERIES (x4) NEW disc brushes 330mm PPL 0.5 (2x) NEW 24V 600W suction turbine NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liter Tenzi Normal fluid - FREE KEY FEATURES: The 72-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (650mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: new, power: 235.36 kW (320.00 HP), fuel type: diesel, axle configuration: 4x4, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our range of new vehicles, we offer you: TLF 4000 all-wheel drive with 5,000 liters of water on an off-road MAN TGM 18.320 all-wheel drive chassis. Our "Water Buffalo" on a MAN chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 hp (235 kW) • Automated transmission • Off-road tires • Matching single tires for high off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) Bjdszmyy Uspfx Acfeww • Air conditioning and auxiliary heater • Standard 4 PA mountings in the crew compartment Superstructure: • High-quality superstructure in a frame construction made of rust- and corrosion-free material • Fold-out steps for each side equipment compartment • Individually customized equipment storage made of stainless steel according to your wishes • Walkable, non-slip vehicle roof Vehicle pump/fire extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP&ROLL capable • Performance 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, continuously adjustable foam mixing system • Water tank 5,000 l with integrated foam tank 500 l • Auxiliary heater in the pump compartment Firefighting equipment: • High-pressure quick-attack system with 50 m kink-resistant hose • Foam/water monitor 2,000 l/min on the vehicle roof • Self-protection system with 4 extinguishing nozzles in front of the tires Safety and lighting: • LED light bar on the vehicle roof/2 LED front warning lights • Pneumatic special signal system Martin horn • Public address system 100 W with intercom unit • Reversing camera • Comprehensive LED lighting in the crew and all equipment compartments • LED ambient lighting on the superstructure and additional spotlights • Pneumatic LED light mast with remote control • Hygiene board on request We would be happy to provide you with a specific offer and show you the vehicle in detail at our location in Berlin. All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, maximum load weight: 6,800 kg, overall weight: 9,900 kg, axle configuration: 1 axle, first registration: 10/2026, Year of construction: 2026, Müller-Mitteltal KWH 9,9 ML Cable Transport Trailer with Diesel Engine * KWH 9,9 ML * Drum brake braking system EBS 2S/2M * BPW axles * Leaf spring suspension, parabolic spring * Spring-supported square tube supports at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm or 50 mm screw-on drawbar eye (height-adjustable, in mm) * Bracket for additional drawbar, mounted on the side of the drawbar, on the right side in the direction of travel * Chassis made of torsionally rigid square tubes and cross members * Plastic toolbox * LED lighting * Swiveling cable drum assembly consisting of a base frame, bearings, and drum support arms * Support arm ends with clamping device for securing the drum shaft * Locking of the swiveling cable drum assembly to the chassis via a centrally located claw lock * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * With a drum diameter of 3,000 mm, a maximum drum width of 1,650 mm is possible * Motor-hydraulic pull and push cylinders with load-holding valve * Control valve with automatic zero position and pressure relief valve * Connectors, hoses, and pipes of the hydraulic system in NW 13 * Required oil consumption approx. 10 liters * Drum drive, motor-hydraulic, with oil motor, valves, and rubber-coated drive rollers (adjustable). Hydraulic speed regulator and brake for drum drive * Hydraulic pump unit with diesel engine and manual starter, 6.5 HP with gear pump (150 bar) * Pressure supply by switching the connection lines, either via truck hydraulics or the pump unit * Cover as weather protection, hot-dip galvanized without topcoat Bjdpoy R Ipnefx Acfsww * Tires 315/80 R22.5 Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) Bwsdpfxozgckcj Acfsw (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, BIO-CIRCLE Type: RWR 80L Auto KST Description: RWR 80 L KST Fully Automatic PLC Parts Washing System The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without disassembly. The unit is space-saving, quiet, and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz plug 16A CEE 5p 6h Drain: 1 1/4“ outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Complete components (without disassembly) Quality seal: Stainless steel, service package available Maximum filling volume: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 KG Application area: The RWR 80 L KST Fully Automatic PLC has been developed for the plastics injection molding field and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system will begin to heat up. During the heating period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically Bwsdpfxozgclme Acfjw after the instructions displayed on the display have been confirmed. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2027, loading space volume: 30 m³, total length: 8,790 mm, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2024, Equipment: ABS, KÄSSBOHRER V2A slurry tank semi-trailer, 30,000 liters - Type STN 30L/1 - 12/27 First registration 02/2024, German registration and from first owner Mileage only 32,771 km V2A stainless steel tank Diameter 2,200 mm 3 baffle plates 1 filling dome DN500 with hinged cover Rinsing line 4 inches through the entire tank Rotary lobe pump VOGELSANG VX 186-260 Q GL, 6,000 liters/min., interchangeable housing shells Complete piping in V2A stainless steel Rotating outlet at the rear in 6", with emptying device 8" suction port at the rear top 6x LED work lights Large hose trays on the left and right BPW axles with disc brakes WABCO Trailer-EBS with RSS stability program WABCO Optiturn - OptiTurn automatically detects when a vehicle enters a curve and then loads or unloads or lifts the third trailer axle. This improves the maneuverability of the trailer in confined spaces, as the turning circle becomes smaller and tighter curves can be taken. Furthermore, it improves the turning ability when reversing. 1st axle: LIFT AXLE Tires: 6x 385 /65 R 22.5 RENTING is the new BUYING; with us, full-service rental is available IMMEDIATELY. Bodpjz Am Evjfx Acfeww

Condition: excellent (used), ALKO Power Unit 250 P – used – clean air extraction unit Air filtration using filter hoses, pneumatic cleaning, Bwedpfx Acozzn Iiofsw movable collection container, automatic fire extinguishing system ----- Technical data ----- Extraction nozzle diameter: 250 mm, Nominal volume flow: 3,534 m³/h, Number of bags: 2, Motor: 7.5 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,420 x 1,000 x 2,360 mm, Weight: 758 kg Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, machine/vehicle number: WFDFLT33903000213, empty load weight: 7,287 kg, maximum load weight: 27,713 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 13,550 mm, loading space width: 2,470 mm, loading space height: 2,793 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R22,5", color: green, Please note: archive images! Vehicle may currently be in use! #Chassis – haulage semi-trailer - Fine-grain steel welded construction, lightweight design up to the landing legs - Fifth-wheel plate with replaceable 2" kingpin - Preparation for lashing eyes in the floor at the sides - 24 t 2-speed landing gear, one-side operation, with straight lower section - Pull-out ladder at rear - Side-mounted door stays - Wheel chocks with holder - Aluminium side underrun protection - Steel rear underrun protection with wide Fliegl mudflaps - Quarter-shell mudguards - Rear ram protection (corner protection) - Aluminium ladder 3300 mm, with side-mounted holder - Tarpaulin pole with holder - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm #Axles + suspension - SAF disc brake axles with 430 mm disc diameter, air suspension - 1st axle: automatic lift axle incl. forced lowering and traction help, actuation "3x braking" #Braking system - Dual-line air brake system, spring brake parking brake - 2 non-interchangeable coupling heads at front - EBS (electronic braking system) with EBS socket at front - Raise & lower valve - Vehicle stability system #Wheels and tyres - 385/55 R22.5", make at manufacturer's choice - Steel rims, factory silver #Electrics - 24 Volt, multi-chamber lamps Bsdpfx Ajz Ti A Docfeww - Yellow LED side lighting - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin non-interchangeable sockets at front #Moving floor – hydraulics - Hydraulic cylinders with sliding mechanism installed in the floor - Dual-circuit hydraulics - Forward/reverse switching and on/off electrically via radio remote control - Drive system make Keith Runningfloor - Moving floor power supply via sidelights - Hydraulic operation via truck PTO - Hydraulic connection with hose at front wall and screw-type plug of high-pressure rotary coupling NB = 48 mm - Note: dual-circuit hydraulic system required! - Recommended pump output: max. 223 ltr/min (180 ltr/min recommended) - Pressure: max. 210 bar - Oil tank capacity: min. 200 ltr #Moving floor – floor - Moving floor with rear wear plate, Running Floor - Aluminium floor slats, 6 mm floor profile, ribbed design - Prepared for retrofitting a floor protection sheet #Moving floor – body - Aluminium box body made of high-quality, abrasion-resistant material - Front and side walls of aluminium hollow profiles, welded all round at the top to a wide special aluminium reinforcement profile, welded into a special frame at the bottom - Moving inner bulkhead (travels with the floor) for better unloading - Reinforced tarpaulin flaps at bottom - Hydraulic rear wall with large upward opening, robust design, with radio remote control, operable only with roof open - Standing platform with ladder access on both sides (left/right in direction of travel) and railing, for opening and closing the roll-up roof tarpaulin - Removable, swivelling cross bows for tarpaulin support + tarpaulin support at front on front wall and at rear on rear wall - Hydraulic roof with tarpaulin, operable via radio remote control #Registration / plates - Germany - With Dekra inspection and expert report Please note: archive images!

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, pressure: 180 bar, empty load weight: 126 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 8/18-4C HOT-WATER PRESSURE WASHER Year of manufacture: 2023 The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 800 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 ~3-phase Flow rate [l/h]: 800 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 98–155 Connected load [kW]: 6 Cleaning agent tank [l]: 15 Hose length [m]: 10 Weight [kg]: 126 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Bwedpfx Acez Tqwpofjw Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components makes the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal piping.

Condition: used, functionality: fully functional, machine/vehicle number: WSK00000001260445, empty load weight: 5,820 kg, maximum load weight: 26,680 kg, overall weight: 32,500 kg, axle configuration: 2 axles, permissible axle load (axle 1): 18,000 kg, permissible axle load (axle 2): 18,000 kg, first registration: 08/2011, loading space volume: 25 m³, total length: 8,640 mm, total width: 2,550 mm, total height: 3,570 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, Attention: archive images! The vehicle may currently be in use! #Chassis tipper semi-trailer - Fine-grain steel welded construction - 2 drop-leg landing legs with round feet - 2 wheel chocks with holder - Rear underrun protection, folding - Half-shell mudguards on all axles - Anti-spray mudflaps on last axle only - 1 aluminium hook-on ladder with holder, at the side - 1 shovel #Axles + suspension - Disc brake axles - Air suspension #Braking system - 2 non-interchangeable coupling heads at front, without connecting line #Wheels and tyres - 385/65 R22.5", make at manufacturer's discretion - Steel rims, make at manufacturer's discretion #Electrics - Multi-chamber lights, amber LED side lighting - 2 white/red outline marker lights at rear - 2 x 7-pin sockets at front, without connecting cable - 2 additional LED work lights at rear #Hydraulics Bodpfx Acoz Tzqysfeww - High-pressure cylinder - Hydraulic operation via truck PTO - Hydraulic connection with hose #Bodies - Steel half-pipe body, inclined front wall with hydraulic cylinder mount, internal access steps on the right in direction of travel - Rear wall as pendulum tailgate - Cramaro sliding cover "Cabriole", automatic rear closure as folding bow. Cover structure begins ahead of the body opening. Cover with electric drive, tractor unit socket supplied loose, operation on the semi-trailer and by radio remote control. Note! Outer width of 2550 mm is exceeded by cover attachments. This is accepted in most EU countries! Observe the registration regulations of the respective country #Paintwork - Frame: grey - Landing legs: black coated - Body: yellow with lettering - Cramaro cover: yellow

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 516209, Year of construction: 2013, operating hours: 11,035 h, load capacity: 1,400 kg, lifting height: 4,930 mm, free lift: 1,350 mm, load center: 500 mm, fuel type: electric, mast type: triplex, gearing type: automatic, battery capacity: 620 Ah, battery voltage: 48 V, battery weight: 580 kg, fork length: 1,200 mm, tire condition: 80 %, front tire type: superelastic tires (non-marking), rear tire type: superelastic tires (non-marking), overall weight: 3,039 kg, total height: 2,160 mm, total length: 2,683 mm, total width: 1,099 mm, color: orange, Equipment: 3rd hydraulic function, 4th hydraulic function, UVV, head guard, lighting, pallet forks, sideshift, Fully operational STILL forklift truck Bsdpfxez T S A Hs Acfeww Ex-rental unit New hydraulic hoses Price quoted ex warehouse, plus 19% VAT For sale to commercial businesses only!

Condition: ready for operation (used), Year of construction: 2022, operating hours: 347 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 520 mm, spindle motor power: 22,000 W, overall weight: 4,600 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details. - Operating Hours: 521 hours- Spindle Running Time: 347 hours- Control Unit: OSP-P300LA-e / OSP P300L-R-TD Kit- Main Spindle Motor Power: 22 kW- Main Spindle Speed: 3,800 rpm- Chuck: 10" Hollow clamping chuck (250 mm) Type N210A8- Spindle Bore: 80 mm- Spindle Nose: A8- Turning Diameter (VDI Turret): 300 mm- Max. Turning Length (VDI Turret): 450 mm- X-Axis Travel: 235 mm- Z-Axis Travel: 520 mm- C-Axis Range: 360° (0.001° resolution)- Rapid Feedrate (X / Z): 25,000 / 30,000 mm/min- Tool Turret: V12 Radial Turret with driven tool stations (VDI40)- Turret Stations: 12 (all 12 can be driven)- Driven Tools Power / Torque / Speed: 7 kW / 23.7 Nm / 4,500 rpm- Tailstock: NC Tailstock (MT5 taper, 5.0 kN thrust force)- Supply Voltage: 400 V- Phase: 3 P- Frequency: 50/60 Hz- Rated Capacity: 28.6 kVA- Full Load Current: 41.2 A- Largest Motor Rating: 96 A- Short Circuit Ratings: 2.5 kA- Machine Dimensions (without chip conveyor): 2,545 mm x 1,870 mm x 2,057 mm- Optional Equipment & Components: * V12 radial turret for milling function * Chip conveyor with side discharge * Grundfos high-pressure pump (0.8 kW) * Touch Setter M (Tool presetter) * Tool carrier VDI40 * Real 3D graphics simulation & One Touch IGF dialog programming * 1 set of soft jaws & 1 set of hard jaws * 3 pcs. Boring bar holders * 3 pcs. External turning holders * 2 pcs. Face turning holders * 8 pcs. Reduction sleeves (2x 16, 20, 25, 32 mm) * 1 pc. Reduction sleeve MK02 * Parts catcher (max. material dim. D51mm x 150mm, max. weight 2.3kg) * Bar feeder interface * Grippex bar gripper (40mm shank diameter, gripping range 3-60mm) * Hand wash gun set (incl. pump, spiral hose, switch) * Transformer Technical Specification Bsdo Aa Aufspfx Acfsww Counter Spindle No Driven Tools Yes