Used Hose for sale (2,392)

Condition: used, Year of construction: 2002, Offered is a vacuum tube lifter with pillar-mounted jib crane. Maximum load capacity: 85kg. Weight of the lifting unit: 63.5kg. Equipped with a vacuum lifting unit, ergonomic control unit with handle, vacuum gripper, vacuum supply hose, side channel blower with filter, as well as a pillar-mounted jib crane with jib arm and movable suspension. Inspection possible by arrangement. Bedpfx Aj Afpl Uogxoww

Year of construction: 2017, condition: used, 6x Cloos Qineo Tronic 450 MIG/MAG welding machines, 1x Cloos GLC 451-C welding machine and 1x Cloos GLC 553/MC3 welding machine are available, 1) 6x Cloos Qineo Tronic 450 MIG/MAG welding machines, welding current: 40-450A, welding current at 60% duty cycle: 450A/36.5V, welding current at 100% duty cycle: 350A/31.5V, open-circuit voltage: 77-98V, mains voltage: 380-480V/50Hz/3-phase, power cable: 4x6mm², mains fuse protection: 400V/32A, protection rating: IP23, insulation class: F, cooling method: F, dimensions (without wire feeder): 1011x517x703mm, weight (without wire feeder): 88kg, year of manufacture: 5x2017, 1x2016, 2) 1x Cloos GLC 451-C welding machine, year of manufacture: 2003, 3) 1x Cloos GLC 553/MC3 welding machine, year of manufacture: 2008, additionally, 21 welding torches with long torch necks, 12x500mm, 4x600mm, 5x1500mm, and 53 FKS400 Autogen Ritter welding torch hose assemblies are included, an on-site inspection is possible. Bjdpfe Afzadex Agxsww

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,420 h, load capacity: 5,000 kg, lifting height: 4,040 mm, free lift: 1,975 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 8.25 R15, rear tire type: pneumatic tires (air-filled), rear tire size: 8.25 R15, overall weight: 14,500 kg, empty load weight: 9,500 kg, total height: 2,650 mm, total length: 4,650 mm, total width: 2,100 mm, color: yellow, Equipment: CE marking, cabin, centralized greasing system, fork extension, hydraulic fork positioner, lighting, pallet forks, # COMBILIFT C5000FSL | DIESEL | DUPLEX 4040 MM | FREE LIFT | FORK POSITIONER | FULL HEATED CAB 🚜 🔧 FULLY SERVICED | 🛞 NEW TIRES | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a reliable and powerful sideloader for handling long and heavy materials, this COMBILIFT C5000FSL is an excellent solution for demanding industrial applications. Manufactured in 2018, the machine features a reliable Deutz diesel engine, Duplex mast with 4040 mm lift height, 1975 mm free lift, hydraulic fork positioner and full heated cabin. Before delivery, the forklift undergoes comprehensive inspection, servicing and operational testing. It is also equipped with 100% brand-new pneumatic tires. 🛞✅ ## ⭐ KEY ADVANTAGES * 💪 5000 kg load capacity * ⚙️ Deutz diesel engine * 📏 Duplex mast – 4040 mm * ↕️ 1975 mm free lift * ↔️ Hydraulic fork positioner * 🔥 Full heated cabin * 🛞 100% brand-new pneumatic tires * 📦 1200 mm platform * 🍴 1200 mm forks * 🔧 Fully serviced and tested * 🛡️ Warranty available * 🎥 Live online demonstration * 🚛 Direct delivery * 🌍 Worldwide transport ## 📋 TECHNICAL SPECIFICATIONS Manufacturer: COMBILIFT Model: C5000FSL Type: Sideloader Forklift Year: 2018 Serial Number: 38028 Capacity: 5000 kg Operating Hours: 6420 h Engine: Deutz Diesel Mast: Duplex Lift Height: 4040 mm Free Lift: 1975 mm Fork Positioner: Hydraulic Positioner Width: 1350 mm Forks: 1200 mm | 120 x 50 mm Cab: Full Heated Operator Cab Bwjdo Agk A Aepfx Agxow Service Weight: approx. 9500 kg ## 📐 DIMENSIONS Overall Height: 2650 mm Lowered Mast Height: 3000 mm Length: 4650 mm Width: 2100 mm Platform: 1200 mm ## 🛞 TIRES Front: Pneumatic 8.25 R15 – 100% NEW Rear: Pneumatic 8.25 R15 – 100% NEW ## ⚙️ EQUIPMENT * Hydraulic fork positioner * Duplex mast with free lift * Full heated operator cabin * Deutz diesel engine * Working lights * Brand-new pneumatic tires * 1200 mm forks and load platform ## 🔧 PROFESSIONAL PRE-DELIVERY PREPARATION Before delivery, the forklift undergoes comprehensive technical inspection and servicing, including: * Engine and drivetrain * Hydraulic system, hoses and connections * Mast, chains and lifting components * Steering and braking systems * Forks and fork positioner * Tires and wheels * Electrical and safety systems * Working lights * Oils, filters and operating fluids The machine is operationally tested and prepared for immediate use at the customer's facility. ✅ ## 🏭 IDEAL FOR 🪵 Timber & sawmills 🔩 Steel mills & service centres 🏗️ Structural steel ⚙️ Metal & aluminium processing 🔧 Pipes and profiles 📏 Long steel sections 📦 Long and bulky loads 🏭 Manufacturing facilities The sideloader design makes the C5000FSL particularly suitable for transporting long materials while maintaining excellent manoeuvrability. ## 🏆 WHY FT LOGISTICS? We specialise in COMBILIFT multidirectional forklifts and sideloaders. Every used machine undergoes professional inspection, servicing and operational testing before delivery. ## 🤝 WE PROVIDE 🔧 Professional pre-delivery service 🛡️ Warranty options 👨‍🔧 Technical support 💶 Leasing & financing 🚛 Worldwide transport 📄 Export & customs documentation 🎥 Live online demonstration 📸 Additional photos & videos # FT LOGISTICS 🚜🌍 We deliver machines that are ready to work. ✅

Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Special Feature: Machine with a gluing height of up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Features and Technical Specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cutable edges) - Three pressure rollers - Belt feed: - 0.25 kW - Approx. 1,250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with a thick, workpiece-protective rubber covering - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue tank with glue supply from below and fast heat-up time after machine shutdown - Flush trimming unit: - for the front and rear edges of the workpiece - Automatic sensing of the workpiece - Pneumatic trimming with a blade for cut-ready edges - Flush milling unit - With vertical sensing and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Milling cutter: 70 mm, Z4, radius 2 mm/15° - Central exhaust port: 100 mm - 2 chip extraction hoods with 60 mm hose - Automatic height adjustment of the upper router bit via the belt feed - Continuous workpiece support, approx. 1,800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable film plate: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10–100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4–2.0 mm - Roller cutting: max. 1.0 × 55 mm, 2 × 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm Bjdpfx Agjzk Nmrexeww - Electrical connection: 400 V, 50 Hz, 3-phase N - Total power consumption: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg

Condition: like new (used), Year of construction: 2009, functionality: fully functional, ASCO APM 40 Automatic Dry Ice Block & Slice Wrapping Machine. Bwjdpfx Agezxggljxjw For sale: a used ASCO APM 40 automatic wrapping machine, specifically designed for wrapping dry ice blocks and slices. The machine is in fully functional condition. Product-contact parts are made of stainless steel. It features automatic conveyor pitch adjustment, torque-controlled motors, and electronically controlled sealing temperature, displayed on the screen. The control panel includes visual alarms and a self-diagnostic function. Technical specifications: - Manufacturer: ASCO - Model: APM 40 - Year of manufacture: 2009 - Condition: Used, fully functional - Working speed: Up to 25 wraps per minute - Film speed: Up to 25 meters per minute - Maximum wrapping width: 250 mm - Maximum wrapping height: 60 mm - Wrapping lengths: 40–260 mm, 140–580 mm, or 200–800 mm - Compressed air: 4–5 bar - Standard version: Right-hand operation - Location: Noordwijkerhout, Netherlands Suitable for dry ice producers and suppliers who want to automatically wrap dry ice blocks or slices. Contact us for more information. ASCO APM 40, ASCO APM40, ASCO automatic wrapping machine, ASCO dry ice wrapping machine, dry ice block wrapping machine, dry ice slice wrapping machine, dry ice disc wrapping machine, dry ice packaging machine, dry ice block packaging machine, dry ice slice packaging machine, automatic dry ice wrapper, dry ice block wrapper, dry ice slice wrapper, dry ice packaging equipment, dry ice wrapping equipment, dry ice film wrapping machine, dry ice block packer, dry ice packaging line, industrial dry ice packaging machine, used dry ice wrapping machine, used ASCO wrapping machine, dry ice CO2 block wrapping machine. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: GH4200BD, operating pressure: 290 bar, total length: 1,200 mm, high-pressure hose length: 15,000 mm, total height: 1,250 mm, total width: 1,000 mm, pressure: 290 bar, empty load weight: 120 kg, fuel: super 95, overall weight: 125 kg, warranty duration: 24 months, fuel tank capacity: 6 l, temperature: 150 °C, The GH4200BD hot water pressure washer combines extreme power with the efficiency of hot water cleaning. Designed for demanding tasks where cold water isn’t enough, this professional machine is powered by a robust Briggs & Stratton Vanguard engine and diesel water heating system. It easily removes the toughest dirt, grease, and oil residues, making it ideal for industry, construction, agriculture, and vehicle or machinery maintenance. Key Features Max. pressure: 4200 PSI / 290 bar Max. water flow: 18 l/min Engine: Briggs & Stratton Vanguard, 408 cm³, horizontal OHV This hot water high-pressure cleaner is widely used in environments where conventional cold-water washers fall short Package Includes GH4200BD hot water petrol pressure washer Short high-pressure spray gun 15 m high-pressure hot water rubber hose with QC 3/8 Stainless steel lance extension Nozzle set: 0°, 15°, 25°, 40°, detergent nozzle /029 Waspper oil Bwsdpfx Agj Aaxzzjxew Detergent suction hose User manual

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: GF120, operating pressure: 220 bar, total length: 1,000 mm, high-pressure hose length: 10,000 mm, total height: 1,400 mm, total width: 700 mm, pressure: 220 bar, empty load weight: 40 kg, fuel: super 95, overall weight: 45 kg, water tank capacity: 120 l, warranty duration: 24 months, fuel tank capacity: 4 l, Petrol high-pressure washer Gaspper GF120 with 120l tank is made for the toughest dirt. With the Gaspper GF120 pressure washer, the cleaning process is very simple and pleasant, even in the case of larger surfaces. Key Features Petrol Engine: Peggas AP170F, 4-stroke, OHV Power: 5.2 HP / 3.9 kW Water pressure: 220 bar / 3.200 PSI Flow rate: 2.91 GPM / 11 l/m Specific Features: Free electricity cords for prevention of short circuits in wet surroundings You can take it anywhere thanks to a gas-powered system 10 meters high-pressure rubber hose 0°, 15°, 25°, 40°, and saponite nozzle for various uses Robust and lightweight steel construction for easy handling Bwjdpj Aayxnsfx Agxew Big wheels and high chassis so it can be moved easily even in rough terrain areas High-pressure ergonomic gun with high-quality stainless steel lance Quality Peggas petrol engine with speed control for longer life Aluminum pump with brass head, ceramic pistons, and water pressure control Wide range of accessories Customer service, warranty, and post-warranty service

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: GP5000HC, operating pressure: 350 bar, total length: 1,300 mm, high-pressure hose length: 15,000 mm, total height: 800 mm, total width: 800 mm, pressure: 350 bar, empty load weight: 125 kg, fuel: super 95, overall weight: 130 kg, warranty duration: 24 months, fuel tank capacity: 6 l, Built to tackle demanding cleaning tasks across industries, the Gaspper GP5000HC high-pressure washer is a true workhorse. This powerful machine is a perfect fit for construction sites, agricultural operations, and automotive detailing. But its capabilities extend far beyond – technical service providers, municipal authorities, and construction equipment rental companies all benefit from its heavy-duty cleaning power. Key Features: Petrol Engine: Honda GX630, 4-stroke, OHV Bjdpfxs Aayyrs Agxoww Power: 20.8 HP / 15.5 kW Water pressure: 350 bar/5.000 PSI Flow rate: 5.81 GPM / 22 l/min Package contents: High-pressure washer Pressure gun High-pressure rubber Hose 15m with QC 3/8 Stainless Steel Extension Lance Nozzle 0 ̊ Nozzle 15 ̊ Nozzle 25 ̊ Nozzle 40 ̊ Soap nozzle Waspper engine oil Detergent tube Operation manual Wheel assembly set

Condition: new, power: 316 kW (429.64 HP), first registration: 05/2025, fuel type: diesel, tire size: 14.00R20, axle configuration: 4x4, wheelbase: 45,000 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, total length: 7,650 mm, total width: 2,500 mm, total height: 3,480 mm, loading space volume: 11 m³, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - Windshield - Power Take-Off (PTO) = Further Information = General Information Year of Construction: 2025 Technical Information Number of Cylinders: 6 Engine Displacement: 12,882 cc Transmission Gearbox: ZF16TX2240TO, Automatic Axle Configuration Tire Size: 14.00R20 Brakes: Drum brakes Suspension: Leaf spring suspension Front Axle: Steerable Bwodpfx Aezq D Tysgxsw Weights Unladen Weight: 10,400 kg Payload: 9,600 kg GVW: 20,000 kg Functional Body Brand: Ravasini Number of Chambers: 1 Pump: Yes Hoses: Yes

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, empty load weight: 49 kg, input voltage: 230 V, fuel: electricity, warranty duration: 6 months, KARCHER HD 6/16-4M COLD WATER PRESSURE WASHER This device features new accessories, including a pressure gun, stainless steel lance, steel braided hose, and adjustable nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient single-phase motor ensures stable operation even during prolonged use. With operating parameters of 160 bar and 600 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Model: HD 6/16-4M Power supply voltage [V]: 230 Discharge capacity [l/h]: 600 Bsdpfx Aoy S S Nzjgxjww Operating pressure [bar]: 160 Connection power [kW]: 3.4 Weight [kg]: 49 Dimensions [mm]: 467 x 407 x 1010 Hose [m]: 10 EQUIPMENT: NEW durable pressure gun NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, functionality: fully functional, machine/vehicle number: 36518, mileage: 44,900 km, power: 175 kW (237.93 HP), first registration: 02/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 3,560 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, traction control, truck registration, The mileage of the offered vehicles may vary as some vehicles are currently in rental use! Additional similar vehicles available upon request. Right-hand drive, 6-cylinder OM 936 engine, ABS, ASR, ESP, disc brakes, engine brake, reinforced frame, front axle 5.3 t, rear axle 11 t, air suspension with differential lock, lane assist, Active Brake Assist, hill start assist, underrun protection, reversing warning tone, daytime running lights, rain sensor, light sensor, plastic toolbox, tank capacity: 125 l, AdBlue 8l. Bodpfey Rnk Sex Agxsww Cab with 2 seats: driver comfort seat, fixed passenger seat, roof hatch, air conditioning, pollen filter, electric windows, electrically adjustable and heated mirrors, radio-CD with Bluetooth, speed limiter, central locking with remote, immobilizer with transponder, cruise control, digital tachograph, sun visor, reversing camera. Hydraulically driven turbine, steplessly adjustable, tank made entirely of stainless steel, additional manual pump for lifting the container, weight display, operating hours counter, sweeping hours counter and water indicator (remaining volume 300 l), automatic water supply cut-off when lifting the sweeping units and when reverse gear is engaged, acoustic signal in the cab when container is raised, 2 LED beacons + 2 LED work lights, sound insulation in equipment compartment, left/right sweeper unit, dual-sided intake, dual sweeping system, sweeping working width: 2300 mm / with dual sweeping system: 3940 mm, trailing disc brushes with steel bristles, diameter 700 mm, adjustable disc brush tilt (joystick right and left), roller brush with mixed polypropylene and steel wire bristles L=1500 mm, diameter 400 mm, disc brush spray nozzles, continuous front spray bar with 6 nozzles, 3 nozzles per disc brush, 6 nozzles in suction mouth, 5 nozzles on sweeping roller, wild weed brush type 'C' mounted on right, water system for cleaning upper suction shaft with external water connection, stainless steel leaf grid, area approx. 2 m², pneumatic lifting/lowering with vibration mechanism, turbine wheel made from 8 mm Hardox 700, housing dome made from integrated Hardox AISI 316, filling via hose with check valve, Wilden water pump, P1, diaphragm pump, dry-run safe, leaf suction system at rear, reversing camera with monitor in cab, PM 10, broom and shovel holder, cable remote control.

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 45129, FISA Ultrasonic Mold Cleaning System 3 VST 1200/P-INSON+Z1, Year of Construction 2016 Manufacturer: FISA Ultraschall GmbH / FISA Manufacturing Srl Type: Special 3 VST 1200/P-INSON+Z1 Year of Construction: 2016 Serial Number: 45129 Internal dimensions of the tanks: approx. 1,600 × 600 × 1,250 mm Maximum mold weight: 2,200 kg Description Offered is an industrial FISA ultrasonic cleaning system for cleaning and maintaining large injection molds, die-casting molds, and other molds, as well as heavy components. Bwjdpfx Aszx Eftsgxow The system consists of three stations arranged one behind the other for ultrasonic cleaning, cold rinsing, drying, and preservation. The design is intended for workpieces or molds with a weight of up to 2,200 kg. The VST 1200 cleaning station is designed as a noise-insulated INSON version. It features a pneumatically operated hinged cover, automatic water supply, safety float switch, vapor extraction with fans, and an adjustable timer. The ultrasonic generation is provided by two FISA USM 28/R generators and four MAGNASONIC transducers FB 550 PLAN. A cold rinsing station VST 1200 and a drying and preservation station VST 1200/P with Option D are connected to the cleaning station. The preservation station also has a pneumatically operated hinged cover, a vapor extraction system, and a sight glass for liquid level control. Above the preservation tank, there is a drip and blow-off station with side doors, a splash guard, an extraction system, and a flexible hose for blowing out the cleaned molds. Scope of supply - Cleaning station VST 1200 - Cold rinsing station VST 1200 - Drying and preservation station VST 1200/P - Two ultrasonic generators USM 28/R - Four MAGNASONIC transducers FB 550 PLAN - Pneumatically operated hinged covers - Vapor extraction system including fans - Drip and blow-off station - Stainless steel drip tray under the entire system - Two special mold support bars for a total load of 2.2 tons - Immersion rack VST 350 INOX with two inserts - Optical alarm indicator - Remaining runtime display - Weekly timer - Walkway with stairs and safety railing - Control cabinet and operating unit - Existing technical documentation Technical data - Usable internal dimensions: approx. 1,600 × 600 × 1,250 mm - Maximum workpiece load: 2,200 kg - Number of process stations: three - Sound power level according to the measurement report: 78 dB(A) - Design: Stainless steel - CE declaration of conformity available - Initial acceptance and instruction in 2016 documented - Drip tray: approx. 6,500 × 1,800 mm - Installation area including walkway and operating area according to drawing Condition Used industrial system. The system is shown fully assembled and connected in the pictures. A successful handover and instruction were documented in 2016. The current operating condition, the tightness of the tanks, the performance of the ultrasonic generators, and the function of the heating, pumps, pneumatics, extraction system, and control system should be checked again before sale or during an inspection. Inspection and functional testing possible by arrangement. Sale in the existing condition and scope of supply according to the illustrations and documentation. Dismantling, loading, and transport must be coordinated in advance due to the size and weight.

Condition: used, working width: 850 mm, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Seppi M. H3 085 flail mower / mulcher / incl. MS03 / in stock & immediately available / top condition! Price: €5,990.00 net / €7,128.10 gross - Working width: 85 cm - Overall width: 97 cm - Depth: 80 cm - Height: 66 cm - Weight: 181 kg Equipment: - incl. MS03 adapter plate - Mulching head for attachment to a hydraulic arm - mulches grass and bushes up to 3 cm diameter - for excavators from 2 to 5 tons - for mounting on various attachment plates - floating attachment (parallelogram guidance) - indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor depending on the flow rate of the carrier device - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection made of rubber - Reinforced support roller with double tapered roller bearing, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flail (standard) - 9 pieces, part number 150.02.041 OPT 428 Hydraulic gear motor 11cm³ - with flow control valve and motor safety valve DRAIN SAFE TM protects the motor in case of incorrect use - required hydraulic pressure in bar (min-max): 150 - 250 Bwedpfxjz H Hvae Agxsw - required hydraulic flow rate in l/min (min-max): 20 - 50 OPT 529 DRAINLESS system with pressure accumulator (NO leak oil line required!!) - including hoses and check valve 2 hydraulic lines are required: supply and return. No leak oil! The device is delivered without hoses, connections. We have many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse we have a very large selection of various products from Seppi M., which are immediately available! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale are reserved! Internal No.: 520042 = Further information = Year of construction: 2023 Please contact Marius Herden for further information.

Condition: refurbished (used), operating hours: 50 h, functionality: fully functional, ASCO C500 dry ice pelletizer, completely overhauled, including the electric motor. The most reliable industrial dry ice pelletizer without complex electronics. The ASCO C500 is globally recognized as one of the most powerful and reliable dry ice pelletizers ever built by ASCO. Thanks to its simple and robust technology, this machine operates largely without complicated electronics. This minimizes malfunctions and makes maintenance and repairs easy to perform. The machine has been recently serviced, is in good condition, and is ready for immediate use. Technical specifications: Brand: ASCO Type: C500 Production capacity: up to 180 kg of dry ice per hour Standard pellet size: 3 mm Other sizes available at an additional cost: • 1.7 mm • 10 mm • 16 mm Worldwide shipping. Bjdpfxjzqu Two Agxjww Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Offered is a CNC portal machining center with multiple clamping. Equipped with a large clamping table, several workholding fixtures, numerous hose connections and protective curtains on the machining portal. Inspection possible by arrangement. Bwedpfx Ags Agwqaoxsw

Condition: used, maximum load weight: 34,310 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 02/2009, next inspection (TÜV): 12/2026, loading space volume: 55 m³, total length: 11,500 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2009, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: Spitzer feed silo, 55 cm, 6 compartments, 6 dome lids (Vehicle 872) First registration: 06.02.2009 Type SF 27/55/4P ID 1532, manufactured 2009 -40/ +80 degrees Celsius 2.0 bar operating pressure Permissible gross vehicle weight 34,000/40,000 kg Unladen weight 5,690 kg Payload 28,040/33,040 kg Overall length 11,500 mm x overall width 2,550 mm x overall height 3,950 mm TÜV (technical inspection) valid until 12/2026 1 x LED reversing light 1 x LED work light front + center + 1 x on the passenger side at the rear 55 cbm capacity 6 compartments, 6 dome lids on top Bwodpfjzyzffex Agxsw Air suspension with raising and lowering function Loosening device Pressure gauges Outlets / filling points on the outside and at the rear Next internal inspection 12/2027, next external inspection 02/2029 Storage box on the passenger side in front of the frame + plastic storage box on the passenger side in front 2 x 12-ton 2-speed gear winch Air suspension with start-stop function (red+black) 1st axle: lift axle with switch BPW drum brakes ALCOA light alloy rims, predominantly Tires 385/65R22.5, 1st approx. 80/90%, 2nd approx. 50/80%, 3rd approx. 80/90% 3rd axle: steering axle Rear view camera Folding access platform with walkway 4 x wheel chocks Hose compartment / storage compartment open on the driver's side Price: €17,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: used, mileage: 8,90,270 km, power: 243 kW (330.39 HP), first registration: 01/2019, fuel type: diesel, tire size: 375/50R22.5, axle configuration: 6x2, wheelbase: 6,000 mm, fuel: diesel, fuel tank capacity: 545 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 9,450 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, power mirror, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Heated exterior mirrors - Leaf spring suspension - Brake booster - Combination lights - DAB radio - Roof deflector - Differential lock - Remote central locking - High beam headlights - Windshield - Closed cab - Speed limiter - Interior lights - Cab - Refrigerator - Refrigerator/cooling drawer - Beacon lights - Air suspension - Air-suspended seats - Air horn - MX engine brake - Particle filter - Radio/CD player - Radio/cassette player - Rotating beacon - Disc brakes - Sunroof - Sleeper cab - Hose couplings - Side skirts - Sun visor - Stability control - Automatic preheating system - Tow hitch = Further Information = General Information Year of manufacture: 2019 Registration number: 63-BLS-7 Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Transmission Transmission: 12T2210, automatic Bedpfx Agoz Hk Rboxeww Axle Configuration Front axle: Tire size: 375/50R22.5; Max. axle load: 8,000 kg Rear axle 1: Tire size: 295/60R22.5; Max. axle load: 11,500 kg Rear axle 2: Tire size: 375/50R22.5; Lift axle; Max. axle load: 7,500 kg; Steerable Weights Unladen weight: 8,860 kg Payload: 18,140 kg GVW: 27,000 kg Maintenance APK (Technical Inspection): valid until 01.2027

Condition: excellent (used), mileage: 1,22,085 km, first registration: 03/2016, fuel type: diesel, axle configuration: 8x4, wheelbase: 4,600 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, second fuel tank, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Brake booster - Speed limiter - Refrigerator - Air suspension - Air horn - Particulate filter - Reversing camera - Sun visor - Stability control - Toolbox - Power Take-Off (PTO) - Central lubrication = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 29,420 kg Transmission Bedeuxrvajpfx Agxoww Transmission: I-SHIFT, automatic Axle Configuration Front axle: Steerable Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; steerable Functional Body brand: MTS DINO 5 4A 14T 36000V Condition Technical condition: very good Visual condition: very good Financial Information Price: On request VOLVO FMX 8x4 Tridem MTS DINO 5 Suction Excavator EURO 6 L PACKAGE 510 HP DRIVE 8X4 TRIDEM, LAST AXLE LIFTABLE AND STEERABLE WHEELBASE 460 CM AIR SUSPENSION LARGE FMX CAB WITH AIR-CONDITIONING, CAMERA, NAVIGATION, REFRIGERATOR DIFFERENTIAL LOCK AUTOMATIC TRANSMISSION MTS DINO 5 SUCTION EXCAVATOR TYPE 4A14 T 36,000 V DOUBLE TURBINES!!! HYDROSTATIC DRIVE WITH REMOTE CONTROL POWER BOOM WITH ROTARY HEAD CENTRAL LUBRICATION 2X REMOTE CONTROL EXTRA HIGH-PRESSURE PUMP UNIT WITH HOSES AND GUN EXTRA AIR VALVES AT THE REAR OF THE TRUCK TO OPERATE AIR TOOLS SUCH AS A HAMMER COMPRESSOR 4,041 HOURS FAN 4,041 HOURS ALL AVAILABLE MANUALS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 19 h, load capacity: 2,500 kg, lifting height: 4,800 mm, free lift: 946 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, fork carriage width: 1,040 mm, fork length: 1,220 mm, empty load weight: 4,025 kg, total length: 2,550 mm, drive type: Elektro, construction width: 1,200 mm, Electric 4-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: New Front tire type: Superelastic Front tire size: 7.00-12 5.00S Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 6.00-9 4.00E Rear tire condition: 80 - 100% Battery voltage: 80V Battery Ah: 230Ah Battery manufacturer: CLARK FUSION Battery type: Lithium-ion Battery year of manufacture: 2026 Battery condition: New CLARK attachments S25XE: Attached fork positioner (slide type) width: 1040 mm (41) Load backrest S25XE: Load backrest 1040 mm (41) x 1220 mm (48) (width x height) 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin, CE certificate Hydraulic control and additional valve: 4 hydraulic functions - mini-lever with armrest (armrest with direction control) Hose routing (triplex): Hose routing: Double (four hoses internally routed) Bodps Ahlzdofx Agxsww Equipment: CLARK Vertical Mast System (VMS) Load weight indicator Two front headlights (mounted on the overhead guard) (LED) Front turn signals (LED) Rear combination light (LED) Rear work lights (LED) Extended tilt range (8V/6R) ISO shut-off valve (OPS) Paint: CLARK Hot Yellow Green Operator station Cabin - Level 4 - Full cabin including heater, steel overhead guard with front and rear windshield, side door including radio (two-piece) Ergonomic steering wheel (300 mm) with steering wheel button Panoramic rear-view mirror USB charging port in the storage console CLARK driver's seat with synthetic leather cover (fully suspended) Orange safety belt with automatic neutral position

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: Advanced tooling with a dense and symmetrical structure of the clamping elements. Designed for precise positioning and rigid clamping of geometrically complex components (e.g., car body panels) during automated welding or spot welding processes. The design features a high degree of repeatability of the base points and is fully adaptable for mounting on a welding rotator. COMPONENTS: Bodoz Ng Nyepfx Agxeww 1. DESTACO brand pneumatic (knee-type) clamps – 30 pieces. Heavy-duty clamping elements responsible for the mechanical locking of the part. 2. FESTO brand compact pneumatic cylinders – 14 pieces. Used for extending the positioning pins or auxiliary locks. 3. Clamp position sensors (inductive/magnetic) – approx. 30 pieces. Monitor the open and closed states of the clamping elements. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete system of manifolds with flexible hoses in thick, red, fire-resistant braids, protecting against welding spatter. 5. Valve manifolds / pneumatic distributor blocks – 2 pieces. Control the operating sequences of the individual clamps. 6. Positioning blocks, reference bases (NC blocks) and pins. Precisely milled support points with engraved technological coordinates. 7. Main structural frame – 1 piece. Rigid, stress-relieved welded structure made of closed profiles, equipped with transport lugs and mounting plates for the rotator disc.

Condition: new, power: 352 kW (478.59 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 310 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 48,000 mm, loading space width: 24,200 mm, loading space height: 8,000 mm, Equipment: ABS, AdBlue, EBS, air conditioning, crane, cruise control, differential lock, electronic stability program (ESP), navigation system, soot filter, - Automatic climate control Bwjdpfx Asylm Nhjgxew - Air suspension - Particulate filter - PTO (Power Take-Off) - Stability control Internal reference number for customer inquiries: 3-196 / AVAILABLE IMMEDIATELY MAN TGS 26.480 6x4 three-way tipper with FASSI F255A.2.24 E-DYNAMIC loading crane Crane: FASSI F255A.2.24 e-dynamic Hydraulic quadruple extension: 12.7 m at 1,415 kg E-dynamic hose routing for 2 auxiliary devices Slewing range: 400° Double knuckle boom system with PROLINK (articulated boom can be over-extended up to 15°) Electronic overload protection system with FX 500 FASSI Stability Control FSC including LMB II Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) Special outriggers, outrigger width hydraulically extendable to 6.64 m including FSC Support legs operable via remote control FL system (Full Lift): switchable fast extension valve for boom sections LED work lights Vehicle: MAN D2676 LFAI diesel engine, 353 kW (480 hp), 2,400 Nm torque, Euro 6e MAN TipMatic 12.26 OD automatic transmission MAN TipMatic driving program: Performance, Efficiency, and Offroad, up to 70,000 kg 6x4 drive configuration Leaf/air suspension Differential locks on driven rear axles 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axles 310 l fuel tank capacity, 60 l AdBlue tank capacity Full braking assistant MAN EVBec high-performance engine brake, multi-stage Disc brakes on front axle, drum brakes on rear axles Trailer coupling RINGFEDER type 4040/G150A NN cab: the practical one (narrow, medium length, standard height) Mechanically operated tilting roof Air-suspended comfort driver's seat with lumbar support, shoulder adjustment, and seat heating MAN EasyControl control panel, 4 functions, operable from outside with the door open Electrically operated front windscreen sun blind Cool box MAN SmartSelect infotainment control with touchpad and direct access buttons MAN Media System Navigation Advanced 7-inch MAN Advanced sound system Navigation map Europe and Russia Body: Three-way tipper body with FASSI F195A.2.24 e-dynamic crane mounted directly behind the cab Platform: Dimensions (LxWxH): 4,800 mm x 2,420 mm x 800 mm Front wall height: 1,000 mm Special equipment: - Fixed rear corner stanchions - Lifting aids for the sideboards - Eight lashing rings recessed in the platform floor, four per side - Hydraulic system for crane/tipper/trailer switchable via valve in cab - Positioning of underrun protection, tail lights, and supply lines on the left side - Central locking for lower locks pneumatically controlled from cab - Dual-circuit trailer tipper hydraulics Financing / hire purchase as well as leasing / partial amortization leasing available through our leasing partner. Our sales team will be happy to answer any further questions. This is a non-binding offer. Subject to prior sale, errors, and changes. General information Cab: Local traffic Technical information Number of cylinders: 6 Engine displacement: 12,419 cc Gross vehicle weight (GVW): 26,000 kg Axle configuration...

Condition: used, Year of construction: 2008, Plasma power source for plasma cutting machine Manufacturer: Kjellberg Type: HiFocus 80i Year of manufacture: 2008 Power: 80A Cutting thickness: 0.5 to 25 mm Includes hose package and torch Bodpszn Hp Ssfx Agxoww Manual gas console 31126ä

Condition: as good as new (ex-display), Year of construction: 2025, PTC CTR-H hot water unit, 95°C, steam 140°C/32 bar, and high-pressure steam 150°C/200 bar (only for the 16 l/min and 350 bar version). Trailer similar but not a Dynajet, Oertzen, Falch, DIBO, etc. - Single-axle trailer with hot-dip galvanized frame, support legs with wheel, parking brake, automatic reverse gear, stand feet, rear lights, and reflectors, drawbar with 50 mm coupling, 13" tires, and ABS. The following hot water models are available: CTR-H 21/200 | 21 l/min at 200 bar | Engine: Kohler KDW702, 12.6 kW CTR-H 20/350 | 20 l/min at 350 bar | Engine: Kohler KDW1003, 19 kW Bwsdpfofdkakex Agxsw CTR-H 16/350 | 16 l/min at 350 bar | Engine: Kohler KDW1003, 19 kW | High-pressure steam 150°C at 200 bar - Dimensions: 3,045 x 1,390 x 1,190 - Unladen weight: approx. 400 kg - High-pressure pump: Comet RW/TW Premium with integrated gearbox - HD hose reel: manual, max. 60 m 1/2" or 80 m 3/8" hose (included) - Water supply hose reel: manual, 35 m 3/4" hose - Water tank: 200 l - 75 kW heating module - Options such as warning light, automatic hose reel, and accessories available upon request

Condition: used, functionality: fully functional, mileage: 21,000 km, power: 375.1 kW (509.99 HP), gearing type: automatic, fuel type: diesel, color: green, axle configuration: 8x4, first registration: 02/2023, Year of construction: 2023, operating hours: 788 h, Equipment: ABS, traction control, Inspected used vehicle SB 1325 – Available from December 15, 2026 Standard superstructure DINO Vario 12 m³ Bwsdpfx Ao Ahyp Tjgxew MAN TGS 8x4 MTS suction excavator DINO Vario 12 m³ Standard equipment: MTS suction superstructure MTS double fan (patented) MTS material separation system (patented) Automatic filter cleaning Compressed air compressor 4.5 m³/min, 8 bar POWERARM articulated boom with 7 m suction hose 3 stabilizer supports PLC control with remote diagnostics Radio remote control Set of demolition and air release tools Storage option Optional extras: Container and lid with stainless steel lining MEGAARM articulated boom Rotating suction pipe system IKE/PERFOR Suction & drive & steer HYDROSTAT Full fairing DESIGN High-pressure water system 30 l/min, 160 bar, 500 l tank Full fairing DESIGN 3 vibrators on the suction hose Industrial equipment: Abitron instead of Groß Funk Industrial package I: grounding system Industrial package II: gas sensor Industrial package III: Ex Zone II radio Industrial package V: conductive suction hose Environmental equipment: Noise reduction package: sound insulation for the container Special accessory module: Storage boxes, stainless steel Access ladder, machine house, 2 x Ladder under hose rack Hose reel, rear for MTS spade Special accessory - lighting: Lighting package I: 3 LED lights on the vehicle frame Lighting package II: 2 LED lights on the central joint of the articulated boom Lighting package III: LED light strips in the tool box Lighting package V: LED lights next to the articulated boom shaft Lighting package VIII: Light bar on the lid (rear) Special accessory - safety: 4 flashing beacons Other special equipment: Trailer coupling, ball hitch 3.5 t with support Water tap on the right (passenger side) The general terms and conditions of MTS GmbH apply, which can be found at: saugbagger.com/allgemeine-geschaeftsbedingungen-gebrauchtfahrzeu ge Subject to errors and prior sale. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment, and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 325 mm, total width: 185 mm, total length: 483 mm, overall weight: 16 kg, type of cooling: water, electrical fuse: 16 A, welding current at 100% duty cycle: 175 A, welding current (min.): 5 A, welding current (max.): 250 A, Equipment: documentation/manual, type plate available, Complete set: LORCH T 250 DC Basic Plus TIG welding machine with WUK 7 water cooling unit and accessories For sale is a professional industrial welding machine from the premium brand LORCH, model T 250 DC Basic Plus, combined with the innovative water cooling unit WUK 7. The system is designed as a mobile all-rounder as well as a fully-fledged workshop device and shines with state-of-the-art inverter technology. Manufacturer: LORCH (Made in Germany) Model: T250 DC Basic Plus incl. optional WUK 7 water cooling unit Condition: very good, fully functional Location: Graz _____ Scope of delivery (Full Set): • LORCH T 250 DC Basic Plus TIG inverter welding machine • LORCH WUK 7 water cooling unit (direct LorchNET connection) • TIG welding torch incl. 8-meter hose package • Ground cable • Maintenance unit for gas / pressure regulator _____ The new price was approximately €6,000 _____ Highlights: • Innovative single-cable solution: Thanks to the modern cooling unit connection, the entire system (inverter + water cooling) now only requires a single power cable. The power supply and intelligent, demand-based control of the WUK 7 are carried out directly via the rear of the welding power source. No cable clutter during assembly! • High-end inverter technology: Full 250 A welding power in a compact design. • FastPuls function (up to 2 kHz): Perfect for distortion-free welding of extremely thin sheets. • Robust mobility: Extremely lightweight base unit (only 16 kg), ideal for rough use in vehicle construction, metalworking, and tank and pipeline construction. _____ Technical data: • Power range: 5 – 250 A • Duty cycle (ED) at 40°C: 60% = 200 A / 100% = 175 A • Mains voltage: 400 V (mains fuse 16 A) • Cooling capacity (WUK 7): 0.53 kW • Weight: approx. 16 kg • Dimensions welding inverter Lorch T 250 DC: 483 x 185 x 325 mm (L x W x H) • Dimensions water cooling unit Lorch WUK 7: 547 x 212 x 265 mm (L x W x H) Bwodpsyxvwijfx Agxsw _____ The device is in a ready-to-use condition. Inspection and test run are possible by arrangement.