Used Hose for sale (2,386)

Condition: used, DÜRR Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Bodpjzgckcofx Agkedi Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, BIO-CIRCLE Type: RWR 80L Auto KST Bdsdpezgclmefx Agkoi Description: RWR 80 L KST Fully Automatic PLC Parts Washing System The RWR systems from Bio-Circle are the optimal solution for cleaning internal circuit systems without disassembly. The unit is space-saving, quiet, and very easy to operate. Due to the completely closed system, there is no odor nuisance from the cleaner or the dirty water. External dimensions: approx. 1200 x 800 x 1050 mm Power supply: 400 V 50 Hz plug 16A CEE 5p 6h Drain: 1 1/4“ outlet Technical specifications: Type of contamination: Limescale, rust (mineral), oil, grease Quantity of parts: Individual parts, small series, low quantities Component geometry: Complete components (without disassembly) Quality seal: Stainless steel, service package available Maximum filling volume: 80 L Tank material: V2A stainless steel Electrical connection: 400V / 50 Hz Heating: 4.5 kW Flow rate: 25 l/min Temperature (preset): 60 °C Total weight of the cleaning system without tank filling: 180 KG Application area: The RWR 80 L KST Fully Automatic PLC has been developed for the plastics injection molding field and can be used wherever cooling channels (circuit systems, lines) need to be cleaned. Application: Fill the RWR 80 L KST Fully Automatic PLC with Power Cleaner KST 2.0. Once the minimum fill level is reached and the system is switched on, the system will begin to heat up. During the heating period, the system can already be connected to the tool via the two hoses. The 5-stage cleaning program and the change of flow direction run automatically after the instructions displayed on the display have been confirmed. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2027, loading space volume: 30 m³, total length: 8,790 mm, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2024, Equipment: ABS, KÄSSBOHRER V2A slurry tank semi-trailer, 30,000 liters - Type STN 30L/1 - 12/27 First registration 02/2024, Bdodpfx Agsz Am Eveksi German registration and from first owner Mileage only 32,771 km V2A stainless steel tank Diameter 2,200 mm 3 baffle plates 1 filling dome DN500 with hinged cover Rinsing line 4 inches through the entire tank Rotary lobe pump VOGELSANG VX 186-260 Q GL, 6,000 liters/min., interchangeable housing shells Complete piping in V2A stainless steel Rotating outlet at the rear in 6", with emptying device 8" suction port at the rear top 6x LED work lights Large hose trays on the left and right BPW axles with disc brakes WABCO Trailer-EBS with RSS stability program WABCO Optiturn - OptiTurn automatically detects when a vehicle enters a curve and then loads or unloads or lifts the third trailer axle. This improves the maneuverability of the trailer in confined spaces, as the turning circle becomes smaller and tighter curves can be taken. Furthermore, it improves the turning ability when reversing. 1st axle: LIFT AXLE Tires: 6x 385 /65 R 22.5 RENTING is the new BUYING; with us, full-service rental is available IMMEDIATELY.

Condition: excellent (used), ALKO Power Unit 250 P – used – clean air extraction unit Air filtration using filter hoses, pneumatic cleaning, movable collection container, automatic fire extinguishing system ----- Technical data ----- Extraction nozzle diameter: 250 mm, Nominal volume flow: 3,534 m³/h, Bdodpozzn Iiefx Agkei Number of bags: 2, Motor: 7.5 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,420 x 1,000 x 2,360 mm, Weight: 758 kg Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, machine/vehicle number: WFDFLT33903000213, empty load weight: 7,287 kg, maximum load weight: 27,713 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 13,550 mm, loading space width: 2,470 mm, loading space height: 2,793 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R22,5", color: green, Please note: archive images! Vehicle may currently be in use! #Chassis – haulage semi-trailer - Fine-grain steel welded construction, lightweight design up to the landing legs - Fifth-wheel plate with replaceable 2" kingpin - Preparation for lashing eyes in the floor at the sides - 24 t 2-speed landing gear, one-side operation, with straight lower section - Pull-out ladder at rear - Side-mounted door stays - Wheel chocks with holder - Aluminium side underrun protection - Steel rear underrun protection with wide Fliegl mudflaps - Quarter-shell mudguards - Rear ram protection (corner protection) - Aluminium ladder 3300 mm, with side-mounted holder - Tarpaulin pole with holder - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm #Axles + suspension - SAF disc brake axles with 430 mm disc diameter, air suspension - 1st axle: automatic lift axle incl. forced lowering and traction help, actuation "3x braking" #Braking system - Dual-line air brake system, spring brake parking brake - 2 non-interchangeable coupling heads at front - EBS (electronic braking system) with EBS socket at front - Raise & lower valve - Vehicle stability system #Wheels and tyres - 385/55 R22.5", make at manufacturer's choice - Steel rims, factory silver #Electrics - 24 Volt, multi-chamber lamps - Yellow LED side lighting - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin non-interchangeable sockets at front #Moving floor – hydraulics - Hydraulic cylinders with sliding mechanism installed in the floor - Dual-circuit hydraulics - Forward/reverse switching and on/off electrically via radio remote control - Drive system make Keith Runningfloor - Moving floor power supply via sidelights - Hydraulic operation via truck PTO - Hydraulic connection with hose at front wall and screw-type plug of high-pressure rotary coupling NB = 48 mm - Note: dual-circuit hydraulic system required! - Recommended pump output: max. 223 ltr/min (180 ltr/min recommended) - Pressure: max. 210 bar - Oil tank capacity: min. 200 ltr Bjdpfx Ajz Ti A Dsgkjdi #Moving floor – floor - Moving floor with rear wear plate, Running Floor - Aluminium floor slats, 6 mm floor profile, ribbed design - Prepared for retrofitting a floor protection sheet #Moving floor – body - Aluminium box body made of high-quality, abrasion-resistant material - Front and side walls of aluminium hollow profiles, welded all round at the top to a wide special aluminium reinforcement profile, welded into a special frame at the bottom - Moving inner bulkhead (travels with the floor) for better unloading - Reinforced tarpaulin flaps at bottom - Hydraulic rear wall with large upward opening, robust design, with radio remote control, operable only with roof open - Standing platform with ladder access on both sides (left/right in direction of travel) and railing, for opening and closing the roll-up roof tarpaulin - Removable, swivelling cross bows for tarpaulin support + tarpaulin support at front on front wall and at rear on rear wall - Hydraulic roof with tarpaulin, operable via radio remote control #Registration / plates - Germany - With Dekra inspection and expert report Please note: archive images!

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, pressure: 180 bar, empty load weight: 126 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 8/18-4C HOT-WATER PRESSURE WASHER Year of manufacture: 2023 The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 180 bar and a flow rate of 800 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 ~3-phase Flow rate [l/h]: 800 Operating pressure [bar]: 180 Max. Heating temperature [°C]: 98–155 Connected load [kW]: 6 Cleaning agent tank [l]: 15 Hose length [m]: 10 Bdjdpfx Agjz Tqwpjksi Weight [kg]: 126 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components makes the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal piping.

Condition: used, functionality: fully functional, machine/vehicle number: WSK00000001260445, empty load weight: 5,820 kg, maximum load weight: 26,680 kg, overall weight: 32,500 kg, axle configuration: 2 axles, permissible axle load (axle 1): 18,000 kg, permissible axle load (axle 2): 18,000 kg, first registration: 08/2011, loading space volume: 25 m³, total length: 8,640 mm, total width: 2,550 mm, total height: 3,570 mm, suspension: air, tire size: 385/65 R22,5", color: yellow, Attention: archive images! The vehicle may currently be in use! #Chassis tipper semi-trailer - Fine-grain steel welded construction - 2 drop-leg landing legs with round feet - 2 wheel chocks with holder - Rear underrun protection, folding - Half-shell mudguards on all axles - Anti-spray mudflaps on last axle only - 1 aluminium hook-on ladder with holder, at the side - 1 shovel #Axles + suspension - Disc brake axles - Air suspension #Braking system - 2 non-interchangeable coupling heads at front, without connecting line #Wheels and tyres - 385/65 R22.5", make at manufacturer's discretion - Steel rims, make at manufacturer's discretion #Electrics - Multi-chamber lights, amber LED side lighting - 2 white/red outline marker lights at rear - 2 x 7-pin sockets at front, without connecting cable - 2 additional LED work lights at rear #Hydraulics - High-pressure cylinder - Hydraulic operation via truck PTO - Hydraulic connection with hose #Bodies - Steel half-pipe body, inclined front wall with hydraulic cylinder mount, internal access steps on the right in direction of travel Bjdpfxjz Tzqye Agkodi - Rear wall as pendulum tailgate - Cramaro sliding cover "Cabriole", automatic rear closure as folding bow. Cover structure begins ahead of the body opening. Cover with electric drive, tractor unit socket supplied loose, operation on the semi-trailer and by radio remote control. Note! Outer width of 2550 mm is exceeded by cover attachments. This is accepted in most EU countries! Observe the registration regulations of the respective country #Paintwork - Frame: grey - Landing legs: black coated - Body: yellow with lettering - Cramaro cover: yellow

Condition: ready for operation (used), Year of construction: 2022, operating hours: 347 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 520 mm, spindle motor power: 22,000 W, overall weight: 4,600 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details. - Operating Hours: 521 hours- Spindle Running Time: 347 hours- Control Unit: OSP-P300LA-e / OSP P300L-R-TD Kit- Main Spindle Motor Power: 22 kW- Main Spindle Speed: 3,800 rpm- Chuck: 10" Hollow clamping chuck (250 mm) Type N210A8- Spindle Bore: 80 mm- Spindle Nose: A8- Turning Diameter (VDI Turret): 300 mm- Max. Turning Length (VDI Turret): 450 mm- X-Axis Travel: 235 mm- Z-Axis Travel: 520 mm- C-Axis Range: 360° (0.001° resolution)- Rapid Feedrate (X / Z): 25,000 / 30,000 mm/min- Tool Turret: V12 Radial Turret with driven tool stations (VDI40)- Turret Stations: 12 (all 12 can be driven)- Driven Tools Power / Torque / Speed: 7 kW / 23.7 Nm / 4,500 rpm- Tailstock: NC Tailstock (MT5 taper, 5.0 kN thrust force)- Supply Voltage: 400 V- Phase: 3 P- Frequency: 50/60 Hz- Rated Capacity: 28.6 kVA- Full Load Current: 41.2 A- Largest Motor Rating: 96 A- Short Circuit Ratings: 2.5 kA- Machine Dimensions (without chip conveyor): 2,545 mm x 1,870 mm x 2,057 mm- Optional Equipment & Components: * V12 radial turret for milling function * Chip conveyor with side discharge * Grundfos high-pressure pump (0.8 kW) * Touch Setter M (Tool presetter) * Tool carrier VDI40 * Real 3D graphics simulation & One Touch IGF dialog programming * 1 set of soft jaws & 1 set of hard jaws * 3 pcs. Boring bar holders * 3 pcs. External turning holders * 2 pcs. Face turning holders * 8 pcs. Reduction sleeves (2x 16, 20, 25, 32 mm) * 1 pc. Reduction sleeve MK02 * Parts catcher (max. material dim. D51mm x 150mm, max. weight 2.3kg) * Bar feeder interface * Grippex bar gripper (40mm shank diameter, gripping range 3-60mm) * Hand wash gun set (incl. pump, spiral hose, switch) * Transformer Bdedpfj Aa Aufjx Agkji Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2012, axis stroke (X,Y,Z) 5.910,1.815,655 mm Number of spindle head vertical 14 St. Number of spindles head horizontal 4 St. main drive 12 kW tool taper HSK F63 Number of axles 5 St. Number of tools 20 St. working area 5005 x 1450 x 200 mm Number of working hours 3108 h Masterwood Project 455 L, 5-axis CNC machining center ----- Machine can be viewed while still in operation! Sold ex-site. Dismantling and reinstallation by experienced Masterwood technicians available as an option! The Masterwood Project 455 L is a highly flexible, numerically controlled Bdedpfx Aez Hz Iwsgkoi 5-axis machining center featuring a robust gantry design. It has been specifically developed for the sophisticated, complete processing (drilling, milling, grooving) of solid wood, panel materials, windows, doors, and stairs. Thanks to its extended "L" configuration, the machine offers an exceptionally large working area for extra-long components. Summary of technical specifications: ----- Travel ranges: X = 5,910 mm, Y = 1,815 mm, Z = 655 mm Max. workpiece dimensions: length 5,005 mm, depth 1,450 mm, height 200 mm Max. axis speed: X = 80 m/min | Y = 80 m/min | Z = 25 m/min Work table system: "TUBELESS" (hose-free) work table with vacuum clamping system Number of table beams: 8 table beams (L-version) Positioning aids: 4 workpiece lifting devices (for heavy components) Stops: 8 rear stops, 8 intermediate stops, 1 side stop on each side (right/left) Vacuum pump Main spindle: ----- Milling spindle (main spindle): 12 kW, 5-axis spindle Spindle cooling system: Liquid circulation cooling (for maximum continuous load) Tool holder: HSK-F63 C-axis (rotation): Indexable by ± 360° Fixed drilling head: ----- Total spindles: 19 independent drilling spindles. • Vertical spindles: 7 in the X-direction, 7 in the Y-direction. • Horizontal spindles: 2 double spindles in the X-direction, 1 double spindle in the Y-direction. • Spindle spacing: 32 mm standard grid. • Integrated grooving saw: Saw unit in the X-direction, saw blade Ø 125 mm (4,000 rpm). Tool changing system ----- Carousel magazine: 16-position tool changer Additional positions: Linear tool changer with 4 positions on the machine bed for large-format tools (e.g., profile cutters or saw blades up to Ø 350 mm). Control System & Software ----- Hardware: High-performance PC-based control system with a Windows interface and a 17" color TFT monitor. Network: Integrated Ethernet card for easy online connectivity. Software Package: • MasterWork: Graphical programming system (CAD/CAM interface, DXF import, macros). • Master AT: Graphical setup aid for the optimal positioning of vacuum pods and support beams. Remote Maintenance: Equipped for "Teleservice On-Line" for direct online troubleshooting. Accessories: ----- Various vacuum clamping devices 4 solid wood clamps Veneer stops Selected tools as shown (available upon request) ----- Price for the above-mentioned machine available upon request! ----- Further Information:...

Condition: excellent (used), mileage: 1,20,104 km, power: 355 kW (482.67 HP), first registration: 02/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, fuel tank capacity: 1,465 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,520 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, power mirror, seat heater, second fuel tank, soot filter, spoiler, traction control, = Additional Options and Accessories = - Aluminum fuel tank - Android Auto - Rear work lights - Front work lights - Heated mirrors - Heated exterior mirror - Leaf spring suspension - Brake booster - Combination lights - DAB radio - Roof spoiler - Differential lock - Remote central locking - High beam headlights - Windshield - Closed cab - Speed limiter - Interior lights - Cab Bedpfx Agez A T Rvsksdi - Refrigerator/cooling drawer - Air suspension - Air-suspended seats - MX engine brake - Parabolic spring suspension - Particulate filter - Radio/CD player - Radio/cassette player - Disc brakes - Sunroof - Sleeper cab - Hose assemblies - Side skirts - Seat heating - Sun visor - Lane keeping assist - Stability control - Stand-alone air conditioning - Blind spot camera - Automatic heating system - Immobilizer - Toolbox - Windshield = Additional Information = General Information Number of doors: 2 Year of manufacture: 2025 License plate: BD-299-X Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission: 12T2210, automatic Maximum front axle load: 8000 kg Maximum rear axle load: 11,500 kg Weights Unladen weight: 8,202 kg Payload: 12,298 kg GVWR: 20,500 kg Interior Number of seats: 2 Condition Technical condition: very good Optical condition: very good

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total width: 445 mm, total length: 550 mm, total height: 985 mm, air demand: 4 m³/h, overall weight: 65 kg, pressure: 10 bar, input voltage: 220 V, warranty duration: 12 months, operating pressure: 10 bar, input current: 2 A, hopper volume: 15 l, We offer this new KEERTEK dry ice blasting machine, manufactured in 2026. Model: ICE-JET 15 Blasting media: dry ice pellets 1.6mm - 3mm Dry ice hopper capacity: 15 Kg Dry ice consumption: 30-100 Kg/h Required inlet air flow: 1-4 m3/min Required inlet air pressure: 3-10 bar Bsdpj Afnmwofx Agkjdi - The blasting machine includes an internal air system ventilation system. Power: 800 W Current: 2.5 A Voltage: 220 V Frequency: 50 Hz Weight: 65 kg Dimensions: 550x445x985 mm The package includes: - 5m air hose (3/4'') - 3.3m blasting hose (3/4'') - SET OF INTERCHANGEABLE NOZZLES: 1x soft plastic tube for delicate cleaning 1x stainless steel nozzle ø 6mm and 300mm length 1x aluminum nozzle ø 6mm and 150mm length 1x aluminum nozzle ø 8mm and 200mm length 1x aluminum flat nozzle with a 3mm x 8mm opening 1x aluminum flat nozzle with a 3mm x 19mm opening Delivery time: 1-4 weeks Shipping costs are not included in the price! If you have any questions or need further information, please feel free to send us a message or contact us by phone.

Condition: used, mileage: 6,76,000 km, power: 331 kW (450.03 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), Mercedes Antos 2545 6x2 milk tanker, Euro 6, automatic transmission, leaf spring/air suspension, lift/steer axle, long-distance cab with 1 bunk, wheelbase 4.20m, body by abo-Magyar V1000, stainless steel 1.4301, capacity 16,500L, 3-chamber (5500L/5500L/5500L), ejector vacuum system with milk transfer pump, measuring system V1000, suction hose 5m DN50, maximum transfer rate approx. 60,000 l/h, 1 level probe per chamber, Bartec double sampler for sample collection, round container system type abo Magyar (total sample and cooling by Waeco), CIP cleaning acceptance system/CIP cleaning tank, Bartetc MAK 3002 Plus data acquisition system, Webasto heater type AIRTOP 3900, reversing camera, air conditioning, radio/AUX, heated seats, sunroof, ECE Bdsdpfx Ags Agx E Uskoi Tank manufactured in 2015 First owner Service booklet/inspection book

Condition: new, Year of construction: 2024, Pad Printing Machine TIC PRL2C254 Bedpjhmpm Nsfx Agkedi 2-colour-machine, stand model, electro pneumatic control, closed ink system, ink cup ø: 90mm, cliché size: 2x100x250mm, incl. enlarged carré table with 10stations, the table is height-adjustable via spindle, pick-and-place station, enlarged pedestal, pad cleaning station with infinitely adjustable belt conveyor, corona generator with 1electrode (60mm), extraction unit with adjustable fan to suction the ozone at the corona device and to suction the solvents fumes at the ink cups, pad blowing system with adjustable jointed hoses, pad pressure: 168kg when 6bar. - Option: micro fine adjustement for printing of empossed printing objects, feeding station, suitable drying system, flaming station, optical registration. Sturdy housing made of aluminium cast, electro-pneumatic control, clear touchscreen display with modern microprocessor control, optional signal outputs for connection of peripherals. Stand models with sturdy torsion-resistant support out of steel plate with an extended downward adjustment of the feeding table to positioning of higher objects. European/Japanese pneumatic elements, low running by air sound absorbers, print parameter adjustable via display, closed ink system with register pins for magnetic fastening, ink cups with ceramic doctor ring, contact pressure adjustable via magnetic adjustment. All machines equipped with safety plates at the sides as well as emergency switch and foot switch. Needed connection: compressed air 6bar, 230V, 50cycles. Delivery time 14-16 weeks

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 45 m³, Year of construction: 2026, Equipment: ABS, Chassis material: Aluminum Fifth wheel coupling, kingpin: National (t) 12 Axle load: National (t) 8 Axle distance (mm): 1310-1310 Fifth wheel height (mm): 1175 Chassis width (mm): 1400 Loading width (mm): 2475 Internal height, front (mm) (IHF): 2165 Internal height, rear (mm) (IHB): 2165 Loading length (mm): 8486 Overall width (mm): 2550 Wheelbase (mm) (WB): 5800 Overall length: 10,300 Axles, brakes, and suspension Axles: JOST Brake type: Disc brake Brake type: JOST - DCA-T7 (Knorr Bremse) Offset (ET): 120 Option: 1st axle with lift axle and starting aid Starting aid activation: Via button in the truck and by pressing the brake pedal three times Brake pad wear indicator: Connected Air suspension: ECAS with lifting and lowering valve European Palm coupling Type: Smartboard Standard Air and electrical console: Centrally mounted on the driver's side As a steel gear support winch, type Weweler, with compensating springs, single-sided operation, and 2 speed stages Bdsdpfx Ae Agxxyjgksi Tire size: 385/65R22.5 Tire pressure monitoring: Wabco Trailerpulse Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nuts: Open Wheel nut covers: Chrome with STAS Manufacturer: Lighting ECOLED III - with STAS logo Work lights (operated via switch): With Position of work lights (operated via switch): 2 pcs. LED rear work lights (controlled via reverse signal) Operation: Underrun protection - Manually Towing eye: 1 pc. on the left Splash guard: Underrun protection - Black with STAS logo, mounted across the entire width of the underrun protection Cover: Underrun protection - With covers Handle: Underrun protection - Handle Hydraulics Manufacturer: Tipping cylinder - Edbro Type: Tipping cylinder - Hydraulic cylinder with small housing Cylinder tipping angle: Normal ±47° Model: Tipping cylinder - Edbro - CS18 Stroke: Tipping cylinder: 6733 Tipping cylinder max. pressure: 190 Surface treatment of the cylinder stages: Standard surface treatment Hydraulic coupling: Size 1 Hydraulic coupling: Gender - Female Hydraulic coupling: Hose 2,500 mm Suspension of the hydraulic hose with springs: Yes Number of splash guards on the fender: 2 pcs. Type: Splash guard - Fender - Asphalt Toolbox: In front of the axles, plastic Dimensions: Toolbox - Right in front of the axles: 860x520x500 Aluminum extension ladder: 3 m - right Mounting: Extension ladder for rear access - With hooks for hanging Position: Broom and shovel holder - With 3 holders each, mounted on the chassis on the driver's side Plastic shims: With two plastic shims incl. holder Anchoring device: Chassis - Superstructure Inclination: Front wall (°): 20 Inclination: Rear wall (°): 20 Inclination of the lower profile inside (°): 45 Front wall: 4 mm (Aluminum) Profile: Side wall - 3 mm - 2 mm, smooth design inside and outside, double-walled profiles 600 mm wide - 30 mm thick Floor: 8 mm Aluminum - 110 Brinell Position: Rubber pads - Rubber pads attached below the floor crossbeams Rear door Rear wall: Type - Hinged flap Rear wall: Aluminum Type of hinged flap: Straight design with planks Type of hinges: With double door hinge (double-joint hinge) Sliders: Rectangular design, standard Slider position: 1 slider, with operating handle, in the center on the driver's side Fastening of the open door flap: Door latch for hinged flap, positioned on the right on the driver's side Sealing: Rear wall - With rubber sealing completely around (LL sealing) Rotating locks: 4 toggle locks (left, right and 2x bottom) A

Condition: used, maximum load weight: 33,500 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 08/2011, next inspection (TÜV): 04/2027, loading space volume: 32 m³, Year of construction: 2011, Equipment: ABS, Stock No. 5867 31.5 m³ Feldbinder silo semi-trailer for powdery and granular goods / 1 compartment / aluminum rims ----* Manufacturer: Feldbinder * Type: FEUT 32.3 - Silo semi-trailer * First registration: 08/2011 * Gross vehicle weight: 37,000 kg * Unladen weight according to vehicle registration certificate: 3,500 kg * Payload: 33,500 kg * Suspension: Air suspension * Axles: 3 x BPW, with 1st axle as a lift axle / disc brakes * Tires: 385/55 R22.5, approximately 60% tread, on aluminum rims * Color: Chassis RAL 3002 chimney red, silo container RAL 1013 pearl white * Volume: 31.5 m³ / 1 compartment * TÜV (technical inspection): 04/2027 * EBS Wabco * 2 discharge cones DN800 * De-aeration mats Bjds Afr S Depfx Agkodi * Pressure tank 2 bar * Operating temperature from -40 degrees to +80 degrees * 1 top manhole cover DN450, swiveling and foldable * Pinch valves * 4 inch central discharge to the rear * Access platform with walkway on the rear left, can be erected from above * Continuous mudguards * Aluminum air reservoir * LED work lights * LED reversing lights * Rear storage box * Loading pressure gauge * 3 hose pipe boxes on the right * Without supports German semi-trailer!! German documents!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or information. We assume no liability for errors, changes, or intermediate sales. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: new, Pressure pipe to bridge a road without hindering traffic. Ideal during drag hose fertilization or water and sludge transport. Bdods Aghftspfx Agksi Status: New

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,420 h, load capacity: 5,000 kg, lifting height: 4,040 mm, free lift: 1,975 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 8.25 R15, rear tire type: pneumatic tires (air-filled), rear tire size: 8.25 R15, overall weight: 14,500 kg, empty load weight: 9,500 kg, total height: 2,650 mm, total length: 4,650 mm, total width: 2,100 mm, color: yellow, Equipment: CE marking, cabin, centralized greasing system, fork extension, hydraulic fork positioner, lighting, pallet forks, # COMBILIFT C5000FSL | DIESEL | DUPLEX 4040 MM | FREE LIFT | FORK POSITIONER | FULL HEATED CAB 🚜 🔧 FULLY SERVICED | 🛞 NEW TIRES | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a reliable and powerful sideloader for handling long and heavy materials, this COMBILIFT C5000FSL is an excellent solution for demanding industrial applications. Manufactured in 2018, the machine features a reliable Deutz diesel engine, Duplex mast with 4040 mm lift height, 1975 mm free lift, hydraulic fork positioner and full heated cabin. Before delivery, the forklift undergoes comprehensive inspection, servicing and operational testing. It is also equipped with 100% brand-new pneumatic tires. 🛞✅ ## ⭐ KEY ADVANTAGES * 💪 5000 kg load capacity * ⚙️ Deutz diesel engine * 📏 Duplex mast – 4040 mm * ↕️ 1975 mm free lift * ↔️ Hydraulic fork positioner * 🔥 Full heated cabin * 🛞 100% brand-new pneumatic tires * 📦 1200 mm platform * 🍴 1200 mm forks * 🔧 Fully serviced and tested * 🛡️ Warranty available * 🎥 Live online demonstration * 🚛 Direct delivery * 🌍 Worldwide transport ## 📋 TECHNICAL SPECIFICATIONS Manufacturer: COMBILIFT Model: C5000FSL Type: Sideloader Forklift Year: 2018 Serial Number: 38028 Capacity: 5000 kg Bdjdpfxo Agk A Aj Agkei Operating Hours: 6420 h Engine: Deutz Diesel Mast: Duplex Lift Height: 4040 mm Free Lift: 1975 mm Fork Positioner: Hydraulic Positioner Width: 1350 mm Forks: 1200 mm | 120 x 50 mm Cab: Full Heated Operator Cab Service Weight: approx. 9500 kg ## 📐 DIMENSIONS Overall Height: 2650 mm Lowered Mast Height: 3000 mm Length: 4650 mm Width: 2100 mm Platform: 1200 mm ## 🛞 TIRES Front: Pneumatic 8.25 R15 – 100% NEW Rear: Pneumatic 8.25 R15 – 100% NEW ## ⚙️ EQUIPMENT * Hydraulic fork positioner * Duplex mast with free lift * Full heated operator cabin * Deutz diesel engine * Working lights * Brand-new pneumatic tires * 1200 mm forks and load platform ## 🔧 PROFESSIONAL PRE-DELIVERY PREPARATION Before delivery, the forklift undergoes comprehensive technical inspection and servicing, including: * Engine and drivetrain * Hydraulic system, hoses and connections * Mast, chains and lifting components * Steering and braking systems * Forks and fork positioner * Tires and wheels * Electrical and safety systems * Working lights * Oils, filters and operating fluids The machine is operationally tested and prepared for immediate use at the customer's facility. ✅ ## 🏭 IDEAL FOR 🪵 Timber & sawmills 🔩 Steel mills & service centres 🏗️ Structural steel ⚙️ Metal & aluminium processing 🔧 Pipes and profiles 📏 Long steel sections 📦 Long and bulky loads 🏭 Manufacturing facilities The sideloader design makes the C5000FSL particularly suitable for transporting long materials while maintaining excellent manoeuvrability. ## 🏆 WHY FT LOGISTICS? We specialise in COMBILIFT multidirectional forklifts and sideloaders. Every used machine undergoes professional inspection, servicing and operational testing before delivery. ## 🤝 WE PROVIDE 🔧 Professional pre-delivery service 🛡️ Warranty options 👨‍🔧 Technical support 💶 Leasing & financing 🚛 Worldwide transport 📄 Export & customs documentation 🎥 Live online demonstration 📸 Additional photos & videos # FT LOGISTICS 🚜🌍 We deliver machines that are ready to work. ✅

Condition: used, power: 419 kW (569.68 HP), axle configuration: 6x6, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 67,500 mm, Equipment: ABS, EBS, air conditioning, - Brake system Iveco X-Way AS300X57 Z/P HR ON+ Short Timber Truck, axle configuration 6X4 (with hydraulically driven front axle 6x6), tandem medium drive axle (HR), disc brakes, cab version Active Space, large driver's cab, rear air suspension, 12-speed automated HiTroniX transmission, engine 570 C13 Cursor 13 570 HP Euro VI, wheelbase 4,800 mm, AS cab with high roof, roof insulation for cab, electrically operated lifting roof transparent for MLL high roof, air suspension for cab, fog lights, front halogen headlights, electrically adjustable and heated mirrors, hybrid bumper, front underrun protection, static passenger seat, one-piece lower bed, double thermo insulated box, digital tachograph 4.0, electronic immobilizer and 2nd vehicle key, luxury driver's seat air-sprung, heated, 4-way adjustable, lumbar and headrest with integrated 3-point seat belt, 2 reinforced anti-roll bars on rear axle, designed for moderate climates, exhaust outlet to the left, 170 Ah batteries, horizontal batteries on frame, rear suspension without spacers, generator 2,160 watts (24 volts x 90 amps), 2-cylinder air compressor 630 cc, rear shock absorbers, trailer socket for 24-volt operation, 15-pin, rear axle ratio: 4.23, heated fuel prefilter with separator, adaptive cruise control (ACC), ECO-Switch to switch between Power and Eco mode to optimize Total Cost of Ownership (TCO) by fuel-optimized engine and transmission settings, driving style analysis (DSE), transmission software eco-roll freewheeling function, VDI interface (Vehicle-Data-Interface) for telematics services (FMS) version 3.0, preparation for toll system (OBU), preparation for telematics system (telematics box), hill start assist (Hill Holder), electronic stability program (ESP), lane departure warning system (LDWS), emergency braking assistant, HI-TRACTION, rocking mode (free swing mode), left and right luggage compartments, 15m tire inflation hose, headlamp protection grilles, fully automatic air conditioning, leather multifunction steering wheel, sun roller blind, auxiliary heater diesel/water 4KW, front axle 8,000 kg / 1st rear axle 10,500 kg / 2nd rear axle 10,500 kg, spare wheel, reinforced front anti-roll bar, reinforced parabolic spring on front axle, AdBlue tank 80 liters, 50 mm 190 kN Ringfeder trailer coupling, fuel tank 550 liters, CAN bus interface CAN-OPEN for body control, infotainment system incl. navigation, axle load indicator, holding effect of parking brake on front axle, LED tail lights, retarder/intarder for ZF transmission, side marker lights, tires 385/65 R22.5 - 315/80 R22.5, bumper painted in cab color, aluminum air tanks, horn behind bumper, transparent sun visor. SCHEMEL–SHORT TIMBER BODY Crane: Palfinger-EPSILON loading crane Y_CRANE_ON_2 M 12 Z91 - Fully hydraulic timber loading crane Bedpfx Ageyfu Rmsksdi Manufacturer: EBERT Dimensions: approx. 6,750 mm between bulkhead and crane - 4 ExTe bolsters D5 – adjustable with clamp fastener and lashing ratchets or support for load securing - with 8 ExTe stakes D5 – telescopic - with special Z-profile subframe 200 mm high, closed with checker plate in the center of the frame - Bulkhead welded construction with internal special aluminum profiles approx. 2,600 mm high - 4 x ¼ mudguards...

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, empty load weight: 116 kg, input voltage: 400 V, warranty duration: 6 months, KARCHER HD 16/15-4 CAGE COLD WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 150 bar and 1600 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply (~/V/Hz): 3 / 400 / 50 Discharge capacity (l/h): 500 - 1600 Operating pressure (bar): 30 - 150 Maximum pressure (bar): 190 Connected power (kW): 7.5 Power cable (m): 5 Weight (kg): 116 Dimensions (L x W x H) (mm): 957 x 686 x 1080 Bjdjw S Ixkopfx Agkodi EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Highly legible and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Large wheels facilitate transport over uneven terrain

Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Special Feature: Machine with a gluing height of up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Features and Technical Specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cutable edges) - Three pressure rollers - Belt feed: - 0.25 kW - Approx. 1,250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with a thick, workpiece-protective rubber covering - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue tank with glue supply from below and fast heat-up time after machine shutdown - Flush trimming unit: - for the front and rear edges of the workpiece - Automatic sensing of the workpiece - Pneumatic trimming with a blade for cut-ready edges - Flush milling unit - With vertical sensing and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm Bdedpfxozk Nmro Agkei - Milling cutter: 70 mm, Z4, radius 2 mm/15° - Central exhaust port: 100 mm - 2 chip extraction hoods with 60 mm hose - Automatic height adjustment of the upper router bit via the belt feed - Continuous workpiece support, approx. 1,800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable film plate: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10–100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4–2.0 mm - Roller cutting: max. 1.0 × 55 mm, 2 × 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase N - Total power consumption: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg

Condition: like new (used), Year of construction: 2009, functionality: fully functional, ASCO APM 40 Automatic Dry Ice Block & Slice Wrapping Machine. For sale: a used ASCO APM 40 automatic wrapping machine, specifically designed for wrapping dry ice blocks and slices. The machine is in fully functional condition. Product-contact parts are made of stainless steel. It features automatic conveyor pitch adjustment, torque-controlled motors, and electronically controlled sealing temperature, displayed on the screen. The control panel includes visual alarms and a self-diagnostic function. Technical specifications: Bsdpjzxggljfx Agkodi - Manufacturer: ASCO - Model: APM 40 - Year of manufacture: 2009 - Condition: Used, fully functional - Working speed: Up to 25 wraps per minute - Film speed: Up to 25 meters per minute - Maximum wrapping width: 250 mm - Maximum wrapping height: 60 mm - Wrapping lengths: 40–260 mm, 140–580 mm, or 200–800 mm - Compressed air: 4–5 bar - Standard version: Right-hand operation - Location: Noordwijkerhout, Netherlands Suitable for dry ice producers and suppliers who want to automatically wrap dry ice blocks or slices. Contact us for more information. ASCO APM 40, ASCO APM40, ASCO automatic wrapping machine, ASCO dry ice wrapping machine, dry ice block wrapping machine, dry ice slice wrapping machine, dry ice disc wrapping machine, dry ice packaging machine, dry ice block packaging machine, dry ice slice packaging machine, automatic dry ice wrapper, dry ice block wrapper, dry ice slice wrapper, dry ice packaging equipment, dry ice wrapping equipment, dry ice film wrapping machine, dry ice block packer, dry ice packaging line, industrial dry ice packaging machine, used dry ice wrapping machine, used ASCO wrapping machine, dry ice CO2 block wrapping machine. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 610 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 610 CNC was manufactured in 2024. It features a longitudinal travel of 610 mm, transverse travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with a 20-station tool changer and a maximum table load of 300 kg. If you are looking to get high-quality milling capabilities, consider the KUNZMANN WF 610 CNC vertical machining centre we have for sale. Contact us for further details. Bjdo Af Nzuopfx Agkedi - Demonstration machine- Spindle Hours: 332 h- Program Run Hours: 310 h- Feed Rate (Rapid Traverse): X/Y/Z up to max. 30/30/15 m/min - Main Drive (Option Installed): SK 40 Motor Spindle, 1 - 12,000 rpm (Swiss made) - Spindle Power: 8.5 kW (S1-100% ED) / 11.5 kW (S6-40% ED) - Spindle Torque: 43 Nm (S1-100% ED at 1,880 rpm) / 58 Nm (S6-40% ED at 1,880 rpm) - Tool Interface: SK 40 DIN ISO 7388-1 Form AD (formerly DIN 69871 AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872) - Tool Clamping: Mechanical, clamping force 10,000 N, hydraulic release - Vertical Milling Head: Direct-driven, manually tiltable -5/+90°, extendable quill with turnstile (stroke 70 mm, clampable) - Rigid Angle Table Surface: 800 x 425 mm - Table T-Slots: 6 x 14 H7 (pitch 63 mm) - Max. Table Load: 300 kg - Tool Changer: 20-station disc magazine, SK 40 - Max. Tool Diameter: 75 mm (full magazine) / 150 mm (with adjacent empty pots) - Max. Tool Length: 250 mm - Max. Tool Weight: 8 kg - Tool Change Time: approx. 3 s (chip-to-chip approx. 15 s) - Positioning Accuracy (ISO 230-2): 0.008 mm (direct linear measuring systems) - Repeatability (ISO 230-2): 0.006 mm (direct linear measuring systems) - Measuring System: HEIDENHAIN absolute direct linear measuring system (resolution 0.001 mm) - Coolant Through Spindle (IKZ): 50 bar high-pressure pump (26 l/min), 4-stage pressure adjustment (15/25/40/50 bar), 25 µm double switch filter - Internal Air Cooling: Through-spindle air cooling, M-function programmable - External Air Cooling: Flexible articulated hose, M-function programmable - Paper Band Filter Unit: Trommel-mulden filter with 600 l external tank, type VDF150/50/50 (150 g/m²) filter fleece (dimensions: 1800 x 860 x 1620 mm) - Chip Conveyor: Hinge-belt conveyor integrated into 115 l coolant tank, 60° incline, lateral discharge left (height 870 / 1060 / 1200 mm) - Workpiece Probe: HEIDENHAIN TS 460 3D probe (infrared) with SE 661 transceiver - Additional Axes Preparation: 4th axis preparation (axis controller in electrical cabinet, pre-wired interface) - Automation Interface: Preparation kit for EDUCATION4.0 Cobot cell (Harting connector I/O interface, pneumatic connection, plus 2x pneumatic table connections max. 6 bar) - Enclosure Door: Automatic sliding front door driven by belt drive (manual push button & programmable) - Software Option: OCM (Optimized Contour Milling) for advanced trochoidal milling - Handwheel: HEIDENHAIN HR 510 FS electronic handwheel with axis selection and emergency stop - Operating Voltage: 400 V, 50 Hz - Power Consumption: approx. 21 kVA - Control Voltage: 24 V - Compressed Air Supply: 6.5 - 10 bar (min. 6.5 bar required at machine) - Machine Weight: approx. 2,900 kg (with tool changer)

Year of construction: 2023, condition: used, New demonstration machine! List price €1,999 net. Maximum, robust equipment and the best quality at an attractive price. Fully automatic on/off operation. Equipped with all safety devices. Completely ready for connection. High-quality electric motor with high starting torque is equipped with a motor protection switch. Starting capacitor and starting relief valve ensure easy starting. Standard equipped with a phase inverter for easy manual reversal of the direction of rotation. Compressed air generation via a high-performance HOS unit. The starting relief valve ensures easy and pressure-free starting. The two-cylinder high-performance unit made of cast iron and the low speed guarantee particularly smooth and low-vibration operation and a long service life. This ensures an even longer service life due to even less wear. High-quality compressor with optimal lubrication for a long service life and high reliability. Equipped with a high-quality intake filter. The aftercooler with large cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air, which protects the pneumatic tools. Additionally equipped with an intercooler to the aftercooler. Corrosion-free valve plates for improved heat dissipation and durability of the compressor. The large fan wheel and a cooling air deflector on the cylinder ensure optimal cooling of the compressor. A stable metal belt guard provides optimal protection of the components and high user safety. Compressed air supply to the tank via a flexible armored hose with heat protection prevents vibrational breakage. Powerful and efficient drive. The toothed drive belt facilitates starting, improves smooth running and power transmission, and reduces power consumption by up to 30%. Stable metal belt guard. Operation at the service unit. Equipped with a high-quality CONDOR pressure switch MDR 5 with a robust push-button function for fully automatic on/off operation. Filter pressure regulator for stepless adjustment of the working pressure, while simultaneously separating dirt, oil and condensate. Two large manometers indicate the tank and working pressure. Air outlet at the service unit via a comfortable safety quick coupling. Only fixed screw connections at the service unit, no hose connections. Two compressed air outlets. One compressed air outlet for filtered compressed air. One compressed air outlet via a direct outlet on the tank with a ball valve. Comfortable safety coupling - the advantages. Comfortable safety couplings from AIRCRAFT, the first manufacturer to use them as standard. Two separate locking systems for maximum work safety. Prevents dangerous whipping of the hose line. Comfortable and safe to transport and set up. Ergonomically extended handle for comfortable transport in an almost upright position - lifting stress on the back is avoided. Puncture-proof PU foam wheels and a stable steering chassis with parking brake enable easy transport. The parking brake prevents both rotational and rolling movement of the wheels and ensures an optimal position of the compressor. With a practical second transport handle on the tank, which makes it easier to carry the compressor. Technical data: Intake capacity approx. 850 l/min. Filling capacity approx. 680 l/min. Maximum pressure 10 bar. Tank capacity 100 l. Number of compression stages 2. Compressor speed 1240 min-1. Sound power level Lw 95 dB. Bdjdpfj Agch Esx Agkoi

Condition: used, maximum load weight: 29,720 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2026, next inspection (TÜV): 10/2027, Bottom loading and top loading for gasoline, diesel, heating oil, etc. Saddle plate height 1200mm unloaded. Metering system: as per GMV with additional venting, meter DN 100 / 1,000 l/min, manufacturer Sening, with full-hose valve. 1 measured outlet. Emptying hose, cylindrical shape, separate parallel tank, material: light metal, 0.5 bar test pressure. 5, 5.0 mm minimum wall thickness, head 5 mm, bottom 7.5 mm. 5 Chamber 1 with sloped bottom plate, discharge slope towards the rear (wedge). 5 3 chambers, approx. 38,500 l gross, distribution from front: 13,300 / 6,000 / 19,200 liters gross. 5 Total filling volume approx. 36,200 l net, max. filling volumes: 12,500 / 5,500 / 18,200 liters (= max. filling volumes for bottom loading according to VOC. The actual usable filling volume also depends on the permissible axle loads and the permissible total weight!). 5 Baffle plates as required. 5 Discharge slope controlled by actuating the air suspension during discharge. Lifting loops at the front and rear of the tank to upright the partially loaded tank semi-trailer. 5 Conductors (deflectors) in the chambers to dissipate static charge. 5 Supports (small tables) as bottom valve protection and for holding the filling pipe during top loading, mounted in each chamber. Walkway / ladder / folding railing: as per safety walkway on the right. 5 1 folding railing within the dome fairing, right. 5 Intermediate platforms in front of the dome covers. 5 1 access ladder at the rear right. Dome fittings: 5 per chamber: • 1 manhole cover NW 500 (EN 13317) with filling opening DN 265, recessed installation. • 1 pneumatic tilt valve with sequential control. • 1 vent pot with flame arrester. • 1 overfill protection, electric VOC version (EN 13922). Bottom fittings: « Per chamber 1 pneumatic bottom valve DN 100 (EN 13316). « 1-channel collector. Bottom loading: 5 Bottom loading cabinet on the left. • Swing flap, lockable (square lock). • Drainage channel and drainage device (front). 5 per chamber: • 1 filling coupling. • 1 electric overfill protection system (VOC) 10-pole VOC socket, acting on the land side. Unloading device: « Right side in the fitting cabinet: • Bus flap, lockable (square lock). • Drainage channel and drainage device (front). 38,500 l capacity, 3 chambers (13,300/6,000/19,200), wall thickness 5mm, tank code LGBF for low-viscosity mineral oils class 3. 1 metering system, pump 1x full-hose, discharge on the right side of the vehicle, hydraulics: 8 Hydraulic pump drive. Hydraulic hoses. Coupling plugs (supply / leak oil / return). Pneumatics: for supplying the braking system, air suspension and the tank fittings: Air tank made of aluminum. Test connections combined. Accessories: 2 fire extinguishers 6 kg in a plastic box. 2 wheel chocks. 1 changeover warning board at the rear. 3 flame symbols, foldable. 3 hazard labels “environmentally hazardous substances” (Fisch & Baum), foldable. Rear view camera, manufacturer Motec, in the upper lighting bar. Pneumatically actuated flap at the rear of the trailer. Supply of the imaging components for the tractor unit (without installation). 1 container cabinet made of light metal, rear right. Acoustic reversing buzzer at the vehicle rear. Inclination indicator (level), right. 2 grounding lugs per vehicle side. 1 aluminum hammer, right. 1 shaft hook, right. 2 pole boards, right. 2 absorbent containers with holder. Pylons with holder. Shovel and broom. Drip trays under the outlets. Shaft cover. Bdodpfo Agduzex Agkoi

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 19 h, load capacity: 2,500 kg, lifting height: 4,800 mm, free lift: 946 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, fork carriage width: 1,040 mm, fork length: 1,220 mm, empty load weight: 4,025 kg, total length: 2,550 mm, drive type: Elektro, construction width: 1,200 mm, Electric 4-wheel forklift Load center: 500 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: New Front tire type: Superelastic Front tire size: 7.00-12 5.00S Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 6.00-9 4.00E Rear tire condition: 80 - 100% Battery voltage: 80V Battery Ah: 230Ah Battery manufacturer: CLARK FUSION Battery type: Lithium-ion Battery year of manufacture: 2026 Bdsdpfx Aj Ahlzdsgksi Battery condition: New CLARK attachments S25XE: Attached fork positioner (slide type) width: 1040 mm (41) Load backrest S25XE: Load backrest 1040 mm (41) x 1220 mm (48) (width x height) 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin, CE certificate Hydraulic control and additional valve: 4 hydraulic functions - mini-lever with armrest (armrest with direction control) Hose routing (triplex): Hose routing: Double (four hoses internally routed) Equipment: CLARK Vertical Mast System (VMS) Load weight indicator Two front headlights (mounted on the overhead guard) (LED) Front turn signals (LED) Rear combination light (LED) Rear work lights (LED) Extended tilt range (8V/6R) ISO shut-off valve (OPS) Paint: CLARK Hot Yellow Green Operator station Cabin - Level 4 - Full cabin including heater, steel overhead guard with front and rear windshield, side door including radio (two-piece) Ergonomic steering wheel (300 mm) with steering wheel button Panoramic rear-view mirror USB charging port in the storage console CLARK driver's seat with synthetic leather cover (fully suspended) Orange safety belt with automatic neutral position