Used Hose for sale (2,393)

Year of construction: 1989, condition: used, Technical details: Pressure max.: 30 MPa volume flow rate: 70 cbm/min. electrics - voltage/frequency: 380 / 3Ph ~ V/Hz tank capacity: 50 dm³ l machine weight approx.: 120 kg Bsdsu Nft Hjpfx Afljww connected load: 0,62 kW dimensions L x W x H: 0,7 x Ø 600 x 1,3 m Application: Pressing grease into grease nipples Size of grease reservoir: 460 x 620mm Size of the press Ø 345 x 540mm Connection via bayonet mount Handling/operation with hand gun and 3.8 metre hose with ON/OFF switch The grease gun is mobile, equipped with handrail with two-hand grip and 220 V socket. *

Condition: used, Technical details: welding current - continuous: 400 A Bsdpfx Afou Nwbiolsww protection class: IP21 total power requirement: 23,2 kVA kVA weight of the machine approx.: 128 kg dimensions of machine: 1,3 x 0,5 x 0,9 m - E-welding and TIG - DC welding current - Cooling mode AF -control switching 2/4 cycle spot welding, stepless The following components have been replaced by NEW ones: -hose package 4.0 meters -ground clamp and ground cable 4,0 meter -pressure reducer *

Condition: used, Technical details: throat min.: 2600 mm throat max.: 4200 mm Support arm position: 360 schwenkbar ° weight of the machine ca.: ca. 1,75 t dimensions L x W x H: L:5,0xB:1,6xH:2,8 m space requirements of the machine approx.: 6,61x1,4x2,8 m WELDING STATIVE for positioning a welding torch/welding source on large wide workpieces. - The device for adjusting the gas cylinder is integrated in the frame. - Dm of the base frame = 1480mm - All adjustments are made manually. - With welding device Make: KOLBE; Type: SC 400 - 400A; protection P21; cooling E; input 380V/21kVA; welding 400V / 34V; water cooled; - Welding steps: 3x coarse and 12x fine - feeding device (removable) with 13,5m cable to the welding device - Hose package water cooled (4,0Meter) Bwjdpfx Afeu Nwyrelow *

Condition: excellent (used), Year of construction: 2010, I sell the complete aspiration system ELBH 4x Ventilator 7,5 - 11,0 KW Bwsdpfx Afsyzch Tolsw Total power apprx. 40.000 m3 / hr. Recuperation system for returning the hot air back Waste entry in container Full system of dust extraction hoses. pneumatic pads, safety elements included in price. Possible to sell immediately only as a complete set.

Condition: used, Year of construction: 2026, The CORMAK FM230-L1 Dust Collector is a professional dust extraction system designed for woodworking shops and workshops that require efficient dust collection while operating in limited spaces. Powered by a 0.75 kW motor and equipped with a high-performance impeller, it delivers an airflow capacity of 1,150 m³/h for effective removal of sawdust, wood chips, and fine dust from woodworking machines and workstations. It is a reliable solution for both professional production facilities and home workshops. Key Features Airflow capacity of 1,150 m³/h – efficiently removes sawdust, wood chips, and fine dust from machines and work areas. 0.75 kW (S1) continuous-duty motor – designed for reliable long-term operation on a standard 230 V power supply without requiring electrical upgrades. WhirlWind metal impeller – dynamically balanced for smooth, quiet operation and long service life. Mobile base – four heavy-duty bearing-mounted wheels and an ergonomic handle make transportation around the workshop easy. Sealed steel housing – minimizes dust leakage while reducing vibration for improved operating comfort. Universal Ø100 mm extraction port – compatible with most woodworking machines and dust extraction hose systems. Vacuum hose with cleaning nozzle – allows the unit to be used for cleaning floors and workstations as well as machine extraction. Construction and Technology The CORMAK FM230-L1 woodworking dust collector features a durable steel housing and a high-efficiency multi-blade metal impeller that generates strong suction while maintaining a low noise level. Integrated seals reduce dust emissions, helping keep the workshop cleaner and improving operator comfort. The machine is mounted on a robust mobile frame with four wheels and an ergonomic transport handle, allowing it to be moved quickly between workstations without interrupting production. Performance and Efficiency The FM230-L1 delivers reliable continuous performance thanks to its S1-rated motor. Operating at 2,800 rpm, it provides powerful airflow for efficient extraction from machines such as: Thickness planers Circular saws Spindle moulders Belt sanders The FM230-L1 is ideal for: Woodworking and furniture manufacturing workshops Technical schools and vocational training centres Home workshops and hobby woodworking Service workshops requiring localized dust extraction for light to medium dust loads Standard Equipment Fabric filter bag Waste collection bag Mobile wheeled base High-performance metal impeller Flexible vacuum hose with cleaning nozzle Bag mounting clamps Optional Equipment High-efficiency filter bags Extraction reducers and Y-connectors Antistatic Ø100 mm extraction hoses Multi-machine distribution manifolds Technical Specifications Specification Value Motor power (S1) 0.75 kW Motor speed 2,800 rpm Airflow capacity 1,150 m³/h Maximum vacuum pressure 1,020 Pa Noise level 65 dB Collection bag capacity 60 L Number of bags 2 Extraction inlet diameter Ø100 mm Height 1,550 mm Width 420 mm Length 800 mm Bsdpoy S Uz Tefx Aflsww Power supply 230 V Weight 27 kg WARNING!!! This machine is out of warranty. Complete and 100% fully functional. No packaging. NO WARRANTY OR RETURNS!

Condition: excellent (used), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional mechanical ventilation device used in ambulances, medical transport, emergency rooms (ER), intensive care units (ICU), and by rescue services. The device powers on and operates correctly; the display is clear, with visible menus and parameters. Good visual condition with normal signs of use appropriate for its age (see photos). The equipment is sourced from the German market. Bwsdpoz Slk Ajfx Aflsw Data and Equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: Transport • Module: LDS RD 228 • Gas supply (O₂ / Air) • Includes transport bags • Includes hoses and mounting bracket • CE marking, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes for emergency care • Adjustable parameters: Vt, frequency, FiO₂, PEEP, etc. • Clear display with parameter overview • Safety alarms Technical condition: • Used device • Fully functional – turns on and responds to settings • No current calibration certificate (certification to be arranged by buyer if required) Legal notice: Medical equipment – intended for use by qualified personnel only. Perfect for private ambulances, medical transport companies, training purposes, military, offshore operations, or as backup equipment.

Condition: excellent (used), I am offering professional HURST hydraulic spreaders – Jaws of Life – used in technical rescue operations (fire departments, emergency services). Equipment from the renowned brand HURST Rescue Systems (USA) – a market leader in hydraulic rescue tools. Condition: - Fully operational and tested equipment. - Completely functional – ready for immediate use. - Displays normal signs of use (scuffs, marks – visible in the photos), which do not affect performance. Details: Bjdpfx Aez Sl D Njflsww Manufacturer: HURST Rescue Systems Type: Hydraulic spreaders Application: Technical rescue, fire brigade Hydraulic quick couplings included Set includes: 2x HURST hydraulic spreaders Hydraulic hoses as shown in photos Applications: - Fire brigade (volunteer/professional) - Road rescue operations - Hydraulic power systems - Workshop and service operations. PRICE LISTED IS FOR 1 PIECE.

Condition: new, For sale: high-quality stainless steel compensators / flexible hoses from a reputable manufacturer. Components designed for industrial installations – ideal for compensating vibrations, thermal expansions, and misalignments in piping systems. ⚙️ Technical data Model: BOA-MS Material: Stainless steel 1.4404 (AISI 316L) Nominal diameter: DN65 Operating pressure: PN16 Type: compensating hose / steel compensator Bjdpjz Smkdefx Aflsww Length: approx. 1000 mm Connections: flanged Construction: steel braided Year of manufacture: 2021-2023 Condition: New / unused (may show signs of storage) ✅ Applications industrial installations water and heating systems steam installations chemical and food industries vibration reduction for pumps and equipment

Condition: new, I am offering a professional drum pump from the renowned German manufacturer Lutz – designed for use with various liquids (chemicals, oils, industrial media). ✅ Condition: ✔️ New ✔️ Motor housing has been replaced with an original (factory) part – the previous one was damaged during transport ✔️ Fully functional, ready for operation 🔩 Technical data: Manufacturer: Lutz Pumpen GmbH (Germany) Pump model: MP PP 50/41-R DL SS Motor: MI 4-230 Power supply: 220–230 V / 50 Hz Power: 450–500 W Current: 2.5 A Bwsdpfx Aoz Smpaofljw Protection class: IP24 Tube length: 1200 mm Material: PP (polypropylene) + stainless steel (SS) ⚙️ Applications: - Industrial chemicals - Oils, technical fluids - Industry, workshops, manufacturing - Emptying barrels and tanks 📦 Included: ✔️ Lutz pump ✔️ MI 4-230 motor ✔️ Hose + fittings as shown in the photos 🌍 Country of origin: 🇩🇪 Germany ℹ️ Additional information: - High-quality equipment – German-made - Ideal for professional applications - Shipping or personal collection available

Condition: reconditioned (used), Working width 3550 mm Working height 2550 mm Number of cylinders 5 St. Hess Quickstep Frame Press ----- Summary of Technical Specifications (Please inquire regarding any additional accessories that may be included) ----- General ----- Working width: 3550 mm Working height: 2550 mm - Siemens S7-1200 control system (replaced in 2024) PLC control for automated pressing cycle, (optional: configurable for specific pressing cycles, such as for counter-dowels or mortise-and-tenon joints) manual control mode also available - Hydraulic power unit and hoses replaced in 2024 Features: ----- > Hydraulic: Yes > Number of vertical pressing cylinders: 3 > Number of horizontal pressing cylinders: 2 > Vertical adjustment method: Electro-hydraulic (long-stroke cylinders) > Horizontal adjustment method: Electro-hydraulic > 1 Intermediate pressure beam > 1 Small-dimension spacer/insert Bwodpfx Aoz S N Htoflow > 3 Pivoting pressure plates ----- (Technical specifications provided by the manufacturer – no guarantee!) Images show the same model. Original photos not yet available.

Condition: excellent (used), For sale: a robust WEMAS column milling machine, model FM23. Cast iron construction, very rigid, ideal for tool rooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital position readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant with a separate tank and pump. Vertical spindle with a precision collet and adjustable feed. Power supply: 3×400 V. The machine is complete, has undergone a recent inspection, runs smoothly, and is ready for testing under power. It shows normal signs of use – without any disqualifying play or looseness. Included in the price: 3-axis DRO display, scales on the X/Y/Z axes, coolant tank and pump, hoses, power cable, work light. Additional information from the photos: “WEMAS” and “FM23” nameplates, spindle setting correction plate, DRO panel with mm/inch functions, ABS/INC, calculator. Working parameters, spindle taper, and speed ranges to be confirmed on-site – I can measure the table and X/Y/Z travels. Loading with a forklift is possible. I can assist with organizing transport. Bwodpfxjz Slaqe Aflew

Condition: new, functionality: fully functional, operating pressure: 250 bar, fuel: super 95, overall weight: 56 kg, warranty duration: 24 months, Technical specifications: Pump capacity (l/h) 900 Operating pressure (bar) 250 Maximum pressure (bar) 300 Water connection R 3/4" Power type: Gasoline Engine type: G390FA High mobility Color: Anthracite Weight with accessories (kg) 56.8 Dimensions (L x W x H) (mm) 878 x 538 x 702 Included: Spray gun High-pressure hose length: 10 m Power nozzle Water filter Equipment: Protective frame Crankshaft pump with ceramic piston Independence: Independence from external power sources. Complies with EU Stage V emissions standards. Convenient hand start. High mobility: Large inflatable wheels for comfort on difficult terrain. The compact and small unit is very easy to maneuver even in tight spaces. Fits in a car. Bedjwiwv Iepfx Afljww Solid and durable device: The sturdy tubular construction protects the pump from damage. A thermal valve protects the pump from overheating during circulation. A crankshaft pump with ceramic pistons. The compact Kärcher HD 9/25 G Classic high-pressure cleaner without water heating is the ideal choice for those new to using gasoline-powered devices. The device is very easy to transport in a car and enables the successful completion of even the most demanding cleaning tasks, for example, on a construction site or in municipal areas. The device offers a working pressure of up to 250 bar and is equipped with a durable crankshaft pump and a pumping capacity of 900 liters per hour. User-friendly operation is ensured by an integrated gasoline engine (EU STAGE V), which allows the device to operate independently of external power sources. Inflatable wheels ensure the necessary mobility on site, an ergonomic handle for easy transport, and practical storage space for accessories. Important parts are easily accessible for maintenance and effectively protected by thermostatic and safety valves. The HD 9/25 G Classic's sturdy steel frame also prevents external and mechanical damage. The device does not have the ability to draw water from alternative sources.

Condition: used, Technical details: Bwsdpfsu U Ihzsx Afljw power consumption: 240 A voltage: 3x400 V open-circuit voltage: 91 V power consumption: 9,3 kVA weight of the machine approx.: 28 kg dimensions of machine: 1,0 x 0,6 x 1,0 m Welding rectifier (inverter) TIG (steel/VA and electric welding hand Direct current TIG = up to 240 A / 19.6 V Electric welding = up to 240 A / 19.6 V 2/4-cycle switchover, stepless switchover to pulse Protection class IP 23 Water-cooled and frost protection Gas-cooled torch head with remote control for welding current Shielding gas / solenoid valve Equipment: Hose package 7.0 meters Ground clamp and ground cable 3.3 meters *

Condition: good (used), 1 used, well-maintained, water-cooled MIG-MAG welding machine Manufacturer: RÖWAG Model: KGL 450-2 Technical data: Welding current range up to 450 A Weight approx. 200 kg Accessories / Special features: - Water cooling - Separate wire feeder with 4-roller wire feed - Incl. hose set, pressure regulator and ground cable without the welding wire spool shown in the picture! Bedehy Tmzspfx Afljww Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Operating hours: 80 h, condition: excellent (used), functionality: fully functional, Industrial high-performance leaf vacuum with trailer and auxiliary trolley. Flawless condition, fully operational! Easily detachable from the trailer and can, for example, be transferred to a flatbed. The price includes a new suction hose, which is not visible in the picture. The ELIET TRUCKLOADER TL 450 PRO HD has been tailored to the specific requirements of intensive users. Its powerful engine gives this machine the suction capacity to handle large volumes of leaves effortlessly. With the ELIET TL 450, you can rely on a robust, reliable, and ergonomic machine with guaranteed low maintenance costs. Bwodpfx Aexmrwrjflew

Condition: used, mileage: 6,89,000 km, power: 300 kW (407.89 HP), first registration: 09/2009, fuel type: diesel, axle configuration: 3 axles, next inspection (TÜV): 01/2027, color: white, gearing type: automatic, emission class: euro3, Year of construction: 2009, Equipment: ABS, air conditioning, electronic stability program (ESP), * Mercedes Actros 2541 6x2 Tank Truck * Euro 5 * Willig Tank Body, 20,000 liters, built in 2010 * 3 compartments * 8500L / 6000L / 6500L * 2 x Hose Reel * Additive System * For local distribution * Lift Axle * For local distribution * Sening Multiflow Meter * Pump * Top and bottom filling * Pump * Trailer coupling * Air conditioning system * Heated seats * Alcoa aluminum rims * Radio/CD * First owner * Valid vehicle inspection until 01/27 * ADR FL certificate valid until 01/27 * Next tank inspections: 01/28 & 01/31 * All tank documentation available Bedpj Ahvczsfx Aflsww

Condition: used, mileage: 76,449 km, power: 175 kW (237.93 HP), first registration: 06/2020, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2027, color: orange, gearing type: automatic, emission class: euro6, total length: 7,300 mm, total width: 2,450 mm, total height: 3,550 mm, Equipment: ABS, electronic stability program (ESP), * Special equipment: combined HD flushing and suction unit, type ZSA6500K * Steel tank, 6500 L, including water chamber 2500 L * Vacuum pump RFW150 Wittig, 1427 m³/h * High-pressure pump Pratissoli KF36A, 160 bar, 122 l/min, 873 m³/h * Suction hose cassette DN100, telescopic and pivoting * HD hose reel with 120 m DN19 and 40 m DN13 Bwsdpfx Aszxai Hofljw * Remote control, wireless and cable * Meter counter * Winch * Stainless steel storage box * Rear traffic warning light system * Hydraulic tailgate * Hydraulic tipping device for tank * Hydraulic pivoting hose reel * Rotating beacon at the rear and in the cab * Axle load, front axle: 6.1 t * Trailer coupling: towing hitch * Exhaust pipe raised behind the cab * Battery 165 Ah * Suspension: front springs 6.1 t * Electric window lifts * Gearbox: 8-speed - type: G 140-8 * Power Shift * Gearbox lock for auxiliary drive * LED light package * Vehicle outline lights, LED * White side turn signals * Heated air dryer * Enhanced engine brake * Enhanced engine compartment encapsulation * Auxiliary drive MB 121-2c * Parameterizable special module * Rotating beacon, left/right * Rear crossmember for trailer coupling * Circuit breaker * Seats in the cab: driver's seat with armrest * External sun visor * Sun protection roller blind, side window, driver's door * Reinforced rear axle stabilizer (for extremely high loads) * Steel rims 7.50x22.5 * Preparation for additional turn signals * Oil cooler for gearbox Additional equipment: * Emissions standard EURO 6D * Axle configuration: 4x2 * Approach/front mirrors * Exterior mirrors, electrically adjustable, left * Cockpit Classic * Differential lock, rear axle * Two-step entry * Cab: S ClassicSpace * Cab variant: ClassicSpace * Suspension: leaf/leaf * Suspension: rear springs 10.5 t * Generator 100 A * Urea tank (AdBlue): 25 L * Manually operated lifting roof (steel) * Rear axle, crown wheel 390 * Hydraulic pump (Meiller pump - 5 pistons - 255 / 1) * Info display 10.4 cm with additional display * Fuel tank: 120 L * Engine 7.7 L - 175 kW R6 diesel (OM 936) * Wheelbase 3260 mm * Rear window * Seat cover/upholstery: fabric, seats in the cab: passenger single seat, fixed * Seats in the cab: driver's seat, standard sprung seat * Splash guard, rear fender * Tachograph / EG control unit * Fixed rear underrun protection * Front underrun protection * Preparation for toll collection * Immobilizer * Permissible total weight 16.00 t * Rear view camera * and more * Errors, changes and prior sale reserved

Condition: reconditioned (used), functionality: fully functional, pressure: 160 bar, empty load weight: 53 kg, input voltage: 400 V, warranty duration: 6 months, KÄRCHER HD 7/16-4 ST COLD-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel spray lance, a steel-reinforced high-pressure hose, and an adjustable nozzle. This version of the machine features a simple electrical system without complex electronics. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 160 bar and a flow rate of 700 l/h, the machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL DATA: Voltage [Ph / V / Hz]: 3 / 400 / 50 Flow rate [l/h]: 700 Inlet water temperature [°C]: max 70 Operating pressure [bar]: 30 – 160 Maximum pressure [bar]: 190 Bedpj Afyl Sefx Afloww Connected load [kW]: 5 Weight including accessories [kg]: 53 Dimensions (L × W × H) [mm]: 533 × 420 × 790 EQUIPMENT: NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW 10m steel-reinforced high-pressure hose NEW power nozzle 25° Water filter and GEKA claw couplings – INCLUDED FOR FREE KEY FEATURES: Open oil system – no operating time limits Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and simple to service

Condition: reconditioned (used), Year of construction: 2019, operating hours: 579 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 74 l, HAKO SCRUBMASTER B70 TB650 FLOOR SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Bwodpfxs Af Iids Aflow Manufactured in 2019, with 579 operating hours 650mm cleaning head (TB650) equipped with two new medium-stiffness disc brushes, suitable for use on any surface New polyurethane squeegee blades, resistant to contact with oils, greases, and petroleum-based substances A built-in battery charger and wheel drive facilitate daily operation. The unit is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high-power water extraction from the squeegee assembly. Each unit we offer is photographed individually; you are purchasing the exact machine you see. TECHNICAL DATA: Supply voltage (V): 24 Brush working width (mm): 650 Squeegee working width (mm): 950 Theoretical coverage (m²): 3200 Operating speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW 12V 105Ah SIAP gel batteries (2x) NEW 330mm PPL 0.5 disc brushes (2x) NEW 24V 500W suction turbine NEW suction hose NEW drain hose NEW splash guard for the brush head Squeegee assembly with new oil-resistant rubber blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: The 72-liter tank capacity allows for a large volume of cleaning solution, minimizing the need for frequent interruptions to refill. The machine’s design ensures excellent maneuverability. A small turning radius allows for operation even in narrow passageways and aisles. The parabolic squeegee assembly ensures thorough suction of the cleaning solution from the surface being cleaned. A large working width (650 mm) ensures high area coverage. The control panel is highly legible and intuitive to use.

Condition: reconditioned (used), functionality: fully functional, empty load weight: 94 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 698 C Eco HOT-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced high-pressure hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 160 bar and a flow rate of 650 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL SPECIFICATIONS: Model: HDS 698 C Eco Supply voltage (V): 400 ~ 3-phase Flow rate (l/h): 650 Operating pressure (bar): 30 - 160 Max. Water heating temperature (°C): 80–155 Connected load (kW): 4.5 Dimensions (L x W x H, mm): 940 x 600 x 740 High-pressure hose length (m): 10 Weight (kg): 96 EQUIPMENT: NEW heavy-duty high-pressure spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced 10m high-pressure hose with steel-wire braiding NEW 25° power nozzle Water filter and GEKA-style quick-connect couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no restrictions on operating time Built-in detergent tank allows for the application of cleaning agents directly through the machine Bjdo Afxr Hjpfx Afleww Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Integrated tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal plumbing.

Condition: excellent (used), Year of construction: 2010, I sell the complete aspiration system ELBH 5x Ventilator 7,5kW Total power apprx. 45.000 m3 / hr. Bwedpfxsrft Ais Aflew Recuperation system for returning the hot air back Full system of dust extraction hoses. pneumatic pads, safety elements included in price. Year 2010 Possible to sell immediately only as a complete set.

Condition: like new (used), operating hours: 300 h, ASCO A120P Dry Ice Pelletizer 300 h A robust and reliable industrial dry ice machine, suitable for the production of high-quality dry ice pellets for cleaning, cooling, and transportation. Specifications Bwjdpfx As Ad U Hnjflsw Brand: ASCO Type: A120P Operating hours: 300 hours Ready for immediate use Major maintenance performed (2024) Service documentation available The machine comes with the original documents, including: Original ASCO service report Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Year of construction: 2026, FAN1500 Material Handling Fan – Compact Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN1500 is a compact industrial material handling fan designed for efficient extraction and pneumatic transport of sawdust, wood chips, dust, and other dry particles generated during the processing of wood, plastics, and composite materials. Equipped with a 1.5 kW motor and a high-efficiency centrifugal impeller, it delivers an airflow of up to 3,000 m³/h, making it a reliable component of professional dust extraction systems. Key Advantages Airflow up to 3,000 m³/h – efficient extraction and transport of sawdust and airborne dust 1.5 kW / 400 V motor – designed for continuous industrial operation 2850 RPM operating speed – ensures strong and consistent airflow 150 mm inlet and outlet connections – easy integration into dust collection systems Compact dimensions (575 × 510 × 500 mm) – suitable for workshops with limited installation space Heavy-duty steel construction – durable and resistant to demanding workshop conditions Construction and Technology The FAN1500 features a direct-drive centrifugal fan with an aluminum impeller mounted directly on the motor shaft. This design minimizes power losses while maximizing aerodynamic efficiency. The powder-coated steel housing provides excellent protection against corrosion and mechanical damage, while the rigid one-piece construction reduces vibration and operating noise. The fan can operate as a standalone extraction unit or as part of a larger centralized dust collection system. Performance and Efficiency The high rotational speed combined with the optimized impeller geometry ensures smooth and consistent airflow, even in environments with heavy dust concentrations. The FAN1500 efficiently transports fine and medium-sized wood waste without clogging, making it ideal for continuous industrial operation in woodworking shops, CNC production facilities, and manufacturing lines. Applications The CORMAK FAN1500 is suitable for: Woodworking workshops Furniture manufacturing facilities CNC machining centers with dedicated dust extraction Mobile dust collection systems Production lines generating sawdust and fine dust Plastic and composite material processing Standard Equipment Powder-coated steel housing 1.5 kW / 400 V three-phase motor Direct-drive centrifugal aluminum impeller 150 mm inlet connection 150 mm outlet connection Heavy-duty mounting frame Optional Equipment Flexible suction and discharge hoses (Ø150 mm) Adapters and reducers for different duct sizes Textile filter bags, cyclone separators, and final-stage filters Remote control and timer switch systems Technical Specifications Parameter Value Maximum Airflow 3,000 m³/h Inlet Diameter 150 mm Outlet Diameter 150 mm Motor Speed 2850 rpm Motor Power 1.5 kW Power Supply 400 V Dimensions (L × W × H) 575 × 510 × 500 mm Weight 32.5 kg Bwedpfx Afs Afnuzsljw PLEASE NOTE!!! This machine is a returned item; it has minor damage to the casing and bent grilles. It has been partially repainted. NO WARRANTY AND NO RETURNS!

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining unit, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3mm Workpiece height: approx. 10 - 40mm Feed speed: approx. 8m/min Noise protection hood Bedpszn Afpefx Afljww Extendable workpiece support Dust extraction connection 1x100mm, 4x80mm including the piping shown in the picture to 200mm Easy-Touch control with color screen for easy machine operation 10 programs can be saved Units: Upper pressure, manual adjustment with crank and SIKO counter Infeed guide, manual adjustment with SIKO counter Jointing cutter with diamond cutters, sharpened A total of 2 interchangeable glue tanks for quick color changes from white to transparent Gluing unit with automatic edge infeed for roll material up to 3mm Pressure zone with 3 rollers Cut-off saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering and radius Corner rounding cutter R2 with diamond cutter, 1 motor-driven Radius trimming blade R2, manually adjustable Glue seam trimming blade with large roller, pneumatically controlled Hood lock CE marking Operating manual as a folder All indexable inserts of the milling units and trimming blades have been renewed or re-sharpened, saws sharpened, diamond jointing cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been renewed, but is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses renewed. Approx. 1200 operating hours, i.e. only 1/2 hour per day. Machine dimensions: approx. 4300 (with table) x 1250 x 1600mm (LxWxH) Weight: approx. 950kg. The machine can be demonstrated on-site after prior arrangement. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this supplier".

Condition: used, Year of construction: 2014, operating hours: 14,877 h, load capacity: 2,000 kg, lifting height: 3,800 mm, load center: 500 mm, fuel type: gas, mast type: duplex, construction height: 2,380 mm, fork length: 1,200 mm, empty load weight: 3,750 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REMADE FOR ACTION WE ARE HERE FOR YOU. WITH COMMITMENT, PASSION, AND EXPERTISE. Pre-owned industrial trucks from select premium manufacturers – fully serviced, tested, and professionally refurbished by us according to FEM-4.004 (UVV) standards. - Over 350 vehicles in stock - Custom modifications of any kind available upon customer request - International transport with suitable vehicles and customs clearance available upon request - See for yourself and visit us at our facility Friedmann Forklifts – Our Quality Promise Bsdsy Rm Aaspfx Aflsww - Fully operational according to FEM-4.004 - Serviced & tested batteries (C5-test) on electric units (minimum 70% capacity) - Serviceable tires as per FEM-4.004 (minimum 70% tread depth) - Mast, carriage, attachments, and hydraulic system/hoses inspected - Steering axle safety inspected - Forks and lift chains inspected - As-new driver seat and safety belt - New paint in OEM colors and original decals Industrial Truck Data - Manufacturer: Jungheinrich - Model: Counterbalance Forklift TFG 320s - Drive type: LPG (liquefied petroleum gas) - Load capacity: 2,000 kg - Year of manufacture: 2014 - Operating hours: 14,877 - Lift height: 3,800 mm - Mast type: Duplex - Overall height: 2,380 mm - Fork length: 1,200 mm - Unladen weight: 3,750 kg - Load center: 500 mm - Tires: Solid rubber