Used Hot Rolling Mill for sale (19,987)

Condition: used, Year of construction: 2001, material width 400 mm material thickness 0,5 - 4,0 mm material cross-cut 1200 mm² roll diameter 80 mm Ihedpfevzxqljx Adwst feed length - 9999,9 mm speed - 90 m/min weight of the machine ca. 0,5 t dimensions of the machine ca. 1,2 x 1,0 x 1,2 mxmxm servo roll feed

Condition: used, material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm Weight 0,40 t required space 0,9 x 0,8 x 0,7 m mechanical roll feed Ihsdpfovuuntjx Adwst drive via main shaft / pivot shaft of the press - pivot shaft / mounting plate not included max. no. of strokes approx. 1500 / min as is where is, WITHOUT putting into operation, in given condition

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. Ihjdpsv Nxbyefx Adwjt - Subject to prior sale -

Condition: excellent (used), Year of construction: 2009, operating hours: 999 h, functionality: fully functional, machine/vehicle number: 0121, Used CNC gear rolling machine Ihodpfx Adsx Tb R Dewjt Manufacturer: PROFIROLL Model: ROLLEX HP Year of manufacture: 2009

Condition: used, Table size 630 x 200 mm X/Y/Z - 250/200/300 mm Spindle speeds 2000 rpm Spindle taper MT 4 Automatic feeding & rapid feeding in all directions Equipped with Ihsdpfx Aeyaai Redwst Universal inclining table 500 x 200 mm Drilling head w/60 mm movement Rotary table 250 mm Rotary dividing table 250 mm Dividing head Vice 140 mm Collet chuck w/various collets Coolant

Condition: used, Year of construction: 1981, Table size: 1200 x 1000 mm Table height: 850 mm Swivel range: -5° to +45° Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Height adjustment: 120 mm Tool holder: MK5 incl. integral fence Weight: approx. 1000 kg Storage location: Supplier Ihedpfx Aex It Auodwet

Condition: used, Year of construction: 1991, Table size: 1100 x 760 mm Table height: 870 mm Cutter spindle mount: MK 5 Speeds: 3000/4500/6000/9000 rpm Height adjustment: 120 mm Table opening swivel plate diameter: 450 mm Swivel range: -5° to +45° Weight: approx. 850 kg Storage location: Supplier Iodpfx Adex It Answjht

Condition: good (used), Year of construction: 2008, Ref. -No.: 10621 Manufacturer: PAMA Type: Speedmat 3/TR16 Year of construction: 2008 Type of control: CNC Control: SIEMENS SINUMERIK 840 D PL Storage location: Halberstadt Country of origin: Italy X-Travel: 3500 mm Ihjdpjyagiksfx Adwet Y-Travel: 2500 mm Z-Travel: 2200 mm W-Axis: 800 mm Bore Spindle Diameter: 160 mm Table Load: 12000 kg Table surface: 1600 x 2000 mm Tool Taper: ISO 50 BIG PLUS Turning Speeds: 3500 RPM Max. Torque: 2.765 Nm Rapid Travel X/Y/Z: 25000 mm / min Drive Capacity - Spindle Motor: 46 kW Internal cooling: 15 / 45 bar External cooling: 50 / 4 bar Spindle speed gear stage 1: 2.120 1 / min Spindle speed gear stage 2: 2.765 1 / min Further information: Automatic tool changer SK50 DIN 69871, 80 positions. Automatic angle milling head TS 35 with 360 positions, speed 2,000 rpm and torque 2,000 Nm. Automatic universal milling head TU25C (2-axis), speed 3,000 rpm and torque 800 Nm. Automatic accessory changer, 2+1 units. Touch probe (Renishaw). The machine can be inspected under power.

Condition: good (used), Year of construction: 1997, Ref. -No.: 10620 Manufacturer: SKODA Type: W 200 T Year of construction: 1997 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany X-Travel: 16000 mm Y-Travel: 5150 mm Z-Travel: 1600 mm W-Axis: 2100 mm V-axis: 2000 mm B-Axis: 0 - 360 ° Spindle Diameter: 200 mm Table Load: 80.000 kg Isdpfsyagidox Adweht Tool Taper: SK 60 / SK 50 Turning Speeds: 1000 RPM Rotary table diameter: 3500 x 3000 mm Further information: Including angle head Machine can be inspected under power.

Condition: excellent (used), functionality: fully functional, mileage: 1,82,961 km, power: 330 kW (448.67 HP), first registration: 07/2020, fuel type: diesel, empty load weight: 14,160 kg, maximum load weight: 17,840 kg, overall weight: 32,000 kg, axle configuration: 8x4, next inspection (TÜV): 11/2025, brakes: intarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, seat heater, DAF CF 450 / HYVA 30-67-S Hooklift 30-Ton Hook / Steering Axle / 8x4 • Manufacturer: DAF • Model: CF 450 • Mileage: 182,961 km • First registration: 07/2020 • Power: 330 kW / 450 hp • Drive formula: 8x4 • Intarder • 1st and 2nd axles steered • 3rd and 4th axles driven • Hooklift system: HYVA 30-67-S • 30-ton hook Isdpfx Adoxrf Eaewjht • Transmission: Automatic • Suspension: Leaf spring front and rear • Cruise control • Air conditioning • Heated seats • ABS • EBS • Unladen weight: 14,160 kg • Payload: 17,840 kg • Gross vehicle weight: 32,000 kg • Euro 6 emission standard • German vehicle • German documents • Immediately available for operation • This offer is non-binding and subject to prior sale. - Subject to prior sale - Errors and/or typographical mistakes excepted - Sale according to our terms and conditions.

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Features and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Dimensions (LxWxH): 1200x80x1350 mm Fence jaws made of wood Including wood-based 3-roller power feed with stand With chassis Dimensions: to follow Isdpfx Ajxllxasdweht Weight: to follow Availability: short-term Location: Flörsheim

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 23 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,000 kg, empty load weight: 3,000 kg, loading space volume: 38.6 m³, loading space width: 2,300 mm, loading space length: 7,000 mm, loading space height: 2,400 mm, Price on request. The price applies ex stock 33106 Paderborn! Quantity discounts available for the purchase of multiple containers. Leasing/hire purchase options available. Double-leaf door (DFT) 4 units immediately available from stock, RAL 7043 1 unit immediately available from stock, RAL 6004 blue-green 1 unit available at short notice, other RAL colours available on request Technical specifications: • Internal dimensions: 7000 x 2300 x 2400 mm (L x W x H) • Usable volume: 38.6 cbm • Unladen weight: 3,000 kg • Floor 5 mm S235 • Side walls 3 mm S235 • All sheet metal and profiles fully welded • Double-leaf door with security locking system • Warning markings in accordance with DIN 67620 • Container inspected and approved according to DGUV 114-110 • Floor-wall connection 45° • Hook diameter 50 mm, S 355 • Hook height 1570 mm • Upper frame round tube 89 x 6.3 mm • Net hooks • All moving parts greaseable • Steel running rollers 159 x 6.3 mm, length 300 mm • Interior and exterior zinc phosphate primed, exterior finished with synthetic resin paint (80-100 μ) • Permissible total weight 15,000 kg Iedpfxow D A Rte Adweht Other designs and sizes available ex stock Paderborn. You are welcome to view our stock list on our website. Skip containers to DIN 30720 Errors and prior sale excepted. Photos for illustration purposes only! For further information, please send us a message or give us a call.

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Crosscut saw: - Max blade diameter: 380mm Iodpfex S Iw Uox Adwjht - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, Year of manufacture: 2017 Commissioning: 06-2017 Spindle hours: approx. 8,000 Control: Mazatrol Smooth X 5-axis simultaneous machining Maximum turning diameter: 658 mm Maximum turning length: 1,519 mm Travel paths: - X-axis: 615 mm - Y-axis: 250 mm - Z-axis: 1,585 mm - W-axis: 1,574 mm - B-axis: -30° to 210° Rapid traverse: - X/Y/Z/W: 50/40/50/30 m/min Main spindle: - Drive power: 30 kW - Maximum spindle speed: 4,000 rpm - C-axis - Max. bar capacity: 80 mm Sub spindle: - Drive power: 26 kW - Maximum spindle speed: 4,000 rpm - C-axis Milling spindle: - Drive power: 24 kW (oil-air lubrication) - Maximum spindle speed: 12,000 rpm - B-axis: 0.0001° - Capto C6 Tool magazine / ATC: - 72 tool stations - Max. tool diameter: 90/125 mm - Max. tool length: 400 mm - Max. tool weight: 12 kg Special equipment: Ihodjyam D Uspfx Adwet - Mayfran Consep 2000 II chip conveyor, dual change filter - Preparation for high pressure coolant (IKZ) 70 bar - 70 bar high pressure pump, 7 pressure stages - Air blow device at upper turret - Interface for bar feeder - Automatic parts catcher (D:80 x L:150 x 5 kg) - Gear milling - Milling spindle synchronized thread cutting - Constant incline angle during rapid traverse movement - Thread re-cutting function - Turning/milling function in Mazatrol - 5-axis machining package for SmoothX: - EIA/ISO 5-axis simultaneous machining - F) Tool tip control for 5-axis simultaneous machining - Spline fine interpolation - 5-axis spline interpolation - Sub spindle with C-axis including synchronization C1+C2 - Preparation for multiple and flash tool toolholders Dimensions / Weight: - Dimensions (L x W x H): 4,910 x 2,800 x 2,720 mm - Weight: 16,900 kg General machine options: - B-axis 0.0001° - C-axis main spindle input accuracy 0.0001° - Sub spindle positioning without C-axis input accuracy 0.001° - Absolute positioning system (linear axes) - Working area lighting - Operator door with safety interlock - CE standard - Double foot switch for both main and sub spindle - Separate switches for opening/closing chucks - Hydraulic pressure lock - Fully enclosed work area - Automatic opening/closing of chuck jaws for main and sub spindle - Chuck status feedback for main and sub spindle - Chuck status feedback via sensors - Tooleye for upper and lower turret - Lead error compensation input X, Y, Z - Standard tool set (lower turret)

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Wire diameter range: up to 500 N/mm² 22 - 7,0 mm up to 1.000 N/mm² 21 - 8,0 mm Iodpjyak Eisfx Adwoht over 1.000 N/mm² 20 - 8,0 mm Number of kalibers: 10

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 5000 PVC 3 AXIS CNC MILLING MACHINE, - It can perform DOOR, WING, ARM and SLIDING operations on PVC profiles thanks to 3 different motors. - 3 axis servo motor system Ihodora Nxaopfx Adwst - Easy point-to-point programming - Unlimited memory capacity - Water drain opening feature (inside) - Metering system with right and left support

Condition: reconditioned (used), functionality: fully functional, Bun Divider Rounder Fortuna Automat A 4 E Dough dividing and rounding machine TOP model with rounding deactivation Head cleaning with electric motor Dividing head completely overhauled, 30-piece with NEW stainless steel knives Dough input: 1200 to 3600 g robust technology DGUV V3 safety tested with return button Ijdpfx Adsyalbreweht Connection: 400V, 16A CEE plug Dimensions approx.: 770 x 730 x 1500 mm (WxDxH) Refurbished used machine with warranty + spare parts service Option: Stainless steel stand Rounding plate Service package Maintenance contract Spare parts box Delivery service Training & commissioning You’ll find a TOP selection of bun divider rounders with us!

Condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill Ihodpfx Adjwg Axvjwot -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 01/2027, type of input current: three-phase, overall weight: 1,000 kg, König Rex T5S Head Machine Dough divider and rounder Robust construction Weight range approx. 30 to 85 grams with discharge conveyor Connection: 400V, 16A-CEE plug Ihjdpfoyaklijx Adwet Used machine Visit our large bakery machines warehouse!

Condition: used, Technical data: Working range X axis: 500 mm Y axis: 400 mm Z axis: 300 mm Work spindle Tool holder: ISO 40 Automatic feeds: 0.2 - 0.6 - 0.12 mm/min Spindle speeds: 20 - 4000 1/min, directly programmable Feed range: X / Y / Z = 1 - 3000 mm/min Rigid table: 700 x 350 mm, 5 T-slots Ihjdeqbq Ufspfx Adwst Fixed table: max. load capacity 250 kg Connection: 400 V Weight, approx.: 1900 kg Machine dimensions, approx.: 2400 x 1850 x 1850 mm Space requirement: 3200 x 4100 mm, height 1920 mm Features: - CNC control - Fixed table - Milling head swivels +/- 90 - Hydr. clamping device - Coolant device - Emergency stop button

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 Iodpfx Aox Sylqedwoht TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: like new (used), Year of construction: 2022, operating hours: 800 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: Ihodsx E Dncopfx Adwot - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 551 PORTATİF KOPYA FREZE MAKİNESİ, - Used for lock handle, hinge, espagnolette slots and grooving in desired size on aluminum and plastic profiles - Copy assembly suitable for your operation Ihedpfjrcm D Dex Adwjt - Various grooving features independent of the copy assembly with the help of the stop OPTIONS - Lower cabinet system - Pneumatic system

Condition: used, Field of application: Mining Explore the superior processing capabilities of the Polygonmach Coarse Material Washer, a state-of-the-art solution designed to exceed expectations in processing sand and gravel. Polygonmach, a leading name in the industry, constantly pushes the boundaries of innovation to bring high-quality, reliable solutions to businesses. The Polygonmach Coarse Material Washer is a fundamental tool in the industry, specializing in the thorough cleaning, classification, and dewatering of coarser fractions. Designed to handle robust materials such as sand and gravel, it significantly enhances the quality of your output, leading to increased customer satisfaction and business growth. Built with high-capacity processing in mind, our Coarse Material Washer employs powerful scrubbing technology. This action facilitates the removal of impurities, thus unlocking the true value of your raw materials. The result is high-quality end products that meet rigorous industry standards. One of the key features of the Polygonmach Coarse Material Washer is its replaceable heavy-duty paddles. These are engineered to withstand the harsh environment, thereby increasing machine lifespan and reducing maintenance costs. The robust design is well-suited to large-scale operations, delivering high-volume processing efficiently. Moreover, it comes with an adjustable weir plate that offers control over the water volume and the fines. This flexibility empowers you to produce materials of desired specification and moisture content, guaranteeing consistent product quality. The Coarse Material Washer from Polygonmach is not only highly functional but also user-friendly. Iedpfx Adex Dh S Hswsht

Condition: used, Year of construction: 2003, x-travel 4.000 mm y-travel 1.000 mm z-travel 1.500 mm control Heidenhain iTNC 530 spindle tunring speed 5.000 U/min tool taper SK 50 number of tool places 40 Pos. Number of working hours ca. 15.829 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Automatic swivel head with B-axis, infinitely variable - Internal coolant supply 20 bar Ihjdpfx Adoxylqrowst - Air blower through spindle - Chip conveyor - Chip flushing Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.