Used House Connection Column for sale (23,542)

Condition: used, Workshop-refurbished Single-Column Eccentric Press WEINGARTEN Type AV 40 Machine No. 121826 D, Year of manufacture 1976 – Completely overhauled in 2003 Pressing force: 40 tons Throat depth: 225 mm Table opening: Ø 200 mm with support rim Ø 225 mm Table dimensions: 560 x 470 mm Ram area: 260 x 200 mm Adjustable ram stroke: 8–88 mm Ram adjustment: 63 mm Max. install height: 500 mm Clamping shank bore: Ø 40 mm Strokes per minute: 40–120 Motor power: 4 kW Power supply: 400 Volt, 50 Hz Table height above floor: 700–950 mm - Table height adjustment with 2 support spindles - Drop-through hole in table as round table opening with reduction ring from Ø 225 to Ø 100 mm Ijdpfx Aaexlkq Isbeih - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC run-through protection - Stroke release via electric footswitch or two-hand control console - Front crankshaft support bearing - Overload protection via shear plate - Manual central lubrication - Electrical cabinet with dual-circuit contactor control from 2003, permanently mounted on the machine - Safety standard (UVV) for manual loading/unloading The machine is equipped with the following operating modes: - Setup - Single stroke (two-hand) - Single stroke (foot) - Continuous run (foot) - Automatic continuous run - External engagement Required space (L x W x H): 1900 x 950 x 2600 mm Weight: 3.1 tons Very good condition

Condition: used, Year of construction: 1986, Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Iedpfsuqdqlex Aaboih Weight of machine approx.: 50 ton Standard configuration The press was completely overhauled mechanically, hydraulically and electrically in 2008.

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp Iijdpfsxlqxfex Aabsh - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (max.): 5,000 rpm, table length: 4,000 mm, table width: 2,000 mm, Sachman PX 120 Travelling column milling and boring machine with: - X-axis travel 6000 mm - Y-axis travel 1200 mm - Z-axis travel 2000 mm Iiodpev Acatsfx Aabjh - Heidenhain TNC 530 control unit - CNC rotary-translating table 2000 x 2000 mm - Stolle table 4000 x 2000 mm - KOSMO 3 automatic head 0.02° x 0.02° - 60-place tool magazine - chip conveyor - standard accessories Free extension in 12/24 months

Condition: like new (used), functionality: fully functional, Performance in ST 60: 50 mm Speed range, stepless: 60 – 1200 rpm Iedoxiyvnopfx Aabsih Motor power: 4 / 5.5 kW Short spindle: MK 5 5 drilling feeds: 0.1 - 0.14 – 0.2 – 0.28 – 0.4 mm/rev Weight approx. 1500 kg

Condition: ready for operation (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 1441, spindle speed (max.): 3,000 rpm, spindle speed (min.): 200 rpm, total height: 1,500 mm, total width: 560 mm, total length: 800 mm, table width: 240 mm, table length: 250 mm, overall weight: 250 kg, With 2 grooves, including frequency converter for stepless speed use. Isdpfsv Iqqdox Aabjih

Condition: ready for operation (used), Year of construction: 1989, Drilling capacity: 30 mm Spindle taper: MK 3 Table size: 300 x 300 mm Throat depth: 290 mm Drilling stroke: 120 mm Maximum distance between table and quill: 660 mm Infinitely variable spindle speeds: 160 – approx. 1000 rpm Drive motor: 1/1.3 kW Required space: 900 x 550 x 1750 mm Isdpfxoxlgxhe Aabeih

Condition: used, Year of construction: 2005, Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Die cushion capacity in table: 80 ton Ijdpjwnn Rtefx Aabeih Die cushion stroke: 250 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton Standard configuration 2 cushion cylinder 2 pads

Condition: new, The KB 20 SV is a state-of-the-art Column Drilling Machine in the KB SFV Series, designed for robust performance in any workshop setting. This high-quality drill press excels in light drilling tasks, featuring a modern design with a precision-ground work table and an infinity variable drive that is virtually maintenance-free. Equipped with a user-friendly touchscreen control panel, operators can easily switch between drilling and thread-cutting functions, which enhances productivity for both single part productions and manual series batch jobs. The machine includes a powerful, quiet motor and a reliable belt drive, ensuring superior rigidity and performance under high loads. Standard equipment such as an integrated LED work lamp, drill chuck, and tool-holder bits enhance usability. With a drilling capacity of 20 mm and sturdy construction, the KB 20 SV is an excellent choice for anyone looking to optimize their Column Drilling Machine operations. Order online today to experience the efficiency of KNUTH machines in your facility. Iijdsu E Ndujpfx Aabjh

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Iodpfeh U Nvkex Aabsih TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), Year of construction: 2003, Manufacturer: ROVETTA Year: 2003 Condition: Used Stock number: 0385 Isdpfxjxlh Rfe Aabeih Pressing force: 630 tons Number of connecting rods: 4 Slide stroke: 300 mm Slide adjustment: 250 mm Die clearance at BDC: 950 mm Strokes per minute: 15/65 Maximum front opening: 5,200 mm Table dimensions: 5,000 x 2,630 mm Slide dimensions: 5,000 x 2,630 mm Main motor power: 132 kW

Condition: used, Year of construction: 2003, x-travel 2.200 mm Iedpfxotumqvj Aaboih y-travel 560 mm z-travel 720 mm control iTNC 530 Heidenhain turning speed range - milling 20 ~ 12.000 U/min tool taper SK 40 power capacity - milling spindle 35 / 25 kW tool piece magazine with 100 pos. table surface area 2.600 x 600 mm rapid traverse X-axis 100 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg max. table load 2.200 kg total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 7,0 x 4,2 x 2,7 m Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - incl. 4th Axis 560mm and tailstock (center height 350mm)

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Iiedpfxjuqdi Uo Aabjh Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Condition: new, The KB 32 SFV PRO is a high-performance Column Drilling Machine from KNUTH, designed to deliver precision and efficiency for various drilling applications. This robust drill press features an automatic feed system and is particularly well-suited for single part productions and manual series work in both workshops and industrial settings. Made from premium high-quality cast iron, the sturdy base, column, table, and gear head ensure excellent rigidity and durability. The heavy, precision-ground work table is equipped with T-slots for optimal setup versatility. With an infinitely variable drive that boasts low maintenance, the KB 32 SFV PRO is complemented by a convenient touchscreen control panel. Operators can easily access functions such as spindle speed control and an electronically controlled quill feed. The integrated coolant system enhances performance, while the standard LED work light ensures optimal visibility. Experience the reliability of this drill press and enhance your operations—request a quote today to add the KB 32 SFV PRO to your drilling equipment lineup in the Column Drilling Machines category. Ijdpfxeuyh Uns Aabsih

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 6011, Used Soraluce FP-8000 Travelling Column Floor Type milling machine with HEIDENHAIN TNC430CA control and 60ATC Year of manufacture 2001 MACHINE CONSTRUCTION, FEATURES & FITTED OPTIONS • Travelling Column Floor Type Design. • High Performance Linear Guideways. • Orthogonal Auto Indexing Milling Head - 2.5° x 2.5° • X / Y / Z Linear Scales. • 2 off 800mm dimeter indexing tables without any top T slotted platens • Full Length Swarf Conveyor. • Operator’s Platform. TRAVELS – MAIN MACHINE Longitudinal Travel (X-Axis) - 8,000 MM Vertical Travel (Y-Axis) - 2,000 MM Ram Travel (Z-Axis) - 1,200 MM SPINDLE HEAD Iiedpfx Aeuv Hn Seaboh Spindle Nose Taper - BT-50 Pull Stud - MAS BT50 Type 2 Spindle Speeds - 2 Ranges - 11.4 ~ 230 & 923 ~ 3,000 RPM Spindle Power - 30.0 KW FEEDS Cutting Feedrate - 5 ~ 5,000 MM / MIN Rapid Traverse (X-Axis) - 15 M / MIN Rapid Traverse (Y-Axis) - 15 M / MIN Rapid Traverse (Z-Axis) - 15 M / MIN Feed Motor (X-Axis) - 57 NM Feed Motor (Y-Axis) - 27 NM Feed Motor (Z-Axis) - 27 NM ATC Tool Storage Capacity - 60 Station Chain Type Tool Shank - ISO-50 MOTOR Spindle Drive Motor - 30.0 KW POWER SUPPLY Voltage - 415V / 50HZ / 3PH SIZE AND WEIGHT Floor Space - 14500 X 6,500 MM Height - 5,250 MM Weight - 25,000 KGS

Condition: used, Year of construction: 1996, machine/vehicle number: 14.194, Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Ijdpfx Aaju Saaajboih Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Condition: new, The SSB 32 Xn Column Drilling Machine is an exceptional addition to the Drilling Machines product group, ideal for both repair and production tasks in any workshop. Designed by KNUTH, this robust machine features a thick-walled column and powerful gearboxes that ensure precise performance. With its versatile capacity to drill up to 32 mm and a spacious 500x420 mm worktable, it accommodates both small workpieces and larger assemblies effortlessly. The drill head can swivel ±45° for angled drilling, while the integrated coolant system enhances operational efficiency and longevity. Additional features include a digital display for accurate spindle speed monitoring, a protective shield for safety, and an LED work lamp for optimal visibility. The SSB 32 Xn's automatic drilling feed and various clamping options simplify operations. Experience the reliability and performance of KNUTH’s Column Drilling Machines by placing your order now. Iijdpjww T S Usfx Aabjh

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Iedpfx Aaeuv Hrdobjih Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: used, Pressure total: 500 ton Ram stroke: 500 mm Slide adjustment: 400 mm Iodpfx Aaownnanoboih Daylight: 1350 mm Table surface area : 3000 x 1700 mm Slide area: 3000 x 1700 mm Die cushion capacity in table: 80 ton Die cushion stroke: 250 mm Number of strokes: 20 s.p.m. Required power: 75 kW Height over floor approx.: 8000 mm Weight of machine approx.: 160 ton Standard configuration 2 cushion cylinder 1 pad

Condition: new, The TSB 35 is a robust and precise column drilling machine that stands out in the category of column drilling machines. Designed by KNUTH, this bench drill series is compact yet delivers high drilling performance suitable for a wide variety of applications, from steel construction to repair shops. The TSB 35 features a powerful spindle gearbox for high torque and an extensive speed range with 12 adjustable levels, allowing for a drilling capacity of up to 35 mm. The machine is built with a rigid cast-iron construction, ensuring stability during operation. Additionally, the drill head can swivel ± 45°, enabling angled drilling, while the automatic quill feed simplifies the process for larger drilling diameters. Equipped with standard features like a protective shield, LED work lamp, and a coolant system, this machine is a valuable asset for any workshop. To enhance your workshop’s capabilities with the TSB 35 column drilling machine, request a quote today. Iiodpfx Asqa Avfeabjh

Condition: used, Year of construction: 2005, Pressure total: 400 ton Ram stroke: 500 mm Iodpfxjwnpavj Aabeih Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton Standard configuration without cushion

Condition: new, The TSB 25 is a versatile Column Drilling Machine that offers impressive performance and compact dimensions, making it an ideal choice for any workshop, whether in steel construction or repair. As part of the KNUTH TSB bench drill series, this machine features a robust main spindle gearbox that provides high torque along with a wide speed range, accommodating various drilling tasks with ease. With a drilling capacity of 25 mm, a throat of 240 mm, and a spindle speed range of 125 to 2825 rpm, the TSB 25 is designed for efficiency. The swivel drill head allows for angled drilling, while the height-adjustable machine head ensures optimal usability. Additionally, standard equipment includes a base, protective shield, LED work lamp, and drill chuck, which enhance safety and convenience during operation. For those looking for a reliable and powerful Column Drilling Machine, the TSB 25 is an excellent choice. Request a quote today to learn more about this robust addition to your workshop. Iedpfx Aasqa Au Toboih

Condition: used, Year of construction: 2002, machine/vehicle number: 10857, Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Iedpfsvmfzbjx Aabsih Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm Automation

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Isdpsuqd Nusfx Aabjih Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Iijdsuqd S Aopfx Aabeh Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l