Used House Connection Column for sale (23,542)

Condition: good (used), Pressure: 25 t cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. ram stroke - max.: 20 mm Iiodpfxjfim Dwj Aabeh Table surface usable: WxD: 440 x 360 mm

Condition: new, Year of construction: 2025, neu 2025 070095 ca. 14 - 16 Wochen ab Auf Türkei 20100 € 385.92 € 10 to 1.4 mm 270 mm 370 mm 100 mm 1 - 40 mm 200 1/min 4 35 mm 25 mm 160 mm 180 mm 0.75 kW 1170 mm 1180 mm 1700 mm Iedswirqgspfx Aabjih 590 kg welded steel construction body frame 4-fold ram guide pneumatic clutch-brake combination photocell light barriers two hand and foot pedal control manual adjustable stroke manual central lubrication according to CE rules Options: vibrations pads € 132,- bolster plate € 220,- Photo shows the machine with optional bolster plate

Condition: used, Single-column hydraulic press HIDROLIKSAN model C-Type 100 Serial no. C100UT16/16 Year of manufacture: 2016 Pressing force: 100 tons Ram stroke: 400 mm Throat depth: 400 mm Daylight (installation height): 495 mm Table size: 900 x 700 mm Ram area: 900 x 700 mm Max. tool weight: 500 kg Table height above floor: 1,000 mm Max. hydraulic operating pressure: 240 bar Hydraulic tank capacity: 180 liters Rapid approach speed: 30 to 100 mm/sec Pressing speed: 3 to 10 mm/sec Return speed: approx. 100 mm/sec Drive power: 11 kW Power supply: 400 V, 50 Hz - Table and ram with 18 mm T-slots - Operation via two-hand control console or manual control - SIEMENS S7 1200 control with Simatic HMI touch panel - SICK Flexi Soft safety control - SICK light curtain as reach-in protection in safety mode - Programmable ram stroke, pressing force, and stroke speed via control - Pressure and position shut-off - Pressure holding time infinitely programmable - Ram equipped with direct linear measuring system - Electrical control cabinet mounted on machine frame Iodpfx Ajxf Uqreabsih - Hydraulic oil cooler with fan motor (oil-air cooling) - Approx. 2,496 operating hours - UVV safety for manual loading, last inspection October 2024 Required installation space (L x W x H): 2,300 x 1,700 x 2,750 mm Weight: 8 tons Very good condition

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available Iiodpfxovuukuo Aabsh

Condition: new, pressure 28 t throat 225 mm stroke 150 mm Iisdpfxeg Igpns Aabeh table surface area 325 x 300 mm work speed 2 - 9,8 mm/sek return speed 12,8 mm/sek total power requirement 4 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools

Condition: ready for operation (used), An old pillar drilling machine Gillardon is available. Drilling capacity steel/cast iron: 32mm/40mm, quill stroke: 140mm, spindle taper: MK3, speed: 2800rpm, column diameter: approx. 115mm, throat depth: approx. 250mm, drill table dimensions X/Y: 400mm/400mm, weight: approx. 300kg. An on-site inspection is possible. Iodpfx Asxnp Svsabsih

Condition: new, The SSB 50 F Super VT, a robust Column Drilling Machine from KNUTH, is expertly designed for precision drilling, countersinking, reaming, and tapping in various settings, from maintenance tasks to industrial construction. This drill press features a sturdy construction with a thick-walled column and a large throat, ensuring stability and reliability during operation. With its advanced touchscreen control panel, users can easily select the necessary operating parameters, while the infinitely variable spindle speed allows for flexibility in machining. The motorized vertical movement of the setup table simplifies the handling of heavy parts, making it ideal for custom and small-series machining. Standard equipment includes a powerful LED work lamp, a coolant device, and an automatic quill feed. For those looking for a high-quality Column Drilling Machine, the SSB 50 F Super VT is an excellent choice. Request a quote today to learn more about this exceptional machine! Iodpfx Asnp Hp Ieaboih

Condition: used, Year of construction: 2004, x-travel 3.600 mm y-travel 920 mm Iedpfx Aountmqeabjih z-travel 820 mm Control 840D pl ShopMill Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 Nm tool taper HSK-A63 swivellable B: +/- 100 ° table surface area 4.200 x 900 mm max. table load 4.200 kg T-slots 9x 18H7 x 100 number of toolpositions 130 ( 120 +10 ) pos. tool taper HSK-A63 max. tool diameter 50 mm max. tool weight 6,0 kg max. tool length 200 mm rapid traverse ( X / Y / Z ) 100 / 50 / 50 m/min feed speeds max. 20.000 mm/min total power requirement 92 kVA weight of the machine ca. 17,0 t dimensions of the machine ca. 11,0 x 5,5 x 3,0 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 360 linear - 5 Axis ( NC-Swivel-Milling-Head & LEHMANN - EA 430.2A ) - moveable tailstock - separated WorkingTable - internal Coolant-System - 120-pos. Tool-Magazine incl. cleaning-unit - 10 additional pos. for oversized tools - Machine equipped with increased accuracy

Condition: new, Year of construction: 2025, Continuous/standard drilling capacity 15/18 mm (in E335/St60) 17 Nm Tapping capacity M12 (pitch-dependent) Spindle taper MK II Drilling depth 70 mm Throat 220 mm Iisdjxgdn Ajpfx Aabsh Max. distance spindle/work surface: 750 mm Column diameter 70 mm Usable work surface W x L 300 x 250 mm T-slot size (arm), spacing (mm), width (mm) Number 2, 125, 14/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: adjustable stop ring Feed: manual Table height adjustment: hand crank/rack and pinion Motor, three-phase 230V with Quefren frequency inverter: 0.75 kW Spindle speed: 40–4,000 rpm Machine dimensions: 420 x 540 x 1,780 mm Weight: 88 kg Optional Accessories Drill package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-action drill chuck 3–16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 €490.00 Factory warranty: 3 years Free delivery including packaging (within Germany only) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT DISTRIBUTION PARTNER AND CAN OFFER YOU THE COMPLETE FLOTT PRODUCT RANGE! REQUEST A QUOTE!

Condition: used, Year of construction: 1980, pressure 400 t distance between columns 3250 mm distance table/ram, max. stroke up, adjustment up 1000 mm stroke 800 mm table surface area 3250 x 1400 mm table height over floor 1250 mm die cushion capacity 170 t die cushion stroke 200 mm die cushion area 1800 x 1000 mm distance between cutting impact cushioning 2610 mm side window 800 mm ram surface 3250 x 1400 mm return capacity 51 t speed down 300 mm/s speed up 300 mm/s working speed 16 - 33 mm/s quantity of oil 2900 l power requirement 100,0 kW weight 70,0 t Dimensions (WxDxH) 4,9 x 3,1 x 7,6 m permitted for manual loading according to the German Safety Regulations (UVV) Iodsvuk S Ijpfx Aaboih with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard (Sick) on front and back, hydraulic drawing cushion in table (controllable), hydraulic cutting impact cushioning with motoric adjustable depth stop, hydraulic ram interlocking, two-hand operation as is where is, WITHOUT putting into operation

Condition: new, neu Oktober 2025, Zwischenver Türkei 70700 € 1336.23 € 100 to 600 mm Iedpfew Dvkgex Aaboih 900 x 500 mm 800 mm 400 mm 220 mm/s 1 - 20 mm/s 250 mm/s 14,65 kW 1900 mm 1700 mm 4400 mm 6000 kg 30 - 239 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Cooler Siemens electrical components 8 additional signal inputs and outputs 10-inch touchscreen PLC Siemens S7 1200 Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or SickTwo-hand control panel Reset and emergency stop buttons Equipped according to CE regulations

Condition: used, Year of construction: 1988, Pressure 315 t distance between columns 1350 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1200 x 1300 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm speed down 750 mm/s speed up 680 mm/s Ijdpfx Aovuk Rqoabsih working speed 180 mm/s oil volume 2000 l power requirement 150,0 kW weight 35,0 t Dimensions (WxDxH) 3,3 x 3,3 x 5,5 m height over floor 5,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning with depth stop (motorized adjustment), hydraulic ram interlocking as is where is, WITHOUT putting into operation

Condition: new, Year of construction: 2025, neu 2025 070126 November 2025, Zwischenve Türkei 48500 € 926.35 € 60 to 3.5 mm 500 mm 700 mm 190 mm 1 - 100 mm 65 1/min 4 70 mm 45 mm 260 mm 365 mm 5,5 kW 1250 mm 1350 mm 2400 mm 3500 kg welded steel construction body frame 4-fold ram guide pneumatic clutch-brake combination fully closed gearbox working in oil bath photocell light barriers Iedswwwtispfx Aaboih mechanical overload protection two hand and foot pedal control manual adjustable stroke automatic central lubrication according to CE rules OPTIONS: vibrations pads bolster plate picture incl. optional available bolster plate

Condition: used, Year of construction: 1993, pressure 500 t distance between columns 2240 mm stroke 1180 mm distance table/ram, max. stroke up, adjustment up 1800 mm Iijdsvuk I Nopfx Aabsh table surface area 2050 x 1800 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 380 mm drawing cushion surface in table 1800 x 1200 mm pressure of drawing cushion in ram 122 t stroke of drawing cushion in ram 200 mm drawing cushion area in ram 1800 x 1200 mm ram surface 2215 x 1800 mm table height over floor 500 mm speed down 400 mm/s speed up 10 - 400 mm/s working speed 10 - 100 mm/s depth of the foundation 3,0 m power requirement 122 + 75 + 64,5 kW weight 110,0 t Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m height over floor 6,8 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram, cutting impact cushioning, ram interlocking Foundation depth approx. 3,0 m press is currently under revision with control Siemens S 7 / safety control Pilz a sister machine can be offered in as is where is condition, partially disassembled

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 59800 € 1130.22 € 100 to 400 mm 800 x 500 mm 500 mm 110 mm/s 10 mm/s 160 mm/s 11 kW 1900 mm 1700 mm 2930 mm 5500 kg 250 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides T-slots can be configured according to customer requirements Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Hydraulic proportional valve Cooler Siemens electrical components 8 additional signal inputs and outputs 7-inch touchscreen Siemens S7 PLC Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or Sick Category 4 sensors and photoelectric switch Iiodowmwvcopfx Aaboh Two-hand control panel Reset and emergency stop buttons Equipped according to CE regulations

Condition: used, Year of construction: 1965, pressure 160 t stroke 15 - 170 mm no. of strokes 15 - 40 /min distance between columns 2050 / 1900 mm dayligth (stroke and adjustment up) 690 mm column travel -side 800 mm table surface area 1600 x 800 mm table height over floor 900 mm ram surface 1620 x 700 mm ram adjustment 140 mm power requirement 15,0 kW Weight 24,0 t dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm total height over floor 4,8 m height under floor 0,5 m Iodpfx Aovuk S Usabeih permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 91200 € 1723.68 € 100 to 500 mm 600 x 900 mm 700 x 1100 mm Iiodpfxowir Dgj Aabeh 750 mm 320 mm 100 mm/s 8,5 mm/s 165 mm/s 11 kW 2100 mm 1900 mm 3350 mm 7300 kg 240 bar 30 to 200 mm 120 mm 170 bar 52 mm/sec. 700 x 400 mm 2-hand control Control over SPS Adjustable die cushion stroke Lubricant-free ram guide light barriers User Manual in German according to CE rules

Condition: used, Year of construction: 1959, pressure 063 t throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 550 mm table surface area 630 x 500 mm hole in the table 230 mm table height over floor 740 mm Iodpfx Aaovuk Rwebjih table adjustable 200 mm ram surface 320 x 260 mm ram adjustment 63 mm power capacity 5,5 kW weight 4,6 t Dimensions (WxDxH) 1,4 x 1,8 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual centralized lubrication, two-hand operation Press is currently under revision

Condition: new, neu ca. 4 Monate ab Auftragse Italien 172500 € 3260.25 € 300 to 500 mm 1250x1000 mm 600 mm 22 mm/s 2 mm/s 7.5 kW 1750 mm 1500 mm 2800 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Iiedpfxewir Acj Aabeh Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request

Condition: used, Year of construction: 1980, pressure 50 t distance between columns 1750 mm stroke 500 mm Distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1700 x 750 mm table height over floor 800 mm side window 650 x 750 mm Iijdpfx Aaevuk Ngebsh ram surface 1700 x 750 mm power requirement 11,0 kW weight 11,0 t Dimensions (WxDxH) 2,1 x 1,15 x 3,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way No foundation pit necessary can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: new, Year of construction: 2024, neu 2024 7305 prompt, Zwischenverkauf v Italien 46400 € 886.24 € 1 100 to 500 mm 700 x 350 mm 800 x 600 mm 500 mm 300 mm 25 mm/s 4 mm/s 4 kW 1900 mm 1200 mm 2600 mm 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch OPTIONS: time of delivery with options 2 - 3 months from order 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,- Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € 9.000,- Working hour counter € 400,- Stroke counter € 400,- Deompression valve € 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch € Iisdjwiry Ispfx Aaboh incl.

Condition: used, Year of construction: 1989, pressure 100 t distance between columns 1060 mm stroke 700 mm distance table/ram, max. stroke up, adjustment up 1250 mm table surface area 1000 x 700 mm pressure of drawing cushion in table 40 t stroke of drawing cushion in table 200 mm die cushion area Ø 250 mm table height over floor 950 mm side window 580 x 750 mm ram surface 1000 x 700 mm oil volume 700 l power requirement 47,0 kW weight 13,0 t Dimensions (WxDxH) 2,2 x 1,8 x 5,0 m Iijdevuk Najpfx Aaboh permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, ejector in ram, mechanical depth stop (motoric adjustable), ram interlocking (SITEMA) can be offered without putting into operation or alternatively with new control Siemens S7-1500F

Condition: used, Year of construction: 1981, pressure 080 t throat 345 mm stroke 8 - 112 mm Stroke rate 65 / min Distance table/ram, max. stroke up, adjustment up 472 mm Table surface area 840 x 610 mm Hole in the table 280 / 315 mm Table height above floor 800 mm Isdpfx Aovuua Ajabjih Passage to the back 500 mm Ram surface 650 x 400 mm Ram adjustment 70 mm Power capacity 7,5 kW Weight 6,8 t Dimensions (WxDxH) 1,2 x 1,95 x 3,05 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, pneumatic clutch-brake combination, hydraulic overload protection in ram, manual stroke adjustment, manual ram adjustment, pneumatic counterbalance in ram, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1978, pressure 063 t throat 450 mm stroke 8 - 100 mm no. of strokes 65 /min distance table/ram, max. stroke up, adjustment up 415 mm table surface area 720 x 800 mm hole in the table 280/250 mm table height over floor 800 mm passage to the back 290 mm ram surface 450 x 280 mm ram adjustment 63 mm power requirement 7,5 kW weight 4,7 t dimensions (WxDxH) 1,3 x 2,0 x 2,65 m Isdpfxsvzxn Dj Aabsih year of manufacture 1966 - modernized 1978 permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with pneumatic clutch, mechanical overload protection in ram as is where is, partly dismantled, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 2008, pressure 200 t distance between columns 1050 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up 450 mm table surface area 1000 x 1200 mm table height over floor 850 mm side window 500 mm ram surface 1050 x 870 mm speed down 300 mm/s speed up 300 mm/s working speed 18 - 36 mm/s power requirement 37,0 kW weight 16,0 t dimensions (WxDxH) 4,0 x 3,6 x 3,4 m year of manufacture 1988 - 2008: NEW control Siemens S 7 permitted for manual put-in according to the CE Regulations Ijdpfovut Niex Aabsih with oil-hydraulic drive, hydraulic cutting impact cushioning, two-hand operation No foundation pit necessary can be offered without or with putting into operation in given condition