Used Hydraulic Part for sale (15,072)

Condition: good (used), mileage: 1,11,669 km, power: 368 kW (500.34 HP), first registration: 05/2020, fuel type: diesel, axle configuration: 6x2, wheelbase: 29,500 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, airbag, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, power assisted steering, retarder, seat heater, second fuel tank, = Further options and accessories = - Bluetooth - Speed limiter - Air conditioning - Air-suspended seats - Reversing camera - Sleeper cab - Side skirts - Warm-up automatic system - Xenon lighting = Further information = Brakes: Disc brakes Suspension: Air suspension Knjdpfx Asxr Upbodbsd Front axle: Max. axle load: 8,000 kg; Steered; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 1: Max. axle load: 11,500 kg; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 2: Differential lock; Max. axle load: 7,500 kg; Tyre tread left: 70%; Tyre tread right: 70% Technical condition: Very good Damages: None Contact Job van Eldik for further information.

Condition: used, mileage: 3,49,661 km, power: 368 kW (500.34 HP), first registration: 06/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 3,150 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2020, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, traction control, = Additional options and accessories = - Differential lock Knsdpextfwlsfx Adbod - Electrically foldable exterior mirrors - Remote-controlled central locking - Lift axle - Air suspension - PTO (Power Take-Off) - Radio - Disc brakes - Sun visor - Spotlights - Lane departure warning system - Auxiliary heater = Remarks = Scania G500 A6x2*4NB Lift steering axle. Engine PTO. Hydraulic system with oil cooler. 3 hydraulic connections. 24V NATO plug. = Further information = Technical details Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steered; Left tire tread: 70%; Right tire tread: 70% Rear axle 1: Tire size: 315/70R22.5; Left tire tread: 70%; Right tire tread: 70% Rear axle 2: Tire size: 385/65R22.5; Steered; Left tire tread: 70%; Right tire tread: 70% Weights Unladen weight: 9,550 kg Payload: 16,450 kg Gross vehicle weight: 26,000 kg Maintenance APK (vehicle inspection): valid until 07/2026 Identification Type number: G500 A 6x2*4 / LIFT STEERING AXLE = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB); Wouter Greutink (NL-DE-GB-ES-IT); Govorim po russki. We make every effort to provide correct information, but no rights can be derived from the provided texts.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 4203773681008, table length: 1,400 mm, table width: 600 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the machine within the specified period from 28/07/2025 to 31/07/2025. Ksdewvi N Tjpfx Adbjnd TECHNICAL DETAILS Table dimensions: 1,400 x 600 mm Motor: 11.4 kW MACHINE SPECIFICATIONS Overall width: 2,500 mm Overall length: 2,200 mm Overall height: 2,000 mm Total weight: 1,500 kg Operating voltage: 380 V Frequency: 50 Hz Rated current: 25 A Control voltage: 220 V with transformer Auxiliary voltage: 24 V Breaker rated short-circuit current: 0.165 kA Documents and Numbers Control number: 42037.301.01.00 Wiring diagram: 42037.301.01.01 Serial number: 42037.736.81.008

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, working width: 4,050 mm, cutting angle (min.): 2 °, cutting angle (max.): 10 °, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Sheet width: 4,050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Electric back gauge: 1,000 mm MACHINE DETAILS Machine weight: approx. 10,100 kg EQUIPMENT Kedpfxoxxr H Rs Adbond Support arms for material Sheet lifting device Scrap container Cutting gap and angle adjustment via the control system

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. Knodpfxsq Nd Rbs Adbsd 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Year of construction: 2018, condition: ready for operation (used), General Data Measurements height 2650 mm Dimensions Machine Length 3400 mm Main Drive Pressing force 784.53 Kn Number of axis 4 Knjdpfx Aexx Du Hedbed Movement X-Axis Movement 500 mm This 4-axis HILALSAN Cap 2080 hydraulic press was manufactured in 2018. It features a pressing force of 80 tons, a bending width of 2600 mm, and motor power of 7.5 kW. The machine includes a stroke length of 205 mm and a throat depth of 310 mm. If you are looking to get high-quality bending capabilities, consider the HILALSAN Cap 2080 machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: repair required (used), Table size: 2900 x 1200 mm Folded size (without legs: )420 mm Opened size: (without legs): 1700 mm without hydraulic unit! Quantity: 1 pc Kjdpjik Hbzofx Adbend Price/pc

Condition: ready for operation (used), Hydraulic Press, HARE 6 HP, Used Machine Manufacturer: Hare Model: 6 HP Overall Dimensions: Width: 960 mm Depth: 1160 mm Height: 2000 mm Table Size: 570 x 290 mm Stroke Length: 100 mm Clearance: 460 x 290 mm Knodsxxiybepfx Adbsd Working Pressure: 6 tons (60 kN) Year of Manufacture: 2005 Electrical Data: 400V; 3 kW Air Pressure: 5.5 bar Weight: 620 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 380 mm, side roll diameter: 300 mm, working width: 3,100 mm, sheet thickness (max.): 25 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT * The lower, upper and side rolls move up and down linearly, operated by hydraulic pistons connected to the frame * Protected against overloading * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven) * The positions of the rolls can be easily read via three digital displays * Rolled parts can be easily removed with hydraulically opening head and automatic lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) Knsdpfsxw Ecvox Adbsd * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) to support large-diameter bending * Hydraulic side supports to assist with large-diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending Capacity : 16/20 mm Bending Capacity : 20/25 mm Top & Bottom Roll Diameter : 380 mm Side Roll Diameter : 300 mm Motor Power : 31.5 kW Bending Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 19,200 kg

Condition: used, Year of construction: 1986, - incl. various bending tools - year of manufacture: 1986 Specifications - Capacity: 800 kN - Bending length: 2550 mm - Throat depth: 250 mm Knedpsxdc A Hsfx Adbjd - Passage: 2050 mm - Stroke: 140 mm - Stopping time: 140 ms - Backgauge travel: 600 mm - Operating pressure: 300 bar - Motor power: 5.5 kW - Operating voltage: 400 V - Dimensions (W x H x D): approx. 3400 x 2600 x 1300 mm - Weight: 4800 kg

Condition: new, sheet length: 4.000sheet thickness: 20,0cutting area width: 4000total power requirements: 22weight approx.: 20000messurements (LxWxH): 4850 x 2300 x 2180 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Ksdoxxd D Uepfx Adbend Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,200 h, Injection Unit Screw diameter 60 mm Injection pressure 2006 bar Clamping Unit Clamping force 200 tons expandable to 300 tons Opening stroke 700 mm Mould height max 350 mm Additional Equipment Kodpfx Ajw Ailbodbond Hydraulic ejector Side air valve Robot interface 4-zone mold temperature control system This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Hydraulic power unit, 350 Bar, used machine Manufacturer: Barabás Engineering Office Ltd. – Bridge lifting power supply Model: PHHET Overall Dimensions: Ksdpfxoxxixqo Adbjnd Width: 1260 mm Depth: 800 mm Height: 1560 mm Weight: 620 kg Year of Manufacture: 2017 Electrical Data: 3×400V / 230V, 50Hz, 11 kW Operating Pressure: 350 bar

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, working width: 2,550 mm, sheet thickness (max.): 40 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT * Upper, lower, and side rolls are linearly moved up and down by hydraulically actuated pistons attached to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotors and planetary reducers (3 roll motor drive) * The position of the rolls can be easily read with three digital indicators * The hydraulically opening head and the automatically lifting shaft allow the bent part to be removed easily * Very easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280-320-350-380-400-460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll Diameter: 400 mm Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17,800 kg Kodpfx Adjxw Ebxsbjnd

Condition: used, Year of construction: 2001, - Year of manufacture: 2001 Specifications - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Strokes per minute: 10 - Oil tank: 410 l - Motor power: 37 kW - Operating voltage: 400 V - Rated current: 72 A Kedpfx Adjxa Aclobend - Main fuse rated current: 100 A - Dimensions (W x H x D): 3750 x 2400 x 3425 mm - Weight: 13800 kg

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 8500messurements (LxWxH): 4650 x 1700 x 1800 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel Kjdpfx Ajd Ab Hhedbjnd  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 4700 kg Control Unit Knjdjxx Dx Espfx Adbed Brand AMADA Main Drive Pressing force 500 kN Stroke 200 mm Number of axis 8 This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Application Types Bending

Condition: ready for operation (used), Hydraulic Press, HARE 6 HP, Used Machine Kjdexxikyopfx Adbond Manufacturer: Hare Model: 6 HP Overall Dimensions: Width: 940 mm Depth: 1110 mm Height: 2000 mm Table Size: 570 x 290 mm Stroke Length: 100 mm Clearance: 470 x 240 mm Working Pressure: 6 tons (60 kN) Year of Manufacture: 2005 Electrical Data: 400V; 3 kW Air Pressure: 5.5 bar Weight: 620 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 240 mm, working width: 2,050 mm, sheet thickness (max.): 25 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT * The lower, top, and side rolls move linearly up and down via hydraulic pistons fixed to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * Roll positions are easily readable via three digital indicators * Easy removal of the bent workpiece thanks to the hydraulically opening head and the automatically ascending shaft * User-friendly operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system Ksdpfsxw Eblex Adbend * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Infinitely variable speed control system * Electronic balancing system for parallel movement of shafts (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 2050 mm Pre-bending : 16 / 20 mm Bending : 20 / 25 mm Top & Bottom Roll : 320 mm Side Roll : 240 mm Motor Power : 20 kW Bending Speed : 1.5 - 5 m/min Length : 4350 mm Width : 1800 mm Height : 1950 mm Weight : 10,500 kg

Condition: new, Shaft diameter: 180Upper Roll Diameter: 60Bottom Roll Diameter: 50working speed: 5motor power: 3length: 1200width: 850heigth: 1200weight approx.: 1000 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35 Kneded Ab H Njpfx Adbed         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Year of construction: 2021, condition: ready for operation (used), General Data Measurements height 2850 mm Dimensions Machine Length 3950 mm Control Unit Brand DELEM Model DA-58 Main Drive Bending length 3100 mm Pressing force 220 Kn Number of axis 2 This HILALSAN ULTIMATE CAP-3220 hydraulic press was manufactured in 2021. It features a pressing force of 220 tons, a bending length of 3100 mm, and is equipped with a Delem DA-58 controller. With a stroke length of 265 mm and a throat depth of 410 mm, it offers robust performance for precise operations. Consider the opportunity to buy this HILALSAN ULTIMATE CAP-3220 hydraulic press. Contact us for more information about this machine. Kedpfjxwqr Aex Adbsnd Application Types Bending

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (top) diameter: 180 mm, side roll diameter: 150 mm, working width: 1,550 mm, sheet thickness (max.): 9 mm, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT - Highly suitable for bending light and medium sheet metal, as well as aluminum or stainless steel materials Kodpfx Ajxw Eanodbond - Ideal for rolling materials into round shapes and various diameters - Lower roll and side rolls operate via direct linear hydraulic up/down movement - Protected against overloading - Upper roll driven by electric motor and planetary gearbox. Lower roll driven via cardan coupling system. Two rolls feature powered rotation - Roll positions easily read via three digital indicators - Rolled part can be easily removed thanks to hydraulically opening head - Very easy operation with mobile control panel - Welded steel construction body - SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts - Cone bending device - Hydraulic balancing system for parallel movement of the rolls - Conforms to EU safety standards and CE marked - User manual OPTIONAL EQUIPMENT - Remote assistance via NC control - Upper crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Dual-speed adjustment system - Infinitely variable speed adjustment - Rotation powered by hydromotor - Extraction system TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-bending: 5/7 mm Bending: 7/9 mm Upper & Lower Roll: 180 mm Side Roll: 150 mm Min. Bending Diameter: 270 / 900 mm Motor Power: 4 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 3350 mm Width: 1350 mm Height: 1290 mm Weight: 2900 kg

Condition: new, Year of construction: 2025, number of rollers: 4, roller (top) diameter: 180 mm, side roll diameter: 150 mm, working width: 2,050 mm, sheet thickness (max.): 8 mm, STANDARD EQUIPMENT - Ideally suited for bending light to medium gauge steel, aluminum, or stainless materials - Perfect for bending round and various diameter materials - Lower roll and side rolls move up and down hydraulically with direct linear motion - Protected against overload - Top roll driven by electric motor and planetary gearbox; lower roll driven by cardan shaft coupling system; two rolls are power-driven - Roll positions can be easily read via three digital displays - Hydraulically opening head allows for easy removal of bent parts - Movable control panel ensures very easy operation - Welded steel construction frame - SAE 1050 (CK45) induction-hardened forged or rolled steel shafts - Conical bending system - Hydraulic balancing system for parallel movement of the rolls - Compliant with EU safety standards and CE certified - Operating manual included OPTIONAL EQUIPMENT - Remote assistance with NC control - Top crane (elevator) for supporting large diameter bending - Hydraulic side supports for assisting large diameter bending - Ground and polished rolls - Dual speed adjustment system - Infinitely variable speed control - Rotation driven by hydraulic motor - Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 4/6 mm Bending: 6/8 mm Top & Lower Roll: 180 mm Side Roll: 150 mm Min. Bending Diameter: 270 / 900 mm Motor Power: 4 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 L Length: 3850 mm Width: 1350 mm Height: 1290 mm Knjdpfx Adoxw Eahsbod Weight: 3300 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox Knedpfxsxw D Udo Adbjd - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: new, Year of construction: 2025, control type: NC control, degree of automation: automatic, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 180 mm, side roll diameter: 150 mm, working width: 2,550 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulic up/down movement for rear and lower rolls Precision bending with braked main motor Cone bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear roll ball system for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls made from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) User manual OPTIONAL EQUIPMENT Top crane (elevator) for support in large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves on journal ends NC control unit Knjdjxw D Tmopfx Adbsd Dual speed operation Stepless speed adjustment Ejector system Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll: 180 mm Side Roll: 150 mm Min. Bending Diameter: 270 / 900 mm Motor Power: 4 + 1.1 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4350 mm Width: 1100 mm Height: 1290 mm Weight: 3070 kg