Used Hydraulic Test Bench for sale (27,967)

Condition: used, Year of construction: 2008, operating hours: 8,470 h, Serial number: n7da2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21240 Specifications: 2008 model 8,470 engine hours 136 kW Operating weight: 25,810 kg Track width: 60 cm Machine width: 319 cm Undercarriage: poor condition Minor leakage on bucket cylinder Gjdjw Ucmzepfx Aabokc Digging bucket Hydraulic grading bucket (well used) Track control S70 quick coupler Extra hydraulic outlets Lights Air conditioning Radio Ready for delivery Description:We have a 2008 New Holland E265B excavator for sale, equipped with digging bucket and hydraulic grading bucket.There is minor leakage on the bucket cylinder and the undercarriage is in poor condition. Defects and wear are present, and repairs should be expected.All services have been carried out every 400 hours by the owner. The machine is ready for delivery. Hours: 8470 Own weight: 25810 Width: 319 Kw: 136 Model: Kobelco E265B

Condition: used, Year of construction: 2015, 2015 | MAN TGX 18.480 4x2 BLS WITH TIPPER HYDRAULIC AND GOOD TIRES | Used Tractor Unit | 396459 kms 📍Location: Germany, Heusweiler 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 28 inspection points 28 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The MAN truck was in good condition at the time of the inspection, however, most of the tires need to be replaced. The rear left mudguard is torn off. Unfortunately, the trailer could not be detached, which limited the inspection of the truck. Tilting the driver's cabin was not possible due to the lack of tools, so an inspection of the engine could not be performed. The truck is equipped with a double-acting hydraulic system with two lines and an additional pump designed for a Walking Floor. The total height with the cabin spoiler mounted is 3.9 m. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31325 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Gkjdpfsxlvl Dox Aaboc

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 4050 mm Measurements depth 9200 mm Injection Unit Screw diameter 70 mm Stroke volume 1077 ccm Injection pressure 2200 bar Clamping Unit Clamping force 5000 kN Distance between bars 920 mm Additional Equipment Godpfxoxlvazo Aabskc Plus Peripherals: 8x Temperature Control Unit Thermo 5 / Robot: KUKA KR30-3 This Arburg Allrounder 920 S 5000-2100 was manufactured in 2017. It's a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Consider the opportunity to buy this Arburg Allrounder 920 S 5000-2100 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: like new (used), Year of construction: 1991, total height: 987 mm, total width: 505 mm, total length: 735 mm, throat depth: 125 mm, pressing force: 3 t, table width: 410 mm, table length: 320 mm, operating speed: 47 mm/s, oil tank capacity: 6 l, input voltage: 200 V, for sale in new condition ATSUGI 3 ton Hydraulic Press Atsugi Model AP-3-M Used load range: 6-30 (kN) Stroke: 150mm Down speed: 46.7 (mm/s) Up speed 56.7 (mm/s) two-handed operation mobile workbench Operating area: Open height: 250mm open depth: 125mm table size: 410x320mm Motor specification 3 phase AC200V 4P 1.5KW two-handed operation . mobile workbench Operating oil / quantity: 6 Liter Total weight (kg) 200 Gkodpfx Asv Sd Anjabjc Body size ​ Height (mm) 987 width (mm) 505 Depth (mm) 735

Year of construction: 2013, condition: used, This CTS temperature test chamber is being auctioned in our industrial auction/machinery auction as part of the Siemens ST laboratory closure – lab equipment, laboratory machines, materials, in an online auction. Gjdpfsxlgupsx Aabekc You can find this and many other items on our platform.

Condition: used, Year of construction: 1996, Lot consists of: (77) Hydraulic Tire Curing Presses Gksdpfxjxfz E Ns Aabjc

Condition: good (used), functionality: fully functional, machine/vehicle number: 151/6, Hydraulic Straightening Press Manufacturer: WALTER Type: WP Machine No.: 151/6 The press has a table size of Length Width Thickness Gkedpfx Aoxl Tmfeaboc 1000 390 60 mm Cylinder stroke: 400 mm The current distance between cylinder and table is 450 mm. When the table adjustment is set to the lowest notch, the gap between table and cylinder is 850 mm. (See the attached sketch for details) The machine is also equipped with an appropriate control system. Max. Pressing force: 60 tons 180 bar Table height adjustment approx.: 1000 mm (installation dimension) Motor power: 4 kW Two-hand control Emergency stop Foot pedal Stroke limitation via limit switch

Condition: new, Year of construction: 2025, The W16 table drill is characterized by a rigid structure and great performance while maintaining small size. It has threading functions and a swivel work table with adjustable height. It is a machine that combines power and precision, which is important in various applications. Machine description Threading function Automatic change of the direction of spindle rotation during threading Manual change of direction of rotation using a foot lever High spindle stiffness Setting the required drilling/tapping depth The drive is transmitted via a belt transmission Height-adjustable work table, tiltable from -45° (left) - +45° (right), with the ability to rotate 360° on the column The base is equipped with 14 mm wide T-slots The belt transmission cover is equipped with a safety limit switch No vice included! Technical parameters Max. drilling diameter 16 mm Max. spindle quill extension 100 mm MK2 spindle cone Spindle speeds 480, 800, 1400, 2440, 4100 rpm The distance of the spindle axis from the column is 193 mm Table dimensions 200x230 mm Base dimensions 528x360 mm Max. distance of the spindle tip to the table 315 mm Max. distance of spindle tip to base 556 mm Table rotation range in the horizontal axis ±45° Table rotation range around the column is 360° Motor power 750 W / 400V Weight 90 kg Included: B18 self-clamping drill chuck Gkjdpjrif Iuofx Aabec MK2 drill chuck shank

Condition: ready for operation (used), Year of construction: 2002, operating hours: 70,000 h, Control Unit Brand KRAUSS MAFFEI Main Drive Number of axis 3 Godpfx Aajxlu Uqsbjkc Injection Unit Screw diameter 90 mm Injection pressure 1742 bar Clamping Unit Clamping force 800 kN Additional Equipment Hydraulic pulley: 4 Case service: 5x hydraulic, 8x pneumatic Robot type: Remak RD30CNC Crane runway: 50000 kN Distance from crane to boom with chain: > 2150 mm This 3-axis Krauss Maffei 800-5000MC4 was manufactured in 2002. It features a clamping force of 800 kN, a screw diameter of 90 mm, and a maximum shot volume of 2863 cc. The machine includes a Remak RD30CNC robot and supports a crane runway capacity of 50,000 kN. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 800-5000MC4 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), functionality: fully functional, overall weight: 800 kg, Year of construction: 1995, pressing force: 10 t, operating speed: 260 mm/s, stroke length: 200 mm, table length: 440 mm, table width: 430 mm, type of input current: AC, Equipment: safety light barrier, Manufacturer JAM Model HYP-1000 Model year 1995 Capacity 98KN (10t) Stroke 200mm Nyitott magasság: 395mm asztal méret 440 × 430mm Shock hole φ32 × 60L mm ram aproaching speed:260 mm/s ram pressure speed:19 mm/s ram return speed: 219mm/s With light safety device voltage 3-phase 200v 1,5kw press body mass: 800kg operation oil: 43liter ​ Height (mm) 1395 Width (mm) 700 Depth (mm) 1170 Gkedpfxewcqc Ue Aabjc

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard Gkjdopvk Dijpfx Aabsc 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor Gkjdjxl Rz Tspfx Aabjc -Manufacturer: Sauer Danfoss, hydraulic motor -Type: OMP 160 151-0025 6 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 1x unit available -Dimensions: 225/130/H120 mm -Weight: 7.5 kg

Condition: used, Year of construction: 2018, Serial number: W09S3L330J0D4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21508 Specifications: 3 axles Lift on axle 1 Steering on axle 3 Lower deck length: Approx. 8.97 m Upper deck length: Approx. 4.3 m Decent tires Air suspension Hydraulic loading ramps Extendable Manual widening Toolbox Max payload: 39,265 kg Ready for delivery Description:Doll machine semi-trailer from 2019 in good condition.The trailer is EU-approved and ready for delivery.It is equipped with hydraulic loading ramps, manual widening, and extendable deck. Technical approved: Yes EU-approved until: 09.03.2026 Gkjdpfx Asxlx Tdoabec Own weight: 11635 Total Weight: 50900 Payload: 39265 Width: 255 Length: 1355 Model: Doll Maskinsemi m/ Bredding og Hydrauliske bruer

Condition: used, Huda Technology HUD-G809 Drop Shock Test System The system is also suitable for testing batteries. Max load: 100 kg Gkedpfx Asxmiiloaboc Table size: 500 mm x 600 mm Peak impact acceleration range (half-sine wave): 150 - 6000 m/s² Pulse duration (half-sine wave): 0.5 - 30 ms If the pulse duration is less than or equal to 3 ms, the tolerance for peak acceleration is ±20%; the tolerance for pulse duration is ±15%. If the pulse duration is greater than 3 ms, the tolerance for the waveform should comply with the range specified in the standard. Velocity tolerance: ±15% Hydraulic brake prevents secondary impact. Overall table dimensions: 1000 x 750 x 2450 mm Weight: 3600 kg Power consumption: 5.5 KVA 380V ±10% AC 50 Hz Condition: used (We reserve the right to make changes and correct typing errors in technical data and specifications!) If you have any other questions, we would be happy to answer them by phone.

Condition: ready for operation (used), Year of construction: 2019, Injection Unit Screw diameter 35 mm Gkedpfx Aasxllnzobsc Clamping Unit Clamping force 150 t This Arburg 520 H was manufactured in 2019. It features a clamping force of 150 tons, tiebar spacing of 520x520 mm, and a screw diameter of 35 mm. It includes a selecting unit and a single platen design. Consider the opportunity to buy this Arburg 520 H hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: like new (used), Year of construction: 2007, functionality: fully functional, pressing force: 10 t, table width: 430 mm, table length: 410 mm, overall weight: 550 kg, for sale in new condition ATSUGI 10 Ton Hydraulic Press Atsugi AP-10-KL year of manufacture:2007 Used load range:40-100 (kN) Stroke (mm): 200 Lower speed (approach fast speed: 350 (mm/s) Lower speed (under pressure slow speed:180 mm/s Rise speed 200(mm/s) Operating area: Open height: 350mm Open depth: 225mm Table size: 430x410mm Motor specification 3 phase AC200V 4P 1.5KW Two-hand operation . Mobile workbench Operating oil / quantity Daphni Hydraulic 46/9L Gkjdpfxjv Sd Hte Aaboc Total weight (kg) 500 Body size ​ Height (mm) 1325 Width (mm) 485 Depth (mm) 915

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Gkjdpfx Aaspbvqvsbsc Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor Gsdpfx Aexl Rzgeabekc -Manufacturer: Sauer Danfoss, hydraulic motor -Type: N365 OMP 200 151-0615 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 2x aggregate available -Price: per piece -Dimensions: 210/130/H120 mm -Weight: 7.1 kg/piece

Condition: used, Year of construction: 2019, Serial number: W09S3L330K0D4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21506 Specifications: 3 axles Lift on axle 1 Steering on axle 3 Good tires Air suspension Hydraulic loading ramps Extendable Manual widening Lower deck length: Approx. 8.97 m Upper deck length: Approx. 4.3 m Toolbox Max payload: 39,190 kg Gkodpfx Aajxlx S Heboc Ready for delivery Description:Doll machine semi-trailer from 2019 in good condition.The trailer is recently EU-approved and ready for delivery.It is equipped with hydraulic loading ramps, manual widening, and extendable deck. Technical approved: Yes EU-approved until: 14.08.2026 Own weight: 11710 Total Weight: 50900 Payload: 39190 Width: 255 Length: 1355 Model: maskinsemi

Condition: ready for operation (used), Year of construction: 2014, operating hours: 18,612 h, Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 150 t Godpfoxllkvsx Aabekc This Arburg 520 H 1500-400 was manufactured in 2014. It features a closing force of 150 tons and a screw diameter of 35mm, suitable for precision hydraulic injection moulding. Operating on 400V, it has a total connected load of 89 kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), power: 2.21 kW (3.00 HP), Var-Spe 10.15/067B/BZ hydraulic variator Gkjdporxd Axofx Aabsc Input shaft: Ø28mm Output shaft: Ø32mm Power: 2.2 kW 3HP Speed: 0-900 / 0-1430 rpm Installation position: Horizontal B3

Condition: good (used), Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, double hydraulic pump -Type: 0 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Number: 4x pumps available -Price: per piece -Dimensions: 225/90/H120 mm Gjdpfxovvigge Aabokc -Weight: 5.6 kg/piece

Condition: ready for operation (used), Year of construction: 2010, Injection Unit Screw diameter 25 mm Gkjdpfxjxlln Ij Aaboc Clamping Unit Clamping force 80 t This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 500 kg, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Gkjdpev Sd S Nefx Aaboc Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate oil cooler Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 2013, Injection Unit Screw diameter 55 mm Shot weight 498 g Injection pressure 2070 bar Screw speed 220 rpm Clamping Unit Clamping force 2700 kN Opening stroke 600 mm Mould height min 200 mm Mould height max 600 mm Ejector stroke 200 mm Ejector force for / back 130 kN Gkjdpfx Aoxgv Twsabsc This WITTMANN TM Xpress 270/2250 Unilopg B6P was manufactured in 2013. It features a screw diameter of 55 mm, a maximum screw speed of 220 rpm, and a clamping force of 2700 kN. The machine offers a maximum shot weight of 498 g and an injection speed of 980.0 cm³/s. It includes a Wittmann CNC 8 control for enhanced operation. Contact us for more information about this machine. Application Types Injection Moulding