Used Hydraulic Test Bench for sale (27,790)

Condition: ready for operation (used), Year of construction: 2007, General Data Guodpfxjxmbzts Aabeh Machine weight 15200 kg Main Drive Pressing force 2000 kN General Data Machine weight 15200 kg Main Drive Pressing force 2000 kN This LAUFFER DK 200 was manufactured in 2007. A robust hydraulic stamping press with a pressing force of 2000 kN and a retraction force of 243 kN. It features a maximum stroke of 320 mm and operates at a work pressure of 249 bar. Weighing 15,200 kg, consider the opportunity to buy this LAUFFER DK 200 hydraulic stamping press. Contact us for further details regarding this machine. Application Types Stamping

Condition: used, Year of construction: 2011, -Special price Machine brakes defective- Pressure: 36 t Godpfxjxnyhbj Aabsuh Bending length: 1020 mm Distance between uprights: 932 mm Stroke: 120 mm Installation height: 295 mm Throat depth: 150 mm Machine weight approx.: 2,600 kg

Condition: new, Year of construction: 2024, operating hours: 818 h, functionality: fully functional, pressing force: 350 t, stroke length: 1,000 mm, warranty duration: 12 months, Technical Specifications Capacity: 350 Tons at 250 bar (total with auxiliary cylinders) Main Cylinder: Ø395 mm, Rod Ø300 mm, Stroke 1000 mm Auxiliary Cylinders: Ø80 x 100 mm, Rod Ø50 mm, Stroke 1000 mm Cushion Cylinders: Ø180 x 230 mm, Rod Ø115 mm (4 units) Motor: 18.5 kW – 25 HP, 1500 rpm, IE3, 380 V Pump: 71 cc, 105 L/min, variable displacement, pressure-compensated piston type (Taiwan, imported) Valve Block: NG-16, 24 V DC, P-Q proportional control Comprehensive, precise proportional control for all movements: pump protection valve, decompression relief valve, main ram–cushion circuit, pressure transmitter, auxiliary throat protection valve, cushion-seal protection valve, free-fall valve. Electrical Cabinet: Siemens Gusdpfoxf Dzgex Aabeh Screen: GMT 7” (domestically produced, 1-year warranty) Pre-Fill Valve: NG 160 (Taiwan model) Speeds: Down fast: 175 mm/s (P-Q proportional adjustable) Up fast: 285 mm/s (P-Q proportional adjustable) Under load: 5 – 14.5 mm/s (P-Q proportional adjustable) Dimensions: Table 1200 x 1000 mm, Daylight 1000 mm Linear Scale: Yes Light Curtain: Yes Weight: 15,000 kg ± Oil Tank: 1300 x 900 x 600 mm, 700 L capacity

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 1,550 mm, working width: 1,550 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotors and planetary gearboxes * Easily removable bent parts thanks to a hydraulically opening top roll * Very easy operation with movable control panel * Lower roll positions are easily read via two digital displays * Welded steel frame construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical rolling system with roller bearings * Hydraulic synchronisation system for parallel movement of shafts * Extended shaft ends to allow mounting profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Specially ground and polished rolls for custom work * Bending rolls for profiles * Infinitely variable hydraulic speed adjustment * Electronic synchronisation system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Motor Power: 7.5 kW Guodpfx Aaexbzr Ujbeh Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Condition: ready for operation (used), Year of construction: 1998, The system is operational ready to be used. We can also refurbish it it needed. Motors are 5.5kw each. Date of construction: week 48/1998, dimensions: 1000 mm x 820 mm x 1590 mm. Gsdpfx Aoupg N Ujabeuh

Condition: refurbished (used), Hydraulic variator, e.g. for the feed drive of a PRIMULTINI band saw clamping carriage, including brand-new drive motor 5.5 kW/1440 rpm, individual, manual rapid feed adjustment forwards/backwards including by-pass valve for smooth reversing when accelerating and braking the clamping carriage, with ATOS electric solenoid valve for fast and safe feed-off switching, with 280 mm Ø V-belt pulley Guedjlyqbbopfx Aabjh

Year of construction: 2012, condition: ready for operation (used), This MILLUTENSIL Mil 303 hydraulic press was manufactured in 2012. It features a usable table of 3000 mm by 2000 mm, with a maximum load capacity of 30,000 kg on the upper table and 70,000 kg on the lower table. The press operates with a total power of 31.1 kW and offers adjustable hydraulic pressure up to 240 bar. Consider the opportunity to buy this MILLUTENSIL Mil 303 hydraulic press. Contact us for more information. Gjdpfx Aexnr Dhoabjuh Application Types Bending

Condition: used, Year of construction: 2000, Press force: 85 t Bending length: 2050 mm Gujdpfxexnxwno Aaboh Distance between uprights: 1750 mm Control: DELEM Stroke: 215 mm Throat depth: 410 mm Weight: 7,900 kg Machine dimensions: 2700x2100x2400 mm Accessories: - Two-hand operation - 2 support arms - Side safety doors - Lasersafe Fissler - Wila tool holder - Die shifting - Crowning - Tool cabinet

Condition: new, Year of construction: 2025, neu 2025 090132 prompt, Zwischenverkauf v Türkei 47500 € 798.38 € 1 41800 € 3100 mm 6 mm 4 mm 50 mm 15 1/min 1,5 ° Guedpfx Ajwiqyyeabjh 16 14 to 1000 mm 200 mm/s 15 kW 200 l 2 Stk. 865 mm 500 mm 3515 mm 4110 mm 2200 mm 3700 mm 2100 mm 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules WE HAVE MORE THAN 850 REFERENCES!

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 550 mm, roller (top) diameter: 550 mm, side roll diameter: 450 mm, roller length: 3,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, power: 70 kW (95.17 HP), warranty duration: 12 months, Equipment: emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT Gusdpfexbzptsx Aabsh * The bottom and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overloading * The top and side rolls are driven by hydromotors and planetary gearboxes (all 3 rolls are motor-driven) * Easy roll position reading via three digital indicators * Easy removal of bent parts thanks to hydraulically opening head and automatically lifting shaft * Very user-friendly operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support when bending large diameters * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Polished and ground rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Condition: used, Year of construction: 2021, Serial number: VS94NTRGSMA86xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21540 Specifications: Gusdpfx Aaoxm S Udjbeh EU-approved until 28.07.2026 2021 model Tires (see pictures) Length: 1,290 cm Width: 255 cm Axle distance: 181/181 cm Curb weight: 13,940 kg Max payload: 59,060 kg Hydraulic loading ramps Lift on 1st axle Toolbox Description:Rojo semi low-loader from 2021 with a maximum payload of 59 tons.The trailer is EU-approved until July 2026.Available for prompt delivery. Technical approved: Yes EU-approved until: 28.07.2026 Own weight: 13940 Total Weight: 73000 Payload: 59060 Width: 255 Length: 1290 Model: 2021 Rojo Maskinsemi m/ hydrauliske kjørebruer

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Maximum Pressure: 225 bar Weight: 3,200 kg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Guedpfjxfl Axsx Aabsh Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Exact scope of delivery as shown in the photo series. The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1900 mm Measurements depth 6600 mm Measurements height 2400 mm Machine weight 14900 kg Injection Unit Screw diameter 50 mm Shot weight 482 g Stroke volume 530 cm3 Injection pressure 2426 bar Adjustable heating zones 5 Nozzle pressure 110 kN Clamping Unit Clamping force 2500 kN Opening stroke 670 mm Max open daylight 1380 mm Mould height min 330 mm Mould height max 710 mm Gedpfoxnd Sqox Aabeuh Ejector stroke 200 mm Ejector force for / back 81 kN Media Pump drive power 30 kW Oil tank 550 L This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Type: SAL 1000-FL PLC / V.715.362.520 For sale is a used VLM Salt Spray Corrosion Test Chamber, type SAL 1000-FL PLC, ideal for industrial corrosion tests in accordance with international standards (DIN EN ISO 9227, ASTM B117). Perfectly suited for both laboratory and production environments to test materials, coatings, and components under controlled corrosive conditions. Features: - Robust stainless steel frame construction, max. load 450 kg - Precise control and reproducible testing - Versatile applications for salt spray, condensation water, and ventilation testing Technical details: - Exterior: Stainless steel 1.4301, powder-coated (special version) - Test chamber: Stainless steel, ECTFE-coated - Max. chamber temperature: +80 °C - Temperature stability: ±0.3 °K, temporally ±0.1 °C - Process control: PLC with touchscreen, LED display - Interface: Ethernet - Water quality: demineralized, max. conductivity 20 µS/cm - Humidifier water consumption: approx. 0.5 l/h (depending on program) - Water connection pressure: 2–4 bar - Compressed air consumption: approx. 20 m³/h - Compressed air connection: 6–8 bar - External dimensions (W x D x H): 2160 x 670 x 1090 mm incl. base cabinet: 2160 x 670 x 1890 mm - Internal chamber dimensions (W x D x H) / volume: 1400 x 605 x 920 mm / 1040 l - Max. load sample rod: 40 kg - Electrical connection: 400 V / 50 Hz / 4000 W - Weight (empty): 350 kg Condition: used Scope of delivery: (see image) Gujdpfexnyqvjx Aabsh (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 1984 Pressing force: 10 t Total pressing area: 300 x 300 mm Stroke: 540 mm Dimensions W x D x H: approx. 900 x 500 x 2150 mm Gusdpferyn S Ajx Aabjh

Condition: as good as new (ex-display), A fully hydraulic demonstration bending machine WIEGAND with NC- 10 control system manual or automatic bending mode automatic mode: Close upper beam, bend set angle, open upper beam bending beam or upper beam manually adjustable according to sheet thickness adjustable opening width of upper beam backgauge manually adjustable CE standard documentation bending length: 2500 mm bending capacity: 2,5 mm max. bending angle: 0 - 120°. backgauge manually adjustable min/max: 60/1000 mm power: 3,0 kW weight: 2500 kg Gusdpfspgmqiox Aabsh Tech. Data and dimensions: Errors excepted Further tech. Data see pdf. Document

Condition: used, Year of construction: 2006, operating hours: 11,000 h, Serial number: K5xxxx Please contact ATS Norway for more information Guodpfxewvzmkj Aabsh Please provide reference number upon request: 20786 Not certified Used as an unloading machine Registered in the machine register Approximately 11,000 hours Sold without hp mount Sold without bucket Defective hydraulic pump Total width 298 cm Okay chassis Good sprocket Central lubrication 22,260 kg 110 kW Flashing roof Bunkering pump Old 2-axis laser Seat heating Ac Ready for delivery   Description: The machine has been used internally as an unloading machine. It ran out of oil one day and thus the hydraulic pump failed. Sold without hitch and bucket. Can be picked up on a trailer, owner is helpful with getting it on a trailer. Hours: 11000 Total Weight: 22260 Kw: 110

Condition: new, Year of construction: 2025, TECHNICAL DATA Pressing force 30t max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Guedpfei Amnpox Aabjh Location: Ex works - available at short notice -

Year of construction: 2007, operating hours: 70,000 h, condition: ready for operation (used), This Arburg Allrounder 820 S 4000-2100 was manufactured in 2007. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and an injection pressure up to 2500 bar. The machine has a hydraulic pump drive power of 55 kW and a total installed power of 88.9 kW. Ideal for precision in plastic processing, it offers robust performance with a comprehensive control system. Contact us for more information about this machine. Guodpfoxnd Ixsx Aabeh Application Types Injection Moulding

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-preserved hydraulic press brake HATASTAR equipped with: - CYBELEC DNC 70 control - Controlled axes Y1;Y2;X;R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system - Tools - Press book - Documentation bending length 4600mm Stands width 4100mm Press force 1350kN stroke 220mm Rapid traverse 140mm/sec working speed 10mm/sec Retraction speed 100mm/sec Further tech. data see pdf.- document Tech. Data and dimensions: Errors excepted. Godpfxefthzko Aabjuh

Year of construction: 2025, condition: as good as new (ex-display), Workbenches in Pro version Precise and careful processing Completely made of steamed, solid beech All important edges are rounded Environmentally friendly oiled surfaces Standard with tool drawer The two cylinder rods of the collets are precise and stable in a casting With smooth trapezoidal threaded spindle French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in Finger hot dip galvanizing in rear caliper and by charging back 1915 mm long work surface without pliers Width/depth work surface without pliers 615 mm Working height 870 mm Gedpfxoc Uydaj Aabouh Length 520 mm front caliper Length 450 mm rear caliper Wide front caliper 70 mm Wide rear pliers 140 mm Span front pliers 190 mm Span back pliers 180 mm Span front clamp until the Middle Hook 225 mm Span back pliers until the Middle Hook 265 mm Plate thickness 50 mm Length 2120 mm (product) Width/depth (product) 790 mm Height 870 mm (product) Weight 91 kg (net) Location: Off the shelf 54634 Bitburg

Year of construction: 2021, operating hours: 5,797 h, condition: ready for operation (used), This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Application Types Injection Moulding Godpfoxnd Skex Aabsuh

Condition: excellent (used), Year of construction: 1992, Technical data: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 32 mm - Wheel speed approx. 2500 rpm - Drive 400 V / 0.8 kW - Working height approx. 980 mm - Machine stand - Drive extraction 400 V / 1.5 kW - Space required approx. W 550 x H 1100 x D 650 mm - Weight approx. 70 kg Godswq Ea Ropfx Aabjuh Location: ex stock 54634 Bitburg - available immediately -

Year of construction: 2003, condition: ready for operation (used), Control Unit Brand SIEMENS Model SIMATIC OP7 This MILLUTENSIL MIL163 hydraulic press was manufactured in 2003. Ideal for various pressing applications, it offers robust performance and reliability. Consider the opportunity to buy this MILLUTENSIL MIL163 hydraulic press. Contact us for more information. Application Types Godpsxlvb Ejfx Aabouh Stamping

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Guodpfxjg U Uv Re Aabeh Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S