Used Hydraulic Test Bench for sale (27,967)

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test Volume: 335 liters Specifications for Temperature Testing: Temperature range: -70 to +180°C Time-based temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Specifications for Climate Testing: Temperature range: +10 to +95°C Time-based temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-based humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R452A / R-23 Important safety information for buyers: The following procedures are carried out on our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Recharging with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Godpfxjxmhyco Aabekc Scope of delivery: (See image) (Subject to technical modifications and errors. All information is non-binding!) For further questions, please do not hesitate to contact us by phone.

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 3700 mm Measurements depth 4100 mm Measurements height 2300 mm Machine weight 12500 kg Main Drive Spindle motor power 30 kW Additional Equipment CNC-controlled CybTouch 8 touchscreen for precise and easy settings Back gauge with ball screw and linear guide, CNC-controlled adjustable in the range of 5–1000 mm Motorized cutting gap and angle adjustment directly via the control panel 15 clamping units with rubber pads to prevent sheet slipping Built-in LED lighting to illuminate the cutting zone Safety elements include rear light curtain and fold-up plexiglass finger guard High-quality, resharpenable knives (upper knife 2-piece, lower knife 4-piece) Mobile foot pedal with emergency stop switch Built-in ball table for easy sheet movement Electrical components: Siemens and Mitsubishi // Hydraulic components: Hydac, Hoerbiger This Metallkraft HTBS PRO 3113 was manufactured in 2022. It's a hydraulic shearing machine designed for precise cutting of steel and stainless steel plates up to 13 mm thick. Features include a CNC-controlled back gauge, motorized cutting gap and angle adjustment, and built-in LED lighting for enhanced visibility. Ideal for industrial settings requiring high precision. Contact us for more information about this machine. Gksdpfxjxd Ib Us Aabjc Application Types Shearing

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation Godpfjxmakgex Aabskc * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Condition: used, Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Gkjdpfx Aajwyplcobec Weight of machine approx.: 1,75 ton

Condition: excellent (used), SCM T 130 N Spindle Moulder The machine is in excellent technical and visual condition. After a comprehensive technical inspection. Italian manufacturer. TECHNICAL SPECIFICATIONS: - Motor power: 7.5 kW - Spindle diameter: 30 mm - Spindle height: 150 mm - Maximum tool diameter: 350 mm - Mechanical height adjustment - Electric brake - Table size: 730 x 1200 mm - Two auxiliary tables: 410 x 670 mm - Table height from base: 925 mm Machine dimensions: - Length: 260 cm - Width: 110 cm - Height: 120 cm - Weight: 800 kg Where can you view our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE LUBELSKIE PROVINCE Gsdpfxjxl Dqbs Aabekc Financing available via lease or installment plan. Just visit our website: jbsmaszyny.pl You are welcome to test the machine. Where can you view our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE Nationwide machine transport! Tel: 663 495 647 German Tel: 664 335 475 English Tel: 530 632 386 English

Condition: good (used), Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Price: per piece -Number: 4x Available -Dimensions: 270/120/110 mm Gksdpfx Aeb A H H Nsabsc -Weight: 6.7 kg

Condition: excellent (used), Type: WK3-340/70 Weiss Climate Test Chamber, Water-Cooled Control Unit: “Touch Panel” All control and operating commands can be triggered simply by touching the function symbols on the “Touch Panel” control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for uneven floors and to ensure sufficient ventilation of the machine section. Feed-Throughs The test chamber is fitted with feed-throughs on both the left and right sides. These allow measuring cables and test devices to be routed into the test chamber. Feed-throughs included in the basic configuration: R1: nominal width 125 mm L1: nominal width 85 mm Volume: 335 liters Test Chamber Internal Dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External Dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Specifications for Temperature Tests: Minimum temperature: –72°C Maximum temperature: +180°C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature uniformity spatially: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Specifications for Climate Tests: Temperature range: +10°C to +95°C Dew point range: –3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature uniformity spatially: ± 0.5 to ± 1 K Humidity deviation over time: ± 1 to ± 3% RH Operating Data: Test chamber lighting: Halogen bulb 2 x 24V, 50W Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 16 A Nominal power: 4.9 kW Protection: 16 A slow-blow fuse, to be provided onsite Refrigerant: R-452A/R23 Weight: approx. 585 kg For your security as a buyer, please note the following information! The following procedures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required Gsdpfx Asxmg Sdjabekc 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data, information and specifications are subject to change and errors.) If you have any further questions, we will be happy to assist you by phone.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 73,135 h, General Data Machine weight 7800 Control Unit Brand KRAUSS MAFFEI Model n/a Clamping Unit Clamping force 130 t This Krauss Maffei 130-380 CX was manufactured in 2007. A hydraulic injection moulding machine with a clamping force of 130 tons and a screw diameter of 35 mm. It has accumulated 80,019 operating hours, ensuring extensive production experience. Consider the opportunity to buy this Krauss Maffei 130-380 CX hydraulic injection moulding machine. Contact us for more information. Gksdpfx Aewpycdeabec Application Types Injection Moulding

Year of construction: 2025, condition: new, Hydraulic Impact Shear The hydraulic impact shear cuts material continuously in operation using two bushes. The electric servo drive enables precise speed control of the shear carriage. High cutting speed and fine adjustment of the shear bushes guarantee optimal cut surfaces. Cutting is also possible in stationary mode. A remnant piece detection system can also be used. When shearing is not feasible (e.g., for tubes, hollow profiles, etc.), a sawing device or a chipless cutting unit is mounted on the base frame instead of the shear head. 🚀 Maximum precision, maximum power – as strong as an elephant! 🐘 The essential machine for manufacturing quality steel – faster, tougher, and more reliable: 🔹 Speed: max. 120 m/min 🔹 Cutting capacity: 40 mm (hexagon & round bar) 🔹 Motor: Siemens 1FK8 servo technology 🔹 Gearbox: Neugart 🔹 Linear guide: THK (size 45) 🔹 Lead screw: Güdel 🔹 Hydraulic unit: Bosch Rexroth – hoses with clamp protection 🔹 Pressure sensor: Balluff 🔹 Automation: Siemens S7-1500TF 🔹 Safety: Pilz safety components 🔹 Operator panel: Siemens TP1500 🔹 Encoder: Sick AFM60A 🔹 Cooling unit: 2000W electrical cabinet cooling 🔹 With 30 mm wall thickness and 50 mm support beam – engineered for long-lasting operation. Godsxdvkqopfx Aabskc

Condition: used, machine/vehicle number: H84 - 1331, Press capacity: 16 ton Throat depth: 250 mm Stroke: 300 mm Daylight: 600 mm Table surface area : 553 x 368 mm Approach speed: 121 mm / sec Godpfx Aeu Iuk Ejabekc Return speed: 450 mm / sec Working speed: 45 mm / sec Required power: 7,5 kW

Condition: good (used), Table size: 700 x 2000 mm Beech wood top: 50 mm Gjdpfxexlpbro Aabjkc Working height: 800 mm

Condition: good (used), Year of construction: 1957, hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter output: 21 l/min -Weight: 200 kg Gjdpfx Aaob A I Elebjkc

Condition: used, Year of construction: 1985, Nominal pressing force: 40 t Ram stroke: 500 mm Clamping height: 710 mm Table size: 630 mm Ram outreach from frame: 320 mm Gsdpfjxm R Ivjx Aabjkc Ram speed: - idle 125 mm/s, - pressing 16 mm/s, return 315 mm/s Machine is connected to power and operational

Condition: new, Year of construction: 2024, AVAILABLE IMMEDIATELY, 3 year guarantee from invoice date FREE DELIVERY Spindle speed continuously electronic 40-4000 1/min Gkjdpfxjig H Rds Aabjc Spindle: MK 2 Table height adjustment with rack Thread cutting capacity max M12 Setting the thread cutting depth via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed/by hand Table height adjustment with rack Continuous/normal drilling capacity steel Ø 15 mm / 18 mm Drilling depth 70 mm Projection 220 mm Column diameter 70 mm Usable table surface (W x L) 300x250 mm Machine dimensions (W x D x H) 420x520x850 mm Weight 65 kg Max. distance spindle/table/foot 300/ 370/ 420 mm AC motor with frequency converter 230 V, 0.54 kW OPTION drilling package B16 (No. 296570) - Vice felix 80 - Keyless drill chuck 1-13 mm Price: € 599.00 Factory guarantee: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,626 h, Injection Unit Screw diameter 25 mm Gjdpfx Aexizguoabokc Clamping Unit Clamping force 100t This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, Year of construction: 1999, machine/vehicle number: 042-036/4, Press capacity: 100 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Slide area: 530 x 400 mm Table surface area : 750 x 560 mm Hole in table: 200 mm Table height over floor: 710 mm Working speed: 10 mm / sec Approach speed: 150 mm / sec Return speed: 150 mm / sec Required power: 17 kW Gsdpfx Aajvakd Uebjkc Dimensions L x W x H: 1.400 x 2.000 x 3.200 mm Weight of machine approx.: 5,1 ton

Condition: excellent (used), Drilling capacity -18 mm Spindle taper FEHLMANN Spindle speeds 135-4500 rpm Throat 225 mm Cross table 530 x 255 mm Digital read-out Accessories MARCELS MASCHINEN CH Godpfelyrcmex Aabskc

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Kleinschmidt, double-acting hydraulic cylinder stroke 25 mm -Type: KF22F-100 -Piston: Ø 100 mm -Piston rod: Ø 56 mm Gksdpfxsxltqqo Aabsc -Piston rod mount: M45x1 mm -Total length extended: 355 mm -Pressure range: max. 210 bar -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 243 x 330 mm -Weight: 36 kg/piece

Condition: used, Year of construction: 1997, operating hours: 11,432 h, CE mark: yes Serial number: 22e500xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20703 Specifications: - 1997 model - 11432 hours - 7600 kg - 50kW - Machine width: 205 cm - Manual quick coupler - Undercarriage (see pictures) - Extra hydraulics - Services done myself - Sweating on hoses - Sweating on cylinders - Air conditioning - Radio - Lights - Ready for delivery Gkedpfxswqwquj Aabec Description: We have a 1997 Komatsu pc75 excavator w/ Hydraulic sanding bucket, cleaning bucket and trench profile bucket for sale. The machine is from 1997 so there are errors and deficiencies. It sweats a little hydraulic oil from the hoses and all cylinders. There is also some slack. The cutter needs to be welded or replaced. (see pictures) In addition to this, it is starting to function as it should according to the owner. (see video) Ready for delivery Hours: 11432 Own weight: 7600 Total Weight: 7600 Width: 205 Kw: 50 CE: Yes Model: PC75

Condition: new, Year of construction: 2025, - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electric. Protection - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm Gjdpjfx U D Aefx Aabokc - Drill head height adjustment: by hand - Speed display: digital - Drilling depth display: digital - Feed (mm/revolution): by hand - Spindle speeds continuously variable: 60 – 6,000 rpm - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (depending on pitch): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION drilling package 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and keyless drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: ready for operation (used), Year of construction: 2013, operating hours: 54,526 h, Injection Unit Screw diameter 35mm Clamping Unit Clamping force 150t Gjdpfxoxizf Ro Aabjkc Injection Unit Screw diameter 35mm Clamping Unit Clamping force 150t This Arburg 520 H 1500-400 was manufactured in 2013. A hydraulic injection moulding machine with a closing force of 150t and a screw diameter of 35mm, it operates on 400V 3∼, 50Hz with a total connected load of 89kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 1991, machine/vehicle number: 041-024/39, Press capacity: 63 ton Gkodpfevai R Tjx Aabec Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Table surface area : 750 x 560 mm Slide area: 630 x 400 Working speed: 60 mm / sec Return speed: 380 mm / sec Electrical connected load: 12,6 kW Dimensions L x W x H: 1.200 x 1.950 x 2.800 mm Weight of machine approx.: 4,3 ton

Condition: excellent (used), Working travels 450 x 260 x 560 mm Spindle stroke 120 mm cross table 770 x 320 mm Drilling capacity 25 mm Spindle speeds 55 - 9200 Rpm With DRO With Threading attachement Misc accessories MARCELS MASCHINEN CH Gsdpfx Aetpgcnjabskc

Condition: good (used), Pressure 63to Gjdpfxech Daco Aabokc Stroke -400mm Distance ram-table 700mm Table size 1800x500mm MARCELS MASCHINEN CH

Condition: excellent (used), Drilling capacity -20 mm Spindle taper FEHLMANN Gkjdpsuy Sazofx Aabjc Spindle speeds 50-6300 rpm Throat 276 mm Cross table 530 x 255 mm Digital read-out Accessories MARCELS MASCHINEN CH