Used Hydroforming Press for sale (12,470)

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Nwjdpozulx Esfx Ad Ijk Type CX 1000 30 Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm Nwjdpfx Adozrppcs Iek material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s Nsdpfx Adozrppvs Iswk feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: used, Year of construction: 1961, pressure 075 t throat 230 mm stroke 6 - 100 mm no. of strokes 105 /min distance table/ram, max. stroke up, adjustment up 354 mm table surface area 700 x 420 mm hole in the table 250 mm table height over floor 800 mm passage to the back 310 mm ram surface 264 x 270 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,6 t Nwedpezrpp Nofx Ad Isk dimensions (WxDxH) 1,2 x 1,6 x 2,3 m with motor, friction clutch, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm no. of strokes 55 /min throat 500 mm passage to the back 800 mm dayligth 950 mm table surface area 1580 x 1000 mm hole in the table 400 x 400 mm table height over floor 800 mm ram surface 1000 x 720 mm Nwjdpfx Ajzrpqged Isk ram adjustment 125 mm power requirement 37,0 kW Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic counterbalance in ram, fix table, motorized central lubrication, two-hand operation

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 1110 mm stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface area 1100 x 900 mm Table height above floor 950 mm Side window 690 mm Ram surface 1100 x 900 mm Nedpfx Adjzrptho Ijwk Oil volume 730 l Power capacity 56,0 kW Dimensions (WxDxH) 2,3 x 1,55 x 3,96 m with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, depth stop No foundation pit necessary

Condition: used, functionality: fully functional, For sale is a Gránit-Mill 90 pellet press in good condition, suitable for pellet production or use in the animal feed industry. The main components of the machine are: * Pre-hopper * Feeder screw * Permanent magnet * Conditioner * Press * Control cabinet Motors: * Pre-hopper motor: 1.1 kW * Feeder motor: 1.5 kW * Conditioner motor: 15 kW * Table motor: 0.55 kW * Main motor: 90 kW Accessories: * 2 stickers * 1 set of grooved rollers (total of 2) Additional information: The control cabinet was originally designed for the simultaneous operation of two presses, but it is also possible to control the presses separately. Nwsdpszc Eudefx Ad Iek Price: * 1 Gránit-Mill 90 press with complete accessories and control cabinet: 29,000 EUR * When purchasing two presses together: 44,900 EUR The machines can be viewed at our location by prior arrangement. Further technical information, photos, and videos are available upon request.

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec Nwedpfx Adjyif Nrj Iek working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Nwedpfx Adjwx R Rde Ijk Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: excellent (used), Catalog number 7828 TECHNICAL DATA - max. width of workpiece: 200 mm - max. height of workpiece: 180 mm Nwjdozp N Erjpfx Ad Ijk - 2 sanding units: - top: metal roller + sanding shoe + metal roller - bottom: metal roller + sanding shoe + metal roller - top: - 2 pressure rollers, rubber, pulling type - sanding unit - 2 pressure rollers, rubber, pulling type - bottom: - sanding unit - side guide strip - electrically adjustable sanding height, 0.37 kW - 6 feed speed settings + right/left: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor: 0.75 kW - main motors: 2 x 4 kW - diameter of dust extraction nozzles: 80 mm - overall dimensions (L/W/H): 1500x740x1600 mm - weight: 560 kg ADVANTAGES - Made in Germany - 2 sanding units - Unpainted - DTR documentation - Used sander, very good condition Net price: 10900 PLN Net price: 2600 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1113, total width: 1,170 mm, total height: 1,510 mm, total length: 1,850 mm, briquette diameter: 60 mm, overall weight: 770 kg, Never used = New machine condition Year of manufacture: 2024 Operating hours: 6! - Option for water or oil cooling, suitable for larger or multi-shift operations (price is stated without cooling system) - Sufficiently large hopper ensures long machine runtime without the need for frequent material refilling Nwjdpfeyh Nfhjx Ad Iok Technical data: Motor power: 7.5 kW Briquette output: 40–100 kg/h depending on material Briquette diameter: 60 mm Briquette length max 60 mm (so-called endless briquette) Pressing pressure: 900 kg/cm² Hopper diameter: 1000 mm Dimensions: 1850 x 1170 x 1510 mm Weight: 770 kg Features: Hydraulic unit: 7 pressing cycles/min SIEMENS LCD programmable touch control panel Manual or fully automatic operation possible – SIEMENS PLC control Dual pressure gauge for improved pressure monitoring Briquetted material level probe Oil level probe Preheating unit for operation in low temperature environments Inspection window Can be connected to other machines in a production line Voltage: 400V – 50 Hz Moisture content of processed material must not exceed 18%

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Njdev Tp D Hepfx Ad Iowk Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: like new (used), Year of construction: 2026, operating hours: 6 h, Actually one showroom machine available. Nsdpfoxfwdex Ad Iewk Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), functionality: fully functional, Shelf length: 3000 mm Nedpfx Adsztpwce Iewk Shelf width: 1300 mm Number of pistons: 6 Water heating Safety switch with shear pin

Condition: ready for operation (used), Pressing force: approx. 700 kN (approx. 70 tons) Nodpfx Adera Ddde Ijwk Motor power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Single bale weight: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m in length, 2.5 m in width, approx. 2.6 m in height Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Construction features large feed opening for cardboard possibility of automatic feeding (e.g., via conveyor) manual wire tying (4 wires) pallet lock and hydraulic doors for bale removal Advantages of this press large bales = fewer transports high pressing force suitable for continuous operation Available production years: 2018–2020

Condition: used, functionality: fully functional, AUGUST SPECIAL OFFER - The machine needs to be moved urgently: SPECIAL PRICE: Only €2,000 (as is)!!! MAN Roland Practica PRZ 00 2-Color Offset Printing Press Type: Sheet-fed Manufacturer: MAN Roland Model: Practica PRZ 00 Nsdpfx Adezg Nb Ie Iewk Colors: 2 Important Note: Only 14 million copies printed!!! Maximum paper size: 360 x 520 mm Maximum print area: 350 x 500 mm Numbering and perforation Maximum speed: 10,000 sheets/hour Machine length: 2640 mm Condition: Excellent (in stock) Location: Italy Note: (The machine will be sold as spare parts)

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, power: 4 kW (5.44 HP), We are offering this very well-maintained Uniflex HM 325.2i_C.2_FD_MVA hose crimping machine with foot pedal, year of manufacture 2020. Model: HM 325.2i_C.2_FD_MVA Serial number: 60046 Voltage: 400 V Njdpfx Adjy Apdws Ijwk Current: 15/8.5 A Power: 4.0 kW Frequency: 50/60 Hz Year of manufacture: 02/20 Price ex works. The machine must be collected either personally or via freight forwarding. Payment terms: 50% down payment / 50% upon collection – no cash payments! Payment by bank transfer only. Any warranty and liability are excluded. If you have any questions or require more information, please do not hesitate to send us a message.

Condition: used, Year of construction: 1964, machine/vehicle number: 63/10.2995-96, pressing force: 1,200 t, total length: 5,300 mm, total width: 2,690 mm, total height: 9,300 mm, overall weight: 3,60,000 kg, Press force: 1,200 t Ram stroke: 600 mm Ram adjustment: 500 mm Stroke rate: approx. 10 – 16 strokes/min Shut height: approx. 1,250 mm Drawing equipment: Drawing cushion force: approx. 240 t Drawing cushion stroke: approx. 250 mm Pneumatic ejector in ram: Force: approx. 95 t Stroke: approx. 150 mm Table size: approx. 3,500 x 1,900 mm Heavy-duty mechanical eccentric press in robust double-column design from Schuler, suitable for industrial applications as well as classical forming and deep drawing processes. The machine features a press force of 1,200 t with a fixed ram stroke of 600 mm and a ram adjustment of 500 mm. The stroke rate ranges from approx. 10 to 16 strokes per minute, allowing flexible use depending on the application. The working area is designed with a table size of approx. 3,500 x 1,900 mm, offering sufficient space for medium to large tooling. A key feature is the movable / sliding press table, which significantly simplifies setup and tool change and makes the machine ideal for handling heavy tools. The integrated drawing equipment (drawing cushion) provides approx. 240 t of force with a stroke of 250 mm, enabling demanding forming and deep drawing operations. Nwsdpfsy S Nhzsx Ad Isk In addition, the press is equipped with a pneumatic ejector in the ram (approx. 95 t / 150 mm), supporting automated part removal. Pressing force max.: 1,200 t Dimensions (LxWxH) approx.: 5300 x 2690 x 9300 mm Installation height max.: 1,250 mm Weight approx.: 360,000 kg Machine table clamping surface: 3500 x 1900 mm Passage between the uprights: 3,600 mm Serial number: 63/10.2995-96 Year of construction: 1,964 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: used, functionality: fully functional, On offer: ITALPRESSE Nuovo Program edge press – 3000 × 2000 mm, 9.5 t pressure The machine is used, has undergone a technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is the ability to apply pressure to components simultaneously in two planes, thanks to independently controlled vertical and horizontal cylinders. Its large working range and even pressure distribution enable precise gluing of frames, furniture carcasses, boxes, fronts, and other structural elements. Specifications: • Manufacturer: ITALPRESSE • Model: Nuovo Program • Year of manufacture: 2004 • Maximum working dimensions: 3000 × 2000 mm • Minimum working dimensions: 250 × 340 mm • Number of vertical cylinders: 2 • Number of horizontal cylinders: 2 • Type of cylinders: hydraulic • Total clamping force: 9.5 t • Cylinder control: independent for vertical and horizontal cylinders • Control panel: suspended, mounted on an arm • Hydraulic unit power: 1.5 kW • Maximum working pressure: 150 bar • Width of clamping beams: 100 mm • Power supply: 400 V / 50 Hz • Weight: approximately 1200 kg • Overall dimensions: 340 × 95 × 260 cm (L × W × H, without the control panel arm) • Complies with CE requirements Applications: • Gluing of frames and frame structures • Assembly and gluing of furniture carcasses Nwodpjzivvwefx Ad Isk • Gluing of boxes, fronts, and other structural elements • Precise positioning of components before gluing • Simultaneous pressing of components in the vertical and horizontal planes Additional information: • The photos show the actual condition of the machine on offer • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-community supply with a VAT rate of 0%; in the case of domestic sales, 23% VAT will be added Financing and transport: • We arrange transport with our MDD fleet or through external carriers • We assist in obtaining a lease or leasing loan • The cost of delivery depends on the destination and the method of machine transport

Condition: refurbished (used), RETROFIT complete Pressing force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Ram: 750 x 450 mm Nedpfow S Uazex Ad Iewk Throat depth: 360 mm Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Weight: approx. 7,000 kg Connection: 17 kW - a complete retrofit kit for unrestricted manual loading and unloading compliant with EC directives and CE equipment requirements, - new control cabinet with certified two-channel electronic PLC safety controller from Siemens (1512SP F or 1515F) for process control, featuring integrated control panel for the operating modes: setup with two-hand control, single stroke with two-hand control, and foot operation (only in combination with BWS); manual lever operation is no longer possible, - hydraulic safety block for monitoring the closing movement of the main cylinder, - position-monitored directional valve for the up and down movement of the ram of the main cylinder, - two-hand control device with two-channel monitoring of the two-hand synchronization at the press table (incl. 5m cable), - replacement of main and control pump motors, - replacement of seals on the main cylinder, - fine filter with contamination indicator, - the press is equipped with an electronic position measurement system (including teach-in function and display of the current ram position), eliminating the need for a mechanical cam switch. Main control panel integrated into the control cabinet (mounted on the right side of the machine): - 12" touch panel - Control buttons and switches for operating modes and drives - USB interface for data exchange - Light curtain Option: Drawing cushion

Condition: good (used), Year of construction: 2004, pressing force: 450 t, overall weight: 40,000 kg, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Nodju Au U Tepfx Ad Iowk Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW

Condition: excellent (used), 6000 x 900mm. Penumatic. 2 machines. Price each. Contact us for more information transportation throughout Europe can be arranged Nsdpfezv Rqcox Ad Iowk

Condition: used, Year of construction: 2016, General technical data: Machine type: Flexographic printing press Nwjdpfsyn Sb Ujx Ad Iok Web width: 430 mm Number of colors: 6 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment • 3 die-cut stations • 2 gap master units • Delivery: reel or sheet with folding table • 6 UV IVT lamps • Turning bar • Delam/Relam unit – 1 color • 3 sets of sleeves • 6 anilox rollers • 3 magnetic cylinders

Condition: used, Year of construction: 2002, Machine type: Flexographic printing press Web width: 520 mm Number of colors: 8 Nodpfjyn Scljx Ad Iewk Equipment & Configuration: • 7 UV LED units + 1 UV unit • 5 sets of sleeves • 5 magnetic cylinders • 12 anilox rollers • Cold foil unit – 1 • Turning bar – 1 • 2 die-cut stations • Double-shaft rewinder

Condition: used, Year of construction: 2017, Maximum printing width: 1,650 mm Maximum web width: 1,700 mm Printing repeat: 430 – 880 mm Maximum mechanical speed: 600 m/min Suitable for solvent-based inks and coatings CFK Air Base mandrel printing cylinder system Stork CFK Air Base anilox sleeve system Gas drying system with Maxon burners Automatic viscosity control system Allstein / Inkspec Automatic ACLEAN ink cleaning system AVISCO viscosity control ARUN automation package Hydrostatic central impression cylinder bearings Unwind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shaftless * Material width: 850–1,700 mm (shaftless); minimum 450 mm with winding shaft * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Rewind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shafted * Material width: 450–1,700 mm Nodpfxezp R Dps Ad Iewk * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Suitable for printing on: • PET • BOPP • OPA • LDPE • HDPE • PP films