Used Impregnator for sale (73)

Condition: like new (used), Year of construction: 2020, We offer this second hand IWT Moldrup-SPP Hydro-Thermal Treatment Plant Industrial MOLDRUP-SPP plant designed for hydro-thermal modification of timber up to 2,600 mm diameter and 12,000 mm length. Built in heavy-duty stainless steel and engineered for continuous industrial production with fully automatic PLC control. Lhedpfsymxqajx Abcsd Industrial Hydro-Thermal Wood Modification Plant – Ø2,600 x 12,000 mm Industrial hydro-thermal treatment plant designed for efficient and uniform thermal modification of timber in a controlled oxygen-free environment. The plant is built around a heavy-duty Ø2,600 mm × 12,000 mm stainless steel autoclave, handling approximately 15–22 m³ of timber per charge, with operating pressure up to 12 bar (abs). Fully automated via PLC, the system enables precise control of vacuum, pressure, temperature and multi-phase process cycles. The integrated vacuum system ensures safe oxygen removal, while the thermal oil heating system provides accurate temperature management throughout the treatment process. The complete installation includes pressure vessel, heating system, vacuum pump, circulation fan, condensate handling, trolley loading system and safety equipment. Thermal oil boiler skid and emission control equipment are included. Technical documentation available on request. The complete hydro-thermal wood treatment plant is sold as seen / as is. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Additional title: Intermix system with carbonisation unit Water output: 22575 l/h Fruit juice output: 4907 l/h Operation / Control: Control panel, manual Material: Lacquered mild steel frame, stainless steel product contacts Position: Free standing Lodpfsx T Aqfex Abcjhd Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Year of construction: 2023, condition: like new (used), Nordcap Ice Cube Maker with Partial Desalination System This unit comes directly from Miele and has only been used a few times in our test kitchen. Year of manufacture: 2023 For hollow ice cube production Integrated storage container Water-bearing components made of food-grade materials Positive spray system, fully automatic production control Automatic defrosting system (hot gas/fresh water) Soil-prone components removable from the front, pre-installed drain connections Note: A minimum wall clearance of 152 mm must be planned for when installing the unit. ... Partial Desalination System Partial desalination up to 5,600 l with silver-impregnated activated carbon for supplying decarbonized water 0° dH (KH) Nordcap SDE 100 l Connection type: Plug-in Cooling type (machine): Air-cooled External casing: Stainless steel 1.4509, rounded edge protection Inner casing: Polyethylene inner tank, AGION® antibacterial coating, deep-drawn in one piece Self-cleaning system Gross weight: 74 kg Net weight: 63 kg Climate class: 5 (+40 °C ambient temperature and 40% relative humidity) External width: 670 mm External depth: 595 mm External height: 981 mm Year of manufacture: 2023 Refrigerant: R-452A Refrigerant charge: 450 g Electrical connection: 0.83 kW | 230 V | 1 | 50 Hz Output: approx. 100 kg hollow cubes / 24 h Hollow cube dimensions (W x D x H): approx. 35 x 29 x 36 mm Energy consumption: 16.00 kWh/24h List price Nordcap SDE 100 l: €3,789.00 plus VAT List price partial demineralization: €849.00 plus VAT PDF files: Datasheet Operating instructions Declaration of conformity Electrical circuit diagram Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes – new and used – can be found in our shop! Lhodetrd Nzepfx Abced International shipping costs on request!

Year of construction: 1993, condition: ready for operation (used), A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible. Lhsdpfx Absx S Rbvecjd

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation Lhjdpfx Aorhilxebcod • Edge angle 0 to 45 degrees • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500

Condition: used, This listing is for a Millipore Progard TS2 Pretreatment Pack. The unit is in full working condition and is ready for immediate release. The Progard TS2 Pre-treatment Pack is an essential component for enhancing the performance and longevity of various water purification systems, including Elix, RiOs™, AFS, and Milli-Q Integral systems. Key Features: - Particle Removal: Effectively removes large particles and sediments from tap water using a depth filter, which helps maintain the integrity of the downstream purification processes. Lodpfx Abexxyigscehd - Chlorine Removal: The inclusion of silver-impregnated activated carbon efficiently eliminates free chlorine from the water, protecting sensitive membranes from oxidative damage. - Scaling Prevention: Polyphosphates in the pack help prevent mineral scaling on the reverse osmosis (RO) membrane, ensuring optimal water flow and quality. - Organics Protection: The combined components protect against organic fouling, which can degrade the performance of the RO membrane over time. Technology and Monitoring: - e-sure RFID Tag:Each pre-treatment pack is equipped with an e-sure RFID tag, providing real-time visibility into the pack’s parameters. This feature allows for easy tracking of replacement timelines and performance monitoring. Benefits: - Extended System Lifespan: By removing contaminants and protecting the RO membrane, the Progard TS2 pack extends the operational life of the water purification system. - Enhanced Water Quality:Ensures that the water produced meets the high standards required for laboratory applications, minimizing the risk of interference in experiments or processes. - Operational Efficiency: With improved protection from fouling and scaling, the overall performance of the water system is optimized, reducing maintenance needs and downtime. - Applications: Ideal for use in laboratories, research facilities, and industrial applications where high-quality purified water is crucial for experiments, analyses, and processes.

Condition: new, 10000 kg length 6000 mm Lodpfst Dqv Uex Abcohd width 2000 mm loading area height 650 mm Heavy-duty trailers - industrial trailers, available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø415mm, total width 200mm and ball bearings.

Condition: new, 16000 kg length 6000 mm width 2500 mm loading area height 700 mm Heavy-duty trailer - industrial trailer - Made in Germany - Available immediately from stock Lhedpjhrrp Refx Abced Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Steering: - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø425mm, total width 300mm and ball bearings.

Condition: new, 6000 kg length 3000 mm Lhjdpsygx Apjfx Abcod width 1600 mm height 570 mm fest lenkbar size of tyres 406 x 127 mm dimensions of the machine ca. 3,99 x 1600 x 570 mm Heavy-duty trailer with - turntable steering - robust, low maintenance - 30mm impregnated wooden platform - Standard paint finish varies. Available in your RAL color upon request. Need other load capacities and dimensions? Please contact us.

Year of construction: 2008, condition: used, Manufacturer : Dumoulin Model: TD 20 Year: 2008 Type : Coating pan Coater type: solid drum for impregnation Rotor diameter: Ø 700 mm Rotor depth: approx. 550 mm Unloading: automatic by reversing the rotation of the cylinder Spraying: Axflow pump + Endress Hauser Promag 53 magneto-inductive flowmeter (year 2021) Lhsdpfx Absx R A Tnjcsd Air handling unit : not available, controllable from electrical cabinet. Reference available in documentation Siemens PLC and control panel

Year of construction: 2000, condition: used, Manufacturer : Dumoulin Model : TD 1500 Year: 2000 Lodpfx Aox R A Rgjbcohd Type: coating machine Classification: ATEX motorisation and sensors Operating unit: from 4 to 15 kg of mass to be impregnated. Coater type: solid drum for impregnation Turbine diameter: Ø 600 mm Turbine depth: 400 mm Removable mixing blades Materials: 304 L stainless steel Unloading: automatic by reversing the rotation of the cylinder Driven by 0.37 kW geared motor, electronic variable speed drive from 2 to 25 rpm. T°C recorder Timer Rotor speed indicator Ventilation unit integrated into the frame : 1 x EU 13 air filter (absolute filter) 1 x 0.37 kW electric fan 1 x ADF electric heater (heating element) 1500 W with temperature regulator (sensor) 1 x stainless steel nozzle and blower in the drum      

Condition: used, Mixing and coating / impregnation unit by liquid insertion under vacuum or atmospheric conditions and at con Mixer Capacity: 500 L Motor power : 1,5 KW Mixing speed : 37 rpm Type of agitation : elongated blades Maximum pressure : – 1 Barg Max temperature : 200°C Air connection Liquid insertion / spraying connection 3 nozzles free to use if required. Mounted on a tilting frame Mixer rotation: manual. Double jacket Type: heating channels Max pressure: 14 barg Max temperature : 200°C Ledpfx Abex R Anxscshd Other Sold with platform + stairs + feed hopper.

Condition: new, EVA Hotmelt Without Filler 280.30/31 Application Examples: Edge Banding For bonding thermoplastic edge bands (such as ABS, PP, PVC), resin-impregnated decorative paper, veneer edge bands (with or without nonwoven backing), and solid wood edges. As a general rule, the bonding properties and the substrates’ surfaces to be glued (including back-side primers or other surface treatments) must be checked on an application-specific basis prior to use. Processing Instructions: Lhjdpjx Sqnvefx Abced Automatic feed systems can be used for processing the adhesive granulate. The ambient temperature should not exceed 30°C. Depending on formulation, different types of hotmelt adhesives may be incompatible with each other. Therefore, we recommend thoroughly cleaning application equipment when changing products. Further information is available upon request. Processing characteristics may vary depending on the application technology used and variations in feed speed, which can affect the bonding process. Customer trials are required! Typical Technical Data: Processing temperature [°C]: 180 – 200 Feed rate [m/min]: 10 – 40 Appearance: Terminal digit 0 = yellow opaque Terminal digit 1 = white Density at 20°C [g/cm³]: approx. 1.03 ± 0.03 Softening range [°C]: approx. 90 ± 5 (Kofler heating bench) Viscosity at 190°C [mPas]: approx. 66,000 ± 10,000 Heat resistance [°C]: approx. 80 ± 5 Open time at 190°C [s]*: approx. 6 ± 2 Setting time: not applicable * measured on a 200 µm film Technical data determined according to Jowat test methods

Condition: used, Year of construction: 1992, The CO2 target value is entered on the digital controller, causing the CO2 metering valve to open accordingly. The CO2 is introduced into the product stream via an injector and then dissolved and bound in the saturation section. The amount of CO2 in the beverage is monitored by a CO2 analyser and computer. The actual value is automatically compared with the target value and corrected via the CO2 valve if necessary. A CO2 recorder records the actual value. Additional title: impregnation plant Capacity: 20000 l/h Final CO2 content value (operating value) up to: 7 g/l Material: stainless steel Features: CO2 injection; settling section; control cabinet with user interface for CO2 control and CO2 recorder; various pipes, valves, measurement technology Lhjdpfexzqufsx Abcsd

Condition: used, Year of construction: 1994, Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn out of the water jet and escape from the top of the tank. This process is repeated in the second degassing tank. In the third tank (impregnation tank), after entering through the injector nozzle, the water is mixed with the CO2 pressure in the upper part of the tank, which is under impregnation pressure. Lhjdpfx Aexzqt Isbcod Additional title: multi-stage cold deaeration with impregnation Base construction: mounted on stainless steel frame Features: 3 containers (each with pressure gauge); 3 centrifugal pumps; control cabinet with control panel; pipes with various fittings

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: IMBDS63-52-10-45-2/SP/DC/SB, workpiece weight (max.): 120 kg, working height: 2,850 mm, power: 35 kW (47.59 HP), air demand: 24,000 m³/h, compressed air connection: 6 bar, The existing window coating line was in full operation until December 19, 2025. The system is currently still connected to the electrical supply network but will be replaced by a new robotic coating system over the turn of the year. The objective is to find a suitable subsequent user who will professionally dismantle and remove the complete system on their own responsibility at the beginning of the coming year. System Concept Description Loading and unloading of traverses with window frames and sashes takes place via a lifting/lowering station, which allows for ergonomic and process-safe feeding of the system. Impregnation and priming of the workpieces is carried out in a vertical flooding booth. The coating application is performed using the flooding process via vertically arranged coating nozzles. This is followed by a drip-off and drying zone, where the traverses are guided in an inclined position. The first drying tunnel has a buffer capacity of approx. 40 traverses. Drying is achieved by means of warm air generated from a hot water system with a supply temperature of approx. 85°C. A switching unit enables workpieces to be routed either to a second impregnation/priming stage or directly to the subsequent coating section, as required. The coating section consists of a lifting stand with integrated electrostatic application (E-Statik). Coating is performed on one side only, supplemented by an automated turning unit, allowing workpieces to be returned to the spray system for a repeat coating pass. Lhedpfx Abex Npzcscod The second drying tunnel enables buffering of approx. 50 traverses. Here as well, drying is by warm air supplied by a hot water system at approx. 85°C. A buffer section after the second drying tunnel with a capacity of about 25 traverses serves as a transfer area to the unloading station.

Condition: used, functionality: fully functional, working width: 5,880 mm, total width: 1,800 mm, total length: 6,000 mm, total height: 1,100 mm, height adjustment type: hydraulic, We are offering this used impregnation unit/dip tank. Everything is fully functional. The hydraulic pump operates correctly. Dimensions: Length: 600 cm Lhsdpjx Ux Ntjfx Abced Width: 180 cm Depth: 110 cm If you have any questions or would like more information, feel free to send us a message or give us a call.

Condition: used, Length 2700 mm Width 1100 mm Lsdpfonl Nqqox Abcohd Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))

Condition: used, Year of construction: 2020, carrying capacity 5000 kg length 5000 mm width 2000 mm height 500 mm weight 1250 kg length in total ca. 6300 mm transport measurements ca. 5900x2000x500 mm Like new, only used 3 times Lhjdpfx Abew I Hqweced Heavy-duty trailer with double swivel steering - Small turning circle - Tilt-proof thanks to steering angle limiter - Robust, low maintenance - Reversible drawbar - 30 mm impregnated wooden support. - Coupling eye diameter 40 mm - Tire dimensions approx. 425 x 260 mm

Condition: excellent (used), IwoTech Wood Treatment Autoclave, 161 m³, 12 bar For sale: fully operational wood impregnation autoclave manufactured by the renowned company IwoTech A/S. This large-capacity unit is ideally suited for professional treatment of significant volumes of timber, making it an attractive solution for sawmills, construction companies, and manufacturers of outdoor landscape elements. Key technical parameters: Manufacturer: The Danish Treting Co Ltd, IwoTech A/S, DK-7330 Brande Serial number: 10838 Year of manufacture: 1996 (reconstruction date: 26.08.1996) Volume: 161,000 liters (161 m³) Design pressure: Internal: 12 bar External: -1 bar (vacuum) Permissible operating pressure: -0.95 to 10 bar Design temperature: 50°C Dimensions: Internal diameter: 3,000 mm (3 m) Total length: 21,425 mm (21.425 m) Material: HSB 40 SS steel Weld factor: Z = 0.8 Pressure test (hydrostatic): 16 bar Hydrostatic test date: 26.08.1996 Application: Pressure-vacuum impregnation of wood. Additional equipment: Feed valve: 1 pcs Discharge valve: 1 pcs Drain valve: 1 pcs Two impregnant storage tanks Temperature measuring device: 1 pcs Pressure measuring device: 1 pcs Condition: The autoclave is in good technical condition and ready for operation. Supplied with full documentation, including certificates and technical drawings confirming its parameters and compliance with standards (EN287-1). This is a reliable unit that will provide many more years of service. Set includes: - Complete autoclave - 2 impregnant storage tanks - Full technical documentation, drawings, and certificates (including hydrostatic test report). Please contact for more information or to arrange an inspection. Lhsdpfx Aew S Nz Tobced

Condition: used, Pressure vessel Diameter 1 .400 mm Length 4.100 mm Volume: 6.500 litres of preservative Wood volume: app. 3,2 m3 per charge Pressure: 0 to 3 bar (abs) Material: 10 mm HII boiler plate/P265GH Wood pack size: max 1 ,00 m x 0,80 m x 4,20 m Door: 1 rapid closure door Complete with internal rails and an anti-float sy stem for the trolley s Storage tank placed next to the autoclave Volume: 10.000 litres of preservative Diameter: 1 .600 mm Length: 5.350 mm Lhjdetnmz Njpfx Abcjd Material: 5 mm steel plate 1 .0037 acc. to EN10025

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 0400-01-0010000, type of input current: AC, overall weight: 2,750 kg, input voltage: 10,000 V, input frequency: 50 Hz, total height: 1,953 mm, total width: 1,000 mm, total length: 1,600 mm, warranty duration: 72 months, nominal power (apparent): 1,000 kVA, nominal power: 1,000 kW (1,359.62 HP), secondary voltage: 400 V, protection type (IP code): IP00, temperature: 40 °C, empty load weight: 2,750 kg, space requirement width: 1,600 mm, space requirement length: 1,000 mm, space requirement height: 1,920 mm, ambient temperature (max.): 40 °C, roll spacing: 820 mm, Equipment: documentation/manual, type plate available, Three-phase cast-resin transformer Designed according to DIN EN 60076-11, VDE 0532, with separate winding Reduced no-load losses in accordance with Ecodesign Regulation EU No. 548/2014, Eco Directive 2009/125/EC Design features: - Flame-retardant and self-extinguishing - High-voltage winding vacuum-encapsulated, low-voltage winding vacuum-impregnated - Partial discharge-free (< 5 pC) Ljdpfx Aov U Ncrobcshd - Taps can be changed in the de-energized state using switch lugs - Mobile design, 4 interchangeable transport rollers - Winding material: aluminum/aluminum - 4 lifting eyes, 4 draw eyes, 2 grounding screws - Documentation: Dimensional drawing, nameplate, data sheet, circuit diagram, operating instructions in German/English - Use of double-sided insulated, grain-oriented, low-loss electrical steel sheets - Reduced power losses A0 Level 2/Ak (Eco Directive 2009/125/EC) - Suitable for converter operation, THDu < 5% - 3x PT100 connected to terminals in the terminal box (IP 54) RATED POWER: 1000 kVA CIRCUIT: Dyn5 OVERVOLTAGE: 10 kV, with a value of ± 2x 2.5% FREQUENCY: 50 Hz UNDERVOLTAGE: 400 V + N SHORT-CIRCUIT VOLTAGE: 6% (tolerance ±10%) NO-LOAD CURRENT: 0.6% (tolerance +30%) INSULATION LEVEL HV (AC/LI): 12/28/75 kV – L2 INSULATION LEVEL LV (AC/LI):

Condition: used, machine/vehicle number: 39500, empty load weight: 8,250 kg, maximum load weight: 31,750 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 05/1995, tire size: 235/75 r17,5 zwilling, Year of construction: 1995, Further information Main and outer frame made of high-strength double T-profiles, grade ST 52.3, 4-fold longitudinally profiled, with high-strength front and rear ends and crossbars, frame behind the bogie run-through with flat offset offset and rear ramp slope 0.8 m long, lowest floor height due to recessed wheel wells above the rear wheels, front corners of the bogie platform bevelled at 45 degrees. 2 recessed UVV lashing rings each on the bogie platform and the drive-on ramp for attaching tensioning devices Rear end with wide bearings for ramp shaft with 6 bearings. Setiliche protective device with a protective strip according to EC, wheel chocks with clamping safety device Low-maintenance angular roller bearing axles with automatic slack adjusters, dual-line air brake system in accordance with EC and parking brake Bogie and drawbar: : Made of double T-profiles in welded construction with ball bearing slewing ring, standard drawbar length 1500 mm, with 8 eyelets 50 mm on average, drawbar support with threaded spindle as height adjustment device, vehicle has no axle compensation! 24 volt, 2 connecting cables 7-pole interchangeable, large rectangular four-chamber lights incl. shunt lights and reversing lights, distribution box at the front, clearance lights at the rear, side marker reflector lights and holder for single-line license plate Underbody made of 40 mm thick pine wood, pressure-impregnated. Low loading platform and drive-on ramp with crossed top floor 30 mm thick, running lengthwise. Overall floor thickness 70 mm. Bogie platform with longitudinal single floor and recessed, open equipment box, size L 700 x W 800 x D 180 mm Lsdpfx Asi Rixgsbcjhd Ramps: in shit construction with trough plate, cross beams, wooden decking running lengthwise, 50 mm thick, ramp tip reinforced, ramp holding rods with turnbuckle and safety catch, ramps can be moved on both sides by 470 mm each, with perforated rail and sliding tube, ramp shaft made of bright steel, articulated arm spring lifter with outer and inner springs for easy one-man operation, with automatic floor supports steel grit blasted, zinc phosphate primed, single color acrylic paint in RAL colors, wheels silver, traffic, light and metallic colors as well as two-tone paint, wood varnished

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, loading space volume: 24 m³, loading space length: 4,900 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, HIRE PURCHASE * LEASING* FINANCING AT TOP CONDITIONS Iveco Daily 35S18HA8  MY24  Wheelbase 4100 mm, single rear axle wheels Color: white (Iveco 50105) EURO 6 Engine: capacity 3.0 liters Maximum power 176 HP (130 kW), maximum torque 440 Nm in the range of 1600 rpm, 4 cylinders in a row, Variable geometry turbocharger VGT Gearbox: 8-speed automatic Braking system: discs on both axles (ventilated at the front) Electrical installation: 12V, Tires / wheels: 225/65 R16C, single rear axle wheels Lhsdovpcu Ropfx Abced Front suspension: independent with torsion bar integrated with the telescope Double acting shock absorber Rear suspension: rigid Beam, leaf springs with bumpers, stabilizer. Hydraulic telescopic shock absorbers Two-way action Axle pressure: front 1900 kg, rear 2240 kg Driving safety is ensured by the following systems: ESP 9, ASR, ABS, EBD, Hill Holder, MSR, HBA, LAC, TSM, RMI&ROM Above-average equipment: COMFORT PLUS: ? NAVI MY IVECO infotainment system with 10-inch display ? Attack cruise control (ACC) with radar sensor ? Cabin ventilation and heating system with automatic air conditioning ? Padded comfortable driver's seat (3 adjustment levels, lumbar support, armrest) ? Front fog lights ? USB A+C socket on driver and passenger side ? Full headrests covered with memory foam, Daily logo ? Fixed 2-seater passenger bench with folding table, 3-point seat belts STYLE: ? Daily radiator dummy with chrome strip ? Leather steering wheel ? Full LED lights (day, dipped beam, road) Additionally, the price of the vehicle includes: 73024 - Side mirrors on the shoulders 2.35 m 06064 ? Double parabolic springs for models Building type: International.   Approximate dimensions: - Intr. length 5000 mm, - Internal width 2250 mm, - Internal height 2350 mm, Standard equipment: ? Intermediate frame with ground binding: aluminum stays + aluminum crosses ? Anodized aluminum sides with a height of 400 mm on Sunday, over 3600 mm length internal split buildings ? Climbs for quick disassembly and side loading ? Aluminum frame under the tarpaulin lined with impregnated wooden slats ? Flooring with 15 mm thick waterproof non-slip plywood ? Plastic wheel arches with anti-mud aprons mounted above the rear axle wheels ? Entrance step on the rear ? Front wall of the side + impregnated wooden boards ? Fasteners made of anodized aluminum ? Contour handles that prevent the load from moving during transport, the amount depends on the length of the installation ? Tarpaulin in any color, translucent roof (close with a cable) ? Foldable side anti-run slats (set) Additional equipment included in the price: ? 1-sided sliding tarpaulin with tension ? Sleeping cabin (TopSleeper) CARPOL ELKA ? Rolled rear tarpaulin ? Toolbox ? Water tank ? Auxiliary heater ? Rolling rear tarpaulin Welcome to carmax24 Today you have the opportunity to purchase one of our selected, tested vehicles. Expert-tested and high-quality vehicles ensure high customer satisfaction and have done so since 2008. This is our daily approach, because you as a customer are our number one priority at carmax24

Condition: new, machine/vehicle number: G-CL-350-FR-EC, input voltage: 230 V, volume flow: 350 m³/h, noise level: 61 dB, total height: 600 mm, total length: 430 mm, total width: 340 mm, overall weight: 40 kg, ISI G-CLEANER Mechanical air filter device Type: 350 FR Version: Mobile Control: without Horizontal, mobile mechanical air cleaner with EC radial fan for separating gaseous substances. TECHNICAL DESCRIPTION: Air volume: Ledpfx Abovrygpecshd - 390 m³/h (free blowing) - 350 m³/h (effective) (depending on the filter configuration without capture elements) Air inlet: top rear with 4 connections 50 mm Filter configuration: - Pre-filter mat F 5 - HEPA filter H13 according to DIN EN 1822-1 - Activated carbon cassette with 9 kg of pressed, specially impregnated shaped carbon Color: RAL 7035 light gray (optional: special color) Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air output: adjustable Noise level: 61 db (A) Dimensions: length 430 mm / width 340 mm / height 600 mm Weight: 40 kg