Used Induction Melting Furnace for sale (1,633)

Condition: refurbished (used), Heating: electric Air circulator: 1 Temperature: 400°C Internal dimensions: (approx.) Width: 700 mm Height: 450 mm X Depth: 1300 mm X Can be increased to ~ 700 mm clear height by changing the furnace floor. External dimensions: (approx.) Width: 2200 mm Height: 2700 mm Pjdpfotukp Esx Akfsgk Depth: 2500 mm Heating output at 400 V = approx. 15 Y /45 Δ KW + approx. 2.2 kW for heating gas circulator + approx. 1.1 kW for door lift (The furnace is originally designed for 500 V)

Condition: used, Year of construction: 2018, PUJOL LAM PRO – Year 2018 Lamination Furnace Podoyvgvkjpfx Akfjgk Internal dimensions 2800 x 4000 mm Power 40 kW

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Construction The system essentially consists of: Podpfx Akjyt Ihbefegk • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.

Year of construction: 1997, condition: like new (used), Maximum temperature: 1290 °C Interior dimensions: 630 x 530 x 760 mm Electrical connection: 400 V kW Space required: 1200 x 870 x 1810 mm Pgsdpfxet Ebpuj Akfjk Weight: 470 kg Heating output: 16.5 kW

Condition: good (used), Year of construction: 2016, Maximum temperature: 650°C Pgjdsxb A E Aepfx Akfek Internal dimensions: Width 650 mm Depth 750 mm Height 600 mm Electrical connection: 380 V, 20.7 kW Weight: 390 kg Space requirement: 1600 x 1200 x 1800 mm

Condition: used, Year of construction: 2007, machine/vehicle number: MBI18, Used Kosme Monocombi 2T Hot Melt Case Packing Monoblock This second hand Kosme casepacking monoblock is designed for reliable bottle grouping and carton closing within a compact industrial packaging footprint. Built to support demanding beverage production environments and other bottling applications, it handles bottle collation into 6-bottle cartons and applies hot melt closure in a single integrated unit. Its monoblock architecture reduces footprint, simplifies integration on a used bottling line, and streamlines operation and maintenance. Manufactured by Kosme, a recognized brand in bottling and packaging machinery, this model features an additional bottle centering device tailored for Authentique bottle handling, improving infeed stability and pack quality. Suited to both PET and glass bottles, it aligns well with beverage production requirements where consistent case presentation, secure hot melt sealing, and repeatable format results are essential. With a practical power rating of 8 kW and manuals available, the machine supports efficient commissioning and routine upkeep for continued performance in industrial packaging operations. Technical Specifications & Performance Data Pedexywb Aepfx Akfsgk Manufacturer: Kosme Model: Monocombi 2T Year of manufacture: 2007 Machine category: Casepacking Monoblock Pack format: 6-bottle cartons Closure system: Hot melt Power: 8 kW Container handling: PET and Glass bottles Included device: Additional bottle centering for Authentique bottle Documentation: Operating and maintenance manuals available Advanced Automation & Control Systems The monoblock layout integrates bottle collation, case loading, and hot melt closing for streamlined automation. Operator-friendly controls support quick setup and routine adjustments. The hot melt gluing system ensures consistent sealing quality with minimal operator intervention, improving uptime and minimizing rework in continuous production. Production Line Integration Capabilities Engineered for straightforward integration into a used bottling line or as a standalone casepacking station, the machine interfaces with upstream conveyors and downstream palletizing solutions. Its compact monoblock footprint helps optimize floor space while maintaining access for changeovers and maintenance. The 6-bottle carton configuration fits common beverage logistics standards and can be combined with typical secondary packaging flows in beverage production. Machine Condition & Maintenance History Offered as second hand industrial packaging equipment, this machine comes with operating and maintenance manuals, facilitating proper setup and care. The presence of manuals supports efficient maintenance routines and helps sustain long-term reliability on the production floor. Operational Performance & Versatility Designed to handle both PET and glass bottles, the machine is suitable for beverage plants looking for dependable case formation and hot melt sealing. The additional centering device for Authentique bottle enhances stability at infeed and improves grouping accuracy before loading into cartons, contributing to consistent p...

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Electrical cabinets included. It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Pgjdog R Sh Aepfx Akfsk Wide Range of Used Machinery, Industrial Equipment

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 400220/659/2017, functionality: fully functional, temperature: 650 °C, inner dimension length: 600 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, overall weight: 2,500 kg, Equipment: CE marking, documentation/manual, Warwick dry nitriding furnace, in very good condition, like new. Pgodpfxey Eg U Eo Akfsk

Condition: new, - Dimensions: 700x750x750/1050 mm - 1 heating zone - Cooking plate diameter: Ø 300 mm - Electric power: 5 kW Pjdow Em A Nopfx Akfogk - Voltage: 400 V - Frequency: 50/60 Hz - Net weight: 62 kg

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Reference number: 118004 Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Frequency: 50 Hz Fuel: natural gas Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Gas operating pressure: 8 kPa Podpeycvxmsfx Akfsgk Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C TNV temperature: 930 °C Usable volume: 4.3 m³ If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: seco, Used Heat Treatment Furnace for Aluminium Alloys Make: SECO WARWICK Model: SDBF-24.16.30/600E Year of manufacture: 2014 Pgsdpfx Ajx Tbf Uokfjk EXPERIENCE SECO/WARWICK is a global leader in the development, design, and manufacture of furnaces and systems for the heat treatment of aluminium alloys. SECO/WARWICK has delivered numerous solution heat treatment, aging, and annealing furnaces for processing aluminium alloys from both wrought and cast materials. All technical solutions presented in this offer are proven and have already been successfully implemented by SECO/WARWICK in furnaces for a wide range of applications within the aluminium industry. A significant number of these furnaces have been supplied to the aerospace industry and meet their particularly stringent requirements as well as all relevant standards and regulations. CAPACITY The data provided by the customer forms the basis for the system design and also serves as the foundation for the guaranteed performance of the line. The system is designed for the heat treatment of aluminium pistons and cylinder heads.

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: 16109, Electrotherm HL-36x50-EQ-2 Vacuum Furnace Chamber (1997) Stokes Vacuum Pump System Digital Display Controller Pgedpfsx Ap N Rex Akfek Slide Rail Track Part Entry Cart 1300 Max Temp Sublocation - Heat Treatment area.

Condition: used, Year of construction: 2007, Glass tempering furnace GMC FOR GLASS INDUSTRY THF 150300S - Year: 2007 1500x3000 mm Pedpfox Hxutox Akfjgk 210x75 mm 2.8-19 mm 16380x5000 mm 400 V Control cabinet – 2 pcs Computer with monitor, mouse, keyboard Additional computer Roller table 3500x1550 mm – 2 pcs

Condition: used, Year of construction: 1975, Manufacturer : Oskar Krieger Maschinen Model: Fondo Mat Universal 500 Year : 1975 Type: Melter / process vessel   Classification: ATEX Up/down: hydraulic unit Mixing head rotation: manual Stainless steel coil: liquid and/or steam Mixing: 705 rpm Vacuum and pressure tight lid : -1 / +1 bar Pjdjx R Dbtjpfx Akfjgk Maximum temperature: 140°C diameter of filling port: DN200   Vessel : total capacity: 700L useful capacity: 500L capacity up to tank rim: 615 L pressure: -1 / 3 bar temperature: 130°C recommended drain valve size: DN40   Jacketed : capacity: 68 L pressure: 6 bar temperature: 160°C insulation thickness: 45mm   Weight: 1520 kg Can be combined with the following equipment: Technical documentation available.    

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Podpofzccnofx Akfogk 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Podpefx Nfmjfx Akfogk Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2026, Recirculating Chamber Furnace, electric, new unit, delivery time 12 weeks - Temperature: 300°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm - Capacity: 9,000 liters - Control: Eurotherm Nanodac, 100 programs with 25 segments each; additional 100 programs can be stored/loaded via FTP or a USB flash drive - 2 recirculating air fans - Double doors with safety door sensors - Over-temperature protection: Eurotherm 3216i - Control/recorder unit with color touch display - Robust steel construction, exterior in anthracite - Motorized dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating power: approx. 70 kW - Entry rails, recess for cart loading - Documentation, CE declaration of conformity - Electrical schematic with spare parts list We are happy to offer transport, installation, and staff training upon request. Pgedpfxjlkb Ezo Akfjk Also available as a new unit with exhaust fan and other equipment! Delivery time approx. 10–12 weeks. Please contact us! We offer new and used industrial furnaces, which we can also modify and upgrade according to customer requirements. Inspection in our machine hall possible at any time by appointment. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heating cabinet, recirculating air oven, chamber furnace, heating up oven, chamber recirculation air oven, annealing oven, tempering oven.

Condition: used, TECHNICAL DETAILS Pgodsug U Thepfx Akfek Quenching tank for stirring oil quenching - power : 0.25 [kW] - voltage : 3 x 380 [V]

Year of construction: 2024, condition: new, Horizontal Oil Quenching Furnace Technical details: Size range: 450x350x300 up to 1200x800x800 Load capacity: 100 kg to 1200 kg Transferring duration: maximum 29sec, to lower than 17sec Ultimate temperature: 1320°C Podpfx Aket D Tkuefjgk Final Vacuum: 10-1/10-4 Pa Temperature Uniformity Survey (TUS): ≤±5 °C Pressure Rise Rate: ≤0.5 Pa/h Cooling gas pressure:

Condition: reconditioned (used), Year of construction: 2009, machine/vehicle number: SN FX036084, functionality: fully functional, 12 months warranty, in stock, excellent condition Resistance-heated system with gas-tight furnace muffle - Continuous operation Tmax 800°C - Max. temperature approx. 900°C (under protective gas) - SE-402 programmable controller - 3-zone heating - Gas supply system: 2 different protective gases, as well as fuel gases - Gas circulation - Vacuum system - Inner muffle dimensions (W x D x H): 580 x 830 x 1500 mm (special length) - Muffle volume approx. 722 liters Pgsdjyxlwrspfx Akfjk - Max. charge weight approx. 1000 kg - Two-stage rapid cooling with frequency converter - Flare-off device with flame monitoring - Sight glass DN150 - Max. gas operating pressure 7 mbar - Mains voltage 400V, 3-phase, N, PE - Heating power 70 kVA - Rated current 3 x 97A - Weight 1900 kg - External furnace dimensions (W x H x D): 1700 x 1950 x 2750 mm - Control cabinet (W x D x H): 510 x 1360 x 500 mm - Operating manual, circuit diagrams, CE declaration The furnace is offered reconditioned (all switching electrical components such as contactors, etc. have been replaced with new ones), new sealing, electrically tested incl. measurement protocols. Inspection in our warehouse by appointment! Furnace, industrial furnace, melting furnace, tilting crucible furnace, crucible furnace, aluminum melting furnace

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: #20206, overhauled, delivery time 3–4 weeks, with 12 months warranty - Internal dimensions (WxHxD): 1200 x 1950 x 1000 mm - Capacity: 2,300 liters - Max. temperature: 1280°C - Siemens S7 control system with touch panel - 2 kiln cars for interchangeable use - Kiln car with heavy-duty wheels and tow bar, freely movable on the shop floor, completely overhauled - Multi-zone design (3 zones) - Automatic exhaust dampers / supply air fan - Separate control cabinet - All contactors and thyristor controls newly installed - TWB with its own thermocouple Type S, new - All furnace heaters new - Control cabinet fan and intake fan new - Power rating: 130 kW Podpfx Akeyk U Iiefogk - Current consumption: 190 A - Furnace weight approx. 2,500 kg + each kiln car 1,000 kg - DGUV V3 safety inspection current, including test report - Documentation, CE declaration, circuit diagrams We are happy to offer installation, commissioning, and staff training. Please contact us! We supply new and used industrial furnaces. On-site inspection in our warehouse upon request! Keywords: kiln car furnace, bogie hearth furnace, furnaces, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, oven, tempering furnace, curing furnace, drying oven, industrial furnace

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Max temperature: 1000°C Pedpfx Ajxcb Hnokfegk

Condition: good (used), Internal dimensions 250 x 400 x 160 mm Pgjdpfx Aovhazfokfjk Temperature 1150° MARCELS MASCHINEN AG

Condition: ready for operation (used), Year of construction: 2001, total width: 1,500 mm, total length: 3,000 mm, Glass tempering furnace 4-19 mm, loading 1.5 x 3 m, without convection, furnace is connected, machine is operational but requires improvements, on-site testing possible. Podox Dy Sfopfx Akfsgk

Condition: ready for operation (used), Power: 11 kW, tank capacity: 20 L, weight: approx. 95 kg. On-site inspection is available. Pjdpfx Aksyxgr Dsfegk