Used Pressing Cushion for sale (12,488)

Year of construction: 2000, condition: ready for operation (used), Columbus C S Contura Hodpfx Aovg Inkeirjw Permanently elastic press cushion for every veneer press 2200 x 1000 mm

Condition: used, Double-column hydraulic press, NEFF type RHS 125 Z Hydraulic drawing press Machine no. 3973, year of manufacture 1983 Pressing force 125 tons Hodpfx Asguvtlsirow Column width 1050 mm Column opening, side 550 mm Table area 1000 x 800 mm Ram area 1000 x 800 mm Ram stroke 350 mm Installation height max. 750 mm Table height above floor 960 mm Drawing cushion force approx. 12 tons at 105 bar Drawing cushion stroke 100 mm Through-hole in the table Ø 202 mm Rapid traverse speed, downward approx. 360 mm/sec Rapid traverse speed, upward approx. 360 mm/sec Working speed approx. 36 mm/sec Oil tank capacity approx. 1000 liters Motor power, main pump 22 kW Motor power, control pump 4 kW Motor power, control pump 2.2 kW Power connection 400 volts, 50 Hz - Hydraulic drawing cushion under the table with a hole through the table plate Ø 202 mm - Precise 4-way column guidance on the ram corners - Stepless pressing force adjustment - Adjustable fixed stop, electrically controlled via a hydraulic motor - Stroke damping - 2-hand control panel for releasing the lifting motion on the press - Control cabinet positioned next to the press (1600 x 500 mm) - Documentation including operating manual, electrical wiring diagram, and PLC program printout available Space required for the press L x W x H 2600 x 2400 x 4270 mm Weight approx. 14 tons Good condition

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram Hjdpsyupuljfx Airsw - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: REP 01.23, functionality: not functional, pressing force: 1,000 t, table length: 1,000 mm, retraction force: 400 t, Equipment: CE marking, safety light barrier, We are offering this defective REPKON RHHP 100 1000/400 kN hydraulic press with a draw cushion, manufactured in 1999. Manufacturer: REPKON Model: RHHP 100 1000/400 kN Year of manufacture: approx. 1999 Hsdpfx Ajzub Nmjirow Control system defective If you have any questions or require further information, please do not hesitate to contact us.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS PRESS Pressing force: 40 t Drawing cushion force: 40 t WORK TABLE Table dimensions: 700 × 630 mm Number of table slots: 3 MACHINE DETAILS Manufacturer: LAUFFER Machine type: Hydraulic press Length: 1,000 mm Width: 800 mm Hedpfxo Ad Hq Sj Airew Height: 2,500 mm Weight: 10,000 kg

Condition: used, Technical details: diameter of piston: Ø 160 mm weight: 200 kg dimensions: 0,6 x Ø 0,3 m draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diameter 118mm hydraulic connection 2x 1 inch Hodpfx Aiju Nurforew *

Condition: good (used), Year of construction: 2023, functionality: fully functional, Cushion Pack CP 428 S2i/6 packaging cushioning machine (cardboard shredder) in fully functional condition: Year of manufacture: 2023 Power: 3 kW Cushion width: up to 420 mm Infeed height: 20 mm Hodpfx Aozpwnzsirsw Shipping via a freight forwarder is possible after consultation. #8552-1

Condition: ready for operation (used), Year of construction: 1981, operating hours: 376 h, functionality: fully functional, machine/vehicle number: 01031, table width: 570 mm, table length: 670 mm, overall weight: 10,000 kg, clamping force: 400 kN, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Closing force: 400 kN Table dimensions: 670 × 570 m MACHINE DETAILS Operating voltage: 380/260 V Frequency: 50 Hz Rated current: 25 A Power: 7.5 kW Hedpfoz Iluqex Airow Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,900 x 3,200 mm Weight: 10,000 kg Recorded operating hours: 376 h External reference: Alesco - Lot 76

Condition: used, Year of construction: 1967, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Hodpfx As Aa Ntneirsw Pressure: 80 t Stroke rate: 125 strokes/min Total power requirement: 9.5 kW Machine weight: approx. 4.4 t Stroke and ram data Stroke: 20–120 mm Ram dimensions: 560 × 355 mm Ram adjustment: 72 mm Working area Overhang: 280 mm Table Table width: 710 mm Table depth: 560 mm EQUIPMENT UVV – accident prevention regulation

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: NEFF Type: RHS 25 Year of manufacture: 1981 Machine number: 3,786 Hsdpfs Ad H Ttsx Airjw PRESS DATA Press force: 25 t Table dimensions: 600 × 360 mm ELECTRICAL DATA Operating voltage: 380 V Frequency: 50 Hz Rated current: 35 A Connected power: 7.5 kW MACHINE DETAILS MACHINE DIMENSIONS Length: 1,600 mm Width: 1,200 mm Height: 2,100 mm Weight: 3,000 kg

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 000163, color channels: CMYK, paper weight (min.): 45 g/m², paper weight (max.): 80 g/m², total length: 16,000 mm, total width: 3,500 mm, total height: 4,500 mm, space requirement length: 20,000 mm, space requirement width: 6,000 mm, space requirement height: 6,000 mm, year of last overhaul: 2020, type of input current: three-phase, input voltage: 380 V, cutting length (max.): 630 mm, section length (max.): 1,000 mm, Equipment: documentation/manual, kitap,jurnal,gazet çap enjam.Sagatda nominal25000 şertli önüm.(maksimal 35000 çenli)tizlik.wertikal gurnama çap guraly 4+4CMYK. Jf35 epleýjili,63sm kesiji,üç görnüş epleýiş,doly işjeñ ýagdaýda.Rulon oturtma iki rulonly.4+4 CMYK Hodpfxoz A Uz Ae Airjw

Condition: like new (used), Year of construction: 2003, functionality: fully functional, Heidelberg SM 74-4-H 2003 Model Hodpfx Aj Agpx Neirow 41 million impressions Alcolor CP-2000 Autowash AutoPlate

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: EHT Type: EHP 8-25 Year of manufacture: 1992 Hsdpfx Aie Adzr Rorew Machine type: Press brake Performance Data Press force: 800 kN Press force: 80 t Working length: 2,550 mm Bending length: 2,550 mm Frame width: 2,550 mm Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 22 V Rated current: 29 A MACHINE DETAILS Dimensions Length: 3,000 mm Width: 2,200 mm Height: 2,500 mm Weight Machine weight: 7,000 kg

Condition: good (used), Year of construction: 1992, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 115 t, stroke length: 400 mm, total length: 3,480 mm, total width: 1,570 mm, total height: 2,240 mm, overall weight: 4,900 kg, HP115, year of manufacture 1992, printing size 3000 x 1350mm, 6-cylinder, cylinder diameter 80mm, emergency stop pull cord, gold-anodized plates, maximum printing pressure 115t, operating pressure 365 bar, machine number: 15238. Hjdpfx Aj Agvk Isirew

Condition: excellent (used), Year of construction: 2006, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Machine type: hydraulic CNC bending press Manufacturer/Model: TRUMPF TrumaBend V1300 Year of manufacture: 2006 Operating hours: 109,800 h Approximate weight: 12,950 kg Performance data Press force: 1,300 kN Bending length: 3,230 mm Free clearance between uprights: 2,690 mm Overhang: 420 mm Stroke: max. 215 mm Optional stroke: 445 mm Table-beam distance: max. 505 mm Optional table-beam distance: 735 mm Usable installation height: 385 mm Optional installation height: 615 mm Table width: 120 mm Working height: 1,050 mm Angle of ram: ±10 mm Hodoz S D Tuepfx Airew Back gauge and tool clamping Back gauge system: 4 axes Upper tool clamping: hydraulic Crowning: CNC Machine dimensions Length: 3,640 mm Width: 2,060 mm Height: 2,285 mm EQUIPMENT 4-axis back gauge system Hydraulic upper tool clamping CNC crowning

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm heating plate top: elektric heating plate bottom: defective plate surface: ALU - anodized pressure: 90t number of cylinder: 4 electricity: ca. 33A machine length: 3000 mm machine width: 1500mm Hsdpjx Edl Eofx Airjw weight: 4000kg

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 8160, working width: 680 mm, number of drawers: 4, roll width: 1,000 mm, type of input current: three-phase, overall weight: 5,000 kg, total length: 6,000 mm, total width: 2,000 mm, We offer this used Windmöller & Hölscher 8160 flexographic printing machine, manufactured in 1980. Manufacturer: Windmöller & Hölscher Maschinen-Fabrik Plant location: 454 Lengerich/Westfalen Model type: 8160 Order number: 22840 Country of origin: Western Germany If you have any further questions or require additional information, please do not hesitate to send us a message or call us. Hjdpfxs Advnts Airew

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 1,500 mm, overall weight: 1,145 kg, No minimum price – guaranteed sale to the highest bidder! The press is in new condition and has not yet been used! TECHNICAL DETAILS Press force: 100 t Stroke: max. 380 mm Table width: 1,500 mm Hedpfj Af Hd Usx Airjw Height adjustment: 1,000 mm Ram speed: 10 mm/s Column spacing: 1,500 mm MACHINE DETAILS Press type: Single-acting Drive system: Conventional Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 2,100 mm Net weight: 1,145 kg Number of transport packages: 1 EQUIPMENT CE marking CE certificate Documentation

Condition: used, Year of construction: 1990, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Press brake Hsdpfxs Aa Aanj Airow Condition: good Performance Data Pressing force: 80 t Bending length: 2,505 mm Frame width: 2,200 mm Total power consumption: 7.3 kVA Machine weight: approx. 5.6 t Control System Control: AMADA-MELDAS NC 9 F Controlled axes: 7 Dimensions Space requirement: approx. 3 × 2.25 × 2.20 m EQUIPMENT Detailed machine documentation available

Condition: used, Year of construction: 2016, operating hours: 17,381 h, functionality: fully functional, machine/vehicle number: 500015294, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, total width: 9,152 mm, total height: 7,749 mm, total length: 38,975 mm, type of input current: three-phase, input voltage: 400 V, input current: 213 A, overall weight: 30,000 kg, pressure: 300 bar, transport height: 2,800 mm, pressure (max.): 330 bar, opening width: 970 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, control cabinet length: 3,000 mm, oil tank capacity: 2,000 l, empty load weight: 25,000 kg, operating pressure: 300 bar, transport width: 2,500 mm, transport length: 12,000 mm, input frequency: 50 Hz, Equipment: documentation/manual, We are offering for sale a HSM VK 8818 R FU channel baling press (compact in-line version) with Stadler brand conveyor in very good condition. The machine has been maintained and serviced by manufacturer HSM throughout the past 10 years. The price covers the complete equipment, exactly as shown in the pictures. Hodpfo Agbq Ssx Airew Terms for sale: - The sale includes the complete equipment - Baling press, conveyor system, maintenance platform, wire stations, safety modules, documents, drawings, manuals - The buyer is responsible for dismantling and loading and transportation of the machine. If needed we can arrange dismantling and transport by 3rd party based on mutual agreement. - Complete service history and service reports are available for request For further information or to arrange an on site visit please contact us.

Condition: like new (used), Year of construction: 2025, COLUMBUS MOVE – The space-saving professional vacuum press for maximum flexibility Full performance. Minimal space requirements. The COLUMBUS MOVE was specifically developed for operations wishing to work professionally with vacuum technology—even with limited space available. Hsds Afxvzepfx Airsw Thanks to its mobile and compact design, the press can be easily stored after use, freeing up valuable workshop space. Ideal for: * Veneering * Laminating/form gluing * Coating * Curved workpieces * Flexible custom production Your benefits: * Space-saving MOVE system * Mobile and flexible use * Heavy-duty industrial construction * Lifetime guarantee on the machine structure * Premium BECKER vacuum pump * Quick-change membrane system * Connection for external vacuum bag * Simple operation and high operational safety COLUMBUS 360° included: With a practical manual, Master Manual, and AI support, you benefit not only from state-of-the-art technology but also from decades of application expertise. Technical specifications: * Usable area: 3050 x 1350 mm * Maximum payload: 1.0 t * Maximum workpiece height: 600 mm * Vacuum pump: BECKER 40 m³ * Weight: 670 kg Particularly attractive for companies seeking flexible production while making efficient use of valuable workshop space. COLUMBUS has been developing professional vacuum technology for woodworking operations for nearly 50 years. Viewing and personal consultation gladly by appointment.

Condition: used, Year of construction: 1979, Press length: 3000 mm Press depth: Vertical pressing elements: 6 Horizontal pressing elements: Pressure system: pneumatic Pressing pressure: per cylinder Cylinder stroke: mm Hold-down device: no Machine length: 2700 mm Hjdpey A Hkhjfx Airew Machine width: 1000 mm Machine height: 1400 mm Weight:

Condition: refurbished (used), Year of construction: 2006, power: 5 kW (6.80 HP), Container press for SALE (like new)! Manufacturer: Ludden and Mennekes Type: LM20L Year of manufacture: 2006 Capacity: 20 m³ Engine power: 5.5 kW Press plate: refurbished Metal curtains: refurbished Hydraulic cylinders: refurbished New screws, new fingers Inspection and repair work completed In very good condition Hjdpfs Afx Skox Airow Ready for operation We have 3 units available.

Condition: excellent (used), Year of construction: 1985, For sale: MÜLLER HEP 10.20.35 hydraulic press, manufactured in 1985. The press was in very good working condition until recently. It underwent an inspection in 2023. Hjdpez Saqqefx Airjw

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, operating hours: 300 h, machine/vehicle number: C15_202500022, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, pressing force: 44 t, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Hedpfx Aij Agvbuorow Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment!