Used Keyway for sale (100)

Condition: ready for operation (used), DROOP & REIN SZ 100 / Keyway Milling Machine - Maximum machining diameter: 140 mm - Spindle bore: 40 mm - Keyway length in a single pass: 100 mm - Distance between chuck and tailstock center: 350 mm - 3 working speeds - Electric chuck guard - Good overall condition, ready for operation Dimensions: L x W x H 0.9 x 0.6 x 1.5 meters / Weight: 300 kg Subject to errors and omissions. Nljdpfx Aiszv Edqs Nef

Condition: good (used), functionality: fully functional, Year of construction: 1992, Vertical snowplow with 10 snowplow blades and numerous mounting points. Nljdpfszv D Riex Ai Njf Drive system with a Stöber gearbox, providing infinitely variable speed control.

Condition: excellent (used), Type: U3E1000 Machine no.: 17098 Nlodpozvq Axofx Ai Nof Year of manufacture: 1982 Data: Engine power: 3 kW Pull length: 1000 mm Dimensions, W x D x H approx.: 900 x 700 x 1600 mm Weight (estimated): 300 kg ... 3 clearing needles

Condition: good (used), Year of construction: 2019, operating hours: 8,555 h, functionality: fully functional, machine/vehicle number: ML0406-000274, turning diameter over cross slide: 400 mm, turning length: 510 mm, turning diameter: 300 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 4,500 rpm, travel distance Y-axis: 105 mm, Equipment: documentation/manual, DOOSAN LYNX 2100 LSYB, manufactured in 2019. 12-station turret with driven tools and a hydraulic 3-jaw chuck. The machine is equipped with a bar magazine, enabling efficient series production. If you are looking for high-quality turning and milling capabilities, consider the DOOSAN LYNX 2100 LSYB turning-milling center, which we have for sale. Contact us for more details. • Key features: • Main spindle + counter spindle • Y-axis • B-axis • C-axis • 12-station turret (24 indexing positions) • Live tooling (driven tools) • Tool interface: BMT45 • Workpiece clamping/capacity (on the machine): • Hydraulic 3-jaw chuck: main and back • FMB bar loader → ideal for series production Additional equipment: • Bar loader: FMB Turbo5-65 • Collet system Hainbuch Axfix, main side 65 / back side 52 • Chip conveyor (belt, side discharge) • Oil scraper • Coolant cooler • High-pressure coolant system • Automatic tool measurement • Spindle and axis load monitoring system • 3-color signal light • Tool package: • 5x straight driven tool holders • 3x angled driven tool holders • 1x broaching tool for keyway broaching • Various turning tool holders, angle holders • Various turning tool holders, straight • Various Hainbuch collet chucks D65/D52 • Various collets for FMB Turbo Nedpfx Aiozwkwfe Nelf • Guide channel for FMB Ø65 and Ø25

Condition: excellent (used), Year of construction: 1991, Keyway broaching machine Elmass, suitable for keyways up to 14 mm wide. Maximum working stroke 200 mm. Thanks to the bore-guided tool, this Elmass system can also be used to broach extra-long keyways. Tools for standard bores with diameters of 6-50 mm and keyway widths of 2-14 mm are available. This tool system is also suitable for blind hole drilling. Nedpfx Aisld S S Se Nolf Thanks to the 400 mm rotary table, multiple keyways can also be broached.

Condition: good (used), Year of construction: 1971, machine/vehicle number: 170119003210A0, Offer 25217 Technical data: - Groove width: 3 to 36 mm - Max. groove length: 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 - 0.22 mm - Cutting speed: 2 - 10 m/min - Return speed: 20 m/min - Max. pulling force: 1.5 t - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as shown Njdpfxowu Suvj Ai Njlf

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 8101, Löwer Keyway Cutting and Slotting Machine Year of manufacture: 1992 40 mm spindle plus associated Leitz Fenstersatz IV68/56 40 mm bore Pick-up price – delivery possible upon request. Nlsdpfx Ajzvhguji Nof The sale is made excluding any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected.

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, feed length X-axis: 2,500 mm, feed length Z-axis: 3,200 mm, workpiece weight (max.): 25,000 kg, travel distance X-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 51,000 W, chuck outer diameter: 2,500 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 1,500 rpm, turning diameter: 3,000 mm, total height: 3,000 mm, type of input current: three-phase, turning height: 3,200 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 150 rpm, torque: 452 Nm, overall weight: 40,000 kg, year of last overhaul: 2022, Machine was overhauled in 2022 with new spindle servo motor and control unit The machine is under power and can be checked in our workshop Details are as below. Nedpfx Aszl H Ipoi Nolf Fagor 8055i-TC-4 Cnc Kontrol Ünitesi ii) 512 Mb Harddisk iii) Look Ahead (200 Blok Önden Okuma) iv) USB ve RS232 Haberleşme Protokolleri v) Türkçe Kullanım Paneli, vi) Türkçe Alarm Listesi vii) Parametrik Programlama Özelliği viii) 12 Dil Kullanım Seçeneği ix) Manual yada Otomatik Takım Kalibrasyon x) Vidalı Mil Telafisi (Ballscrew Compensation ) xi) Kontrol Üzerinde Ballbar Testi ve Osilascop Özelliği xii) 4 Eksen Motor & Sürücü Kontrol Kabiliyeti xiii) Uzatmalı standart El çarkı (3 M) xiv) 3 Eksen Fagor Servo Motor & Sürücüleri Spindle Servomotor, Power (S1/S6) 51/71 kW, Nom. Torque (S1) = 325 Nm, Max Torque 1 FM7-A510-C3B1-E01 (S6) = 452 Nm, 1500 / 5000 rpm Integrated C AXIS Encoder, Foot Mounting,, Keyway, Protection Degree IP44, ")

Condition: excellent (used), Year of construction: 1974, machine/vehicle number: AKK60945ASK8560, Manufacturer: Frömag Model: KZH 90 x 1500 Year of manufacture: 1974 Machine No.: AKK60945ASK8560 Weight: 1,35 t Technical data: Nedpelp Im Hjfx Ai Njlf max. tractive force: 7.000kg max. stroke: 1565 mm max. cutting speed: 2-6 m/min (infinitely variable) max. return speed: 2-6 m/min clamping area: 410 x 610 mm passage width: 0 open table groove width: 3 - 100 mm in bores from: Ø13 - 500 mm depth of machine base under floor: 2500mm footprint (l x w x h): approx. 800 x 1.100 x 1.100 mm power supply: 380V / 50Hz / 4,73kW Accessories: Dividing head-TA Twist groove drawing device for the production of twist grooves Serrations internal splines div. tools for the production of internal splines and grooves Remark: Optional: machine can also be used for profile broaching.

Year of construction: 2007, operating hours: 138 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 900K707385, Tablet Press PRESSIMA – as new, in ex-works condition Fully functional machine with complete documentation and software. Including multi-tip tooling set EU-D (5 × 4mm) (purchase price: €12,000, 6 months old) as well as a single-tip tooling set (5mm) EU-B. Both punch sets supplied by Ritter. The machine is equipped with an interchangeable turret. Both B- and D-type tooling can be used, in either EU or TSM standard. Operation • Suitable for small batch production • Main compression force measurement with digital readout on the machine panel • Digital display of parameters set via handwheels • Note: No automatic control system available Technical Data • Speed: 10–75 rpm • Max main compression force: 50 kN • Pre-compression force: 10 kN • Turret diameter: Ø 180 mm • Two-wheel feeder, variable speed • Drive motor: frequency controlled, 1.5 kW • Power supply: 400–480 V, 50/60 Hz • Total power consumption: 1.5 kW • Machine housing and press area: stainless steel • Press area unpainted, easy access, hard-nickel-plated surfaces Nledpsy Hl Aqofx Ai Nof • Central extraction port • Central manual lubrication pump for punches • Automatic lubrication pump for punches and guideways • Feeder motor integrated in the headpiece Mechanics • Handwheels for tablet thickness, main pressure, pre-compression, and fill • Rotary flap between fill tube and feeder • Solid pre-compression and main compression stations • Scrapers on upper and lower punches • Magnetic brakes on lower punches • 12 mm fill shoe as standard • Lower punch is lowered after dosing • Lower guideway and ejection rail easily removable • Machine status display on control panel Measuring and Analysis System • MS2300 for recording and analysis of up to 16 channels • Measurement/analysis of: o Main compression (upper) o Main compression (lower) o Pre-compression (upper) o Ejection force o Scraping force o Upper and lower punch displacement • Measuring amplifiers for main, pre-comp, ejection, and scraping force included Equipment / Features • Upper and lower punch shank bores with 4.8 mm keyways for guided tooling • Chamber-type feeder • Turret hard chrome plated • Main compression force measurement incl. indicator on operator terminal • Accessory kit type 8 MX: o 4 EU-B blank dies o 4 EU-D blank dies o 4 plugs for EU-B/EU-D or TSM-B/TSM-D Optional • Control retrofit with Siemens S7-1200 and Siemens TP panel possible.

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Nedpfoznn Hrex Ai Nslf Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1972, operating hours: 24 h, machine/vehicle number: 2025, overall weight: 5,200 kg, power: 10 kW (13.60 HP), input voltage: 380 V, input frequency: 50 Hz, broaching length: 320 mm, workpiece diameter (max.): 630 mm, total length: 2,650 mm, total width: 1,810 mm, total height: 2,890 mm, Slotting Machine STANKO 7M430 The STANKO model 7M430 is a heavy-duty vertical slotting machine, designed for machining internal keyways, slots, internal splines, and profiled surfaces in large and heavy workpieces. Manufactured in 1972, this machine is intended for industrial applications requiring robust construction, high rigidity, and reliable operation. The machine is equipped with a rotary worktable with a diameter of 630 mm, allowing flexible positioning of workpieces. The maximum stroke length of the ram is 320 mm (minimum stroke 120 mm), providing a wide working range for various slotting operations. The slotting head can be swivelled ±10°, enabling angular machining and increased versatility. Feeds along the X- and Y-axes are adjustable in the range of 0.2 to 2.4 mm per double stroke, while the rotary feed of the table can be set from 0.1 to 1.4°, ensuring precise control of cutting parameters. The maximum permissible table load is 3000 kg, making the machine suitable for large and heavy components. The distance from the table surface to the chisel guides is 500 mm, and the machine offers generous table travels: 650 mm longitudinal, 500 mm transverse, with 360° table rotation. The drive motor has a power rating of 10 kW, providing sufficient cutting force for demanding machining tasks. With overall dimensions of approximately 2650 × 1810 × 2890 mm and a total weight of about 5200 kg, the STANKO 7M430 features a rigid cast-iron construction that ensures excellent vibration damping and long-term stability. Condition: *Used machine *Ready for operation *Fully functional Njdpfx Aex U Tr Aji Njlf *Operating hours: approx. 24 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Slotting of internal keyways *Machining of internal splines *Profile machining of internal surfaces *Machining of large and heavy components *General mechanical engineering and repair work

Condition: used, Hydraulic workshop press, keyway milling press, groove milling press Hydraulic workshop press, custom-built, MaVo type 5t-20 Used for milling keyway grooves in through-holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Stand width: 770 mm Cylinder stroke: 220 mm Distance from threaded piston rod to table traverse: max. 900 mm Pressing speed, ram downwards: approx. 11.5 mm/sec. = 220 mm in 19 sec. Pressing speed, ram upwards: approx. 24.5 mm/sec. = 220 mm in 9 sec. Motor power: 5.5 kW Mains connection: 400 volts, 50 Hz - 2-hand control (one button for pump on, 1 button for downwards, 1 button for upwards) - Hydraulic pump HAWE, type K5/3 (can also deliver 400 bar, but the pump is very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length - 2 support plates - Very stable steel construction made of 140 series double T-beams - Estimated load-bearing capacity of the steel construction: 40 tons or more Nodpfx Aswki Apoi Nelf - Can be moved with a pallet truck Space requirement L x W x H: 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, Year of construction: 1997, overall weight: 1,700 kg, KEYWAY CUTTING MACHINE CABE ST 300 CNC SIEMENS KEYWAY WIDTH UP TO 18 mm Nsdpfx Aszkkt Hji Njlf STROKE: 460 mm Y-AXIS TABLE TRAVEL: 370 mm CONTROLLED AXES: TABLE ROTATION AND Y-AXIS INCREMENT SPEED: 20-25-35-45-50-70 MOTOR POWER: 2/3 HP FEED MECHANISMS WEIGHT: 1,700 KG CE MARKING + CE DECLARATION OF CONFORMITY AND GUARDING WITH MICRON YEAR OF MANUFACTURE: 1997 MACHINE IN EXCELLENT CONDITION

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,100 kg, total length: 1,359 mm, total width: 500 mm, total height: 650 mm, gear ratio: 160, torque: 32,000 Nm, shaft diameter: 160 mm, 1 piece, very little used industrial spur gear reducer for conveyor systems, cranes, and lifting drives. This gear reducer was installed on a freight train cable shunting system. However, this shunting system was never used. The gear reducer was stored dry in a winch house. A PDF data sheet is available here under the advertisement description! Manufacturer: Penig / ASUG GDR Type: TGL 34611 / 10A2-355x160 Rated power: P = 21.4 kW Torque: 32000 Nm Gear ratio: i = 160 Actual gear ratio: 152.230 Speed n1: 950 rpm Speed n2: 6.24 rpm Input shaft diameter: 35mm x 80mm Output shaft: Solid shaft Ø 160mm x 300mm Njdpjzimqrsfx Ai Nolf The second part of the pin coupling is also available. The bore in this half is 125 mm. !! The pin coupling is not included in the stated selling price !! Dimensions: Length: l4 = 1359 mm Width: b1 = 500 mm without shaft Height: h4 = 650 mm Shaft height: h1 = 315 mm Weight: 1100 kg The gear reducer series includes two-, three-, and four-stage gear reducers with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing of a particular design size are the same for two-, three-, and four-stage versions. In the four-stage version, the drive shaft is located below the parting plane. The housing is generally made of cast iron. The gear reducers can be operated in both directions of rotation.

Condition: used, Year of construction: 1966, Max. pulling force: 5 t, max. stroke: 850 mm, max. cutting speed: 12 m/min, max. return speed: 25 m/min, clamping area: 410 x 575 mm, groove width: 3 - 90 mm, drilling diameter: 13 - 500 mm, workpiece weight: 6000 kg, depth of the machine base below floor level: 1,400 mm. Nlodecm Elnepfx Ai Nef

Year of construction: 1989, condition: used, Manufacturer: Hönnema Nlsdelu D Hkjpfx Ai Nef Model: KAT 63/1250 Year of manufacture: 1989 General / technical data: CNC grooving machine with partial or rotary table for twist grooving. Max. stroke: 1250mm Cutting speed: stepless from 0 to 16m/min Max. Return speed: 16m/min Max. Groove width: 63mm Fully automatic twist dividing attachment: RA 450 AUDR Remark: The feed is made by stepping motor and ball screw through the machine table. The machine table has a stable and smooth-running linear guide. The machine is approx. 1.500mm under floor! The machine is under power in our warehouse and can be inspected.

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” EKS key interlock USB (ST01) 92750 Nlsdpfx Aezlt Eusi Nsf EUCHNER

Condition: good (used), Year of construction: 2007, Yeo Sheng Machinery TSH-TUVB-1010 Keyway Broaching Machine Capacity: 10 Ton Includes various tools The machine is in good working condition. Location: Hamont-Achel, Belgium Nsdpfx Aijx D Dihj Nelf The seller is not liable for typographical or transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 30 kg, input voltage: 400 V, rotor diameter: 600 mm, year of last overhaul: 2023, power: 1.1 kW (1.50 HP), Balancing machine upgraded in 2009. 1 Machine base, welded construction 1 Balancing unit Vertical, single plane, permanently calibrated, 1 special spindle with centric flange 1 piezo-electric vibration sensor 1 3-phase drive motor of 1.5 kW, driven by a belt 1 Protractor disk 300 mm diameter, with 360 °, mounted on the spindle 1 Safety guard For diameters up to 600 mm and heights of 420 mm 1 SCHENCK CAB 803 measuring device - With direct data entry system via touch screen - Industrial PC with active TFT color monitor - Visualization of results via vector meters - Network capability - Polish dialogue - Modular, easy-to-use system design Nedpjq Umcrefx Ai Njlf - Optimized signal processing system via digital Schenck MMD filter - Intelligent, self-diagnosing measurement electronics system - Operation using standard Windows routines - Programs for: - Straight compensation, keyway, compensation index - Tolerance calculation according to ISO 1940 - Log report in PDF format Balancing speeds from 0 to 720 RPM - Smooth Max residual unbalance 5 - 10 gmm (DIN 1319)

Condition: excellent (used), SECO Minimaster holder MM 12-20 150.4 (28657) Slot milling cutter in case with 4 inserts MM 12-12008 RO8 P 40 Nlsdpfxjw Iczxs Ai Njf

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 0 - 250 - 04 - 0558, Technical data : X working area 2,500 mm Working area Y 800 mm Z working area 40 mm Number of milling spindles 2 Vertical drilling spindles 16 Drilling spindles in X axis 2 Drilling spindles in Y axis 1 Vacuum pump Machine table traverse table Weight approx. 3,500 kg CNC drilling and milling center WEEKE BP 10 , built in 1991. Panel area 5,200 x 1,500 mm. Nodpfxorwmwfj Ai Njlf Machining area 2,500 x 800 mm, 16 vertical drilling stations, 1 keyway saw, 2 milling units, support plate handwheel and hydraulic unit. In 2016 he switched to Linux CNC 3D - new computer, new monitor, new software.

Condition: good (used), Year of construction: 1960, Straightening and keyway slotting machines, manufacturer CARL HURTH, type: P5V, year approx. 1960. Modernized in 2018 with two-hand control. Clamping length: 1250 mm with various support dies up to 50 mm diameter. 4 dial gauge holders. Ready for use. The machine can also be used for keyway slotting. Dimensions: width 1500 mm, depth 1300 mm, height 2400 mm, weight approx. 2000 kg. Nledpsy Rgk Refx Ai Njf

Condition: excellent (used), functionality: fully functional, Siemens AG Compact Asynchronous Motor, 1PH8166 1DF23 1FC1 Model: 1PH81661DF231FC1 Condition: Used Technical Data: SIMOTICS M General: 1500 RPM, 52 kW, 331 Nm, 116 A, 332 V 1750 RPM, 61 kW, 333 Nm, 116 A, 381 V Nodpfx Aiezh I I Ao Nslf 2000 RPM, 68 kW, 325 Nm, 116 A, 426 V 2200 RPM, 75 kW, 326 Nm, 116 A, 470 V Water cooling Protection class IP65 Incremental encoder, 22 bits, with commutation position (encoder IC22DQ) with Drive-CliQ interface Design: IM B35 (IM V15, IM V35) Shaft with keyway Full key balancing Bearing design: increased radial forces Vibration quality: R/A Shaft and flange accuracy: R Terminal box (top) Cable entry NDE Signal connection, left

Condition: refurbished (used), functionality: fully functional, Year of construction: 1968, machine/vehicle number: 51039/373, Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine Manufacturer: Rausch (Haan/Rhineland) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Nlsdpfx Aiov Rmvzs Njf Revision: December 2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Tensile force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: any Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments) Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz Features: - Geared motor drive with 2 working speeds - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with automatic door locking and safety interlock - New chip chute with tool storage option - Protective cover for the stroke adjustment - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length adjustment system (reproducible across all machines) - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations. The machine is marked with a CE certificate. General The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads. Broaching tools and broaching mandrels suitable for the machine are available on request.