Used Keyboard for sale (385)

Condition: good (used), Leco Type: Leco CS230 / Model: 619-000-300 Carbon / Sulfur Analyzer LECO CS230 Carbon/Sulfur Analyzer Carbon/Sulfur Determinator – Laboratory Instrument Description: For sale is a LECO CS230 Carbon/Sulfur Analyzer from the professional laboratory and industrial sector. This device is used for precise determination of carbon (C) and sulfur (S) in metallic and inorganic materials. Measurement is performed via high-temperature combustion with infrared detection, providing fast, reproducible, and highly accurate results. Typical areas of application include materials testing, metallurgy, quality control, research, foundries, universities, and industrial material analysis. Device includes PC, monitor, printer, software, manuals, and accessories as shown in the pictures. Features: - Analysis of Carbon (C) and Sulfur (S) - High-temperature combustion furnace - Infrared detection for precise measurement results - Fast analysis times - High reproducibility - Suitable for metals, steel, cast iron, minerals, ceramics, and more - Professional laboratory and industrial unit - CE compliant Technical specifications: Manufacturer: LECO Corporation (USA) Model: CS230 Model No.: 619-000-300 Available connections: - Oxygen (O₂) - Compressed air / Pneumatic - Vacuum connection - Data and printer interface Electrical data: - Mains voltage: 230 V AC - Frequency: 50 / 60 Hz - Power consumption: 14 A Kljdpfx Ajyh I N Esbcsp - Phase: single-phase Device dimensions: Height: approx. 78 cm, Width: approx. 70 cm, Depth: approx. 60 cm Weight: approx. 133 kg Important note: The tables shown in the photos are not included in the sale. Condition: used Scope of delivery: (see photo) - LECO CS230 analyzer - PC + monitor + keyboard + mouse - Printer - Software / manual CDs - Documentation / paperwork - Accessories as seen in the photos (Subject to change and error in technical data and specifications!) If you have further questions, we would be pleased to answer them by phone.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 9520190, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 30,000 rpm, overall weight: 3,300 kg, In July 2025, the drive module, hard disk module, PLC card, and the screen module with keyboard were replaced at a cost of €24,000. A replacement spindle can be purchased separately for €4,000. TECHNICAL DETAILS X-axis travel: 2,000 mm Y-axis travel: 1,000 mm Z-axis travel: 560 mm Spindle speed: 30,000 rpm MACHINE DETAILS Interface: USB WiN PCIN Control: Siemens Sinumerik 840 C Kledpfxeymmtvs Abcsp Weight: 3,300 kg Voltage: 380 V 50 Hz Rated current: 38 A EQUIPMENT Central lubrication system

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travels: 1,200 x 800 mm U and V axis travels: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.30 mm Simultaneously controlled axes: 4 (X, Y, U, V) Motors: AC on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg FILTRATION UNIT Tank capacity: 3,000 liters Conductivity control system: Automatic Resin capacity: 14 liters Temperature control: Automatic Kledoxwmacopfx Abcsp Dielectric cooling system: Chiller GENERATOR Power circuits: AC MOSFET Minimum surface roughness: Ra 0.35 µm Cutting speed: 360 mm²/min (brass wire Ø 0.30 mm) Automatic wire threading: Standard Power supply: 400V, three-phase CNC CONTROL Hardware: 64-bit industrial PC Memory: 1 GB Screen: 15” TFT touchscreen Data input: Keyboard, RS232, floppy disk, LAN, USB Positioning system: Closed-loop servo-controlled Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm MACHINE EQUIPPED WITH: Optical scales on X and Y axes 600 mm Z axis Wire spool holder for coils up to 50 kg No. 1 set of 0.25 mm guides No. 1 set of 0.30 mm guides Taper cutting system Automatic wire threading and re-threading after breakage Clamping system: frame with universal drilling pattern 64-bit CNC control with 16 GB memory AC power generator with anti-electrolysis device Automatic technology generation Serial interface, floppy drive, LAN, USB Dielectric unit with automatic demineralization system Chiller Year of manufacture: 2018

Condition: excellent (used), 5-Axis Machining Center with swivel milling head, pallet station, tool calibration, thermal compensation, work area extraction system, and much more. Year of manufacture: 2016 Spindle hours approx. 1,500 h (after spindle replacement at the beginning of 2025) Control System: - Heidenhain iTNC 530 HSCI - Heidenhain DCM Collision Monitoring - Heidenhain HR 410 electronic handwheel - Swiveling console with 19" monitor - Teleservice via LAN/WLAN Travel Range: - Travel X 1,000 mm, Y 1,100 mm, Z 810 mm - NC rotary table D 1,000 x 800 mm, swing diameter 1,350 mm Milling Head: - Automatic horizontal/vertical swivel milling head - Fully-fledged stepless NC axis from -1° to +90° - Blowing air through the spindle - External coolant supply via nozzle ring Drive power: 38 kW (100% duty cycle) Speed: 16,000 rpm Torque: 135 Nm at 40% duty cycle Spindle interface: HSK 63-A Media Supply: - Internal coolant feed: 50 bar - capacity 28 l/min - Paper belt filter with additional fine filter - Individual tool pressure regulation during program operation Tool Changer: - Rack magazine with 73 stations (expandable with additional racks) - Swiveling dialog operation panel - Drawer for loading and unloading tools from tool racks Tool Measurement: - 3D wireless touch probe m&h 20.00-Multi, software adapted for HSK 63-A - Including Kinematics-Opt, compatible with iTNC control, and calibration sphere on magnetic stand Pallet Changer: - Double palletizing unit, pallet diameter 1,000 x 800 mm, hole grid 100mm x 100mm, hardened drill bushes D 16mm - Rotary table unit including zero-point clamping system, loading station accessible by crane - Pallet changer unit protected with enclosure Special Equipment: - Micro-Epsilon sensor - For detection and dynamic compensation of thermal spindle growth Chip Conveyor: - Scraper belt conveyor along machine bed - Chip ejection height 1,100 mm Machine Enclosure: - Full-area protective enclosure with large angle door for crane loading and a quick-access door - Easy removal of swarf from the workspace Ksdpfsxhg Diox Abcelp Extraction System: - Oil and emulsion mist extraction, mechanical air filter, extraction capacity 1,800 m³/h Rotating View Window: - Viewing window integrated into the cabin door for workspace observation Camera in Work Area: - Monitor and keyboard at the operator console—allows monitoring of rear-side machining operations Machine Data: - Space requirement (without service area): approx. LxWxH 4,791 mm x 4,100 mm x 4,791 mm (including extraction system) - Machine weight approx. 19,700 kg - Total weight with all equipment plus maximum workpiece load, full tool magazine, and all operating materials: approx. 27,730 kg - Connected load: 50 kVA, 400V, 50/60 Hz This machining center, featuring an exceptionally good and practical configuration, is in very good condition. It operates with the renowned "Swiss precision." There is no service or repair backlog—in fact, the opposite. With an almost new milling spindle, the REIDEN RX 10 5X is well positioned for long-term use. Technical modifications and errors excepted.

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, Here, as a specialist dealer in injection moulding machines, we offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines currently in use. Year of manufacture: 2010. We have been wholesalers of used injection moulding machines for over 25 years. Current tax notice – Advantage for buying used machines: From 01/07/2025, used machines will also qualify for special tax depreciation of 30% per annum. In addition to the lower price compared to new machines, you can claim the same depreciation amounts as for a new machine. Keyword: growth booster (§ 7 paragraph 2 EStG-E). Currently in stock at our Hannover warehouse and tested. Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP thermoplastics Extras: 2 additional robots: Linear robots LRX 100 and LRX 50 can also be purchased separately - 2 x core pull (movable and fixed WAP) - Pneumatic valve 1 on fixed WAP - Accumulator for increased injection performance - Rapid SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Mould approach control - Cycle time analysis - External USB keyboard - Graphic analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on moving WAP for blowing out - 12 temperature control zones - Potential-free BDE contact - Process monitoring - Cycle storage - Trend graphic – target/actual diagram - PV control - Active back pressure control - Single-owner machine – sourced in Germany Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 2500 kN / 250 t Tie bar distance: 630 x 630 mm Platen size: 995 x 1050 mm Max. opening stroke: 820 mm Kodpfoxqhuujx Abcjlp Min. mould height: 330 mm Max. opening: 1150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection Unit Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g / PS Injection pressure: 2304 bar Robot LRX S50 - 3 gripper circuits – 4 vacuum circuits Robot LRX 100 - 1 gripper circuit – 4 vacuum circuits Electrical Equipment Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation and software manual Available immediately ex our Hannover warehouse or delivered to your location (delivery at cost). The machine is functionally tested and in our sole ownership. The requested machine is immediately available from our Hannover warehouse, functionally tested, and can be inspected under power. About our machines and company: – We only sell machines owned by us, purchased from ongoing production, from our Hannover warehouse – All machines are inspected and tested before disassembly – We do NOT sell insolvency stock – we are NOT brokers dealing with third-party property – All machines come from successful companies where maintenance and care are taken as a matter of course – All listed machines are available for viewing in our warehouse

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 35 h, functionality: fully functional, Waterjet cutting system 1020 EcoCube 2D Demonstration system, fully serviced, tested and ready for operation, Maximator JET certificate Availability: within one week High-pressure pump: optional after consultation and availability, e.g. SERVOTRON 40.45+, year of manufacture 2018, complete Maximator JET retrofit Year of manufacture of cutting table: 2022 Operating hours of cutting table: 35 h • Effective cutting area 1,000 x 2,000 mm • CNC control NUM FLEXIUM • Z-axis CNC clear height 100 mm with Quick-UP Kledpfx Aov Dfxzobcop • Automatic height sensing and collision protection • Laser for position determination • LED work area lighting • Cutting valve including abrasive cutting head • Ergonomic control panel • HP operator PC with 20 inch LED screen, splash-proof keyboard and Mouse • Water jet software SmartCut powered by IGEMS • Abrasive dosing unit CNC with intermediate container • Abrasive storage container 450 kg with mini hopper pressure conveying system • High pressure connection between pump and cutting head • Safety system with automatic lifting door • Stop edge in X and Y • Guarantee 1 year or 2,000 operating hours Price ex works plus VAT €125,000 Additional services  2D training, system operation for up to 4 people on site at the customer's premises, 2 days €2,400  Installation and assembly up to 400 km one way, 2 days €2,400  Transport according to current daily price approx. €1,600 Subject to changes and errors in the technical data and prices. Subject to prior sale. Payment conditions  100% after delivery, commissioning and acceptance on site

Condition: used, Year of construction: 2012, pressing force: 4 t, HSM V-Press 504 waste paper baler - used The HSM V-Press 504 vertical baler is a compact yet extremely efficient device designed for pressing cardboard and plastic waste. Thanks to its robust construction, simple operation, and modern control system, this model is the ideal solution for manufacturing companies, warehouses, stores, and logistics centers where significant amounts of packaging waste are generated every day. The baler, manufactured by the German brand HSM, ensures reliable operation and a long service life. Kledpfx Aboyim Ayocjp Key advantages of the waste paper baler: 40 kN crushing force – effective waste compression, reducing volume by up to 95%. Efficiency and ergonomics – the crushing process starts automatically when the door is closed, and the piston returns to its starting position automatically. Modern control system – a microprocessor with a membrane keyboard and graphic text display ensures easy monitoring of the work process. Double door with lever – safe and convenient operation even with intensive use. Compact bales up to 60 kg – facilitate transport and storage of processed waste. Integrated bale ejector – increases operator safety and comfort. Energy-efficient operation – 1.1 kW motor allows for full functionality with low energy consumption. Stable, durable construction – guarantees reliability over a long service life. The offer applies to the HSM V-Press 504 waste paper baler: • Product code: MTP006524 • Product condition: used • Year of manufacture: 2012 • Model: V-Press 504 • Width: 102 cm • Depth: 81.5 cm • Height: 193 cm • Weight: 290 kg • Power: 1100 W • Voltage: 230 V Net price: €2,859.00 per unit * I have large quantities available, with the possibility of negotiating the price for larger orders. * Transport possible throughout Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: new, power: 265 kW (360.30 HP), fuel type: diesel, number of seats: 49, gearing type: automatic, emission class: euro3, Year of construction: 2026, The Mercedes-Benz bus with Marcopolo Viaggio 1050 G8 bodywork is a reliable solution for comfortable passenger transport. This combination of a robust chassis and innovative body design is ideal for long-distance travel, regional transit services, and luxurious tourist shuttle operations. With advanced safety features and efficient engineering, this bus ensures low operating costs. Worldwide, this is the most-produced bus combination – thanks to its unparalleled comfort and durability. Technical Specifications Mercedes-Benz Bus Chassis: Engine: 12.8-liter, 6-cylinder diesel engine, 450 hp (330 kW), 2200 Nm torque, Euro III compliant for reliable performance. - Transmission: Automated ZF Traxon 12-speed gearbox with integrated intarder for smooth and secure deceleration. - Driving Assistance Systems: Hill Hold function for effortless starts in stop-and-go traffic, Power Mode for overtaking, Eco-Roll feature for fuel savings. - Brakes: Disc brakes on front and rear axles, with ASR, EBS, ESP, and emergency brake light (ESS) for maximum safety. - Fuel Tank: Large capacity for extended driving ranges with efficient consumption. - Wheels: High-gloss polished aluminum wheels for durability and a premium appearance. - Fleet Management: FMS interface for integration with external management systems. - Safety: Engine compartment fire detection system for added protection. Marcopolo Viaggio 1050 G8 Bodywork: Kedpfoyn N Thjx Abcjlp - Exterior: Distinctive DCPD front design, optional LED headlights for optimal visibility. - Interior: Modern cabin layout featuring premium sound system, Wi-Fi, camera systems, and monitors (available on request). - Driver’s Workspace: Ergonomic dashboard with additional storage, multiplex control system, help button, and quick access keyboard. - Entrance: Wide steps with LED lighting and antibacterial handrails for safe boarding and exiting. - Seats: G8 seats with USB ports, adjustable backrests, and maintenance-friendly construction. Advantages: - Operational Flexibility: Customizable configurations for a wide range of applications. - Durability: Robust construction and low-maintenance design extend service life. - Comfort & Innovation: Premium interior and modern technology for both passengers and drivers. - Efficiency: Low fuel consumption and maintenance-friendly access reduce operational costs. Fields of Application: - Regional Transit: Reliable and comfortable for daily passenger transport. - Long-Distance Travel: Ideal for multi-day journeys with an emphasis on comfort and amenities. - VIP and Shuttle Transfers: Perfect for exclusive trips for business travelers and event guests. - Sports Teams: Spacious layout for teams and equipment. = Further Information = Transmission: ZF Traxon, 12-speed, automatic Year of manufacture: 2026 Number of cylinders: 6 Engine displacement: 12,800 cc

Year of construction: 2018, condition: used, 4-axis CNC measuring machine, additional CNC axis and laser sensor for measuring the outer contour and for generating 3D point clouds. Contactless full measurement of precision tools, microtools, grinding wheels, rotationally symmetric parts and flat parts. Microtools with diameter from 0.1 mm can be measured with high precision. Certified accuracy E1 = (1.8 + L/300) μm and repeatability ≤ 1.5 μm. Accessories: Full enclosure, ISO 50 adapter spindle, Automatically actuated hydrodew-spannfutter, Machine software: 3D tool analysis, 3D matcher, Helitronic Toolstudio, Viascan, DXF generator, Viafit, Control panel with stand, 22" touchscreen, keyboard and mouse. Traverse X-axis: 270 mm Kodpeygl Avjfx Abcolp X axis travel: 270 mm Z-axis travel: 325 mm Y axis travel: 455 mm Y-axis travel: 455 mm A-axis: 360° Length measuring accuracy E1 value E1: (1.8 + L/300) μm A axis: 360 ° Measurement resolution: 0.25 µm Length measurement accuracy E1 value E1: (1.8 + L/300) µm Position resolution for all linear axes Y, Z: 0,02 µm reading resolution: 0.25µm max. workpiece length: 420 mm mass: 1200 kg max. workpiece weight: 25 kg Magnification transmitted light camera: 1:50 gear Connected load approx.: approx. 1.5 kVA (230 V / 50 Hz) Dimensions W x D x H approx.: 1117 x 1390 x 2012 mm Weight: approx. 1200 kg colour: gray RAL 9003, gray RAL 7011

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: F20iMW1 Faserlaser, workpiece weight (max.): 50 kg, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, overall weight: 250 kg, warranty duration: 6 months, height adjustment type: electric, scan area width: 175 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,064 nm, Equipment: cabin, Used fiber laser system for professional engraving, marking, and labeling of metals and plastics. Industrial quality, laser class 1, CE-compliant, Made in Germany. Technical Data - Laser source: IPG Ytterbium fiber laser (MOPA) - Power: 20 W - Wavelength: 1064 nm - Pulse frequency: 20–200 kHz - Beam quality: M² < 1.6 - Power supply: 230 V / 50 Hz Scanner & Optics - X-Y galvo scanner for 1064 nm - F-Theta lens f = 254 mm - Marking field: approx. 175 × 175 mm - Pilot laser (red) + 2 focus distance lasers for focus setting Machine & Work Area - Enclosed laser class 1 workstation - Combined sit/stand workstation - Motorized Z-axis (400 mm total travel) - Stainless steel worktable with 25-mm perforated grid - Extraction port DN50 (extraction unit not included) Control & Software - Industrial PC - SK CONTROL marking software (texts, logos, QR codes, variable data) - Ethernet, USB, RS232, Start/Stop for extraction - 23" monitor, keyboard & mouse Kledpoyctfdefx Abcjp Scope of Delivery & Safety - Complete machine with aluminum housing - Emergency stop, main switch, status indicators - Circuit diagrams & operating manual - CE, TÜV-tested - Laser class 1

Condition: used, Year of construction: 2019, Machine design: Through-feed/return-feed Working size in X direction: 1300 mm Working size in Y direction: 5600 mm Working thickness (Z dimension): 60 mm Number of main spindles: 1 unit Main spindle power: 5.5 kW Main spindle speed: 1,000–20,000 rpm Clamping system: HSK-63 F Tool changer: Pick-up changer Tool change positions: 3 units Rear wall groove unit: fixed in Y direction Vertical drilling spindles (X direction): 3 units Vertical drilling spindles (Y direction): 10 units Horizontal drilling spindles (X direction): 2 units Horizontal drilling spindles (Y direction): 6 units Control type: PC control Klsdpfxsymp N To Abcop Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Gannomat Editor DXF interface: Yes Office version available: Yes Online connectivity possible: Yes Table version: fixed, smooth table Central lubrication: automatic Tools: various tools Operating hours: 920 hours Approx. weight: 1,800 kg Extraction diameter: 3x80 mm The machine has been modernized at the factory; pressure beam and control technology from model 0572! Stock location: Customer

Condition: good (used), La San Marco NEW 105 MULTIBOILER 2G coffee maker New price 8.800 ,- € The NEW 105 Multiboiler series uses the latest technology from La San Marco. The Multiboiler technology allows precise temperature control for each boiler of each group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature setting that can be easily adjusted via the touchscreen keypad. The innovative keypad with touch screen technology is complemented by a graphic RGB display. Set-up and programme guidance is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. Workstation lighting with customisable multicolour LEDs makes the machine even more ergonomic with an eye to aesthetics. Groups: 2 Power: 5.3 kW Steam lance: 2 Boiler: 10 L + 2 x 0,45 L Operation: Touch Display Multiboiler: Yes Power 230V: Yes Hot water: Programmable Power 380V: No Size LxDxH : 790 x 535 x 515 mm Shape: Traditional Barista Lights: Yes Item condition: defective, for spare parts or for hobbyists You can find more SM NEW 105 models - new and used - in our shop! Kedpfskyt Nrex Abcelp International shipping costs on request!

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 550 mm, workpiece length (max.): 750 mm, GF CUT 2000X Year of manufacture: 2016 Travel distances: X= 350 mm, Y= 250 mm, Z= 256 mm U/V-axis travels: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Kodpfx Absydk Skjcjlp Available wire diameters: 0.05 – 0.30 mm including Option KIT 50 Including automatic wire changer AWC Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand-held box for convenient setup Including AGIESETUP 3D Including glass scales for X and Y axes VISION 5 control unit 15" LCD color screen, membrane keyboard and mouse Including Threading Expert Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. An individual test cut is possible upon request. We also offer on-site commissioning and training for this machine.

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Kedpfxefp A I Ej Abcslp Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: new, Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine with 3 chucks FLV-TH-6022 3kW Specifications - Positioning accuracy of the X and Y axes: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Nominal power: 3.0kW - Source brand: MAX Photonics - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Klodpoyh Unnsfx Abcop Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: VT2155, SPINNER VC1150 Travel paths: X 1150 mm, Y 620 mm, Z 600 mm "Advanced" version Extra-heavy cross-slide construction for high-performance machining with patented guideway cover concept Ensuring optimal chip flow and a small machine footprint High-precision MILLING SPINDLE up to 14,000 rpm as built-in motor spindle, with direct drive (no belt), water cooling, M=117 Nm (S6 25%) P=22 kW (S6 25%) / SK40 TOOL MAGAZINE with 32 tool stations DIRECT MEASURING SYSTEMS on X/Y/Z axes CONTROL SYSTEM: FANUC 32iMB with the following basic functions: - Path control with Fanuc standard user interface - 15" LCD color monitor, Fanuc panel, full keyboard - User memory 1 MB, max. 1000 program numbers - USB interface - Ethernet interface - GE Fanuc cycle packages "Milling" for threading, deep drilling - 48 zero point offsets - 200 tool compensation pairs, tool life monitoring - Thread cutting without compensating chuck - Functions: helical interpolation + cylindrical interpolation - Functions: scaling, mirroring, coordinate system rotation - Parallel programming in background - Run time and piece counter - Inch-metric changeover - Electronic handwheel - Control language dialogue in German/English/French Rapid traverse in all linear axes: 48 m/min CONVERSATIONAL PROGRAMMING Fanuc Manual Guide i UNIVERSAL CHIP CONVEYOR VC1150 Preparation of spindle for HIGH PRESSURE; operation with auxiliary tank up to 70/80 bar HIGH PRESSURE TANK 70 bar, with paper band filter Provision for SPINNER STANDARD PROBE Wireless SPINDLE PROBE Spinner-Blum STANDARD DOCUMENTATION IN GERMAN Kjdjykz Ddspfx Abcslp Operating voltage: 3x400 V +/-10% Line frequency: 50 Hz (+/-2%) TN system (5-wire) PACKAGING Notes: The price includes warranty services only within Germany. For new and demonstration machines, the images displayed are not necessarily of the individual machine but may be from comparable models. Accessories such as clamping devices or tool holders are only included if listed in the technical description. Please request a detailed ex-works quotation. Visit our factory near Munich or one of our showrooms. We may have other comparable machine offers available. Prior sale expressly reserved.

Condition: new, Year of construction: 2025, Description: AORE PG3015 T6: (3 Kw) We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 3 overall dimensions 8635 x 3920 x 2350 mm weight of the machine ca. 6.400 kg Furnishing: - Max-photonics Laser source 3 Kw (1~20 Kw as option) - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 3 Kw ) - normal steel 20 mm - stainless steel 10 mm - aluminium 10 mm - brass 6 mm - copper 5 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 2100 mm - Y-axis travel 3000 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G tube Double pneumatic Chuck 10 ~ 225 mm cutting 10 till 225 mm sqaer and rond tube lenght 6 meter special software for tube cutting max loade 300 kg Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1000 kg. - 2 x CCTV camera 1 on pallet arear and 1 on cutting inside assisting gasess: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table Why, CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - they know from beginning what to respect service, installation and training. - for this machine the installation and training is 2 week. Not included. Cit9d2x8ou - we can offer installation cost, depend on end-user place and country. - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality Klodpfx Abjix Nb Njcsp - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Official Dealer CNC Top Ten b.v. Denekamp Holland

Condition: new, Year of construction: 2025, machine/vehicle number: OR-220701306, Description: AORE PH3015: ( 6 Kw) New from stock We can deliver this type Laser cap. from (1 till max 20 Kw) A Compact Design with Complete Protection (CE) table length 3050 mm table width 1530 mm laser head ( SWISS RAYTOOLS ) autofocus laser capacity Kw 6 overall dimensions 8265 x 2280 x 2150 mm weight of the machine ca. 6.400 kg Furnishing: - Max-photonics Laser source 6 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 6 Kw ) - normal steel 25 mm - stainless steel 20 mm - aluminium 16 mm - brass 10 mm - copper 7 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 315 mm - Axis speed X / Y: 100 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (15 second max for changing) - automatic change, max load on tables 1000 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) Klodpfxoix Nn Ue Abcsp - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 3 part trolly under work table Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - they know from beginning what to respect service, installation and training. - for this machine the installation and training is 1,5 week. Not included. - we can offer cost also depend on end-user place and country. - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 100 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 50 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: good (used), Keyboard, control panel, industrial, PLC workstation, programming device Kljdpfx Ajhyx Rkobcep -Manufacturer: Siemens, programming device Simatic PG 605 with case -Type: Simatic PG 605U 6ES5 605-0UA12 -Dimensions case: 390/300/H90 mm -Total weight: 1.7 kg

Condition: new, Spiral dough mixer 120 kg dough Diosna Power in flour: 75 kg Bowl contents: 180 liter Digital control keyboard with program memory Kjdpox N Edyjfx Abcelp Cover with safety switch Castors with brakes Voltage: 400V / 50Hz / 3 N/PE Electric power: 6.5kW

Year of construction: 2024, condition: like new (used), Compact Instrument for Automated Nucleic Acid Purification The Perkin Elmer Chemagic 360 is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a wide variety of sample materials. It utilizes Chemagen's magnetic bead technology to obtain high-purity nucleic acids for various downstream applications. With dimensions of only 80 x 80 cm and its unique sample volume flexibility, the Chemagic 360 is an innovative instrument that can be adapted to almost all your nucleic acid purification needs. Utilizing proven M-PVA magnetic bead technology, the Chemagic 360 delivers high yields of high-purity nucleic acids suitable for a wide range of downstream applications such as NGS, MLPA, genotyping, and PCR. ``` Features at a Glance Kledpeyk Uy Sjfx Abcsp • Optimized design to prevent cross-contamination • Sample volume from 10 µl to 10 ml • Throughput of 96 to 4000 samples per day • Compact design • Ultra-fast DNA purification protocols available • Flexible reagent dispensing to keep operating costs low • User-friendly interface enables quick and easy installation • Easy integration into liquid handling platforms Benefits at a Glance • DNA isolation directly from human whole blood or plasma samples: No primary sample pretreatment is required • Ready-to-use DNA with high yield and purity • Fast processing times: 96 samples in less than 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS • High recovery rates • Autonomous system with respect to downstream assays Specifications: Manufacturer: Perkin Elmer Type: Chemagic 360 Throughput: approximately 96 samples per run Sample capacity: 12, 24, and 96 Volume: 10 microns to 10 ml Extraction heads (chemagic rod heads): 96 Number of samples: 1–96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio – whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary, compact table design LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Size/Dimensions: 800 x 800 x 900 mm Weight: 140 kg Year of manufacture: 2024 Video link: Chemagic 360 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2007, condition: good (used), Chemagen chemagic Magnetic Separation Module I The chemagic Magnetic Separation Module I (chemagic MSM I) automatically isolates nucleic acids within one hour. Viral RNA from 96 nasal swabs can be isolated simultaneously. The Chemagen MSM-1 is an automated system for high-throughput nucleic acid (DNA/RNA) isolation. Klsdpfxjyk Uu Nj Abcsp It utilizes patented Magnetic Bead Technology, in which magnetizable metal rods are immersed in the process solutions to efficiently collect and resuspend the bound particles. Technical Features & Capacity Throughput: The system has a modular design and can process 12, 24, or 96 samples simultaneously, depending on the rod head used. Sample Volume: It offers high flexibility for volumes from 10 µl to 10 ml. Processing Time: 96 samples (small volumes): approx. 15–60 min. 24 samples (medium volumes): approx. 35–60 min. 12 samples (large volumes): approx. 45–60 min. Technology: Particle resuspension is achieved by rotating the metal rods at up to 2,000 rpm, enabling high yield and purity without cross-contamination. System Components & Extensions Automation: The MSM-1 can be integrated into standard liquid handling units and often features a 6-axis industrial robot for fully automated sample tracking. Software: The system is controlled by chemagic QA software, which is LIMS-compatible. Applications The device is primarily used in research and diagnostics, including: Biobanking and human genetics HLA typing Detection of viruses and bacteria Extraction from various materials such as whole blood, saliva, serum, or plasma System Components Actuators: High-precision linear axes for vertical movement and a rotary axis for mixing Electromagnet: Central unit for controlling the magnetic attraction to the metal rods Interfaces: Integrated PC with screen, keyboard, and barcode scanner for sample tracking Software: chemagic QA software (LIMS-compatible, logging, user management) Special Features Cross-contamination protection: The use of disposable protective sleeves (tip combs) for the metal rods prevents contact between samples. Automation: Can be combined with the chemagic dispenser for automated buffer filling or integrated into liquid handling robots (e.g., Hamilton, Tecan). Probe heads: 96 Sample volume: 10 - 400 μL Number of samples: 1 to 96 samples TFT monitor, keyboard, and mouse Year of manufacture: 2007 Dimensions & Setup Basic machine (W/D/H): approx. 600 x 640 x 950 mm. Carrier axis (W/D/H): 1940 x 170 x 200 mm (with full expansion and rail system). Total space requirement: A fully configured system can require up to 2000 x 740 x 800 mm (L/W/H). Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2024, condition: like new (used), PerkinElmer Chemagic 360-D Nucleic Acid Extraction System The PerkinElmer Chemagic 360-D is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a variety of sample materials. It utilizes Chemagen's magnetic bead technology to obtain high-purity nucleic acids for various downstream applications. Key Features and Specifications Technology: The system is based on the patented Chemagen M-PVA magnetic bead technology. Metal rods are magnetized to collect the beads containing the bound nucleic acids and transfer them between different process solutions, minimizing cross-contamination. Sample Volume Flexibility: It offers various rod heads (magnetic rod heads) for different volume ranges and throughputs: 12-Rod Head: For sample volumes from 1 ml to 10 ml. 24-Rod Head: For sample volumes from 200 µl to 4 ml. 96-Rod Head: For sample volumes from 10 µl to 400 µl. Applications: The isolated nucleic acids are suitable for a wide range of applications, including next-generation sequencing (NGS), genotyping, PCR, and MLPA. Software: The intuitive Chemagic software enables easy protocol setup, process status tracking (runtime, remaining time), and the generation of LIMS-compatible protocol files for quality assurance. Accessories: An optional Chemagic Dispenser 360 is available for quick and accurate reagent pre-filling, thus reducing manual labor. Dimensions: The device measures 800 x 800 x 900 mm (L/W/H). Certification: The 360-D version is a CE-IVD registered and FDA-listed instrument intended for in vitro diagnostic use (in combination with the appropriate kits). ``` The advantages at a glance • DNA isolation directly from human whole blood or plasma samples: No pretreatment of primary samples is required before extraction • Ready-to-use DNA with high yield and purity Klodpfx Abjyk Upmjcep • Fast processing times: 96 samples in less than 60 minutes • Long DNA fragments: up to 200 kb, suitable for NGS • High recovery rates • Autonomous system with respect to downstream assays Specifications: Manufacturer: Perkin Elmer Type: Chemagic 360-D Throughput: approximately 96 samples per run Sample capacity: 12, 24, and 96 Volume: 10 microns to 10 ml Extraction heads (Chemagic rod heads): 96 Number of samples: 1–96 Sample volumes: 10 µl to 400 µl Tube plates: 96-well plates Extensive kit portfolio – whole blood, saliva, serum/plasma, etc. No cross-contamination Revolutionary compact table design Computer workstation with Chemagic software LCD monitor, keyboard, mouse Power supply: 100–240 V~ (AC), 50/60 Hz Size/Dimensions: Width: 900 mm (1500 mm with display attached and door open) Depth: 820 mm (1000 mm with door open) Height: 900 mm Weight: 140 kg Year of manufacture: 2024 Video link: Chemagic 360-D Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Working width 630 mm Working height 3-310 mm Motor output 7,5 kW Number of knives 4-TERSA St. Feed speed 6-20 m/min. Vertikal stroke elektrisch FIMAL thickness planer type SP 63 A Demonstration Maschine ----- NEW MACHINE "Partnership Edition" Technical data / basic equipment: ----- - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal spindles - chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Suction nozzle 150 mm - Electrics and protections in accordance with CE standards - Planing width: 630 mm - Motor: 50 Hz., 5.5 kW / 7.5 HP Ksdpfeu Uu U Usx Abcolp with manual star-delta switch - Infinitely adjustable feed speed from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with electronic display) - Sound level according to EN 27960: 86 – 90 dB(A) Stock machine additionally equipped with the following options: ----- ----- - Motor with 7.5 kW / 10 hp - Thicknessing table extension, 600 mm - 2x rubberized pull-out roller - TERSA system knife shaft, including reversible knives ----- Promotional price from stock: on request! ----- All prices ex warehouse plus VAT/plus. Freight and assembly at cost (Technical information according to the manufacturer - without guarantee!)

Condition: used, -Controlled fermentation chamber: -Dimensions: 1150x3750x2225 mm -External chamber width: 1,150 mm -External chamber depth: 3,750 mm -Type of fermentation chamber: BFC -Trolley dimensions: 600 x 800 (overall 670x825) -Number of trolleys: 4 -Usable chamber depth: 3,600 mm -Usable cell width: 1,000 mm -Door frame type: Single door 1,000 mm -Evaporator side: Left -Control panel: OPTICOM -Electrical connection BFC: P6: 400-440V / 3PH + N + PE / 50-60Hz -Tunnel-type chamber: No -Year of manufacture: 12/2014 -Refurbished equipment: Equipment is prepared upon order. Lead and return times are agreed at that moment (please request the price after refurbishment). -Automatic fermentation cycle management -Temperature management -Manual and automatic mode -30 programmable cycles Kodpfx Abeyman Tocjlp -Automatic end-of-cycle date management -Fault management -Smooth keyboard, scratch-resistant finish.