Used Broaching for sale (207)

Condition: used, BROACHING MACHINE Tsdpfx Acet Hr Dfe Nsf

Condition: used, functionality: fully functional, Year of construction: 2000, Internal broaching machine Tedpfotpmnrex Ac Njf Make: Arthur Klink Type: RISH 10x1000x400 Year of construction: 2000

Condition: used, Year of construction: 2000, machine/vehicle number: 6126, Comau CNC Crankshaft Turn Broaching Machine Tedpfx Acexxx E He Nsf max crankshaft dimensions, ca.: dia 250 x 800 mm, Twin-Station Crankshaft Turn Broaching Machine for Main and Pin Bearings, internal part transfer, two twin-cutting-head stations, one CNC SIEMENS SINUMERIK 840D per station with X1/X2 and Z1/Z2 Axes and C1/C2/C3/C4 rotating spindle Axes for each station, LxWxH, ca. 8x3x3m, weight, ca. 30to

Condition: good (used), Year of construction: 1980, Info: Machine was embedded in a pit! - Tractive force: max. 25,000 kg Tsdpfx Aoxr Aw Tec Nsf - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total connection requirement: 45 kW - Machine weight: 5,500 kg

Condition: excellent (used), functionality: fully functional, German slotting machine Klopp model SK 260, with table featuring integrated divider and automatic feed on the table's main axis. Strokes per minute: 30-55-80, adjustable distance from table to ram, maximum distance between tool and column body: 430 mm, table surface: 300x450 mm, rotary table divider diameter: 350 mm, table longitudinal travel: 420 mm, cross travel: 320 mm, tiltable head, motor power: 2.5 hp, estimated weight: 1400 kg, with coolant pump, machine equipped with tools, in very good condition. Tsdpexz Rxwofx Ac Nef

Condition: ready for operation (used), Year of construction: 2012, A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Tsdpfjxwcvmex Ac Nof

Condition: good (used), BEHR ST 150 / Vertical Slotting Machine with Swiveling Head Tsdpfx Aoxwm Ugec Nef - Stroke: 150 - 175 mm - Head tilt adjustable 5-8 degrees in both directions - Table height / Distance table to lower edge of ram guide: 260 mm - Rotary table diameter: 340 mm - Table longitudinal travel: 320 mm - 3 stroke speeds: 17-54-108 strokes per minute - Maximum slot width: 16-26 mm - Feed in X + Y axes / speed adjustable - Rotary table adjustment manual - 3-jaw chuck Dimensions: LxWxH 1.5 x 1 x 2 meters / Weight: 1600 kg Subject to errors and omissions

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 20, Used CNC internal broaching machine Make: FORST Tjdpfxov Htlue Ac Nef Type: RISH 63X1000X320 Year of manufacture: 1999/ Reconditioned Mach. No.: 20

Condition: used, Year of construction: 2008, groove width 70 mm drawing length 400 mm Tsdpfxsxpiy Ne Ac Nsf working speed 0-20 m/min control Siemens drawing capacity 21.000 N workpiece weight 20 t main drive motor 7,5 kW cutting speed 0-20 m/min return speed 40 m/min boring diameter 10-330 mm total power requirement 7,5 kW dimensions of the machine ca. 1,2x2,3x1,65 m Toolset WC 7 see pictures

Condition: good (used), Year of construction: 2004, - Tractive force: max. 160 kN - Clearing stroke: max. 1000 mm - Truck feed stroke: max. 630 mm - Table top width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW Tsdpfx Acjxr Aw Hs Njf - Machine weight: 12,410 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2026 - 60 kN - New Machine - BROACHING MACHINES MADE IN GERMANY ==> New machines ordered this year currently available on special terms! ==> A fully refurbished used machine will soon be available as well. Please inquire separately. ==> ==> Information for manufacturing companies and dealers with in-house production: Drawings, rights, spare parts, customer and prospective buyer data, as well as planning and production documentation for the broaching machine (including plans for a 9-ton pulling force variant) can be acquired from us, if desired. Please contact us if interested. ==> Our new machines are custom-built to order. Short-term manufacturing and delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine designed for long-term use. Broaching tools (including special broaches for internal splines, etc.) and accessories available on request. Please inquire separately. All broaching tools and tool holders from other manufacturers may be used on our broaching machine! Complete manufacturing and assembly at our factory in Germany. Short-term delivery available by arrangement. Additionally, we offer spare and wear parts (spindles, spindle nuts, motors, gears, as well as all other required components including electrical parts) for both Wolff and VADARI SRM broaching machines. Vertical Broaching Machine Type SRM 2026 - NEW MACHINE: The primary application is the production of keyways from 3-28 mm and profiles of similar dimensions. Due to its compact and space-saving design, the machine is suitable for successful use in small, medium, and large workshops. The low purchase price justifies investment even for small batch series and custom production. Drive is via a pole-changeable geared brake motor. The maintenance-free dual-spindle drive ensures smooth operation and a central pulling point with constant cutting force. The open tool table allows even large workpieces to be accommodated without restriction. In most cases, workpieces do not need to be clamped securely. Stroke adjustment is by adjustable end switches with stroke limitation. For short hubs/workpieces, several parts can be stacked. Broaching needles, mandrels, and spare parts available at attractive conditions upon request. Technical Data: Pulling force: 60 kN at 3m/min, 40 kN at 6m/min. Broaching speed: 3m/min & 6m/min (Optional: stepless speed control from 0 m/min to 6m/min available with advanced electronics) Return speed: 6m/min Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: unlimited Worktable: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Floor space: 750 x 570 mm Total machine height: 1510 mm Motor power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Finish: Exterior RAL 7035/7036/7016, interior RAL 3000 or custom Safety door: Standard equipment Coolant system: Standard equipment Tsdpfx Acjuqbnhs Nsf The machine complies with the current Machinery Directive and carries CE certification.

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 11,000 kg, total length: 80,510 mm, total width: 42,180 mm, total height: 2,500 mm, LASER fr metal sheet and tube cutting Tsdpfxsxlk U Hs Ac Nof

Condition: ready for operation (used), Year of construction: 1998, overall weight: 2,900 kg, power: 8 kW (10.88 HP), input voltage: 380 V, number of broaching positions: 1, total width: 6,100 mm, total height: 1,900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 Tjdpfxoxtcz Is Ac Nef General Information / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Tensile force: 10,000 kg Diameter of drawhead mount in the draw bridge: 85 mm Broaching tool clamping: universal drawhead for flat shanks up to 25 mm width Through-hole in the clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine body of the tool feeder) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special Features: • The machine is equipped with manual-hydraulic control for the broaching stroke movement • The machine has an integrated coolant/lubricant system • The machine features a basic oil drip tray fitted to the machine bed, without tool feeder Remarks: The machine is ideal for the production of keyways and profiles. Broaching needles, arbors, and drawheads can be supplied on request.

Condition: ready for operation (used), Year of construction: 2008, A vertical internal broaching machine Frömag is available. Broaching tools: 3, stroke: 800mm, pulling force: 60kN, connected load: 15kW. Machine dimensions X/Y/Z: approx. 1050mm/900mm/3800mm, control: Frömag Commander PP-10. An on-site inspection is possible. Tedpfxjxph Sde Ac Nef

Condition: used, Year of construction: 1959, pulling force - max. 10 t max. ram stroke 1300 mm voltage 380 V Tjdpfx Acsvh Nd Aj Njf weight 1400 kg Broaching machine RAUSCH RS10/1300 Year of construction: 1959 Stroke: 1,800 mm Tractive force: 10 tonnes

Condition: repair required (used), functionality: limited functionality, Year of construction: 1981, broaching length: 400 mm, For sale is a Leistritz Polymat keyseating machine. This is an upgraded Stuhlmann machine. Tsdpfxjxmg Acj Ac Njf The machine is functional but occasionally has an intermittent electrical contact. Available accessories: guide bar for cutters WC2 / WC3 / WC4, various feed bars, and 2 tool holders WC7 – see images.

Condition: good (used), pulling force - max. 6 t Tsdpfew Saihjx Ac Nsf max. ram stroke 800 mm max. workpiece diameter 40 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2,0 x 0,8 x 1,4 m

Condition: new, Hydraulic broaching machine Tsdpfxsxhci Is Ac Nsf

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs Tjdpfx Ascc D Ddjc Nof drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz Todewki Apopfx Ac Nof - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, Year of construction: 2007, Technical details: pulling force - max.: 9 t max. ram stroke: 2000 mm max. workpiece diameter: 900 mm total power requirement: 25 kW FRÖMAG electromechanically driven internal vertical broaching machines FSR guarantee economy and efficiency thanks to their special design features. Economy and efficiency. The drawbridge of the machine is designed so that broaching tool holders can be accommodated in accordance with market requirements. can be accommodated. The ball screws used to drive the drawbridge as well as the additionally hardened and ground round guides in conjunction with the together with the adjustable three-phase motors ensure that the machine runs very smoothly. Accessories such as feeds, shim controls, sliding tables, etc. make machine operation easier and enable machine operation and enable automation and integration into linking systems. Tedpfx Aew Duggsc Nof *

Year of construction: 1983, condition: excellent (used), machine/vehicle number: 03.2133, Arthur Klink - internal broaching machine (KOM 138) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 16 x1250 x400 built in: 1983 stroke: 1250mm pulling force: 16.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: in an excellent condition, ready to use, perfect slides Optional accessories available on request: pulling head, pick up tool holder Tsdpfx Ajd Nb A Nec Nsf Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Condition: used, Year of construction: 2000, Technical details: pulling force - max.: 2,5 t max. ram stroke: 1000 mm max. workpiece diameter: 40 mm Broaching speed: 60 m/min. return speed: 20 m/min. Tjdpjw Dugasfx Ac Nef total power requirement: 24 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m clamping plate: 320 mm

Year of construction: 1962, condition: good (used), machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 10.000 kg clearing length: 1.200 mm Tsdpfxet Dwb Dj Ac Nef Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 17065, Manufacturer: henning Model: U6/1000 Machine no.: 17065 Year of construction: 1979 Weight: 1.100 kg General / technical data: used mechanical vertical broaching machine Henning, in working condition Tractive force: 6,000kg (60KN) Clearing speeds: 3m/min and 6m/min Return speed: 6m/min maximum stroke: 1,000mm maximum tool length: 1,200mm table size / work surface: 600x460mm / 480 x340mm Table aperture: Ø 170mm with eccentric table insert with Ø 90mm bore for standard broaching mandrels (Rausch system) Workpiece diameter: any Dimensions (h x w x d): 1,650mm x 1,200mm x 700mm (h= table height to floor without superstructure) Motor: 7.4 /10kw Power supply: 380 Volt / 50 HZ Accessories / special equipment: - Integrated coolant system - Return circuit with double actuation mode - Machine documentation - Automatic clamping jaw opener in the lower drawbridge position (tool removal) - Tool clamping with universal clamping jaws for flat shanks DIN 1416 BL 6 Remark: The machine is in original condition, the function has been tested. The machine is mechanically driven by a trapezoidal threaded spindle and a geared motor. In contrast to most mechanically driven broaching machines in which the trapezoidal spindle forms the drive and guide element, this machine has additional guide columns. The machine is therefore additionally column-guided and very stable. The double spindle drive is ideal for a continuously constant cutting speed, even with higher tensile forces. The machine is in our warehouse and can be inspected under power. Todeup Uzfepfx Ac Nof