Used Kirchner Leipzig Meat Saw for sale (8,339)

Condition: good (used), Year of construction: 1992, I sell the automatic optimising saw GreCon Dimter 2004, year 1992. Input table automatic feeding / throughfeed system Outut table Fsdpfet Ir Nqex Ap Dspn 3 pcs. kickers on left outfeed table Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. Spare parts and Documentation included.

Condition: good (used), Altendorf WA8 sliding table saw Main motor: 5.5 kW, 3 cutting speeds Scoring saw: 0.75 kW, Table length: 320 cm, Tilt: 0-45 degrees, electrically adjustable Blade height adjustment: electrically adjustable Max. blade diameter: 400 mm, Cutting width on the right side: 1370 mm. Good condition, fully functional. Fodpfx Apeznw Dyo Depn

Condition: used, Altendorf Wa80 panel saw, 320cm sliding table on round rods, Main motor 5.5KW, 3 rotation speeds, Scoring unit 0.75KW, 0-45° tilt, electrically adjustable, Fpedpfx Asyhdb Hsp Don Saw blade up/down electrically adjustable, Max blade diameter 400mm, Max cutting width at right rip fence 130cm, Machine tested, fully functional.

Condition: used, Year of construction: 2022, Manufacturer: Scott Automation / Bladestop Model: BST400-RH Year: 2022 Condition: Used Serial number: 1007/22-414 Fpjdpfxsz Nir Do Ap Don Stock number: 3446 Cutting height: 420 mm Cutting width: 390 mm Saw blade: 3290 x 16 x 0.56 mm Compressed air: 6 - 7 Bar Power: 3 x 400V, 50Hz, 3kW Dimensions: 1100 x 1150 x 2100 mm Weight: 360 kg Glove check: Glove detection by means of color-sensitive scanning with a high-frequency camera.

Condition: like new (used), Year of construction: 2025, machine/vehicle number: 5401502010, functionality: fully functional, operating hours: 105 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 500 mm, cutting width (max.): 560 mm, control type: CNC control, roller diameter: 550 mm, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,522 mm, total length: 4,116 mm, total width: 2,030 mm, overall weight: 3,790 kg, table height: 810 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, lighting, rotational speed infinitely variable, PEGAS 540 CALIBER A-CNC metal-cutting band saw – a fully servo-driven band saw equipped with ball screws for the working movements of the saw arm and the feed mechanism for cut-to-length bar stock. This is a demonstration and exhibition machine from the manufacturer PEGAS-GONDA. The saw was only used at trade fairs and demonstration events between 2024 and 2026. The control system records only 105 operating hours. Key parameters: Automatic CNC metal-cutting band saw Cutting capacity up to Ø 550 mm Fpjdpfjzkcafex Ap Djn Automatic material feed SIEMENS S7-1500 control system and complete servo drive for all movements from SIEMENS. Touchscreen control and program storage Smooth belt speed control Robust industrial design for series production The machine is in virtually new condition, fully functional, and ready for immediate use. Original price of a new machine: €85,712 (excluding VAT) Selling price: €35,200 (excluding VAT) Inspection and demonstration are possible at the production facility in Slavkov u Brna by appointment. We can also offer roller conveyors with a load capacity of up to 2000 kg per meter.

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Fpsdpfx Aozn N Ikep Djn

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Fodpfx Apez Ehvxo Dopn

Condition: used, Cutting length: 3000 mm Cutting height: adjustable, 0 - 45 mm Fpedpfxoy Hrzae Ap Don Saw unit: 1.8 kW Clamping mechanism: operated via handwheel Location: Nattheim

Condition: used, functionality: fully functional, - Manufacturer: MEZ Frenštát p. Radh. - Type: F200 - Motor power: 30 kW - Single-shaft design Fpedpfxexa Evze Ap Djn - Max. height of processed material: 120 mm - Min. length of processed material: 2 m

Condition: new, SCM m3 multi-blade saw repair kit Fpsdpfx Ajz N Ha Sep Dsn Completely new, non-reconditioned track for the SCM m3 multi-blade saw, guide rail, and scrapers. Track for multi-blade saw – 4,500 euros Guide rail for track – 660 euros Scrapers – 365 euros

Condition: ready for operation (used), Model: Raimannnn K2 Fpsdpfx Ajz Rnhyep Den

Condition: used, This is an industrial meat mixer designed for efficient and uniform mixing of meat blends and other food products. The 450-liter bowl capacity and a batch output of 280 kg ensure high productivity in the meat industry and food processing facilities. Thanks to its stainless steel construction, the unit meets strict hygienic standards, is easy to clean, and guarantees long-term durability in operation. Technical characteristics Bowl capacity: 450 liters Fjdpozzzlzsfx Ap Djpn Batch output: 280 kg Bowl material: Stainless Steel (Inox) Power supply: 380 V / 50 Hz / 3P Connected power: 4.4 kW Dimensions (L x W x H): 1400 x 830 x 1350 mm

Condition: used, Martin T 60 panel saw Heavy-duty precision panel saw 3-axis positioning control with 5.7-inch touch screen 3-axis scoring saw Motor: 5.5 kW Saw blade can be tilted from 0 to 46° Motorized saw blade height adjustment Saw blade diameter up to 400 mm Cutting length: 3300 mm Cutting width with parallel guide: 1250 mm Manual adjustment of the parallel guide Fsdpfx Ajz Azxqsp Dopn Parallel guide position can be read on the touch screen Swiveling control panel above the table CE version Machine is WORKSHOP OVERHAULED and in TOP CONDITION Available from stock in Lieboch

Condition: like new (used), Vacuum filler Continuous vacuum filler for straight filling and portioning Machine features: All-in-one 250 l hopper with counter arm and reinforced scraper, Integrated vacuum pump 20 m³, Double screw, Standard double screw housing, Control: PC, Fpsdjw Up Ncspfx Ap Djn Program memory for 99 filling programs, Portion weight: from 5 up to 60,000 g, Lifting and tipping device for HPC with 250 l hopper, To fit standard trolley, 200 l capacity, Machine dimensions in cm: Width: 134.0 Length: 220.0 Height: 200.0 Power: 9.5 kW Voltage: 380 V, 50 Hz Weight: 1300 kg

Condition: used, Year of construction: 1990, 260 mm Rund documentation vorhanden automatic feeds ja Fpsdez D Iu Sopfx Ap Djn ja weight of the machine ca. 2,2 t dimensions of the machine ca. 1,7 x 2 x 2 m

Condition: new, Year of construction: 2026, functionality: fully functional, cutting range round steel at 90°: 320 mm, 2 units of Behringer HBE 321 A dynamic new machines available for immediate delivery from stock. Attention: You can receive up to 15% funding if you replace an old sawing machine with a new one! Equipment: Auto-Feed Control AFC Pro (Pos. 33) Active cut monitoring (Pos. 22) BEHRINGER screw-type chip conveyor (Pos. 105) Fsdpfxjz Epy So Ap Depn Automatic bar-end detection (Pos. 535) Lighting (Pos. 941)

Condition: new, Frozen meat block guillotine – NEW MACHINE 2 pcs knives for transverse cutting 5 pcs knives for longitudinal cutting Maximum cutting width: 460 mm Fpjdez D Skqopfx Ap Don Maximum cutting height: 300 mm Capacity: up to 1800 kg/h Temperature of frozen meat block: up to -20° C Control panel Hydraulic lifting device Machine dimensions in cm: Width: 90.0 Length: 160.0 Height: 185.0 Installed power: 5.0 kW Voltage: 380 V, 50 Hz

Condition: good (used), Year of construction: 2003, Machine is in good working condition. Parts shown by hand not come. Fpjdpfxjz Egnge Ap Don

Condition: new, mm Fpsdey I Db Ujpfx Ap Djn Working height bei 90° = 290 mm 0 45°/90°/45° 0 weight 1800 kg Cutting height at 45° 210 mm

Condition: new, mm Working height bei 90° = 315 mm 0 45°/90°/45° 0 weight 2050 kg Cutting height at 45° 230 mm Fpodpfx Aoy I Dcfsp Den

Condition: new, Scoring unit , kW Dimensions (L/W/H) , mm machine weight ab. , kg Masterwood MasterSaw Solid pressure beam saw with full features ----- Manufacturer's description: The MasterSaw pressure beam saws feature the following features: - Air-jetted cutting line - Height-controlled pressure beam - Controlled sawblade projection - 3 or 4 air-cushion tables, adjustable middle tables - Loading and unloading rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for sawblade changes - Saw carriage travel: 110 m/min, forward travel: max. 95 m/min - Pusher travel: return travel: max. 95 m/min - Machine weight: 6 t or 6.8 t - 8 or 10 double-finger clamps as standard - Double-roller side aligner - Intuitive machine software with graphical user guidance - Stress-relieving cut - Post-cutting option (nesting) - Front and rear cleaning flaps ----- MasterSaw Series Features: MasterSaw 320 - Outstanding Value for Money - Cutting Length 3,200 mm - 3 Air Cushion Tables, Adjustable Middle Table - 6 t Machine Weight MasterSaw 430 - Industry Standard for the Woodworker - Cutting Length 4,300 mm - 4 Air Cushion Tables, Adjustable Middle Table - 6.8 t Machine Weight MasterSaw 320/430 Features in Detail: - Saw Unit with Automatic Adjustment for Optimal Saw Blade Overhang - Scoring Saw Unit with 200 mm Saw Blade for Tear-Free Cuts at High Feed Speed - The saw unit is driven by a servo motor and a rack and pinion drive - The pneumatic pressure beam is always positioned parallel to the work table using a rack and pinion drive - The opening height of the pressure beam is monitored by the intelligent control system, ensuring The shortest cutting cycles are achieved. - Double-roller side aligner positions the panel strips in front of and behind the cutting line. - Material pusher with 8 (MS 320) or 10 (MS 430) double-finger clamps. Technical specifications MasterSaw 320/430: - Max. panel dimensions MS 320: 3,200 x 3,100 mm - Max. panel dimensions MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thicknesses up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW Fpedpfxexmk Ebs Ap Djn - Feed speeds: up to 95 m/min in sawing mode - up to 110 m/min in reverse mode - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE safety guard ----- Features of the MasterSaw Series: MasterSaw 430 L - Lifting table machine with 120 mm cutting height The solution for high productivity The MasterSaw 430 L features a lifting table loading system from the rear. Thanks to its 120 mm cutting height, it is also ideal for series production. Features and technical data of the MasterSaw 430 L - 4 t panel stack with a maximum stack thickness of 500 mm (900 mm in a pit on request) - Saw blade diameter: 450 mm - Cutting thicknesses up to 120 mm - Saw motor power: 18.5 kW - CE safety guard ----- Useful options if required: - Professional optimization software Optimization software including import of lists of up to 10,000 parts, management of panels available in sto...

Condition: new, cutting width max 610 mm Cutting height max 200 mm Fedpfx Ajyi Hthop Djpn Saw blade diameter 650 mm Motor output 11 kW

Condition: new, saw-blade dia. 500 mm Cutting height 120 mm Motor output 5,5/7,5 kW working length 4100 mm Fpjdpfewhf Ipex Ap Djn

Condition: new, 0 4000,5000 mm Working height 120 mm 0 ja Fpjdpfx Apsxmk Amj Djn

Condition: new, Sawblade tiltable 0-45 ° Length of the rolling table 3.200, 3.800 mm cutting width 1.300, 1,500 mm Motor output 7,5 kW Cutting height 177 mm Cutting height at 45° 133 mm Saw blade diameter 500 mm Speed 3000/3600/4200 U/min. work height max. 870 mm Dust suction hood 1x120, 1x100 mm Fsdpfetg Ailsx Ap Depn