Used Knee And Column Milling Machine for sale (89,259)

Condition: good (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 2,900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Work table Clamping surface mm 3000 x 1000 Table height mm 750 Number of T-slots 6 Size of T-slots mm 18 Travel distance X-axis mm 2900 Y-axis mm 1000 Z-axis mm 700 Distance top edge of table - bottom edge of spindle Spindle lower edge min/max. mm 150 / 850 Main spindle drive for speed 8000 min-1 AC motor, frequency-controlled kW 16 at 44% duty cycle Speed range: min -1 15 - 8000 Torque at 44% ED Nm 96 constant up to min -1 1500 Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect measuring system. Positioning accuracy Positioning accuracy X-,Y-axis to 1000 mm mm ± 0.0150 Repeat accuracy X-, Y-axis mm ± 0.0075 Positioning accuracy Z-axis mm ± 0.0150 Repeat accuracy Z-axis mm ± 0.0075 Tool magazine 2x 24-fold Design as disk magazine - Tool positions 16 - Tool shank (DIN 69871 / 69872) SK 40 - Max. tool diameter Tool diameter mm 76 - Max. Tool length mm 300 - Max. Tool weight kg 8 Machine control Heidenhain TNC 426 Splash guard cladding Covering of the entire work area, designed as partial area protection in accordance with the valid guidelines of the German accident prevention regulations (UVV) and the European standard EN 12417, with manually operated work area door including electrical protection and interlock. Machine door with polycarbonate glazing. 30 bar high-pressure coolant unit (IKZ) for the use of tools with internal coolant supply, switchable to 19 liters/min at 30 bar or 19 liters/min at 15 bar complete with separate paper band filter. Dcsdpfx Adew E Ey Hsdjr Internal cooling is also possible with air Clean tank capacity l 500 Degree of filtration my 30 Filter capacity l/min. 120 Hinged belt chip conveyor instead of the chip collection tray with integrated coolant tank, ejecting to the right Discharge width approx. mm 300 Discharge height approx. mm 1050 incl. coolant system Tank capacity liters approx. 150 Delivery rate l/min. 30 Pump capacity bar 2.0 HR 410 HEIDENHAIN hand-held control unit External hand-held control unit with built-in electronic handwheel, connected to the machine via cable, for manual movement of the axes, with emergency stop button Grease - central lubrication documentation Operating and programming instructions Hydraulic and pneumatic diagram Circuit diagram Test log

Condition: new, Year of construction: 2025, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (max.): 10,000 rpm, total width: 7,170 mm, total height: 4,620 mm, total length: 4,390 mm, table length: 2,500 mm, table width: 1,600 mm, table load: 10,000 kg, tank capacity: 24 l, tool length: 200 mm, tool diameter: 300 mm, THE MACHINE IS FULLY PREPARED FOR SHIPMENT FROM THE SUPPLIER'S WAREHOUSE IN CHINA. DELIVERY TO EUROPE: 1–2 MONTHS. PRICE INCLUDES INSTALLATION AND FULL WARRANTY. The GMF 2519T gantry machining centre is ideal for heavy-duty roughing (removal of large material volumes) as well as finish machining (final, high-precision processing) of large workpieces. In addition to these operations, the machine can perform: milling, drilling, boring, countersinking, reaming, rigid tapping, and other operations. Key Advantages - High-precision and productive machining of simple and complex parts. - Stable machining process with excellent repeatability. - Remote diagnostics and data management. - Wide range of configurations and accessories. STANDARD EQUIPMENT OF HT5L MACHINE - Fanuc Oi-MF CNC control system - CNC package for high-speed mould machining - Spindle BBT50 – 10,000 rpm - Tool magazine with 24 positions - Air-conditioned electrical cabinet - Spindle oil cooling system - Standard work area guarding with open top - Swivelling operator panel for machine and CNC system - Chip conveyor with integrated tank - Automatic lubrication system - Three-colour signal tower Dcjdpjxbd Ifofx Adder - Air blow gun - Coolant gun - Standard service tool set - Oil separator - Renishaw TS27R probe - Operation manual – mechanical part - Operation manual – electrical part - CNC system operation guides - BT50 taper test arbor for machine geometry check - CE-compliant design

Year of construction: 2001, operating hours: 27,046 h, condition: excellent (used), functionality: fully functional, CNC travelling column milling machine in cast design Highly stable design thanks to 3-fold guided X-axis and fixed table Machine is provided EXW TECHNICAL DETAILS X-axis (longitudinal) linear guide: 5,300 mm (3-fold) Y-axis (transverse) linear guide: 1,000 mm (2-fold) Z-axis (vertical) flat guide: 1,500 mm (2-fold) Speed range: 60 to 3,000 min-1 Tool holder: SK 50 tool changer: 40-fold Tightening bolt: DIN 69872-B Driving power: 30 kW tool dimensions: max. L=350mm / DM=200mm table dimensions: 6000x1000mm Heidenhain control: TNC426 with color screen and handwheel rapid traverse X, Y, Z axis: 10.000 mm/min clamping surface: 6.000 x 1.000mm T-slots: 22 H12 / distance 130mm Central T-slot: 22 H7 MACHINE DETAILS Duty cycle: 62,774 hours (as of 11/2022) Coolant outside: 1,1KW with 50l/min. Machine weight: 43.000kg EQUIPMENT - Electric handwheel Heidenhain - Pendulum machining function monitored with light barriers - New X-axis covers Dcodpfx Adolhqkhodsr - Chip conveyor 2-fold - New milling head bearing 2021 - Operating manual / Documentation CONDITION - Service and maintenance work has been carried out - Geometry in order - Suitable for pendulum machining Machine available from July-August

Condition: excellent (used), Year of construction: 2009, x-travel 6000 mm y-travel 2100 mm z-travel 1500 mm control HEIDENHAIN iTNC 530 feed 2- 20 m/min spindle turning speed range 20 -4000 U/min table dimension - longitudinal 7000 mm table dimension - cross 2000 mm total power requirement 79 kW weight of the machine ca. 55 t dimensions of the machine ca. 15 x 7 x 4,6 m The SORALUCE FP6000 is in very good condition. accessories as option: # clamping angle: 5'000.-€ # Clamping cube: 2'000.-€ # Div. tools & workbench: 2'000.-€ Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal milling head: - Tool holder: ISO 50, DIN69871 AD - Automatic tool clamping: Clamping force 20,000 N - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm - Tightening bolt: DIN 69872 form A - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane, 270 positions front plane) 270 positions front plane) - Diameter spindle bearing: 90 - Sealing air: 0,7 bar Main drive: - Drive type: three-phase motor - Drive power: 100 % ED 32 kW Djdjvwgl Ajpfx Addscr spindle: - Spindle speed: 20 - 4000 rpm - Full power from: 340 rpm - Torque at 32 kW/S1: 910 Nm - Speed control: 2 ranges infinitely variable via star/delta connection Rapid traverse: max. 35000 mm/min

Condition: used, Year of construction: 2015, machine/vehicle number: 5319, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,300 mm, BASIC MACHINE PowerSpeed 5 WITH FORK HEAD – KEY TECHNICAL DATA Travels: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive via a centrally bolted rack. Hardened compact roller guides ensure high precision. Machine base (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems ensure dynamic performance and accuracy. Protected by telescopic steel covers. Headstock slide and headstock: Made of GGG 60 cast iron, guided by compact roller guides. Optimal power transmission thanks to long guideways and close arrangement of the Y and Z axes. Dual-spindle drive: Two vertical ball screws with separate drives and measuring systems for high dynamics and long-term accuracy. Drive system: Individual digital drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring system: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-axis yoke head with motor spindle: Dcedpfxowdub Ds Addjr A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5″ C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3″ Motor spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid-cooled Electrical equipment: 400/230V, 50Hz, 80kVA power rating. Control cabinet (IP54) with control and switching devices. Machine-to-cabinet cable length: 5m. Control cabinet cooling: Two-chamber system with automatic internal air cooling and dehumidification. Lubrication: Centralized lubrication for guides, permanent grease lubrication for the main spindle, oil mist lubrication in the milling head. Power supply: Compressed air 4–6 bar, G 1/4 connection, with filter pressure regulator and condensate separator. Control: Siemens 840D sl with swiveling control panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote maintenance: Fault diagnosis via alarm manager, notification via email/SMS (SIM card and network required). TightBlock base frame (X = 8,000 mm): Solid composite construction for damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm of X-travel, structurally tested. Coolant system: 500 l tank, filter system

Condition: like new (used), Year of construction: 2014, Siemens 840 D Swivelling control panel including SIEMENS 840 D Solution Line control system. Travel X axis: 8000 mm Travel Y axis: 1300 mm Travel Z axis: 2200 mm Tool system: SK 50; Capto C8 Main spindle: 20–4000 RPM 3D volume model of the machine HEIDENHAIN measurement system on all axes. Automatic central lubrication with pressure and time monitoring for all axes and moving components. Measuring probe system RENISHAW RMP60 M Tool breakage detection via probe BRANKAMP CMS collision monitoring with two measuring channels: Center height, Fibro rotary clamp: 1100 mm Center width, Fibro rotary clamp: 900–3000 mm Max. swing diameter, Fibro rotary clamp: 2200 mm Dcodpjw Syv Uefx Addor Fibro rotary table D=1600; 250 RPM Carousel rotary table FIBRODYN 1600 mm: Table surface 6000x2000 mm d’Andrea facing slide Universal milling head Automatic tool changer ATC, 80 tool magazine slots in M version: 3 milling head slots High-pressure pump 30 bar Operating hours: 4261 h

Condition: new, Year of construction: 2025, XX100405 CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 370 Machine in stock Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D Djdjwhrlnepfx Addjcr - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR205249 One pairs of additional vices with independent positioning and vises modification: • Transformation of four standard vices to vices with independent positioning • Transformation of standard vices into extra clamping vices - PR205258 Pendular (2 working areas, 2 pieces) and oversides profiles machining: • Second X-FLOW • Right pneumatic fixed stop • Software to manage pendular machining • Safety devices for pendular machining • Tunnel for oversized profile machining • SW to manage oversized machining operations - PR205253 Device to measure profile length - PR205227 Device for integrity and measure of the tool - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715059 3D custom milling Module for FST CAM 4 - ZP715010 Module for rigid tapping and chase tapping - PR205268 Rear chip collection tanks for FMC 370 - PR205271 Centralised automatic lubrication system - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 (8 holders HSKF63, 8 collets and 8 HM milling cutters) - PR204497 Holder HSKF63 with cutter Ø 200 x 6mm - PR203785 Holder HSKF63 with blade Ø 200 mm

Condition: new, Year of construction: 2023, travel distance X-axis: 16,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,600 mm, Heidenhain / Siemens control Water-cooled inline motor 43 kW / 900 Nm Travel paths: X= 16,000 Y= 4,000 Z= 1,600 Milling heads: 2.5°x2.5° / 1°x1° / 0.001°x0.001° / Quill Additional equipment: Tool changer 40 / 60 / 80 / 100 positions NC tables Plate fields Carousel rotary tables Chip conveyor Fully automatic milling head changing system Dcodpfx Adjqy Hkajder Pendulum machining Splash guard enclosure Operator-assisting technology packages

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 65039, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Traveling column machine Generally overhauled 2023 Work table clamping area mm 1500 x 1000 Table height mm 750 Number of T-slots 6 Size of T-slots DIN 650 mm 18 Dcsdpfx Ajwv Nl Uoddsr Travel paths X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance table top edge - spindle bottom edge min/max. mm 150 / 850 Main spindle drive for speed 8000 min-1 AC motor, frequency controlled kW 16 at 44% ED Speed range: min -1 15 – 8000 Torque at 44% ED Nm 104 constant up to min -1 1500 Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect position measuring system. Accuracy Positioning accuracy X, Y axis to 1000 mm mm ± 0.0150 Repeatability X, Y axis mm ± 0.0075 Positioning accuracy Z axis mm ± 0.0150 Repeatability Z axis mm ± 0.0075 24-way tool magazine mounted on the right-hand side of the traveling column - Tool positions 24 - Tool shaft (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 - Max. tool weight kg 8 Machine control Heidenhain iTNC530 optional 620

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,600 mm, table length: 12,000 mm, table width: 2,000 mm, Travelling Column Milling Machine Technical Specifications Travel ranges • X-axis (bed): 12,000 mm • Y-axis (vertical): 2,600 mm • Z-axis (spindle head horizontal): 1,500 (1,200) mm Controller • CNC control: Heidenhain TNC 430 Automatic tool changer • Tool robot • 90 magazine positions Universal milling head in orthogonal design • Swivel range, milling head mount: 360 x 1 degree • Swivel range, milling head: 180 x 1 degree • Tool interface: SK 50 DIN 69871 • Spindle speed: 3,200 rpm Chip conveyor • Discharge height above floor: 1,250 mm • Conveying length: 12,000 mm Table area + rotary table • Clamping surface: 13,000 x 2,000 mm, including rotary table with a clamping surface of 2,000 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, as well as control retrofits. Djdpfowuy Udsx Addecr Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control retrofits _____ _____ _____ Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – cnc milling machine used – drill milling machine used – used metal milling machine – metal mill used – used metal milling machine – used cnc mill – cnc milling machines – large part machining – cnc large part machining – milling – SHW – UF6 – UF 6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine

Condition: used, Year of construction: 2013, machine/vehicle number: 5279, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 22 rpm, Year of construction 2013 Control system: SIEMENS Sinumerik 840D pl HSK 100-A tool holder TRAVEL horizontal-longitudinal X = 8,000 mm Vertical headstock slide Y = 1,600 mm Headstock horizontal-transverse Z = 1,300 mm FUNCTIONAL PROBE: m&h HSK 100 SIEMENS B-MPI HAND-HELD CONTROL UNIT TRAVELING WORK PLATFORM 3-SIDED SPRAY AND CHIP PROTECTION WALL CHIP CONVEYOR SPRAYING PLATE Sizes: Length: 10,000 mm Width: 2,500 mm WASHING GUN IN THE WORKROOM REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2000 l COLLISION MONITORING SYSTEM 2 CHANNEL pcs. 2 monitoring channels: - 1st collision monitoring orthogonal milling head (channel 1) - 2nd collision monitoring fork head (channel 2) Dcjdpfxsu Sppwe Addsr PENDULUM MACHINING 3 WORK AREAS MILLING SURFACE INTERPOLATION (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATION For fork head, arranged on clamping plate Storage positions 10 Maximum tool weight kg 12.5 Maximum tool length mm 200 Maximum tool diameter mm 63 Maximum tool diameter when free mm 250 Neighboring position Tool holder HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine 48 Maximum tool diameter with magazine filled to mm 125 Maximum tool diameter with mm 250 free adjacent positions Maximum tool length mm 500 - Maximum tool weight kg 25 Maximum tool load torque Nm 40 Tool holder HSK 100-A HEAD CHANGE MAGAZINE 1 pc.FORK HEAD WITH HIGH FREQUENCY SPINDLE AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE - High-frequency milling spindle: - Integrated high-frequency spindle - Tool holder HSK - A 63 DIN 69893 - Main drive power 20 kW at 100 % ED or 25 kW at 40 % ED - Speed range up to 20,000 1/min - Motor spindle bearing with permanent grease lubrication - Sealing air seal - Torque: 40 Nm at 100% ED, 50 Nm at 40% ED - Automatic tool clamping - Power transmission according to speed-performance diagram GMN HCS 170 - Technical data according to data sheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN - Liquid-cooled milling head - Cast construction made of GGG 60 - Milling head, automatically swivels 180 x 1 degree - The resulting positions can therefore not only be approached via the CNC control, but also programmed and processed - Repeat accuracy at the spindle nose ±0.002 mm, part accuracy thus ±3 sec - HSK 100-A tool holder - The milling spindle is equipped with a hydromechanical quick tool clamping system - Tool pull-in force: 45 kN - Internal coolant supply form A-D - External coolant supply via shower ring - Speed range 22- 4,000 1/min MAIN DRIVE by a frequency-controlled liquid-cooled AC motor with - 32 kW drive power at 100% duty cycle, 46 kW at 40% duty cycle. Direct power transmission WITHOUT gearbox, therefore no heating or wear of a gearbox. - 637 Nm torque at 100% ED, 875 Nm at 40% ED

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,600 mm, Hersteller: ZAYER, Typ: 30 KCU 6000-AR Baujahr: 2013 Serien-Nr.: 77258 5-Achs Verfahrwege (X/Y/Z) ca. 6000/3500/1600 mm, Werkzeugaufnahme SK50 2 heads: -45° Automatic Head -Direct Head Dcsdsw U E Unjpfx Adder 80-fach Werkzeugwechsler Steuerpult HEIDENHAIN iTNC 530 Späneförderband TECNIMETAL Kühlaggregat EURO COLD Aufspanntisch DEMMELER Kühlmittelanlage Sicherheitsabsperrung mit Lichtschranke LENZE

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis digital display K&C NEW, very good condition Technical data: >> Year of manufacture approx. 1975 Machine no. 0924 >> Rigid angle table (clamping surface 1000 mm x 440 mm) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Feed from 10 to 500 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2.2 KW >> Travel X/Y/Z: 800/300/400 mm (travel Y can still be moved by 200) >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable SK40 >> Tightening system S20x2 >> Weight approx. 1900 kg Accessories and equipment: >> 3-axis digital display K&C Newly installed with manufacturer's guarantee and operating instructions. Display device: reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, rows of holes, radius milling functions, etc. >> Mechanical central lubrication >> Operating instructions >> Hydraulic vice 160mm >> Walter rotary table 500mm Dodpfx Adovn N Hdjdscr About the machine: A Deckel FP3L universal milling machine in very good condition is offered. The vertical head can be moved by 200 mm to allow an even larger working area. A central pump ensures the lubrication of the various axes. The special feature of this type of machine is the basic structure; it is a machine with an inclined table bed. The movements are assigned to the work spindle and thus to the tool. The accuracy is therefore very high, since different workpiece weights have no influence on the axis movements. Mechanically and electrically tested. Take the opportunity to view and try out the machine on site with power on.

Condition: new, Year of construction: 2024, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,600 mm, Heidenhain / Siemens control Water-cooled inline motor 43 kW / 900 Nm Travels: X= 4,000 - unlimited Y= 2.600 / 3.200 Z= 1.600 Milling heads: 2.5°x2.5° / 1°x1° / 0.001°x0.001 / quill Further equipment: Tool changer 40 / 60 / 80 / 100 Dodpsqy Hinefx Addocr NC tables Plate fields Carousel rotary tables Chip conveyor Fully automatic milling head changing system Pendulum machining Splash guard cladding Operator-supporting technology packages

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Traveling column machine New machine Work table clamping area mm 1500 x 1000 Table height mm 750 Number of T-slots 6 Size of T-slots DIN 650 mm 18 Travel paths X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance table top edge - spindle bottom edge min/max. mm 150 / 850 Main spindle drive for speed 8000 min-1 AC motor, frequency controlled kW 16 at 44% ED Speed range: min -1 15 – 8000 Torque at 44% ED Nm 104 constant up to min -1 1500 Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect position measuring system. Accuracy Positioning accuracy X, Y axis to 1000 mm mm ± 0.0150 Repeatability X, Y axis mm ± 0.0075 Positioning accuracy Z axis mm ± 0.0150 Repeatability Z axis mm ± 0.0075 Tool magazine 24-way - Tool positions 24 - Tool shaft (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 Dcsdpfx Aovwip Doddsr - Max. tool weight kg 8 Machine control Heidenhain TNC 620

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,600 mm, table length: 10,000 mm, table width: 2,000 mm, Travelling Column Milling Machine Technical Specifications Travel Axes • X-axis (bed): 10,000 mm • Y-axis (vertical): 2,600 mm • Z-axis (horizontal ram): 1,500 (1,200) mm Control • CNC control: Heidenhain TNC 430 Automatic Tool Changer • Tool robot • 90 magazine slots Universal Milling Head in Orthogonal Design • Swivel range tool holder: 360 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Spindle speed: 3,200 rpm Dsdewuy Nbspfx Addocr Chip Conveyor • Discharge height above floor: 1,250 mm • Feed length: 10,000 mm Table • Clamping area: 10,000 x 2,000 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core business focuses on tool milling machines. Our services include spare parts delivery, on-site customer service, machine overhauls, and CNC control upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ _____ _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used boring milling machine - used metal milling machine - used metal mill - used metal milling machine - used cnc mill - cnc milling machines - milling machine - large workpiece machining - cnc large part machining - milling - shw - uf6 - uf 6 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 6 - UFZ 6 - UFZ6L - UFZ 6 L - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: used, Year of construction: 2001, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 800 mm, Travels: X-axis 1,200 mm Y-axis 650 mm Z-axis 800 mm Spindle drive Spindle mount SK50 Drive power 23 kW Spindle speed 7,300 rpm Internal coolant supply 25 bar NC rotary indexing table For positioning and circular milling Table diameter: 980 mm Table load: 2.5 t Electrical equipment: Power consumption: approx. 50 kW Automatic tool changer with chain Number of tool positions: 31 Dcsdpfx Adewgdktodjr Equipment/Accessories: - Torque: 680 Nm - Milling head automatically pivots from horizontal to vertical - Electric handwheel - Chip conveyor Space requirements: L x W x H: 5.4 x 3.5 x 3.5 m. Weight of the machine: approx. 12 t

Year of construction: 1999, condition: good (used), used moving column bed milling machine > make Kekeisen > type 1200/8 > year99 > With Heidenhain TNC 426 > > Spindle mounting SK40 > With 30-fold tool changer > Speed 20-7300 rpm > Rapid traverse 0-30 m/min Dcsdpfx Ajm Twc Teddsr > travels > X 1200 mm > Y 500 mm > Z 800 mm > Milling head automatically swivels in vertical > and horizontal position > Drive power 28 kw > Weight 12 to

Condition: used, Year of construction: 2004, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 77203, travel distance X-axis: 7,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 10,000 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, table length: 7,000 mm, table width: 1,500 mm, coolant supply: 15 bar, spindle motor power: 37 W, Equipment: documentation/manual, Accessories Automatic Milling Head (0.001 degrees in both planes) Cooling Through the spindle 60 ATC Chipconveyor Renishaw RMP60 part measuring Floorplates 7000 x 1500 mm Dcjdpfx Adswu R R Nsdjr Rotary Table 1200 x 1200 mm (5t) Extra manual Milling Head

Year of construction: 1989, condition: used, x-travel 1100 mm y-travel 600 mm z-travel 500 mm Control Heidenhain TNC 335 B* tool taper SK40 table surface - upper 1650 x 700 mm table face - lower 1870 x 300 mm spindle speed: 3000 Upm spindle motor ca. 9 kW control defekt!!!!! Horizontal and vertical milling Position change of the head is done manually-hydraulically Vertical head with drilling quill, drilling depth 100 m Djdpfed Ih Rxjx Addecr

Condition: good (used), Year of construction: 1990, 1 used well preserved CNC controlled tool milling machine as travelling column version with CNC path control GRUNDIG Dialog 11 Dodpfshhuf Hsx Addocr table size 1600 x 675 mm tool holder SK / ISO 40 traverse X-axis, longitudinal 1200 mm Y-axis, cross 600 mm Z-axis, vertical 500 mm table load 2000 kg speed range 20 - 6300 rpm feed range, stepless 2 - 10.000 mm/min rapid traverse in all axes 10 m/min quill stroke 80 mm Drive power 100 % ED 7.5 kW 40 % ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Switch cabinet weight 470 kg Accessories / Special features: - CNC tool milling machine suitable for tool, jig and fixture making, training as well as mold making. - CNC path control GRUNDIG Dialog 11 - Screen graphics, dialog guided input, 3 D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets also with islands, shift and rotation of the coordinate system - Electronic handwheel - Interface RS 232 - Swiveling vertical milling head +/- 90 - Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system - Spindle sleeve adjustment 80 mm - Horizontal milling device - Full protection cabin - Ball screw spindles in all 3-axes - Coolant system - Bele

Condition: excellent (used), travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 8 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, pivoting range: 340 °, table length: 5,000 mm, table width: 1,730 mm, Technical Specifications Travel Paths • X-axis (bed): 5,000 mm • Y-axis (vertical): 1,600 mm • Z-axis (headstock): 1,500 (1,200) mm Control System • CNC control: Heidenhain TNC 415 Feed Rate • X-, Y-, and Z-axes continuously variable from: 2 – 8,000 mm/min Universal milling head in orthogonal design • Motorized milling head swivel range: 340 degrees • Milling head swivel range: 180 degrees • Tool holder: SK 50 Clamping Plate • Clamping area: 5,000 mm x 1,730 mm • T-slots: 9 x 28 DIN 650 • T-slot spacing: 160 mm Year of manufacture: 1992 Partial overhaul: 2025 The machine can be demonstrated live in D-73479 Ellwangen. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our focus is on tool-milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls, and control system upgrades. Services: Dodpfx Aowfd Dkeddecr - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine – used milling machine – used traveling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used milling machine – used CNC milling machine – used drilling and milling machine – used metal milling machine – used metal milling machine – used metal milling machine – used CNC milling machine – CNC milling machines – CNC milling machines – milling machine – large-part machining – large-part machining – large-part machining – CNC large-part machining – milling – SHW – UF6 – UF 6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine

Condition: used, Year of construction: 2014, - - - - - travels - - - - - - - - - - - travel -x axis 10.000 mm travel -y axis 1.500 mm travel -z axis 4.000 mm - - - spindle - - - - - - - - - output 62.5 kW turning speed range 262 - 4.000 U/min Torque 2.280 Nm - - - table - - - - - - - - - Size of table plate 2x (2.500 x 3.000) mm longitudinal travel 2.000 mm max. load 30.000 kg solution 0,0005 ° solution 1,8 sek. table turning speeds 1,5 U/min - - - further technical details - - - - - - control Siemens 840 Dsl numbers of positions in the tool changer 80 tool taper ISO 50 max. feed 25.000 mm/min - - - T-slots - - - - - - - - - size of T-slots (DIN 650) 28 mm T-slot - distance 225 mm Milling machine | SPIRIT 140 - 2014 equipped with two HYDROSTATIC rotary boring tables (TRT30). The machine has only approx. 9.900 H working hours. Equipment: - Hydrostatic guideways - Cooling system - Handwheel with radio transmission (HBG 800-DP) - ITC (40 bar) - Tool changer (80 pcs. | ISO50) - Magazine for changing the milling heads with 3 places - Infinitely positionable universal head - Horizontal spindle extension (long version) - chip conveyor Dcsdpfx Ajwrztvoddjr - Laser probe with software for tool measurement and breakage control - Radio measuring probe (M&H) - Pendulum processing with partition The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SPIRIT-140 | SPIRIT140"

Condition: excellent (used), travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,600 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 24 m/min, spindle speed (max.): 3,200 rpm, rotational speed (max.): 3,200 rpm, pivoting range: 360 °, year of last overhaul: 2022, coolant supply: 16 bar, ejection height: 1,250 mm, tank capacity: 800 l, Technical Specifications Travel Paths • X-axis (bed): 8,000 mm • Y-axis (vertical): 2,600 mm • Z-axis (headstock horizontal): 1,600 mm Control System • CNC control: Heidenhain iTNC 530 Feed Rate • Y- and Z-axis continuously adjustable from: 2 – 24,000 mm/min • X-axis continuously adjustable from: 2 – 20,000 mm/min Universal milling head with orthogonal design • Milling head swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed: 3,200 rpm Chip Conveyor • Ejection height above floor: 1,250 mm • Feed length: 8,000 mm mm • Feed width: 350 mm Coolant system • Paper belt filter system o Tank capacity: 800 l o Pump capacity on the machine: 16 bar o Approx. 32 l/min Year of manufacture: 2005 • 2016: General overhaul of the headstock unit • 2022: General overhaul of the milling head About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our focus is on tool-milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ _____ _____ Dcedewfdalopfx Adder Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large-part machining - large-part machining - large-part machining - CNC large-part machining - milling - SHW - UF6 - UF 6 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 6 - UFZ 6 - UFZ6L - UFZ 6 L - Heidenhain - MBM milling machine - MBM machine - column milling machine

Condition: reconditioned (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, rotational speed (max.): 6,000 rpm, tank capacity: 1,200 l, SHW Powerspeed 5 Travel paths Djdpjv Dhw Tofx Addjcr • X-axis (bed): 10,000 mm • Y-axis (headstock): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Feed length: 10,000 mm Coolant system • Container capacity: 1,200 Liter ATTENTION the images are comparison images About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large part machining - large part machining - large part machining - CNC large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine