Used Drilling And Milling Machine for sale (87,306)

Condition: excellent (used), Year of construction: 2003, Model: G50 x 1600 Year: 2003 Radius of Arm: 1600mm Spindle Taper: MT5 Giodpfx Aexphw Teh Hol Spindle Speeds: 25 – 2000 RPM Max. drilling capacity: 75mm iron / 50mm steel

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Gjdpfx Ahju Dahns Hoil Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM Gijdjh U Nvkopfx Ah Hsl HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), functionality: fully functional, OERLIKON (Switzerland) Model : UB2 Giedpoxgcy Rofx Ah Hsl Spindle taper : MT3 Vertical Travel : 590mm Spindle speed : 25-2560 rpm Table size : 700X880mm

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, High precision drilling and milling machine Fehlmann model Picomax 51 CNC Heidenhain TNC 360 very good condition CE conform Hthrgw39X Technical Data: >> Year of construction: 1995 >> Travel X/Y/Z 420/ 240/ 120 mm >> Travel distance W 450 mm >> Clamping surface (L x W) 730 x 280 mm >> Permissible table load 75 kg >> Distance table - spindle nose 0 - 560 mm >> Feed speed X/Y 1 - 7200 mm/min >> Feed speed Z 1 - 3600 mm/min >> Tool quick-change system SF 32 >> Infinitely variable speed range 9200 rpm >> Drive power 4 kW >> Space requirement approx. (W x D x H) 2.0 x 1.5 x 2.4 m >> Fourth axis dividing head Gsdpfxsuxprlo Ah Heil About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 51 CNC in very good condition with CE conformity. It has a Heidenhain TNC 360 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The tool holders (see pictures) are included. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine under power on site.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm Gjdpfx Ahox Sw Nmj Hoil T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 °

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM Giedpfxoxz Aygj Ah Hsl W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Giodpfx Ahjx Tpytj Hsl

Condition: used, functionality: fully functional, BIMAK DRILLING AND MILLING MACHINE MOD. 25 USED MACHINE Giodpfx Ahsx Tt Uhj Hol

Condition: good (used), Year of construction: 1996, machine/vehicle number: 337794, Offer 25367 Technical data: - Drilling capacity: 25 mm - Tapping capacity: M16 - Drill spindle mount with clamping nut: MT3 - Drill spindle speeds: 100 / 205 / 330 / 420 rpm, 665 / 850 / 1375 / 2775 rpm - Drill unit height adjustable via hand crank - Minimum / maximum table-to-drill/milling spindle distance: 60 / 390 mm - Drill spindle stroke: 130 mm - Fine spindle feed adjustment via handwheel - Drill spindle reach: 260 mm - Drill/milling head tiltable left & right by 45° each - Coordinate table with 3 T-slots: 580 x 240 mm - Table travel: X-axis 415 mm, Y-axis 155 mm Gijdsx Tq Iropfx Ah Hel - Machine vice included - Drive: 400 V / 0.65 / 0.9 kW - Required space (approx.): W 900 x H 1800 x D 700 mm - Weight (approx.): 270 kg

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, total height: 2,700 mm, total width: 1,700 mm, total length: 2,000 mm, power: 0.01 kW (0.01 HP), CNC-Drilling and Milling machine, Control Heidenhain TNC 426, only 8500 h table size 380x920 mm, travel X/Y/Z/W - 500/350/610 mm, max. table load 250 kg, spindle speed stepless 50-10'000 rpm., spindle performance 10,2 kw, drilling capacity Ø 25 mm, tapping capacity M20, taper SK 30, tool changer 24 places, elektronic handwheel, central lubrication, oil mist filter, coolant refigitor, preparation for spindle coolant + Renishaw, lot of tools and holders, manual Godpfx Ahetvmtks Hoil

Year of construction: 1968, condition: good (used), For sale is a milling machine Deckel brand from 1968 The machine is in a good to very good condition and fully functional (No digital display but can be mounted additionally on request) Technical data: Giodpfxsihf Ete Ah Hjl Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm speed range: 40 - 2000 rpm spindle travel vertical: 60 mm spindle travel horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 330 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), Year of construction: 1987, machine/vehicle number: 140379007, Technical details: X - path 2200 mm Y - travel 1600 mm Z - travel 1600 mm W - travel 900 mm B - 360° Work tables: Table length 1700 mm Table width 1520 mm Table height 180 mm Table movement X-axis 2200 mm Table movement Z-axis 1600 mm Table load 8 t Speed_max 1000 Rpm Speed_min 2.5 rpm Motor power _11 kW_/ 13 kW Input power 23.2 kW Spindle diameter ∅ 130 Feed length W-axis 900 mm Rapid traverse X-axis 2.7 mm/min Rapid traverse Y-axis 2.7 mm/min Rapid traverse Z-axis 2.7 mm/min Giodpfxetyi Ipe Ah Hsl Tool holder ISO 50 Number of controlled axes 5 Position of the milling head Horizontal Workpiece weight (max) 8 000 kg Machine dimensions Length 6000 mm width 4500 mm Height 4850 mm Machine weight cca: 20000 kg The machine can be viewed under power by appointment and is in very good condition. is in very good condition.

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Gsdpex S Rcmjfx Ah Hjil

Condition: new, functionality: fully functional, travel distance X-axis: 565 mm, travel distance Y-axis: 210 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, total height: 1,120 mm, total length: 710 mm, total width: 890 mm, type of input current: DC, overall weight: 240 kg, table length: 840 mm, table width: 210 mm, power: 1.5 kW (2.04 HP), distance table to spindle center: 360 mm, WMD30LV - 230V / 1Ph Drilling capacity in steel ----- 32 mm Milling capacity in steel ----- 20 mm Face milling ----- 76 mm Motor ----- brushless 1.5 kW Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 70 mm Spindle taper ----- ISO 30 Gedoga T Agjpfx Ah Hjil Worktable ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal travel ----- 565 mm T-slots ----- 3 x 14 mm Throat ----- 240 mm Spindle-to-table distance ----- 470 mm Weight ----- 230 KG STANDARD ACCESSORIES * Drill chuck incl. drill arbor * Digital depth stop * Digital spindle readout * Fine adjustment * Left / right rotation * Milling head can swivel 90° left/right * Toolbox OPTIONS * 3-axis digital readout * Base cabinet * Automatic longitudinal feed * Milling vise * ISO30 collet chuck & 12 collets in case * Milling cutter set

Condition: new, Drilling and milling machine OPTIMUM OPTImill MB 4 - Exhibition machine - This offer is an equipment package. The following items and options are already included in the price: Gijdpfxeu R Tftj Ah Hsl - OPTImill MB 4 Optimum precision drilling and milling machine - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 240 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, throat depth: 350 mm, quill stroke: 130 mm, total length: 1,250 mm, total height: 1,900 mm, table width: 225 mm, total width: 1,100 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: MK-4, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, drilling capacity Ø 40 mm, motor 1,9 /2,2 KW, table size 800x225 mm, spindle speed 45-1650 rpm stepless, MT-4, el. table arising device, automatic spindle feed, coolant device, dimensions 1250x1100x1900 mm, weight ca. 600 kg Gedpfx Ahjwt Swzo Heil

Condition: new, Solid Hans Schreiner drilling machine Z5045C/1 for the commercial demand. with automatic quill feeder, work light, coolant system and drill chuck Godpfx Asvrv I Ajh Hsil Technical data: Spindle cone MT 4 Motor output power S1 1,1 kW, 400 V Table dimensions 730 x 210 mm max. wokrpiece height 700 mm Speed 12 80 till 2500 U/min Worktable travel 500 x 205 mm Weight 470 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 250 mm, feed length Z-axis: 160 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 9,000 rpm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 1 m/min, spindle speed (min.): 100 rpm, quill diameter: 160 mm, table width: 320 mm, table length: 880 mm, We are offering a Fehlmann Picomax 54, year 2001, in very good condition. The machine has seen limited use, as our production mainly relied on larger automatic CNC machines. Details: Manufacturer: Fehlmann Gsdpfxoxwk D Ej Ah Hsil Model: Picomax 54 Year of manufacture: 2001 Condition: Fully operational, can be tested on-site Location: Boxtel, The Netherlands Availability: Immediately This is a reliable and precise machine, ideal for toolrooms, prototypes, or small production runs. The production company is closing in the Netherlands, so the machine is available for immediate sale.

Condition: new, Year of construction: 2025, functionality: fully functional, Table size 800 x 240 mm Table area 730 x 210 mm “T” slot size on table 14 (M12) Speed ​​range 75 – 3200 rpm Drilling capacity in cast iron 45 mm Drilling capacity in steel 32 mm Longitudinal movement range (X) 560 mm Transverse movement range (Y) 190 mm Vertical travel range (Z) 350 mm Tool holders ISO40/Morze 4 Spindle - column distance 460 mm Distance between spindle nose and table surface 445 mm Giedpfx Aexz D Npjh Hjl Spindle stroke 120 mm Total machine height in Z upper position 1450 mm Spindle can be tilted +/-90 degrees Spindle power 1.1/1.5 / 400V Machine weight 480 kgs Dimensions 1280 x 960 x 2100 mm Accessories - Thread cutting function - 3-way path measuring system - Y+Z axis covers - ISO40 drill chuck adapter - Built-in digital depth gauge - Automatic X-axis stepless feed and rapid traverse - Motorized gear lifting and lowering - Machine lamp - Cast iron machine base The machine is in brand new condition. Never used in production.

Condition: good (used), 1 x geared drilling and milling machine Arboga UFB 3008 Nice machine from a small toolmaking shop. Speeds: 100 - 3200 rpm in 8 steps / 2 via motor Spindle mount: MT 3 Table: 240 x 580 mm Accessories: Gisdpfex Rpxdsx Ah Hol 1 x drill chuck 1 - 16 mm 1 x tapping chuck 4 x MT 3 drills 1 x machine vice 1 x dividing head with 3-jaw chuck The machine can be inspected under power

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, spindle speed (max.): 2,340 rpm, spindle speed (min.): 32 rpm, spindle mount: MK 4, throat depth: 293 mm, quill diameter: 72 mm, quill stroke: 145 mm, total length: 1,340 mm, total height: 2,050 mm, table width: 225 mm, total width: 1,280 mm, table length: 800 mm, drilling capacity: 50 mm, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, DRO on 3 axis, drilling capacity Ø 50 mm, motor 2,2 / 3,0 KW, table size 800x225 mm, spindle speed 32-2340 rpm stepless, MT-4, el. tapping device, machine light, coolant device, dimensions 1340x1280x2050 mm, weight ca. 780 kg Gisdpfxjwn E Sbo Ah Hjl

Condition: new, Drilling,- and milling machine with a 90° pivoting gear head for the commercial demand. Incl. halogenlamp, 3-axis-digital display and coolant system Without underframe Technical data: Spindlecone MT 4 Motor output power S1 1,1 kW, 400 V Weight 325 kg Table dimensions 800 x 240 mm max. workpiece height 420 mm Godpfx Aevrv Nash Hsil Speeds 12, 80 till 2500 rpm 80/150/260/380/710/1250/ 160/300/520/760/1420/2500 U/min lling capacity in steel 45 mm Worktable travel x=585mm, Y= 205 mm Milling table tilt 38° Optional equipment: Drill chuck, quick release chuck, milling cutter and tools

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, quill stroke: 120 mm, quill diameter: 75 mm, total length: 1,000 mm, total width: 850 mm, total height: 1,900 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, spindle mount: MK 3, drilling capacity: 32 mm, nominal power: 0.75 kW (1.02 HP), table length: 730 mm, table width: 210 mm, throat depth: 270 mm, Milling-/Drilling Machine, DRO on 3 axis, drilling capacity Ø 32 mm, motor 0,75, cross table size 730x210 mm, spindle speed 50-2500 rpm, MT-3, tapping device, machine lamp, coolant device, tapping device, dimensions 100x850x1900 mm, weight ca. 400 kg Gjdox Ebi Iepfx Ah Hoil

Condition: used, Drilling and milling machine Hans Schreiner ZAY7040G, year 2009, in very good condition, 1.5 kW, 800 mm table length, 240 mm table width, 300 kg Prices subject to change; errors and misprints excepted. Gjdpfx Aox H Ui Heh Heil