Used Traveling Column Machining Center for sale (70,719)

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,800 mm, total length: 7,000 mm, total width: 4,000 mm, table width: 635 mm, overall weight: 11,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 36, tool length: 340 mm, tool diameter: 70 mm, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain iTNC 530 Travel X [mm]: 2,000 Travel Y [mm]: 600 Rbjdpfx Aox Tg Stsdbot Travel Z [mm]: 800 Installation dimensions LxWxH (mm): approx. 7,500 x 4,500 x 3,100 mm Weight (kg): approx. 11,000 Spindle: Max. speed: 10,000 rpm Max. drive power: 16 kW at 40% duty cycle Max. torque: 80 Nm at 40% duty cycle Tool holder: SK40 CNC Swivel Head: Swivel range: +/- 105° Selectable: either continuous or indexable with clamping General: Direct position measuring system on X/Z/Y axes Tool magazine with 36 stations Electrical connection: 400V/3Ph/50Hz Connected load: approx. 55 kW Compressed air connection: 6-8 bar Equipment / Accessories: Rotary table as shown Electronic handwheel Chip conveyor

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Rsdpfxsx Sw Hfj Adbebt Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Further information: Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Machine can be inspected under power by arrangement.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, spindle speed (max.): 15,000 rpm, MMV 4200 GANTRY-TYPE MACHINING CENTER FOR 5-AXIS SIMULTANEOUS MACHINING WITH HEIDENHAIN TNC 640 5-axis simultaneous gantry-type machining center with integrated water-cooled motor spindle. Control: HEIDENHAIN TNC 640 • Conversational programming • USB and Ethernet interface • 24" TFT color monitor • 3D visualization, programming graphics Spindle: Water-cooled motor spindle Spindle power: 46 kW Spindle speed: 50 - 15,000 rpm Rbsdpeychf Sofx Adbet Spindle torque: 170 Nm Tool holder: ISO 40 DIN 69871 Pull stud: ISO7388/2 Type B (not included in the basic version) Travel: X = 4200 mm, Y = 1000 mm, Z = 950 mm Distance spindle nose to table: 0-950 mm Rapid traverse (X-Y-Z): 60/50/50 m/min B/C axis: 50/100 rpm Fixed table: Cast iron table with T-slots Number - width - spacing: 7 - 18 mm - 125 mm (central alignment slot 18H8) Clamping surface: 4400 x 1050 mm Maximum table load: 6000 kg (evenly distributed) Swivel head (B axis): Torque motor, swivel range +120°/-120° Rotary table (C axis): Torque motor, table diameter 900 mm Maximum table load: 2000 kg Rotary table accuracy: 0.05 mm +/-0.02 mm, recessed under the fixed table Stationary tool changer: Drum magazine on the left side of the machine with 40 tool stations Tool change time (chip-to-chip, VDI2852): approx. 15s Coolant pump: Pressure 6 bar, delivery rate 40 l/min (nominal at pump) Work area lighting: 4 LED lamps Standard equipment: • Linear glass scales in X/Y/Z axes • Central lubrication with grease • Handwheel • Alarm lamp • Work area lighting • Electrical cabinet air conditioner

Condition: used, Year of construction: 2006, operating hours: 13,016 h, functionality: fully functional, machine/vehicle number: 86664, travel distance X-axis: 2,940 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 950 mm, overall weight: 16,500 kg, number of slots in tool magazine: 36, Equipment: documentation/manual, - Year of manufacture: 2006 - One owner, used exclusively by us - Fully functional, powered on, ready for demonstration - Control: Heidenhain iTNC 530 - Control on: 32,532 hours - Program run: 13,016 hours - Spindle: SK 40 / 12,000 rpm | 40 kW - Tool magazine: 36 positions - Travel X-axis: 2,940 mm Rbsdpfx Aox Hhfbedbjt - Travel Y-axis: 900 mm - Travel Z-axis: 950 mm - Rotary table: Ø1000 mm - 3D probe: RMP 60 Renishaw - Tool probe: TT140 Heidenhain - Coolant through spindle: 40 bar Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 0112, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 9,000 rpm, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025! TECHNICAL DETAILS Travel distances Travel X: 1,500 mm Redpfx Asw Hrh Hedbjbt Travel Y: 3,500 mm Travel Z: 1,000 mm Worktable dimensions: 4,500 x 1,600 mm Spindle and Tooling Max. spindle speed: 9,000 rpm Swivel range of angular head (B-axis): ±90° Tool holder: SK 40 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 8,000 x 5,000 x 3,700 mm Weight: 32,000 kg EQUIPMENT 2 ALMATIC machine vices Various clamping devices for the machine Technical documentation

Year of construction: 2005, condition: ready for operation (used), X-axis: 2000mm, y-axis: 750mm, z-axis: 800mm, max. workpiece weight: 2.5t, spindle hours: 12000h, connected load: 60kVA, length: 4000mm, width: 3100mm, height: 3200mm, weight: 22t, with documentation and tools, has been regularly serviced, on-site inspection is possible, the machine will be available from July 2024. Rbodpfspvk Ahsx Adbet

Condition: used, Year of construction: 2007, Urban AP 6500 F - travelling column milling machine - Heidenhain path control iTNC 530, control panel can be moved over the entire machining length - robust basic structure as a welded frame construction - ball rail guides on all axes - milling spindle unit: 80 - 6000 rpm, tool holder SK30 Rsdpfx Aeu Awm Sodbsbt - X-axis with rack and pinion drive (30 m/min) - Y-/Z-axis with recirculating ball screw (20 m/min) - 6 chip drawers - swivel clamping device for 6200 mm workpiece length - 12 pneumatic workpiece clamps - manually operated central lubrication - moving plate tool changer for 8 tools - micro spray - cooling emulsion pump - machine light - safety fence - safety bumper - safety light grid - machine protection hood opens pneumatically vertically - control on: 33922 h - Program run: 9847 h - Spindle on: 7221 h - Year of manufacture 2007 Technical data - Travel paths X/Y/Z: 6500 / 275 / 310 mm - Working area X/Y/Z with swivel device: 6200 / 155 / 110 mm - Rapid traverse X/Y/Z: 30 / 10 / 10 m/min - Continuous feed: 0 - 5000 mm/min - Tool change: Disc changer with 8 tool positions - Tool holder: SK30 - Tool clamping: pneumatic - Coolant system: Micro-spray for flow drilling, cooling emulsion - Spindle speed: 80 - 6000 rpm - Speed correction: 80 - 120 % - Drilling capacity in St60/Alu Ø: up to 18 / 20 mm - Thread cutting capacity: up to M14 / M16 - Position measuring system: rotary encoder - Positioning accuracy: 0.05 mm - Repeatability: 0.025 mm - Machining accuracy tolerance: ± 0.2 mm - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Noise emission: 79 dBA - Motor power: 15 kW - Electrical connection: 3x 400 V ± 5% / 50-60 Hz - Pre-fuse: max. 25 A - Power consumption: approx. 13 kVA - Control voltage: 24 V DC - Space requirement with safety fence: approx. 34 m² (11.4 x 3 m) - Machine weight with accessories: approx. 5000 kg

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 8 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, pivoting range: 340 °, table length: 5,000 mm, table width: 1,730 mm, table height: 300 mm, Technical Specifications Travel Paths • X-axis (bed): 5,000 mm • Y-axis (vertical): 1,600 mm • Z-axis (spindle head): 1,500 (1,200) mm Control System • CNC control: Heidenhain TNC 415 Feed Rate • X, Y and Z axes steplessly adjustable from: 2 – 8,000 mm/min Universal Milling Head in Orthogonal Design • Motor-driven milling head swivel range: 340 degrees • Milling head swivel range: 180 degrees • Tool holder: SK 50 Clamping Table • Clamping surface: 5,000 mm x 1,730 mm • T-slots: 9 x 28 DIN 650 • T-slot spacing: 160 mm Year of Manufacture: 1992 Partial overhaul: 2025 The machine has been recommissioned and inspected at MBM. It can be demonstrated under power at D-73479 Ellwangen. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Our services: - Used machinery - Spare parts - Customer service - Machine service - Machine overhauls Redeyf Ai Rspfx Adbsbt - Control system modernization _____ Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used CNC milling machine – used boring and milling machine – used metal milling machine – used metalworking mill – used CNC mill – CNC milling machines – CNC milling centers – milling machine – large-part machining – CNC large-part machining – milling – SHW – UF6 – UF 6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine

Condition: used, Year of construction: 1999, x-travel 5.850 mm y-travel 1.200 mm Rbjdpfsydfmiox Adbjt z-travel 2.000 mm control HEIDENHAIN TNC 430 D table-size 6.120 x 1.000 mm table weight 20.000 Kg internal coolant system feed 20 bar Chip coveyor inkl. handwheel HEIDENHAIN HR-410 Tools changer 60 fach/tools taper ISO ISO 50 engine output 30 kW working speed 5.000 mm/min rapid taverse 12.000 mm/min Number of revolutions 20 - 3.000 rpm total power requirement 41 kW weight of the machine ca. 31 t

Condition: used, Year of construction: 1999, x-travel 3.400 mm y-travel 1.250 mm Rbodpjydfmcsfx Adbjt z-travel 2.000 mm Control TNC- 430 PA table-size 4.700 X 1.200 mm V- travel 500 tool taper ISO 50 milling head -swivable 0.001º/0.001º Grad main drive 37 kW Chip coveyor inkl handwheel HR-410 Tools changer 60 pos. milling head Automatic Head 45º weight of the machine ca. 35 t - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1

Condition: used, Year of construction: 2000, x-travel 22.000 mm y-travel 1.500 mm z-travel 3.000 mm control SIEMENS 840 D milling head -swivable 0,001/0,001 Grad milling head Universalfräskopf 45° Internal cooling system 20 bar Chip coveyor ja Rbedpjxvtf Nsfx Adbet Tools changer 30 pos. coolant 1.100 l Tool taper DIN 69871A ISO 50 total power requirement 45 kW weight of the machine ca. 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /INCLUDED Coolant System in Electrical Cabinet INCLUDED Machine Weight 68.000 Kg. Machine Colour RAL 7038 – 5012 Portable Handwheel INCLUDED

Condition: used, Year of construction: 1998, x-travel 4.300 mm y-travel 1.200 mm z-travel 1.500 mm control Heidenhein TNC 426 PB table-size 6.120 X 1.000 mm taper ISO ISO-50 Number of revolutions 20 - 3.000 rpm work speed 5.000 mm/min handwheel HEIDENHAIN HR-410 Rbodpfjxvtgasx Adbjt table weight 20.000 Kg Tools changer 40 fach/tools rapid traverse 12.000 mm/min weight of the machine ca. 28 t

Condition: used, Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: PC Fusion 640 M, total height: 3,100 mm, total length: 5,200 mm, total width: 3,460 mm, table width: 2,000 mm, table height: 760 mm, table load: 1,400 kg, overall weight: 12,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, CNC Control Mazatrol PC Fusion 640 M Table size 2000 x 760 mm Rbsdpfx Aoyddlwsdbst Table load 1400 kg Number of pallets: 1 x Movement X-axis 1740 mm Movement Y-axis 760 mm Movement Z-axis 660 mm 4th Axis (Rotary table) Kitagawa MR 250 Spindle taper CAT 40 Spindle speed 12.000 1/min Spindle motor 11/7,5 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2014, operating hours: 24,970 h, machine/vehicle number: 15175183974, Stock no.: 371400, travels X/Y/Z: 1,800x700x700 mm, max. workpiece weight: 1,500 kg, spindle speed: 20 - 8,000 rpm, tool holder: SK40, 60-position tool changer, machine weight: 13,250 kg, equipped with SIEMENS Sinumerik 840D sl control, electronic handwheel, chip conveyor, stock no.: 473100, hydraulic unit, with T-slot clamping table, approx. 210x70 cm, with integrated rotary table, zero-point clamping system, 4x NC vices HILMA NC 125, 1 GARANT Zeroclamp console Rjdpfsyciunsx Adbebt

Condition: new, BRAND NEW TRAVELLING COLUMN MILLING MACHINE HEIDENHAIN TNC 640 CNC control system HEIDENHAIN 19" TFT display HEIDENHAIN package (motors, measuring systems, and HR 550 FS electronic handwheel) X-axis: 8,000 mm (optionally extendable by 1,000 mm increments) Y-axis: 1,500 mm Z-axis: 2,500 mm (optionally extendable by 500 mm increments) Worktable: plate field, rotary table, etc. Automatic universal swivel head 1°x1° - SK 50 DIN69871/A Maximum spindle speed: 6,000 rpm (oil-cooled) Maximum spindle motor power: 66 kW ICS – internal coolant supply – 36 bar Rjdpfx Aeh Ekucsdbjbt Rapid traverse X, Y, Z: 30 m/min Positioning accuracy: 0.040 mm Repeatability: 0.015 mm Chain tool changer: 60 stations (option up to 150 tools) Hinged belt chip conveyor Only enquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: used, Year of construction: 2000, x-travel 6000 mm y-travel 1600 mm z-travel 1300 mm control FIDIA C20 /4H-SB tool taper SK50 spindle turning speed range 22 - 4000 U/min SHW – UFZ5 Year of manufacture: 2000 Specifications X-axis 6000 mm Y-axis 1600 mm (stroke with vertical head rotated 1900 mm) Z-axis 1300 mm Orthogonal head 2 axes, indexed 1° Automatically swivelling milling head holder (rear) 360x1 degree Automatically swivelling milling head holder (front) 180x1 degree Control: Fidia - C20 / 4H-SB SK 50 - DIN 69871 Infinitely variable feed range; X-axis: 2–12,000 mm/min. Y-axis: 2–18,000 mm/min. Z-axis: 2–18,000 mm/min. Rapid traverse; X-axis: 12,000 mm/min. Rbsdpfx Adoxmaqyebot Y-axis: 18,000 mm/min. Z-axis: 18,000 mm/min. Spindle/auto. Milling head: Speed 22 - 4,000 rpm Torque max. 1180 Nm Total current load: approx. 50 kVA/80 A. Without clamping plate Without chip conveyor

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar Rjdpfx Asxwdygodbsbt NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 5,824 mm, travel distance Y-axis: 897 mm, travel distance Z-axis: 1,005 mm, rapid traverse X-axis: 6,000 m/min, rapid traverse Y-axis: 8,000 m/min, rapid traverse Z-axis: 8,000 m/min, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, Equipment: documentation/manual, SHW UFZ 4 Travel distances • X-axis (bed): 5,824 mm • Y-axis (horizontal spindle stock): 897 mm • Z-axis (vertical): 1,005 mm Control • CNC control: Heidenhain iTNC 530 Clamping plate • Clamping surface: 5,000 x 2,000 mm Rbodpfx Aex Uw Egedbst Cross-traversing rotary table • Diameter: 1,400 mm (flattened) • Cross-axis travel: 1,131 mm Rapid traverse • X-axis: 6,000 mm/min • Y- and Z-axis: 8,000 mm/min Horizontal and vertical milling head • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm • Internal coolant supply • Spindle orientation with cycle 13 • Tapping without compensating chuck • The milling head was recently completely overhauled Automatic tool changer • Tool magazine for 45 tools Coolant system • Belt filter Chip conveyor Splash and chip guard General overhaul including control upgrade in 2008 About the company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core business is in the field of tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls as well as control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization ----- Used machine – used milling machine – used travelling column milling machine – metal machining – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used boring milling machine – used metal milling machine – used metal mill – used cnc mill – cnc milling machines – milling machine – large part machining – cnc large part machining – milling – Heidenhain – MBM milling machine – MBM machine – column milling machine

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis digital display K&C NEW, very good condition Technical data: >> Year of manufacture approx. 1975 Machine no. 0924 >> Rigid angle table (clamping surface 1000 mm x 440 mm) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Feed from 10 to 500 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2.2 KW >> Travel X/Y/Z: 800/300/400 mm (travel Y can still be moved by 200) >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable SK40 >> Tightening system S20x2 >> Weight approx. 1900 kg Accessories and equipment: >> 3-axis digital display K&C Newly installed with manufacturer's guarantee and operating instructions. Display device: reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, rows of holes, radius milling functions, etc. Rbodpfx Adovn N Hdobot >> Mechanical central lubrication >> Operating instructions >> Hydraulic vice 160mm >> Walter rotary table 500mm About the machine: A Deckel FP3L universal milling machine in very good condition is offered. The vertical head can be moved by 200 mm to allow an even larger working area. A central pump ensures the lubrication of the various axes. The special feature of this type of machine is the basic structure; it is a machine with an inclined table bed. The movements are assigned to the work spindle and thus to the tool. The accuracy is therefore very high, since different workpiece weights have no influence on the axis movements. Mechanically and electrically tested. Take the opportunity to view and try out the machine on site with power on.

Condition: used, 5000 mm x 1200 mm 2 x Heidenhain 426 ISO50 Redpfx Adoyf Nkhjbsbt

Condition: new, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 9,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 62,000 kg, coolant supply: 36 bar, workpiece weight (max.): 62,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, FACTORY-NEW GANTRY MILLING MACHINE Controls and Drives: Two HEIDENHAIN TNC 640 digital path controllers (one at the front of the machine and one at the rear inside the enclosure) HEIDENHAIN package: motors, measuring systems, and handwheel Additional Equipment: Chain-type automatic tool changer with double gripper, 60-position magazine Double hinge-type chip conveyor (longitudinal), one at the front and one at the rear Accuracies: Positioning accuracy: ± 0.040 mm Repeatability: ± 0.008 mm Only inquiries from Germany will receive a response. Rsdpfxjm Tv D As Adbobt

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Redpfxjxcgtgj Adbebt Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY-TYPE MILLING MACHINE Control and Drives: Two HEIDENHAIN TNC 640 digital path controllers – one at the front of the machine and one at the rear in the cabin HEIDENHAIN package (motors, measuring systems, and handwheel) Additional equipment: Chain-type tool changer with dual gripper, 60-tool capacity Rodpfovrv Sujx Adbjbt Dual hinged belt chip conveyors (longitudinal), one at the front and one at the rear Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Only inquiries from Germany will be answered.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 15,000 rpm, Matec 5000 Travel: 5000x800x800 mm Table size: 5000x850 mm Kessler spindle, 15,000 rpm Tool holder: SK40 Tool magazine: 45 tools Rbodpfx Ajych R Isdbst

Condition: excellent (used), Year of construction: 1997, CNC travelling Column machine Table 10,000mm Length x 1100mm Width X Travel 8500mm Y Travel 1600mm Z (Ram Travel) 1200mm 60 Station tool changer Integrated horizontal & Vertical rotary table (CNC) Spindle BT50 Spindle 20 - 2000RPM Siemens Sinumerik CNC Control Rbodpfex El E Aex Adbot