Used Kreissaege Feed for sale (11,317)

Condition: used, machine/vehicle number: 005685, Max. panel width: 1200 mm Max. panel length: 3200 mm Lodpfx Ajyg Ec Nsbcehd Max. panel stack height from the ground: 1600 mm Lifting capacity: 100 Kg Movement system: suction cups.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Lhsdjxnpx Nepfx Abcjd

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Lodpjyizxrefx Abcohd

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. Lhjdovgbgaepfx Abcod *

Condition: used, Technical details: plate width: 400 mm max. stroke: 600 mm control: extern weight of the machine ca.: 0,4 t dimensions L x W x H: 2.7 x 0,8 x 0,62 m Hydraulic sheet feeder, belt feeder External control in combination with processing machine. -Insertion length approx. 800mm -Infeed height approx. 500mm -Motorized/hydraulic operation Lhsdpfx Aou Iczfobcod On sale as described. *

Condition: new, Year of construction: 2021, machine/vehicle number: 0-250-87-1000, functionality: fully functional, Equipment: CE marking, NEW THROUGHFEED DRILLING MACHINE DRILLTEQ V-200 (BHX 055) Standard features •Drilling head with 13 spindles •Horizontal drilling head with 4 spindles in X-direction •Horizontal drilling head with 2 spindles in Y-direction •Grooving saw D=100 mm (X-direction) •Stop cylinder for workpiece positioning •Workpiece clamping system •Workpiece length: 3050 mm •Workpiece thickness: 12-60 mm Machine operation •WOODWOP 7 FOR MACHINE •Milling motor with frequency inverter 5kW (ETP) Documentation •Selected language: Polish, English, German •Documentation on data carrier, paper documentation General information Ljdpfxjw U Ty Se Abcehd •Year of manufacture: 2021 •Control: POWERCONTROL with POWERTOUCH system •CE-marked •Status: Ready for operation / can be demonstrated •Available in stock

Condition: used, - suitable for HARBS or similar, Lhodpfslf Ndaex Abcod - d = 30 mm, - D = approx. 125 mm, - B = 50 mm, - keyway = 8 mm, - 9 pieces per set.

Condition: new, 130 kg Lodpov Iztcsfx Abcohd height min. 670 mm height max. 920 mm length min. 450 mm length max. 1.300 mm Wheel width 480 mm weight ca. 36 kg Woodstar SRB 130 mobile scissor roller conveyor for flexible use in front of or behind processing machines, with a robust, height-adjustable steel frame and galvanized steel rollers. Multiple roller conveyors or roller tracks can be easily connected to each other using two hooks.

Condition: used, length 2.000 mm Ledpot Iwx Rsfx Abcjhd width 500 mm height 970 mm

Condition: used, - Spacer rings, Lodpfslf Nckox Abcohd - Distance rings, - Inner diameter: 35 mm, - Outer diameter: 50 mm, - Groove: 10 mm, - Each set includes the following thicknesses: 40, 40, 20, 20, 10, 10, 5 mm, - Available sets: 3, - Image similar, Price per set: €35.00 + VAT.

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Lodpsuzn Nnsfx Abcshd Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: excellent (used), Feed table for a four-sided planer TECHNICAL SPECIFICATIONS: max. workpiece length 5000 mm min. workpiece length 400 mm max. workpiece width 330 mm max. element thickness 120 mm roller motor power 1.1 kW 1.5 kW chain motor power adjustable feed on the inverter 7 guide chains 13 steel feed rollers roll diameter 90 mm height of the rollers from the base 820 mm pneumatic pressure height of the rollers from the base 820 mm dimensions (length / width / height) 600/240/155 cm Lodpfx Aehtq Amobcehd weight ~ 1500 kg

Year of construction: 2000, condition: repair required (used), Feed transport equipment consisting of 1 piece conveyor belt and 1 piece roller conveyor ideal for (A) before planing machine with much hand saw Lhodpfxodi Nyke Abcsd (B) before cutting band saw or other saw (C) at the inlet before other machines in the state as is and without electrical control

Condition: good (used), BREVETTATO 3-roller feed Specification: • condition - used • manufacturer - BREVETTATO • 3 pulling rollers with dimensions 120x48 • forward/reverse rotation • speed regulation with a switch and on the gears • motor powered by 380V current (3 phases) • 4 working speeds in the range from 3.0 to 23.0 m/min • weight approx. 70 kg Lhsdpsvrzl Tofx Abcod Additional information: • good technical condition • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT and transport costs

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Angle feed wolf Laska WW 130 G Model WW 130 G Throat diameter: 130 mm Power supply: 400V 50Hz Power: 17 kW Lhedpfx Ajvz H Rmebcsd Year of production 1998 Set of knives and sieves

Condition: used, functionality: fully functional, Year of construction: 2017, 1x Mixer Holding Tank / Storage Container - Custom-made from V4A stainless steel - Used in our pellet production line as a buffer tank for herbal mixtures in powder form. It features a feed line (right side) from the mixer and a discharge on the left side to the intermediate storage tank. At the inlet from the mixer, there is also an option to divert the mixture into big bags prior to storage. - Material feed via electric auger (top) Lhjdpextmxwefx Abcsd - Material discharge via electric auger (angled) Filling capacity naturally varies depending on the type and volume of the mixture. With our mixtures, it held approximately 2 x 400 kg. All motors and sensors are fully functional.

Condition: excellent (used), Bandsaw with feed MEBER SR - after the technical review - in good condition - Italian production Ledpfjfwl Uasx Abcohd TECHNICAL PARAMETERS: 4 kW main engine wheel diameter 800 mm cutting height 420 mm maximum width of the cut material 780 mm cutting width at the ruler of 575 mm cutting width with rolls 195 mm maximum width of the material cut with a feed 355 mm cutting band width max 40 mm feed speed adjustable on the inverter feed speed range 0-12.5 m / min height of the feed roller 140 mm pneumatic feed pressure upper and lower belt guides 0.75 kW feed motor stub diameter 100 mm dimensions (length / width / height) 260 x 165 x 115 cm weight 700 kg

Condition: good (used), For sale: Colchester Triumph 2500 lathe, fully functional and ready for operation. The lathe is equipped with a Fagor digital readout and has a coolant pump installed beneath the chip tray. Technical data: Center height: 167 mm, Distance between centers: 635 mm, Swing over bed: 330 mm, Swing over cross slide: 210 mm, Spindle bore: 40 mm, Drive power: 2.2 kW. The sale includes 15 tool holders, a live center, and machine feet. Loading is problematic. Lhjdpjxw N I Nofx Abcjd

Condition: excellent (used), functionality: fully functional, power: 7.5 kW (10.20 HP), The pumps are suitable for supplying grinding oil for tool production. The pumps were in use up until recently on a central system. There are 2 units in stock. Lhjdpfx Asylqbujbced

Condition: excellent (used), functionality: fully functional, Steel Feed Hopper Consists of: - Main structure: overall dimensions: 3600 x 3600 x 2800 mm working width: 1200 mm - Roller system: roller length: 1600 mm - Conveyor: equipped with an inclined belt conveyor The steel feed hopper is a robust unit designed for buffering and controlled feeding of raw material in industrial process lines. With its large capacity and 1200 mm working width, the hopper ensures smooth production flow, eliminating downtime caused by uneven material supply. The integrated inclined belt conveyor enables efficient material transfer to subsequent processing stages, while the 1600 mm roller system supports precise guidance of the product stream. Ljdpfeykmkvsx Abcjhd

Condition: like new (used), Chain feed table, used for feeding and linear transportation of roll goods or log goods. Forward/reverse run (reversing circuit) integrated, end positions are queried via roller limit switches. Feeding length: 2200mm Feeding height: 950mm (adjustable) Drive power: 0.18kW (Getriebebau Nord) Condition: slight paint wear, otherwise as good as new Ledpfx Abotw Sm Nocehd

Condition: refurbished (used), Year of construction: 2026, (3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC photos of the last finished machine, for reference only complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to customer needs. Machine refurbished, grinding test in our warehouse is possible, CE certification, manuals, 12 months warranty also available Machines can be inspected in our warehouse in Gussago BS Google Map HERE INFO? . Machine Tools - Machine Tools Gussago (BS) - Italy Tel:  Centerless grinding is a procedure for grinding cylindrical bodies and is used for the mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, tips, etc. During centerless plunge grinding (plunge grinding), the workpiece is ground in one pass thanks to the translation of the wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the workpiece to work which is given to them with the aid of a tool. Through-feed grinding or also through grinding and longitudinal grinding: parts to be machined proceed uninterruptedly with axial advancement through the grinding gap. Grinding wheel width: 500 Grinding wheel diameter: 610 Lsdpfx Abogmf Rnscohd CNC: 5 axis (new)

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1000042683, feed length Y-axis: 1,300 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 63 A, total width: 1,950 mm, total length: 1,950 mm, total height: 3,100 mm, The Brema Vektor 15 is a CNC machining center with a vertical column, designed for processing wood-based panels. The machine can perform drilling, milling, and engraving using a pantograph. It allows for machining on all 4 edges of the panel and profiling thanks to its patented panel transportation system. The machine is equipped with: - A head with independent vertical spindles: 21 (7 on X + 14 on Y) - Horizontal spindles (2L + 2R on X) - Main vertical spindle (milling unit) 7.5kW - Automatic revolver-type tool change system, 10 positions Available revolver units: Lhsdpfxex Hfh Tj Abcod 1. Saw on X 2. Saw on Y 3. Drilling on Y (1R + 1L) 4. Hinge drilling (1x35mm + 2x5mm) 5. Milling 6. Milling 7. Milling

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, working width 300mm working height 140mm feeding rate 200m/min spindles speed 6000 RPM spindles diameter 50mm Lhjdpovu Sayjfx Abcjd spindles set: 1. bottom - 22kW 2. top - 22kW 3. right - 18,5kW 4. left - 18,5kW 5. right - 18,5kW 6. left - 22kW 7. top - 22kW 8. bottom - 22kW 9. top - 22kW 10. bottom - 22kW 11. bottom - 22kW Without feeder: 125 000€

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Leadscrew & feed shaft lathe DREHMA DA 410x1500 / New / Demonstration machine - CE marking Lodpfxoymcv He Abcohd - Digital readout - Swing over bed: 410 mm - Swing over cross slide: 225 mm - Swing in gap: 580 mm - Turning length: 1500 mm - Spindle bore: 52 mm - Speed range / gearbox: 45 - 1800 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric / imperial etc. - Tailstock MT 4 - Centralized lubrication - Motor power: 3.5 kW - Fixed & travelling steady rests - Multifix toolpost with inserts - 3-jaw chuck 200 mm - 4-jaw chuck 250 mm - Faceplate - Chuck guard - Coolant system - Work lamp - Live center & drill chuck - Machine feet - Documentation Dimensions LxWxH: 1.5 x 1 x 1.6 meters / Weight: 1850 kg Errors and omissions excepted.