Used Lamella for sale (100)

Condition: used, Year of construction: 2014, functionality: fully functional, Lamella press 13 m x 1.6 m x 240 with 2 decks Bwodpjxmvvlofx Abcoh

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 2962 Ident:171526, Multi-Sided Wide Planer with Beveling Unit LEDINEK SUPERLES 400 4V+4F MACHINE DATA Machine type: Multi-Sided Wide Planer with Beveling Unit, Right-Hand Version Version: Manufacturer: LEDINEK Year of manufacture: 1997 Model: SUPERLES 400 4V+4F Machine No.: 2962 Condition: Used, Ready for use DESCRIPTION SUPERLES 400 4V+4F Multi-Sided Wide Planer with Beveling Unit Heavy-duty, universally applicable planer with an innovative quick-change tool system. The machine is suitable for demanding machining of KVH, glulam lamellas, heavy beams, and glued laminated timber. The machine has 4 work spindles and 4 beveling units, arranged as follows: 1. Horizontal at the bottom 2. Horizontal at the top 3./4. Vertical left/right (opposite) 5./6. Chamfer top left/right (opposite) 7th/8th chamfer bottom left/right (opposite) Tools: Horizontal shaft speed: 3,000 rpm Vertical spindle speed: 4,000 rpm Chamfer spindle speed: 9,000 rpm Tool diameters: Horizontal shafts: 205 mm Vertical heads: 160 – 300 mm Chamfer cutter: Ø 180 / 45° x 10 mm Tools: Bodpowhvzyofx Abcowh Two vertical shafts and two planer and thickness shafts are still available. Extraction nozzle diameter: Dressing shaft: 200 mm Thickness shaft: 250 mm Vertical shafts: 2 × 200 mm Bevel cutters: 4 × 80 mm Extraction speed: min. 30 m/sec General: Air pressure: 6 bar Weight: 14,000 kg Installed power: 140 kW with control panel and control cabinet

Condition: new, Year of construction: 2024, A versatile saw for cutting wood for veneers, lamellas and the like. Height of workpieces up to 400 mm. The powerful feed rate gives a very high performance. The R800 is a solid saw. In the R800, it is possible to use tapes of different widths. It is equipped with a mechanical feed of the workpiece. It is designed so as to easily cope with work in conditions of high load of the main engine and high processing speed (up to 30 m / min). It is possible to use a tape with a width of 80mm. The sturdy frame of the machine is made of welded sheet steel. Massive flywheels made of cast iron ensure maximum efficiency, and the wheels are mounted on dustproof ball bearings. The lower part of the saw blade is specially reinforced, which allows a higher degree of inertia (inertia) to be achieved without excessive starting and braking loads. To further improve the evenness of work, the guides are specially ground so that they remain carefully balanced. Diameter of saw wheels 800 mm Max. cutting height 400 mm Max.cutting width 770 mm Height of table from 960 mm Table size 1060 x 800 mm Max. and min. blade length 5530/5380 mm Width of blade 80 x 0,8 mm Motor power 11 (HP 15) kW R.P.M. of wheels 680 R.P. M. Bwsdpfx Abegp I U Nocjh Sawblade speed 28,5 mt./sec. Sawdust hoods 1 Ø 100 mm. 2 Ø 120 mm. Required capacity for extraction system (for air speed 20 mt./sec.) 3840 m3/h Compressed air consumption 60 Lt./min. Working pressure of pneumatic brake 6 - 8 bar Net weight 880 kg RVP210 Height of feeding roller 50 mm Feeding roller diameter 200 nm Standard feeding rollers 2 nr. Height of standard rollers fence 300 mm Length of Rollers fence 600 mm Rollers fence tilt 0-45° Max. Roller-blade clearance 200 mt/sec Max. fence-blade clearance 420 mm Motor power 0,37 kW Variable feed speed rate 0-30 mt./min Compressed air consumption 30 Lt/min. Working pressure 3 - 6 bar Net weight 180 Kg

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, cutting height (max.): 80 mm, overall weight: 1,500 kg, saw blade diameter: 280 mm, input voltage: 400 V, Powerful lamella saw from Swedish production. Equipped with a 30 kW motor. Additional saw blades and spacer rings are included in the scope of delivery. Very good condition, beam width 200 mm. Transport across Europe can be organized at a good price. Bjdexg N Emspfx Abcowh

Condition: good (used), Year of construction: 1995, Longitudinal circular saw, Swiss manufacturer, with max. 5.1 m cutting length with lamella carrier max. cutting width 450 mm max. cutting height 160 mm Bsdswugihspfx Abcewh hydraulic feed motor

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 210 mm, cutting width (max.): 2,120 mm, cutting length (max.): 9,200 mm, saw drive: 15,000 W, total length: 11,000 mm, height adjustment type: electric, overall weight: 2,500 kg, saw blade diameter: 550 mm, JRIMAC rip saw "TOP" - NEW - - Cutting length 2200 - 9200 mm - Cutting width 420 - 2120 mm - Cutting direction left - right (right - left on request) - Cutting height max. 210 mm with high-quality saw blade Ø 620 mm. - Precise and clean cut due to strong, self-supporting welded construction of the machine stand. - Carriage guidance via linear guides, with ball-bearing mounted, maintenance-free rollers. - Safety beam mounted above the machine table with 6 mm thick lamella protection. - Extraction connection Ø 160 mm installed at table height at top right and bottom left ready for connection. - Flexible and efficient working thanks to 250 mm opening of the slat guard above the top edge of the table. - Infinitely variable, frequency-controlled, powerful feed of the carriage. - The maximum feed speed can be adjusted. - Automatic stepless saw blade height adjustment. - Infinitely variable width stop adjustment via several operating levers. Bwodpfx Aegk Nvnsbceh - Electronic positioning control. - JRIMAC" saw blade quick clamping system allows quick saw blade changes. - Cut release as standard (small mobile foot pedal). - Front table supports made of wood, plastic or Pertinax coating. - High work safety. - Only high-quality components are used and installed. - The electrical control cabinet is easily accessible at the front of the machine. - The machine electrics are designed for 230/400 volts, 50 Hz. - BG dust-tested - EC type-tested in accordance with Directive 2006/42/EC - Forcibly guided splitting wedge - Processing of more than 12 different materials possible - Reliable spare parts and customer service

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1791, MATEC 30HV/NC X = 2,000 mm Y = 825 mm Z = 800 mm / horizontal Z = 675 mm / vertical - 1-axis CNC swivel head Swivel radius 300 mm, swivel angle max. +/- 105 degrees Direct path measuring system +/-3, optionally continuous or indexed with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Electronic handwheel (portable) - Remote diagnosis / remote maintenance - Tool magazine with 48 positions - Additional tool magazine with 216 positions Fixed tool magazine for loading the internal tool changer of a machine tool. Including: - Linear and rotary axes with drives - Controllers and sensors - Gripper for tool holder SK40 - Sheet steel enclosure - 6 tool levels for storing up to 216 tools with SK40 holders D = 80 mm or D = 160 mm if adjacent slots are free, comprising: 40 pcs. with L = 430 mm 64 pcs. with L = 260 mm Bwjdpfx Aoxg D Atjbcjh 112 pcs. with L = 160 mm Maximum tool weight: 10 kg - Tool loading and unloading via tool flap - Transfer to machine via double gripper - Tool data entry via the machine operating panel, selection of tool positions via the operating panel of the additional magazine - Option: Operating panel for tool data entry at additional magazine - Additional price for motor spindle 9,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar - Internal coolant supply 40 bar - Compressed air to external nozzles - Internal compressed air through tool - Rotoclear - Automatic safety doors - HOWIMAT CNC 220.2/TMI-50 rotary table 1-axis precision indexing table with direct drive Indexing accuracy deviation max. +/- 10 seconds Radial/axial runout deviation max. +/- 0.003 mm - Single rotary union for rotary table or counter bearing - Zero-point clamping system integrated in the machine table, without draw studs and cover. - Tool breakage monitoring - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system X-, Y-, Z-axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Installation elements

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) Bwsdpfxoxg Dhco Abcjh 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0728, X = 5,000 mm Y = 1,025 mm Z = 1,100 mm / Horizontal Z = 1,000 mm / Vertical - Continuously adjustable NC swivel head, +/- 105 degrees, as a CNC axis for horizontal and vertical machining, indexing accuracy +/- 5 seconds - Heidenhain iTNC530 controller, hard disk with approx. 21 gigabytes of free space - HSK100 motor spindle, speed range 20-8,000 rpm, drive power 44 kW, torque 350 Nm - NC rotary table SKH 4/630 Horizontal faceplate Faceplate diameter: 630 mm Standard height: 300 mm Indexing accuracy: +/- 12" Max. load: 900 kg Max. tangential torque at 63 bar: 2400 Nm Includes AC motor with integrated rotational measuring system and hydraulic clamping, as well as an additional CNC axis - NC rotary table SKH-NC 9/1450 Horizontal faceplate Faceplate diameter: 1450 mm Indexing accuracy: +/- 12" Without direct measuring system Max. load: 5,000 kg Bodpfx Abexgnfxjcewh Max. tangential torque with clamping: 16,000 Nm Includes AC motor with integrated rotational measuring system and hydraulic clamping, as well as an additional CNC axis Special enclosure for rotary table diameter 1450 mm included Swing circle diameter: 1500 mm No turning operation possible! - 60 tool stations - Fully enclosed working area with roof - Bellows with steel lamellae - Direct measuring system for NC rotary table, indexing accuracy +/- 5 degrees - Direct linear measuring system for X, Y, Z axes - Chip conveyor - Rinsing gun - Centralized oil lubrication - Working area lighting, 6-fold - Mounting elements - 3D wireless measuring probe - Tool probing system for measuring and checking cutting tools in the machine, TT140 - Unilok ESM 130 zero-point clamping system 36 units integrated in the machine table 16 units embedded in the rotary table faceplate (diameter 1450 mm) 4 units embedded in the rotary table faceplate (diameter 630 mm)

Year of construction: 1972, condition: not inspected (used), machine/vehicle number: SW3a DP. U. AP. 40923 , sheet shear : A used sheet shear (swinging cut) from the manufacturer Wieger. At the foil or sheet shearing , the cutting gap does not need to be adjusted for cutting different sheet thicknesses. Max. Cutting Power = 10 mm Model or Type: SW3a DP. U. AP. 40923 (with lamellae working clutch with brake, electropneumatically actuated) Bsdped Eg Ngsfx Abcjwh Construction year: 1972 Condition: used (good)

Year of construction: 2022, condition: ready for operation (used), A Ruez cooling lubricant system as good as new is available. Capacity: 34720l, filling volume: 32710l, usable volume: 22020l + clean tank volume: 6000l. Level indicator: OWE 2C, inlet/distributor: screen basket, machine dimensions X/Y/Z: approx. 7400mm/2800mm/6000mm. Including integrated sludge scraper and chip conveyor. Including two-part Ruez lamella separator, Ruez safety trough, clean tank, Ruez magnetic roller filter, chip cart superstructure. Without belt filter and sediment system. Documentation available. On-site inspection is possible. Bodjudm Dtjpfx Abcewh

Year of construction: 2013, condition: used, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Bsdpfx Aovwfhisbcswh

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, MAKA BC 150t compakt, second-hand machine 5-axis CNC machining center for machining aluminium and plastic. Stand portal in 4-column design (bridge center), 2 x unit carrier Technical data: Working ranges in 5-axis operation, with tool Ø 160 / length 160 mm: 2 x each: Y-axis: 1,500 mm X-axis: 2,500 mm Z-axis: 650 mm / with 180 mm fixture height Couplable tables, for processing large components. Extended extension stroke, for loading and unloading. Rapid traverse speed: X-/Y-/Z-axis 60 m/min. Acceleration: 3 m/sec² Rotation axis 540° / swivel axis 196° (+/- 98°) Table design: - 2 x aluminum flat table, size 2,500 x 1,500 mm - M10 threaded bushes and centering bolts in the table top. - 3 x vacuum clamping circuit per table. - 3 x pneumatic clamping circuit per table. Milling unit: - 2 x universal unit for 5-axis milling with 50° inclined head, HSF F63 tool holder, max. power 12.5 kW (S1), speed infinitely variable up to 24,000 rpm, water-cooled milling spindle. - 1 NC height-adjustable chip catcher system per milling unit, with lamella curtain. Tool changer: - 2 x rotary table tool magazine with 20 places. Bsdpfjtq Hkrsx Abcewh Control system: - 1 x Siemens SINUMERIK 840D SL machine control unit - 1 x Siemens OP 19 PCU control panel with 19" display, full keypad, membrane switch. - 1 x additional Siemens HT 8 portable manual control panel with 7.5" touchscreen, version with handwheel. Occupational safety: - 1 x soundproof cabin. - 2 automatic loading gates, with vision panels. - The loading and unloading area is protected by light barriers and bumpers on the tables. Measuring probe: - 2 x 3D radio measuring probes, with HSK F63 tool holder, for changing from the tool magazine. Minimum quantity lubrication: - 2 pieces minimum quantity lubrication - 2 flushing nozzles per milling unit, each individually controllable via M function. Table blow-off system: - 2 x Airknife table blow-off system, for blowing off the tables during the exit from the machining area. Limited in coupled operation. The machine is assembled and can be inspected in 89568 Hermaringen.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: Kühlmitteleinrichtung, Coolant system for cooling lubricant RUEZ coolant tank with integrated sludge scraper, chip conveyor - Coolant cleaning system for cooling lubricant - Including two-part RUEZ lamella separator. - Including RUEZ safety sump in accordance with WHG with 100% collection space - Including clean tank & RUEZ magnetic roller filter - Year of construction 2022, unused & as good as new - RAL 7035 light gray - Superstructure for chip cart - No belt filter, sediment system - Available immediately - Price VB Description Coolant system: - Capacity approx. 34,720l - Filling volume approx. 32,710l - Useful volume approx. 22,020l + approx. 6,017l (clean tank) - L/W/H approx. 7,341mm/2,800mm/2,000mm - Tank walls 4mm/S235JRG2 - Walk-on, split tank cover - Tank supports approx. 100mm - Level indicator OWE 2/C as leakage protection - Inlet/distributor with strainer basket - 2 supply pumps - Type: NB100-25/4-15kW - 2000 l/min at 2.1 bar Bwedpfx Abjtwpttocjh - Pipe - DN150/125 - Return line - DN 100 - PN 16 - RUEZ float switch RB 200 - 3 / 1900 - Level indicator FTL31-CA4M2AAWBJ as overfill protection (clean tank) - RUEZ control unit - Siemens TIA - SPS: SIMATIC S7-1200, CPU 1215C - Visualization: KTP700 control panel - Indicator light red-yellow-green

Condition: used, functionality: fully functional, 0,75 kW Spraying device Lamella star 150/70/25 mm sisal/leather/plastic fabric Lamellar star 150/70/25 mm sisal/plastic fabric Flanges 70 mm reduced to 11 mm (2 pcs.) Metal Bsdpfx Ajigaf Robcewh Control panel top 4 motors à 0,18 kW for brushes

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Bwodpfx Aoxhg Ibjbcsh Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: used, - used spiral roller conveyor Bwjdpfx Aew Ag Dzsbcjh - 2 pcs separating lamellas - 6,000 mm length - 800 mm roller width - approx. 1,000 mm overall width - approx. 150 mm roller diameter - approx. 430 mm roller pitch - SEW feed gear motor

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: I05BN1159, cooling capacity: 55 kW (74.78 HP), The ENR series consists of air-cooled chillers for industrial use, designed for outdoor installation. The ENR 055 features axial fans, scroll compressors, condensers with finned aluminum lamellae, and a self-cleaning coaxial evaporator for maximum operational reliability. It comes with an internal pump, tank, and uses refrigerant R410A. Cooling capacity is 55 kW at 7/12°C and 35°C ambient temperature. The unit is sold with a new leak test certificate. Bwodpfx Absw Sv Iyeceh

Condition: used, Price on request. Comprising: Minda grading line for stack and lamella dimensions Stack width: max. 1,200 mm Stack height: max. 1,200 mm Stack length: 2,000–5,000 mm Stack weight: max. 3 t Lamella width: 80–260 mm Lamella thickness: 23–80 mm (typically 46 mm in the rack) Cross-section: max. 80 x 260 mm = 208 cm² Performance of vacuum stacking with lifting column: Bwedpswwg Amefx Abcoh Section I: 3 layers/min Section II: 2 layers/min Finger jointing by Grecon Destacking, planing line and cross transfer platforms by Minda

Condition: used, Year of construction: 1995, functionality: limited functionality, machine/vehicle number: 6017, total length: 13,500 mm, total height: 2,090 mm, operating pressure: 250 bar, stroke length: 600 mm, Price on request. For sale: 3 double-sided, hydraulic vertical solid wood presses from Minda. We are offering three high-quality solid wood presses manufactured by Minda for sale. The presses can be purchased and operated individually or as a complete package. Technical Specifications: - Design: Double-sided, hydraulic vertical press - Number of press chambers per unit: 2 - Application: Pressing lamella packages into beams or glulam according to DIN 1052 - Pressure monitoring: Automatic - Pressure shoe clearance: 800 mm Special feature: The press force of the first pressure shoe can be individually adjusted – ideal for the production of glulam beams of various lengths. The machines are in good condition. Availability: Immediately Sale: Individual units or as a complete package Location: Allendorf Technical Data: - Max. pressing length: 13,500 mm - Max. lamella width: 320 mm (chamber width 395 mm) - Min. lamella width: 85 mm - Chamber height: approx. 2,090 mm (clear opening) - Pressing height: max. 2,000 mm / min. 1,550 mm - Specific press force: 1–12 kp/cm² - Vertical cylinder stroke: max. 600 mm - Horizontal pressing force per side pressure unit: approx. 8 Mp Bwedpfxowwgz Ao Abcjh - Horizontal cylinder stroke: max. 312 mm - Infeed height of roller conveyor: approx. 920 mm - Feed rate: 15 m/min - Vertical pressure point spacing: 400 mm - Horizontal pressure point spacing: 800 mm (1,600 mm) Operating pressure: (Fill pressure) min. 50 bar (Pressing pressure) max. 250 bar

Condition: like new (used), functionality: fully functional, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, saw blade diameter: 305 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, total length: 3,100 mm, total width: 3,100 mm, overall weight: 3,000 kg, power: 7 kW (9.52 HP), space requirement length: 3,100 mm, space requirement width: 3,100 mm, Equipment: rotational speed infinitely variable, scorer, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Key Technical Data & Equipment: - Rip saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatic lowering during return) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Score saw blade adjustable externally (without opening the hood) - Safety hood locking with lamella curtain SZ 5008 - 3-step cutting height adjustment LA 4143 - 6 cut-out sections in the pressure beam for residual cuts down to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (switchable) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: Bwedpswrn Efofx Abceh - Angle pressure device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack-and-pinion guidance - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interfaces - Network capable (LAN/WLAN), remote maintenance via internet (TeamViewer, Remote Desktop) - USB printing function - Multilingual dialog programming - 15" flat screen, multifunction keyboard on a swiveling control console - Graphic display of cutting plans and processes Software / Programs: - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette or online (optional) - Manual, automatic & special operation modes (e.g. grooving, veneered parts) Additional Equipment: - Angle fence table HP 5085: 1,720 x 800 mm | Pertinax overlay - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered Reliability in Continuous Operation: This machine is in use worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g. Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and durability. Warranty: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electronic supply parts and wear parts.) 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available upon request.

Condition: like new (used), functionality: fully functional, Dowel Hole Drilling and Inserting Machine SCHEER BS 5102-V The BS 5102-V is a powerful, electronically controlled machine designed for precise and efficient face-end drilling and accurate insertion of wooden dowels. It is ideally suited for industrial wood processing—especially in furniture and carcass production. Condition & Service: Condition: As new (completely overhauled & newly painted) Functionality: Fully operational Bsdpfx Aeunvg Tsbcswh Warranty: 12 months CE compliant / Dust-tested Main Technical Data & Features: Workpiece width: min. 60 mm / max. 1200 mm (Pendulum operation: max. 600 mm) Workpiece thickness: 15 – 60 mm Drilling depth: max. 45 mm Vertical stroke of the support: 7.5 – 50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000 – 18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Glue system: 1:1 diaphragm pump, max. 7 bar Glue container: spiral conveyor, 3.5 liter capacity Extraction connection: Ø 80 mm | Extraction airflow: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angular clamping Power supply: 400 V, 50 Hz Machine Construction & Operator Comfort: Controlled X-axis with machine frame as workpiece support X-support with linear guide and rack-and-pinion drive Servo drive for feed system Clamping portal with 4 adjustable clamping cylinders—controllable in 2 groups Stop rulers: left, right, and center on the table Drilling depth and dowel projection are adjustable directly on the support Offcut Unit & Safety Systems: Safety hood locking Lamella safety curtain Integrated extraction channels Control & Operation: PC with Siemens PLC controller User interface: WP-Studio—dialog-oriented programming Operating system: Windows 10 Display: 17" color monitor Separate workpiece programs for left & right operating sides (mirrored possible) Glue quantity can be individually defined per program Network capable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue units Electronic glue monitoring: ensures controlled glue flow Additional drilling unit for surface-side drilling: • Drilling motor: 1.5 kW at 18,000 rpm • Drill feed: pneumatic • Drill stroke: max. 25 mm • Depth limit: via spindle & SIKO display • Drill distance from reference edge: 5 – 35 mm • Holder: M10 external, max. Ø 35 mm • Workpiece length: min. 70 / 90 mm Warranty & Reliability: We are convinced of the stability and manufacturing quality of our machines—that’s why you receive a 7-year warranty on the machine construction, especially on the supporting structure and guide mechanism. Excluded are electrical supply components as well as normal wear parts. Additionally, we provide a 1-year warranty on the complete machine (including control, hydraulics, pneumatics, etc.). Conclusion: This machine combines state-of-the-art control technology, high manufacturing quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient for continuous operation. 📞 Contact us for an individual offer or to schedule a demonstration. Available from stock. Delivery, commissioning, and training available as options.

Condition: as good as new (ex-display), Pneumatically controlled edge banding machine with 7 units: Jointing cutter unit including AIGNER diamond jointing cutter heads, with DIA quick-change knife system Konstantin and controlled edge air blast nozzle behind the 2nd jointing cutter head. End trimming saw unit with extraction device, including two pneumatically swiveling saw blades, adjustable and programmable from the control panel. Radius milling unit with pneumatic 2-position revolver, adjustable and programmable from the control panel. Includes 2 quick-change motors with R=1mm radius cutters and 2 quick-change motors with R=2mm radius cutters. Corner rounding unit (copy milling unit) with insert table function and pneumatic 2-position revolver, adjustable and programmable from the control panel. The entire unit can be pneumatically engaged/disengaged from the control panel. Includes 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm. MULTI-radius scraper unit, radius 1mm and radius 2mm, with pneumatic 4-position revolver. The unit can also be pneumatically engaged/disengaged. Includes extraction system with chip collection box for scraper shavings. Flat scraper unit with four-way usable scraper knives. The entire unit can be pneumatically engaged/disengaged. Removed glue residues are extracted. Buffing unit with two ORIGINAL Riepe cloth-sisal-lamella wheels, arranged at an angle, for cleaning and polishing. General features: - Infeed fence with handwheel adjustment (jointing thickness adjustment) and digital readout - Upper pressure beam with digital workpiece thickness display and handwheel adjustment - Pressure zone with digital display and handwheel adjustment - High-gloss package: roller tracing for radius milling unit, radius scraper unit, and flat scraper unit - Large panoramic noise and safety enclosure for all units and the glue tank - Interior lighting - Operator panel with 15'' touchscreen and intuitive operation - USB port for data backup and transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tank with quick-change system and energy-saving standby mode - Glue roller with feed auger for long and tall workpieces (especially for PUR adhesive) - Additional quick-change glue tank - Pressure zone with 3 pressure rollers, with the first roller motor-driven - Heavy-duty roller edge shear for edges up to 54 x 3mm - Original RIEPE spray system - Before the jointing cutter unit: LPZ II separating agent - Before the saw unit: LP 289/99 cooling and antistatic agent - Before the milling unit: NFLY lubricant - Before the buffing unit: LP 193/63 cleaning agent Bjdpfew Rd Ixjx Abcswh Technical data: Edge thickness: 0.4 - 3 mm Min. panel width (without corner rounding unit): 80 mm Min. panel width (with corner rounding unit): 130 mm Min. panel length (without corner rounding unit): 100 mm Min. panel length (with corner rounding unit): 300 mm Min. panel thickness: 10 mm Max. panel thickness: 50 mm Feed speed: 11 m/min Extraction ports: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm Bodpfx Abjwz Nzmecewh - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Condition: used, functionality: fully functional, pressing force: 200 t, table width: 300 mm, cutting height with scoring (max.): 100 mm, milling spindle length: 250 mm, Equipment: Bsdpfewz H Anox Abcowh 1 GRECON feed transfer with accumulation of 4 to 5 cleaned lamellas of different lengths for finger-jointing 1 GRECON double finger-jointer for deep teeth (for glulam beam production) 1 180° transfer with two-component gluing system 1 GRECON finger-jointing press 1 CNC-controlled cross-cut saw 1 outfeed table