Used Laminating Machine for sale (84,030)

Condition: used, Year of construction: 2006, Laminating machine TPM Katana 106 Year of manufacture 2006, approx. 36,000 operating hours For thermal and wet lamination Technical details and equipment: Max. sheet format: 106 x 165 cm Min. sheet format: 44 x 63 cm Feeder: Mabeg Chodpfx Aexdhq Aeddjf Extras: De-powdering and brushing device Laminating unit with drying drum and separate laminating calender. Large counterpressure roller for increased laminating pressure, 2-stage motor hydraulics Hot water heated cylinders (2 separate temperature control devices) 2-stage air jet drying (separately controllable) Sheet separator with flying knife (cross cutter) and short cut for OPP film Stacker with sheet deformation and stop rollers Central control and operation (Siemens control system / with Profibus) The system has been regularly serviced by the manufacturer and is fully functional.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, Foliant Gemini 400G Automatic Laminator Fully Automatic Digital Print Laminating Machine. Deep Pile Auto Feeder - 300mm Paper stack capacity Max sheet size B3 (380mm wide) Max production speed 15 m/min ( 1,800 x SRA3 sheets per hour) Built-in compressor for high-pressure laminating rollers. Auto-control for miss-sheet detection and quality control. Large roll film capacity. (up to 3,000 m) In-line sheet separation. Csdpfxsvrd E As Addehf Delivery into a paper jogger 220/240 volt - 50Hz

Condition: excellent (used), Year of construction: 2004, operating hours: 38,000 h, functionality: fully functional, BILLHOFER AUTOMATIC LAMINATING MACHINE • TYPE : EK 104-50 / M • SIZE : 104 x 142 • YEAR : 2004 • WORK : 38.000 Hours • LOCATION : Istanbul DETAILS: Chsdow Ta I Hopfx Addjf Automatic Feeder A-20-P (Double Sheet Control) Seperator Laminated Delivery Table Electrical Cabinets Very Good Condition Available Immediately

Condition: good (used), Laminating machine Matrix MX 530 Machine in very good condition, comes from a small digital printing house. The set with the machine includes foil and user manual. Description: MATRIX is a semi-automatic laminating machine for hot laminating with a built-in sheet separator. The device is designed for laminating digital or offset prints in low and medium circulation. It can be operated by one operator at a speed of up to 10 m / min. Additional advantages are quiet operation and a small area it occupies in the printing house. Key features of the device: Semi-automatic mode (the operator feeds the sheets onto the table, the next cycle is automatic) Cedpfx Aevkt N Ioddjhf Multi-level, adjustable „anti-curling” roller system straightening the sheets Built-in, automatic sheet separator The device is suitable for both digital and offset printing Quick format changes and easy replacement of film rolls (3000m rolls) Device operation cycle: The programmer allows you to adjust the speed, overlap length and temperature The operator feeds the sheets manually The sheets are automatically taken by the rollers according to the set overlap Ready, separated sheets are delivered to the receiving tray Maximum film width 500 mm Maximum paper width 530 mm Maximum paper length 1200 mm Minimum paper format 200 x 300 mm Laminating speed up to 10 meters per minute Front table dimensions 668 x 542mm Paper weight 115-350 g/m2 Temperature 80 – 130 °C Warm-up time 10-15 minutes Dimensions 84x210x131.5cm Power consumption 1.5-2kW Power supply 230V,50Hz Weight with base 194/260kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, In Production SWEDEN; year: 1998 Size max: 1400×1100 mm Min size: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Thickness: 0.6-10mm Feeder height: 500 mm (bottom), 300 mm (top) Production depending on the materials: up to 1500 sheets/hour, The machine was technically sound at the time of dismantling. Cleaned. Dismantled. Cedpfx Adsv Ta Txsdshf

Condition: used, Year of construction: 2013, • Web width: 1300 mm • Max mechanical speed: 400 m/min (depending on materials and process) • Substrate types: Film, foil, paper, and combinations thereof Main Components and Features Automatic web tension control across all unwinds and rewinds Motorized adjustment for nip pressure and web alignment Touchscreen HMI for process control and recipe management Modular design for easy access and maintenance Web inspection and defect detection (if installed) Corona Treatment Unit Nordmeccanica Solventless Mixing Unit Continuous, inline mixing of two-component adhesive system Equipped with: Precision gear pumps for both A and B components Automatic ratio control and monitoring Pumps for continuous filling to ensure uninterrupted production Easy-access design for cleaning and maintenance Drying Tunnel Equipped with 2 thermal oil heating batteries Provide stable and efficient heat transfer Maintain consistent tunnel temperature, essential for proper adhesive drying Chsdpfjxg Hqaex Addof Integrated with 2 modulating valves Automatically adjust the thermal oil flow Enable fine control of tunnel temperature for different lamination applications LEL (Lower Explosive Limit) Monitoring System Zellweger LEL sensor. Continuously monitors solvent vapor concentration

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, LAMINA 1116 FAS+ Machine in production, can be inspected in Bucharest, Romania. Cjdpfxowc Trfj Addjhf Model/ Width/ Length/ Width/ Length/ Weight 1116 FL+/ 1100 mm (43”)/ 1600 mm (63”)/ 2150 mm (85”)/ 6800 mm (267”)/ 2500 kg (5510 lbs).

Condition: good (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, TAULER PRINTLAM 52 Digital, year 2007, single-sided thermal laminator Max. sheet size: 550 x 740mm, Min “ “ 200 x 250mm Max speed 35m/min (4000sph) Paper stock 130 – 450 gr/sqm. Electrical specification – 380-415V, 3ph, 50Hz, 9.kW Dimensions 2.75mL x 1.25mW x 1.7mH Stream feeder Auto sheet feeder, Pneumatic pressure roller, Automatic sheet separator with drop tray delivery Codpfxjulgx Ij Addohf Touch screen controls

Condition: excellent (used), Year of construction: 1993, operating hours: 48,195 h, functionality: fully functional, BILLHOFER AUTOMATIC LAMINATING MACHINE • TYPE : EK 102-50 / M • SIZE : 102 x 114 • YEAR : 2003 • WORK : 48.195 Hours • LOCATION : Istanbul DETAILS: Automatic Feeder A-20-P (Double Sheet Control) Seperator Laminated Delivery Table Electrical Cabinets Very Good Condition Available Immediately Chjdjw Ta Iyopfx Addef

Condition: good (used), Laminator Bagel Digifav 520 B2 automatic laminating machine The machine is 100% functional, in perfect condition, ready for production. Very low mileage. It is an advanced, high-performance machine dedicated to digital printing houses. Production Spain. Technical data: Max sheet size: 520mm x 720mm Min sheet size: 220mm x 220mm Min weight: 130 gsm Max grammage: 350 gsm Operating temperature: 80-145°C Max working speed: 22m/min Weight: 750 kg Power supply 380V Additionally, 6 Bar air A steel, chrome-plated cylinder with a large diameter, filled with oil for greater operational stability. Pneumatic pressure, separation and automatic feeding from a high stack. Adjustable pressing force. Expanding shaft for attaching the foil, mounted on a tilting arm. Touch panel for easy operation. Sheet straightening module. Receiving table. Codpfxew Ic H Ie Addohf Ask about the product

Condition: used, Year of construction: 2009, functionality: fully functional, Complete laminating machine with: automatic feeder, automatic pressure roller, pile sheet feeder. Chsdpfexdm E Eox Addsf

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: Chjdpfjw Hrrrjx Addof 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Year of construction: 2012, condition: ready for operation (used), An Autobond laminating system for sheet-shaped and heat-resistant products is available. Laminating speed: 60m/min, min. sheet dimensions X/Y: 285mm/320mm, max. sheet dimensions X/Y: 1060mm/1060mm, paper thickness range: 90g-650g/m², min. laminating film thickness: 24µm, max. roller pressure: 6t, max. temperature pressure water unit/control: 140°C/135°C. Machine dimensions X/Y: approx. 4000mm/1600mm, weight: approx. 2000kg, operating hours: 28785h. Documentation available. An on-site inspection is possible. Cedpfx Adexbrw Usdjhf

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16004D, type of input current: three-phase, input voltage: 380 V, working width: 1,220 mm, Equipment: compressor, For sale: dual-system laminator by KDX. Year of manufacture: 2016, the machine is in good condition and fully operational. Laminating working width is 1,220 mm, maximum sheet length is 1,650 mm. I will send full documentation to interested parties. The laminator is capable of both thermal and wet lamination (dispersion adhesive). It is equipped with a "hot knife" with automatic angle separation adjustment. In addition to the hot knife, it has two additional separation systems and a highly precise electromagnetic cylinder heating system. Codpewunyhofx Addshf

Condition: good (used), Year of construction: 2000, operating hours: 46,516 h, functionality: fully functional, BILLHOFER AUTOMATIC LAMINATED MACHINE • TYPE : EK 102-50 • SIZE : 102 x 114 • YEAR : 2000 • WORK : 46.516 Hours DETAILS: Automatic Feeder A-20-P (Double Sheet Control) Seperator Laminated Cedovm Ab Espfx Addjhf Delivery Table Electrical Cabinets Very Good Condition Available Immediately

Condition: ready for operation (used), Year of construction: 2012, input voltage: 380 V, Description about the machine: 2-sided, sheet fed, thin film, thermal laminator for short runs Max sheet size: 53 x 75 cm Min sheet size: 32 x 22.5 cm Max speed: 25 m/min 135 gsm to 450 gsm Quick make-ready Easy operation Small footprint Heavy-duty build quality Feeder Heidelberg-Stahl suction drum Bottom separation, continuous run, top loading Air inflates the sheets from the sides, allowing them to float on a bed of air Operator replenishes sheets on the run, thus providing continuous feed Laminator Electrically heated laminating roller Digital temperature controls up to 120°C (248°F) Rubber counter-pressure roller Choice of manually adjustable hand-cams or pneumatics for nip pressure Film mounted on a quick-change bar Film roll perforating mechanism Csdpjwrxqljfx Addehf Sheeter Integral steer & pull separator runs in-line Features include in-feed hold rollers, adjustable anti-curl bar, and variable speed belts Delivery into vibrating jogger table with under-sheet adjustable air control Perfector Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes electrically heated Additional heated roller, quick-change bar, and perforating mechanism for 2nd roll of film

Year of construction: 2009, condition: ready for operation (used), LAMINATING MACHINE FOR DOORS IPS MOD. PC-2500-SCBP Machine for the application of adhesive protective film on flat surfaces. Equipped with motorized feed with rollers and automatic cutting system. Machine for fixed height table line +/- 900 mm. Year 2009. Top and bottom gluing at the same time. TECHNICAL CHARACTERISTICS OF THE MACHINE - MINIMUM / MAXIMUM WORKING THICKNESS 15 / 50 MM - MAXIMUM WORKING WIDTH 2.400 MM - HEIGHT OF THE ROLLERS ADJUSTABLE TO THE FLOOR 840 / 950 MM - TOTAL POWER CONSUMPTION 3 KW - MINIMUM AIR PRESSURE REQUIRED 6 BAR Chsdpfx Ashkr Anjddof - VOLTAGE ELECTRICAL INSTALLATION 220 V - 380 V

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: Chodpfx Adjwz Ev Tedsf width: 200 mm length: 350 mm Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Year of construction: 1992, condition: ready for operation (used), Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used much since. Chsdpfxeq Ixgle Addef

Condition: good (used), Build in 2006 Komfi Aspira Laminating machine Max laminating speed 15 m/min Chsdpjgyzzusfx Addof Max sheet width 52 cm Sheet size max. 52x74 cm; min. 20x20 cm Paper weight . 115-350g/sqm.

Condition: new, Year of construction: 2024, The LF-100 label finishing system. is a professional, compact all-in-one desktop finishing system that enables the die-cutting and laminating of labels in a single pass. labels in a single pass. The system features a high-precision, digital die-cutting digital die-cutter that can produce professional labels in virtually all shapes and sizes. Optionally, a laminate can be applied to give the labels a Chsdpouvigcsfx Addsf labels with a high-gloss and durable surface. durable surface. The LF-100 is designed for a width of 127 mm (5"). designed. The optical camera is designed that it reads only one black mark for each cut layout, which optimizes cutting speed and synchronization. - Media path with ultrasonic sensor to ensure precise media guidance and media guidance and speed for precise precise punching. - Cost-effective, multi-edged blades extend the cutting time and need to be need to be replaced less frequently.

Condition: excellent (used), Year of construction: 2009, operating hours: 110 h, functionality: fully functional, type of input current: three-phase, overall weight: 3,500 kg, Coating and laminating system. For paper and film. Rewinding and unwinding with automatic web edge and web tension control. Laminating unit is cooled. Max. 30 m/min. Working width 650 mm. The machine was only used in the laboratory for tests. Only 110 operating hours since new Hotmelt or dispersion can be used. Hotmelt is melted in a separate extruder and fed to the application unit via a heated hose. Roll or reverse roll is possible. Powerful IR dryer . Exhaust air system and cooling unit can be included. Ma. Roll diameter 800 mm. Core 3 1/2 ". Pneumatic winding shafts. Chjdpsrt Iqbofx Addjf

Condition: excellent (used), Matrix 530DP Double-Sided Pneumatic Laminator with Omni-Flow Feeder Price: Contact for pricing Location: Glendale, UK Availability: In stock – ready to ship Condition: Refurbished by trained engineers – Excellent condition, perfect working order Overview Boost your print finishing with the Matrix 530DP double-sided laminator, fully refurbished and tested by our trained engineers. Designed for professional print rooms, this automated laminating system includes the Omni-Flow Automatic Sheet Feeder, digital foiling/sleeking unit, and silent air compressor. It’s the perfect solution for short, medium, and long-run lamination and foiling. Key Features Professional double-sided lamination up to B2 size (510mm width) in a single pass – saves 50% production time over single-sided models. Omni-Flow Automatic Feeder with deep pile (180mm capacity), handles sheets up to 460mm x 9000mm and stock up to 400gsm. Automatic sheet separation with lamination speeds up to 10 metres per minute. Digital foiling and sleeking unit for premium finishes: foil, holographic, glitter, and Spot UV-style effects. Silent pneumatic compressor for consistent roller pressure without noise disruption. Refurbished and serviced for excellent condition and reliable performance. Included in Package Matrix 530DP Double-Sided Laminator Omni-Flow Automatic Sheet Feeder Foiling/Sleeking Rewinder Silent Air Compressor Why Buy from Glendale? Professionally refurbished and fully tested – every system is serviced by our trained engineers. Expert operator training and ongoing support – we help you get the best results from your equipment. Competitive pricing on consumables – keep running costs low with our affordable supplies. Established, trusted supplier – years of experience serving the print and finishing industry. Specifications Manufacturer Vivid Model Matrix 530DP Double Sided Laminator with Omni-Flow Sheet Feeder Condition Refurbished Stock Number 114957 Sheet Feeder Yes Pneumatic Pressure Yes Air Compressor Yes Max Speed 10 metres per minute Max Sheet Size 460mm x 740mm (550mm width in hand feed) Feeder capacity 180mm Paper Thickness 100-400gsm Warm Up Time 10 minutes Temperature Range 0-140°C Power Supply 32amp 220/240V. Dimensions (L)1800mm excluding exit tray x (W)860mm x (H)1600mm Machine Weight 380kg (Matrix & OmniFlow) Codpfx Adew Tlk Tsdehf

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Lamina System Fully automatic laminator FA 1416. Machine with no mileage, in very good technical condition, after total renovation. Machine in motion. It laminates both closed and open cardboard. Csdpfx Aderit H Rodehf Max. sheet size: width: 1400 mm length: 1600 mm Ppsbqkzsrit H Roa I Ssu Min. sheet size: width: 200 mm length: 350 mm Top sheet: 130 - 450 gm / m2; Bottom sheet: from 250 g / m2, thickness: 0.6 - 10 mm Automatic substrate feeder with continuous sheet feeding Automatic top sheet feeder The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 3.7 m, length - 10.5 m, height 2.9 m Fitting accuracy

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, S2G, a company specializing in the marketing of finishing equipment for printing, reprography, and integrated printing services for 27 years, offers a refurbished and thoroughly tested GMP QTOPIC 380 laminator. Laminating function with GLOSS, MATTE, SOFT TOUCH, and ANTI-SCRATCH MATTE films in digital or offset quality. Features: Codpfx Asvgqg Neddehf Semi-automatic feed with a cell for overlapping sheets. Heated steel cylinder. Display settings: speed, temperature, and tear-off. Output die-cutting system with perforating wheel. Tension and decurling adjustment wheel. Speed: from 1.5 m to 10 m/minute. Paper dimensions: 180/210 mm to 380/500 mm (1200 mm option).