Used Lamination Bandsaw for sale (1,393)

Condition: used, Year of construction: 2016, total height: 1,800 mm, total length: 3,000 mm, total width: 1,300 mm, Colour: Black Empty weight: 1.585 kg Price: On request - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1603012 - Drive system: Conventional - Saw type: Semi-automatic - Horizontal/vertical: Horizontal - Mitre cutting available: Yes - └ Round cutting capacity at 90° [mm]: 360 - └ Round cutting capacity at 45° [mm]: 360 - Round cutting capacity [mm]: 360 - Power [kW]: 3.7 - Saw blade length [mm]: 5200 - Saw blade width [mm]: 34 - Saw blade thickness [mm]: 1.1 - Workpiece clamping: Hydraulic - Options: Digital readout, Chip collection tray - Transport dimensions: 3000mm x 1300mm x 1800mm (l x w x h) Cedpfx Aszx Unksptorg - Transport weight [kg]: 1585kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, operating hours: 200 h, functionality: fully functional, SHOWROOM machine, the advertised machine was never delivered and was only run for test purposes. Rotating doypack wrapping machine DEAP-8BT: The 8-station rotating horizontal filling and sealing machine fills and seals doypack stand-up and seals Doypack stand-up pouches with cycle times of up to 50 pieces per minute. minute. The compact design of the rotary machine is very space-saving and flexibly adjustable to different bag widths. The rotary-type machines in the AP series are the cost-effective alternative to complex linear filling machines without time-consuming set-up times. The stand-up pouches are transported via a transported via a bag magazine and filled and sealed in 8 rotating workstations. sealed. Applicable products: The DEAP-8BT series reliably packs - Pet food - Cosmetics (shower gel, soap) - Food (e.g. muesli or dried fruit) dried fruit) - small parts Machine information: - Quick format change of the bags - Additional modules can be integrated (gas flushing, weighing systems, double sealing) Cedpfx Aotuwf Eoptorg - Touch panel control, with storable programs programs - Central gripper adjustment - Customized special design - for special widths or special feeding systems - up to 50 pieces/min (depending on bag size) Other information: - Safety standards: CE conformity, DIN standards - Noise level: Below 80 decibels according to DIN 45635 - Applicable bag types: Pre-made stand-up pouches, flat pouches, spout pouches, pressure seal pouches, slider pouches, gusseted bags, single-lip (depending on optional components - Film types: OPP/CPP, OPP/CE, PET, PE, laminated films, composite films - Product types: piece goods (screws, nuts, etc.), bulk goods (flour, nuts, etc.), liquids (sauces, paints, etc.) This advertisement refers to the packaging machine and not the multihead weigher.

Condition: new, cutting diameter 170 mm dimensions of saw-band 2080 x 20 x 0,9 mm table height 880 mm cutting speed 40 + 80 m/min 170 mm 125 mm 150 x 190 mm Crjdpfx Asg Trvreptsg 95 x 120 mm total power requirement 1,1 kW weight of the machine ca. 0,24 t Dimensions (LxWxH) 870 x 1.550 x 1.740 mm mm This metal band saw comes with a closed worm gear. It also has hydraulic pressure control and a base frame that can be rotated through 45 degrees. Other features include emergency stop, the complete cooling system, the factory base frame, automatic switch-off and the quick-release device.

Year of construction: 2009, condition: ready for operation (used), LAMINATING MACHINE FOR IPS DOORS MODEL: PC-2500-SCBP Machine for applying adhesive protective film to flat surfaces. Equipped with motorized feed with rollers and an automatic cutting system. Machine for a fixed-height table line, +/- 900 mm. Year 2009. Simultaneous top and bottom adhesion. TECHNICAL CHARACTERISTICS OF THE MACHINE Cjdpfx Apjhkr Anotjrg - MINIMUM / MAXIMUM WORKING THICKNESS 15 / 50 MM - MAXIMUM WORKING WIDTH 2,400 MM - HEIGHT OF ROLLER, ADJUSTABLE FROM THE FLOOR 840 / 950 MM - TOTAL POWER CONSUMPTION OF THE MACHINE 3 KW - MINIMUM REQUIRED AIR PRESSURE 6 BAR - ELECTRICAL INSTALLATION VOLTAGE 220 V - 380 V

Condition: used, DIRECT FROM PRINTING SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from your side. offer consists of: Fastbind Casematic H32 PRO Covermaker / Casemaker including accessories (laminator, block press) The FASTBIND Casmatic H32Pro is a professional cover maker / case maker with a folding unit for the on-demand production of individual book covers for hardcover bindings and photo books up to 330 x 330 mm. • For the production of individually printed hardcover book covers. • The desired motif simply needs to be printed on self-adhesive material or material that is subsequently self-adhesive on the back. Crsdpfxsu Srxbe Aptsg • Of course, all known book cover materials can also be used if they are self-adhesive or have a self-adhesive finish or glue • With the help of the Hardcover Maker, the gray cardboard is inserted and covered precisely. • Thanks to numerous tools, the Casematic makes this possible semi-automatically in just a few steps • The work table is equipped with a vacuum fixation which, in addition to the light table with measuring scale, ensures exact positioning of the printed sheet • Using the optional cutting device, the printed sheet is trimmed precisely at the corners after the gray cardboard has been applied • With the folding unit, the edges are then folded around the gray cardboard without any creases, so that a cleanly manufactured hardcover in bookbinding quality is created • optional: corner cutter • optional: side stop • Max. paper size: W740 x H370 mm • max. book format: 330 x 330 x 40 mm (W x H x RB) • Max. fold length: 700 mm • Connection: 240 V / 50 Hz • Dimensions: W830 x D470 x H200 mm • Weight: 23kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: new, cutting diameter 250 mm saw band length 3150 x 27 x 0,9 mm table height 750 mm cutting width 170 x 310 mm cutting speed 25 - 90 m/min 130 mm 130 mm 205 mm Impact energy 205 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,5 t Crodpfx Aopam E Reptjg dimensions 0,95 x 1,16 x 1,98 m Solid band saw - Double miter cuts on the right up to 60°, on the left up to 45° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material stop max 600mm

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Cjdpfxofg E H Uj Apterg Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, Saw blade --- 2925 x 27 x 0.9 mm Saw speed --- variable, 20 ~ 80 m/min Motor --- 400V - 2.2 kW Crsdpfx Aoga Tzusptog Weight --- 495 kg Cutting capacity at 90° --- 270 mm / 260 x 320 mm Cutting capacity at 60° --- 140 mm / 140 x 140 mm Cutting capacity at 45° --- 230 mm / 220 x 220 mm Cutting capacity at -45° --- 200 mm / 220 x 150 mm INCLUDED Saw blade Workpiece stop Base cabinet Manometer for saw blade tension Saw blade guide with carbide inserts Quick-release clamp Cooling pump Hydraulic cylinder Motor protection switch Automatic end stop

Condition: new, cutting diameter 250 mm saw band length 3150 x 27 x 0,9 mm table height 700 mm cutting width 250 x 320 mm cutting speed 25 - 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm 120 mm 120 mm 190 mm Impact energy 190 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions 0,95 x 1,16 x 1,98 m Rock-solid band saw for solid material Csdpfx Ajff Efrsptsrg - Double miter cuts up to 60° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material suggestion

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height button - Ball bearing turntable Cjdpfx Asd Iipxeptsrg - hydraulic Vice, laterally displaceable - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: Crjdpfsd Iip Rex Aptjg - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling Share of freight costs 120 EUR

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, - loading table for jumbo sizes 6000 x 3210 mm with integrated transport belts - laminated glass cutting module with cutting length : 4600 mm 4 unloading arms new heating element from december 2025 min. glass thikness : 3 + 3 mm + PVB max.glass thikness: 8 + 8 mm + PVB Knife separation : After automatic cutting and separation the PVB is cut by a blade giving a clean edge without any residue Csdpoyh T Ruofx Aptsrg PC control system windows PC " View Plus " including flat screen monitor with cutting pattern display and optimisation import Lay out attached in photos

Condition: new, capacity 90 degrees: round 300 mm capacity 90 degrees: square 330 mm 400 x 310 saw band length 3820 x 34 x 1,1 mm band speed 22 - 88 m/min table height 930 mm total power requirement 2,2 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 2,22 x 1,2 x 2,1 m Double miter band saw, hydraulic semi-automatic • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Material turntable with ball bearings b. Cjdpewinykefx Aptjrg • Adjustable quick-release • Material height sensor Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, cutting diameter 315 mm dimensions of saw-band 3460 x 1,1 x 34 mm cutting speed 35 / 70 m/min Csdpfx Apewfyq Tjtsrg cutting width 400 x 250 mm 250 / 280 mm Impact energy 220 / 280 mm 180 mm 140 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,6 t dimensions 2,1 x 1,0 x 1,5 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling

Condition: used, Year of construction: 2009, functionality: fully functional, Complete laminating machine with: automatic feeder, automatic pressure roller, pile sheet feeder. Cedpfx Asxdm E Eopterg

Condition: used, Year of construction: 2008, offer consists of: laminating machine Gemini C 400 A with jogger - developed for a digital printing machines outputs lamination - pneumatic system of laminating rollers pressure with an easy thrust control - Anti-Curl-Mechanic Technical details: - feeder: flatpile feeder; loading height: 230mm - Format: min. 320x250mm; max. 380x580mm - Paperweight: 115-350g/qm - film: 20-45 µm - film-types: OPP, Nylon - Inner diameter roll: 70-80mm - outer diameter roll: max. 400mm - capacity: 0-15m/min; max. 1800 sheets/h with Format B3 - warming up time: approx. 10 Min - weight: 365kg - power supply: 230 V, 2,3kW, 16A - floor space: : 74 x 280 cm We can also organize the following for you: Csdpfxezpwkve Aptorg packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2013, The Schmedt PräForm Neo is a combined book press and joint setting machine used in bookbinding. It is designed to press hardcover books immediately after the book block has been cased into the cover, while simultaneously burning in and shaping a clean, permanent joint (the hinge groove of the book). Key Features and Functions - 2-Way System: The mechanical pressing of the book surfaces and the pneumatic (compressed-air controlled) joint setting occur sequentially. - Heated Components: The machine features heated light-alloy pressing plates as well as heated joint-forming bars. - Adjustable Pressure: The pressure of the joint-forming bars can be adjusted via a pneumatic regulator, independently of the general book pressing force. - Flexibility: It is suitable for single books as well as short to medium production runs, processing various cover materials such as cloth or laminated paper. - Combination: It is specifically designed to be used alongside casing-in machines like the Schmedt PräLeg Neo. All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Codpfjzwu Saox Apterg Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: like new (used), functionality: fully functional, working width: 1,300 mm, grinding width: 1,300 mm, overall weight: 2,240 kg, grinding height: 160 mm, working height: 160 mm, height adjustment type: electric, workpiece height (max.): 160 mm, table width: 1,300 mm, workpiece width (max.): 1,300 mm, VIET Challenge 211 B Wide Belt Sander – 2 Heads! LIKE NEW! Professional, Italian wide belt sander – VIET Italia Challenge 211 B calibrator. This machine is equipped with two sanding heads, enabling calibration and precise sanding in a single pass. Head configuration: - First head – calibrating roller - Second head – hard rubber roller for precise sanding - Pneumatic oscillation and belt tensioning - Air blowing and cleaning system for the belts on both heads - Pressure rollers for processing shorter workpieces The machine is suitable for processing solid wood, laminated boards, MDF, plywood, veneer, and furniture components. Its heavy-duty construction ensures stability, high calibration accuracy, and excellent surface finish. Technical data: - Manufacturer: VIET Italia - Model: Challenge 211 B - Type: Wide belt sander / calibrator - Number of sanding heads: 2 - Maximum working width: 1300 mm - Material thickness range: approximately 3–160 mm - Adjustable feed speed - Control from the operator panel - Pneumatic belt tensioning - Pneumatic belt oscillation - Air blowing of sanding belts - Pressure rollers for short workpieces - Power supply: 400 V - Compressed air requirement: approximately 6 bar - Machine weight: approximately 2240 kg The machine is available immediately. It can be started and inspected before purchase. We offer assistance with loading and can arrange transport throughout Poland and abroad. JBS WOODWORKING MACHINERY Sale of used and new woodworking machines. It is possible to view the machine in operation by prior arrangement. You can test the machine on-site. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY Cedpfx Apozxz E Nstorg WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Year of construction: 2019, condition: used, We are offering this used SM Innotech GmbH & Co.KG Incapcell 22-18 laminator, year of manufacture 2019. The system has very low operating hours, as it was used as a test machine for trial purposes. Individual software updates or other modifications can be provided according to requirements and at additional cost. The system is available for immediate delivery. If you have any questions or need further information, please feel free to send us a message or give us a call. Csdpfxoy Dq D Ie Apterg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: AC, Equipment: compressor, Foliant VEGA 400a Fully Automatic Laminating Machine Crsdpjyxyzrefx Aptog

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Very neat twin-column automatic bandsaw with NC control on the length measuring system. Capacity Ø 360 mm; max. height 360 mm; max. width 380 mm. Saw blade dimension: 4430 x 34 x 1 mm. Infinitely variable band speed from 25 to 112 m/min. Main motor 3.75 kW, total power 4.7 kW. Single feed stroke 500 mm, multiple up to max. 4500 mm. Machine equipped with chip conveyor, powered chip brush, and bundle clamping device. Credpjyzcacefx Aptjg

Condition: good (used), Year of construction: 1980, Bandsaw blade dimensions: recommended size 3400 / 3200 mm Cutting width: 400 mm Credpfx Apjzvnlqjtog Bandsaw blade length min./max.: 3200 / 3400 mm Bandsaw blade width: 20 x 3 mm Cutting speed: 10 - 2150 / 8 steps (manual) m/min Table size: 670 x 670 mm Table height above floor: 1020 mm Table tilting +/-: left 10° and right 30° Table movement horizontal: 270 mm Total power requirement: approx. 1.5 kW Machine weight approx.: 650 kg Machine dimensions (LxWxH): 1.2 x 1.05 x 2.0 m

Condition: good (used), Morgana Autocreaser PRO 33 Automatic Creasing Machine The machine is fully operational and ready to use. It is the most efficient creasing system on the market, with a robust construction. Made in England. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. Instruction manual included. Manufacturer’s description: The Morgana Autocreaser Pro 33 is one of the world’s most popular automatic creasing machines, manufactured by the British company Morgana Systems Ltd. The machine allows for strip creasing, line perforation, and micro-perforation. The 7″ color Smart Screen programmer allows for easy machine programming. Working width up to 330 mm Crsdpfozt H Rmox Aptog Productivity up to 8,500 sheets/h (A4), 11,000 sheets/h (A5) Paper feeding via a vacuum cylinder Programmable up to 16 creases in a single pass, unlimited number of programs Creasing paper weights from 0.11-0.4 mm (approx. 80-400 gsm) Option to install additional perforating discs – 20, 28, 56, or 90 notches Technical parameters: Maximum format (width/length): 330 x 700 mm Minimum format: 140 x 210 mm Maximum grammage: 0.4 mm (approx. 400 gsm) including laminated material Minimum grammage: 0.11 mm Maximum number of creases in a single pass: 16 Number of programs: alphanumeric, unlimited Productivity: 8,500 sheets/h (A4-1 creasing), 11,000 sheets/h (A5-1 creasing) Min. creasing distance from the front edge: 2.5 mm Min. creasing distance from the rear edge: 35 mm Minimum distance between creases: 1 mm Machine dimensions (L x W x H): 1450 mm x 522 mm x 1224 mm Net weight: 121 kg Power supply: 230V, 50 Hz

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The equipment is available for sale as a complete system or in individual parts/components. DIP-TECH AR 6000 digital glass printing system, manufactured in 2013, with an integrated drying module. The machine can be dismantled and sold as spare parts. This is the last opportunity to purchase a complete, fully operational system. Please contact us for further information, specifications, photos, available components, and pricing. Csdpfx Apeymb Tqetorg Technical specifications: • Max. glass size: 3000 × 6000 mm • Min. glass size: 500 × 500 mm • Glass thickness: approx. 4–19 mm • Printing technology: Digital ceramic ink printing directly onto glass • Drying module: Integrated dryer included • Ink type: Ceramic inks – suitable for tempering • Printing technology: Digital ceramic in-glass printing • Application: Architectural and interior glass • Glass types: Float, tempered, laminated Key Advantages: ✔ Large-format industrial printer (6-meter capability) ✔ Integrated drying module – faster production cycle ✔ Improved ink stabilization before tempering ✔ Reduced print defects and handling risks ✔ Suitable for façade, architectural, and interior glass ✔ Machine in production – ready for immediate operation

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 345, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,350 mm, total length: 1,600 mm, total width: 1,460 mm, overall weight: 460 kg, The Ergonomic 290.250 GAE is an automatic bandsaw with a smooth arm feed, allowing for cutting materials with a diameter ranging from 5 to 250 mm. Where is the Ergonomic 290.250 GAE best suited? Cjdpjzypn Uefx Aptorg - on construction sites; - in metalworking workshops; - in production halls; - anywhere where precision and accuracy are important; - for cutting metals. How does the Ergonomic 290.250 GAE compare to the competition? - hydraulic arm lifting and lowering; - hydraulic vise; - cutting to the right at angles of 0° – 45° – 60°; - smooth arm feed; - ability to program different lengths and quantities of cut pieces in a single program; - ADFR system; - built-in cooling system to protect against overheating; - bimetallic bandsaw blade; - brush that thoroughly cleans the blade of chips; - ability to memorize the arm position; - clear LCD display. The machine is in perfect working order; we invite you to inspect it.