Used Letter Press Machine for sale (92,284)

Condition: good (used), Year of construction: 2005, Year of manufacture: 2005 Condition: functional Model:Schulze Air press x Double pneumatic transfer press, semi-automatic model. The print can be adjusted using an air gauge, which also ensures the same pressure regardless of the quality of the garment. Digital temperature and time control. Automatically opens when the transfer is finished. Bottom plates are available in different sizes. - Print size: 400 x 500 Ljdpfoudydgsx Af Soai - Dimensions: 1.67 x 0.74 x 0.98 m - Weight (including packaging): 170 kg - Power: 10 A / 230 V - Temperature: max. 220 °C - Temperature accuracy: ± 0.5% - Power: 2.4 kW - Heating time: 12 min. at 180 °C - Timer range: max. 9 min., 59 sec. - Operating pressure: 2490 kg

Condition: ready for operation (used), Punching machine, hole punch, blanking press, eccentric press, Used machine Manufacturer: Haulick + Roos Werkzeugmaschinen GmbH, Pforzheim, Germany Type: RVD 32-540 HS Serial number: 1201847 Year of manufacture: 1985 Pressing force: 320 kN (≈ 32 tons) Ledpfx Aexdxbxjf Ssai Stroke rate (speed range): 30 – 1200 strokes/min Drive (motor power): ~18 kW Stroke length: 0 – 40 mm Ram adjustment: 0 – 50 mm Centre hole in ram: Ø 52 mm This is a high-speed eccentric press (HS = High Speed), suitable for pressing thin sheet metal in mass production, for example in the electronics or automotive industries for small components.

Condition: good (used), functionality: fully functional, Year of construction: 1980, used press brake in good condition, full function Laodpfsunkr Djx Af Soi

Condition: used, Die PräForm ist eine Maschine zum Einpressen von Büchern nach dem Einhängen und dem gleichzeitigem Einbrennen des Falzes. The PräForm is a machine to press books after casing-in, setting the joint at the same time and processes single books just as well as series of books.  Laodpfx Aexgi Hqjf Soi Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 2100 Case Press and Joint-Setting machine Schmedt PräForm HHS 2100 Baujahr / Year Serial-Nr. 77 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 Laedpexuhw Defx Af Sji 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Model – The Offshell Press MK V (Peeler). ✅ Serial numbers – TPR100/05/070 & TPR100/05/071. ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model Laedpfx Aegvkmrsf Soi is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Year of construction: 2000, condition: good (used), Used Amada Tp150ex 150ton press / stamping machine Amada TP150 EX electric Power Press with feed Atkin Bhp feed and Atkin BHP decoiler New/year 2000 TP150 Laedpfxsn Smg Te Af Soi Model Amada TP-150EX Weight 16 tons Accessories Sick Guards Hydraulic Overload Variable Speed Drive Hydraulic Tool Clamping Capacity 15o tons Supplied New July 2000 Stroke 175mm Bed Area 1250 x 750 x 160mm Ram Area 700 x 550mm Ram Adjustment 100mm (motorised) Die Height 390mm Ideal for automotive or aerospace sheet metal press work New c and h frame presses also available.

Condition: ready for operation (used), - invoersysteem voor plat- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 cap: 220 ton maximale lengte: 15 200 mm breedte/dikte: 500/25 mm hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 cap: 240 ton maximale lengte: 15 200 mm 200 x 200 mm / 16 mm Hydraulisch ponsen VPO 1000 cap: 100 ton ponsdiameter/dikte: 57/15 mm of 32/25 mm 4 ponsunits voor vlak staal (Verticale positie) 1 ponseenheid voor hoekstaal (horizontale positie) incl. gereedschap Laedjwlkw Dspfx Af Sei Hydraulische teller VNI 1/36 1 codeerschijf 36 tekens tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 37 kW - 250 bar

Condition: used, Pneumatic Single-Column Press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Air-Powered Press Serial No. 3437 Year of manufacture: approx. 1990 Press force: 3.0 tons at 6 bar Press force: 2.6 tons at 5 bar Press force: 2.2 tons at 4 bar Press force: 1.6 tons at 3 bar Press force: 1.0 ton at 2 bar Throat depth: 150 mm Power stroke: 6 mm Pre-stroke: 50 mm Total stroke: 56 mm Ram surface: Ø 100 mm Tool mount: Ø 12 mm Installation height: max. 180 mm Table area: 200 x 200 mm Lodpfxsw A Srwo Af Seai Compressed air requirement: max. 6 bar - Pneumatic power cylinder with mechanical power amplifier (wedge-lever principle) - Press cylinder height adjustable on the frame via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Required space (L x W x H): 440 x 230 x 750 mm Weight: 127 kg Good condition 2 units available, price per unit

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97102, type of input current: three-phase, input voltage: 220 V, pressing force: 10 t, compressed air connection: 6 bar, Baier Prägepressen GEBA 4/B Hotstamping Machine Pressing force: 10 tons This machine was used for decorating plastic objects by means of hot stamping technology. Suitable for printing with gold and silver foil. The machine is also equipped for positioning and printing heat transfers. Lasdpfxoxpudge Af Sji Very robust construction. Works well. The machine is equipped with a sliding table for printing smaller quantities, using a single holding jig. Also included is a Weiss rotary table with eight positions, enabling high production speeds with eight product holders in operation.

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Lodpfowud Tkox Af Sjai Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: new, Year of construction: 2025, Equipment: auto duplex, Demo system Revoria Press SC285S Very low print count, as it was only used for demonstrations. Meter reading available upon request. Configuration can be customized as needed. Shown here: SC285S with Fiery SC21 Pink Toner Enabling Kit Air Suction Feeder C1-DSXL Banner Unit for Air Suction Feeder C1-DSXL Post Card Kit for Air Suction Feeder Envelope Kit for Air Suction Feeder Interface Decurler Module D1 Ledpfexgqvmox Af Soai Static Eliminator D1 Charge Corotron Assembly for Static Eliminator Smart Monitoring Gate D1 Finisher D6 with Booklet Maker Banner Print Extension Kit Extra Sale/rental exclusively within Germany! Price on request!

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 750 mm, table length: 1,000 mm, stroke adjustment: 140 mm, pressing force: 130 t, ram bore: 55 mm, punching force: 130 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD EQUIPMENT • Steel Construction Frame • Gear Unit Operating in Sealed Oil Bath Lajdpfsvtyvgsx Af Soi • Four-Sided Bearing Alignment • Nodular Cast Iron Connecting Rod and Crank Bearings • Crankshaft and Drive Shafts Manufactured from 4140 Tempered Steel • Centralized Fully Automatic Grease Lubrication System • Pneumatic Clutch and Brake System • CE-Conformant Safety Standards • Dual-Base Safety Valve • Manually Adjustable Stroke • Photocell Safety Light Curtain • PLC Control System • Touchscreen LCD Panel (for 150-300 ton models) • Dual-Hand Safety Pedal Control System • Mechanical Safety Fuse System • Hydraulic Safety Fuse System (for 200-300 ton models) • Emergency Reverse Motor Motion • Complies with Occupational Health and Safety Regulations • Anti-Vibration Mounts • CE Certified • Models Available from 20 Tons to 300 Tons • 24-Month Warranty • Country of Origin: Turkey TECHNICAL SPECIFICATIONS CECP 130 C-TYPE MONOBLOCK FRAME Capacity: 130 Ton Throat Depth: mm Table-to-Ram Distance: 475 mm Ram Adjustment: 80 mm Press Width: 1600 mm Press Depth: 2000 mm Press Height: 3000 mm Table Hole Diameter: 220 mm Table Dimensions: 750 x 1000 mm Die Tie Rod Hole Diameter: 55 mm Ram Face Dimensions: 350 x 550 mm Table Height from Floor: mm Stroke: 20 – 140 mm Strokes per Minute: 45 spm Motor Power: 7.5 kW Motor Speed: 1400 RPM Weight: 6,000 kg • As a manufacturer, technical specifications may be modified upon request.

Condition: excellent (used), Year of construction: 1970, machine/vehicle number: T171 074 N, WITH HOT FOIL STAMPING DEVICE Laedpfx Ajw Rcrpsf Sei Format: A4 Number of Colors: 1

Condition: used, Swivel bending machine FASTI Type 2095-25-2,5 Serial no. 94 295 004 Year of construction 1994 effective length 2540 mm max. sheet thickness 2.5 mm Stroke of upper beam 380 mm Motor power bending beam 2.2 kW Laodsttc Uajpfx Af Ssi Mains connection 400 Volt, 50 Hz - NC control FASTImatic FM100 - One-piece 135° pointed rail - Controlled backgauge - Continuous stop rail - controlled bending angle via control unit - electric foot switch weight 3000 kg good condition

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top press and blade movement is hydraulic - mm ruler system is available for height and feed of the blades - Centering miter wedge is hydraulic - Drain button available for fine adjustment Lajdsrbk Tfspfx Af Ssi - Hydraulic press and 2 pedals are used for profile clamping - There is polyamide sheet to prevent damage to profile surfaces - Right and left handles available for profile support

Condition: new, Year of construction: 2025, throat depth: 370 mm, table width: 700 mm, table length: 1,200 mm, pressing force: 300 t, power: 30 kW (40.79 HP), punching force: 300 t, warranty duration: 24 months, Equipment: safety light barrier, C TYPE ECCENTRIC PRESSES GENERAL FEATURES - Steel construction frame - Stress relief on the frame and welded parts by vibration - Table-to-table parallelism and perpendicularity tolerance in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Ram supported by 4 guides - Parts such as ram, connecting rod, and slide block are made of cast steel, GS52 - High-strength one-piece crankshaft – 4140 - Bronze bushings in the connecting rod (Zr14) - Equipped with spare bolster table - Table-to-ram adjustment by ratchet gear (motorized for 150 tons and above) - Manual central lubrication - Pneumatic foot pedal with locking and time-controlled dual hand control - Electric counter - PLC application and touchscreen – DELTA - Electric switching components from SIEMENS-SCHNEIDER - CE application OPTIONAL - Finger protection light barriers – SICK, LEUZE - Safety PLC (controls entire electric system, valves, dual control, and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Lockable limit switch and control panel - Safety block - Protective guards in accordance with CE regulations TYPE C TYPE MONOBLOC FRAME Capacity 300 Ton Throat Depth 370 mm Table-to-Ram Distance 530 mm Slide-to-Table Distance 650 mm Distance Between Walls 470 mm Ram Adjustment 150 mm Ledpow E Rkqofx Af Seai Approx. Press Width 2000 mm Approx. Press Depth 2700 mm Approx. Press Height 3200 mm Front Anchor Size 940 mm Side Anchor Size 1440 mm Table Hole Diameter 260 mm Table Size 700 / 1200 mm Die Mounting Hole Diameter 60 mm Ram Size 780 / 400 mm Table Height from Ground 810 mm Stroke Adjustment 20 / 200 mm Strokes per Minute 38 spm Motor Power 30 + 2.2 kW Motor Speed 1450 RPM Approximate Weight 13,200 kg

Condition: excellent (used), Year of construction: 1955, machine/vehicle number: 104 678 N, Format: A4 Lasdsw Rb U Nepfx Af Sji Number of Colors: 1

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Lajdpfsw Iq Ugjx Af Ssi Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: new, Year of construction: 2025, throat depth: 350 mm, drop-through hole in table: 250 mm, table width: 1,100 mm, table length: 700 mm, stroke adjustment: 190 mm, pressing force: 250 t, ram bore: 60 mm, power: 22 kW (29.91 HP), punching force: 250 t, warranty duration: 24 months, Equipment: safety light barrier, STANDARD HARDWARE Below are the technical specifications and general features for the 250-300 ton C-type eccentric press you inquired about. - Welded steel construction frame - Stress-relieved and welded components by means of vibration - Parallelism and rigidity tolerance between tables in compliance with ISO and DIN standards - Pneumatic clutch and brake combination - OMPI (Italy) - Components such as ram, connecting rod, worm gear, in steel casting GS52 - High-strength solid crankshaft – 4140 grade - Connecting rod lined with bronze (Zr14) - Spare bolster plate - Mechanical interlock safety device Lasdsvtyy Sepfx Af Soi - Ratchet mechanism for bolster/table adjustment - Manual central lubrication system - Pneumatic pedal with lock and dual control, adjustable timing - Electric stroke counter - PLC integration and production line display – DELTA - Electrical switchgear components by SIEMENS and SCHNEIDER - CE conformity - Finger protection light curtains – SICK, LEUZE, KEYENCE - Safety PLC (oversees all electrical systems, valves, dual and pedal systems) – PILZ - Dual solenoid safety valve – GPA - Locked position switch and control panel - Mechanical safety wedge - CE-compliant protective enclosures TECHNICAL SPECIFICATIONS Type: C-TYPE MONOBLOCK FRAME Capacity: 250 Tons Throat Depth: 350 mm Table-to-Ram Distance: 520 mm Table-to-Guide Distance: 630 mm Frame Width: 520 mm Ram Adjustment: 150 mm Press Width: 2000 mm Press Depth: 2500 mm Press Height: 3100 mm Front Mounting Holes: 930 mm Side Mounting Holes: 1430 mm Table Bore Diameter: 250 mm Table Dimensions (W x L): 700 x 1100 mm Die Tie Rod Hole Diameter: 60 mm Ram Face (W x L): 670 x 380 mm Table Height from Floor: 810 mm Stroke: 20 - 160 mm Strokes per Minute: 40 spm Motor Power: 22 + 2.2 kW Motor Speed: 1450 RPM Weight: 12,000 kg *As a manufacturer, technical specifications are subject to change upon request. OPTIONAL EQUIPMENT (NOT INCLUDED IN PRICE) - 8-point slide adjustment & hydraulic safety system - Speed control - Automatic lubrication system

Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 670 mm, table length: 950 mm, drop-through hole in table: 180 mm, power: 7.5 kW (10.20 HP), punching force: 100 t, ram bore: 45 mm, stroke adjustment: 120 mm, warranty duration: 24 months, Equipment: safety light barrier, STANDARD FEATURES: • STEEL CONSTRUCTION BODY • 4-SURFACE BEARING RECORD • DUCTILE IRON CONNECTING ROD AND ANGLE BEARINGS • CRANKSHAFT AND TRANSMISSION SHAFTS 4140 STEEL STEEL • CENTRAL SYSTEM FULLY AUTOMATIC GREASE LUBRICATION • PNEUMATIC CLUTCH AND BRAKE COMBINATION • COMPLIANT WITH CE SAFETY DIRECTIVES • DOUBLE COIL SAFETY VALVE • MANUAL ADJUSTABLE STROKE • AUTOMATIC ADJUSTABLE STROKE BETWEEN 150-300 TONS • PHOTOCELL PROTECTION CURTAIN • PLC CONTROL SYSTEM • TOUCH LCD SCREEN BETWEEN 150-300 TONS • DOUBLE-HAND PEDAL CONTROL SYSTEM • MECHANICAL INSURANCE SYSTEM • HYDRAULIC INSURANCE SYSTEM BETWEEN 200-300 TONS • EMERGENCY REVERSE MOTOR MOVEMENT • IN ACCORDANCE WITH OCCUPATIONAL SAFETY REGULATIONS • VIBRATION PREVENTIVE WEDGE • COUNTRY OF ORIGIN: TURKEY • WARRANTY PERIOD: 24 MONTHS • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. TECHNICAL SPECIFICATIONS: PRESSURE (TON) 100 STROKE ADJUSTMENT RANGE (MM) 10-120 NUMBER OF STROKES PER MINUTE (D/MIN-RPM) 50 RAM - REGULATION RANGE (MM) RAM - TABLE DISTANCE (MM) 450 LOWER TABLE DIMENSIONS (MM) 670X950 LOWER TABLE HOLE DIAMETER (MM) 180 RAM TABLE DIMENSIONS (MM) 350X530 RAM MOLD EYEBALL DIMENSIONS (MM) 45 MOTOR POWER (KW) 7.5 WEIGHT (KG) 4600 MACHINE DIMENSIONS (MM) (H - W - L ) • SINCE WE ARE A MANUFACTURER CHANGES CAN BE MADE IN TECHNICAL SPECIFICATIONS IF REQUESTED. Laedpfevtx Insx Af Sei

Condition: new, Year of construction: 2024, overall weight: 1,140 kg, tool height: 200 mm, operating speed: 10 mm/s, total length: 1,300 mm, total height: 1,300 mm, total width: 600 mm, reverse speed: 10 mm/s, working height: 935 mm, table width: 600 mm, table length: 1,200 mm, stroke length: 290 mm, pressing force: 40 t, Equipment: emergency stop, STANDARD ACCESSORIES Ergonomic Tool Clamping Table Hydraulic Speed and Pressure Adjustment Easily Adjustable Back Gauge Induction Hardened Support Pins NC Control Lajdpfx Aot H Sxcjf Ssi Easy Tool Change MODEL HP 40 Max Pressure At 200 Bars ton 40 Bending Capacity Flat Material mm 250×16 Max Stroke mm 300 Height Of Toolings mm 250 Working Speed mm/sec 10 Motor Power kw 4 Net Weight kg 1190

Condition: new, Year of construction: 2025, ram adjustment: 150 mm, drop-through hole in table: 260 mm, table width: 900 mm, table length: 1,200 mm, stroke adjustment: 200 mm, pressing force: 300 t, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS Lsdpsvyr Easfx Af Soai GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 300 Tons Table-Ram Distance 530 Mm Distance Between Walls 1280 Mm Ram Adjustment 150 Mm Press Approximate Width 1700 Mm Press Approximate Depth 2200 Mm Press Approximate Height 3500 Mm Table Hole Diameter 260 Mm Table Size 900 / 1200 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 470 / 900 Mm Table Dimensions from Floor 1000 Mm Stroke Adjustment 20 / 200 Mm Stroke Number/Minute 38 Pcs/min. Engine Power 30 + 2.2 KW Engine Speed 1450 RPM Approximate Weight 18,000 Kg

Condition: new, Year of construction: 2025, ram adjustment: 150 mm, drop-through hole in table: 240 mm, table width: 850 mm, table length: 1,150 mm, stroke adjustment: 160 mm, pressing force: 250 t, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 250 Tons Table-Ram Distance 520 Mm Distance Between Walls 1230 Mm Lajdpfx Aevyr D Aef Soi Ram Adjustment 150 Mm Press Approximate Width 1600 Mm Press Approximate Depth 2100 Mm Press Approximate Height 3400 Mm Table Hole Diameter 240 Mm Table Size 850 / 1150 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 470 / 900 Mm Table Dimensions from Floor 950 Mm Stroke Adjustment 20 / 160 Mm Stroke Number/Minute 40 Units/min. Engine Power 22 + 2.2 KW Engine Speed 1450 RPM Approximate Weight 16,000 Kg

Condition: new, Year of construction: 2025, ram adjustment: 130 mm, drop-through hole in table: 240 mm, table width: 800 mm, table length: 1,070 mm, stroke adjustment: 160 mm, pressing force: 200 t, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. Lajdpfxevyr Die Af Sji TYPE D TYPE MONOBLOCK BODY Capacity 200 Tons Table-Ram Distance 500 Mm Distance Between Walls 1150 Mm Ram Adjustment 130 Mm Press Approximate Width 1500 Mm Press Approximate Depth 2000 Mm Press Approximate Height 3200 Mm Table Hole Diameter 240 Mm Table Size 800 / 1070 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 450 / 800 Mm Table Dimensions from Floor 950 Mm Stroke Adjustment 20 / 160 Mm Stroke Number/Minute 40 Units/min. Engine Power 18.5 + 0.75 KW Engine Speed 1450 RPM Approximate Weight 14,000 Kg