Used Linear Axis for sale (11,473)

Condition: excellent (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, total height: 2,570 mm, total length: 2,995 mm, total width: 2,190 mm, table width: 540 mm, table length: 900 mm, table load: 700 kg, rotational speed (min.): 8,000 rpm, GX- Performance VMC's Dr HeidenHain iTNC530 with HR 410 Handwheel  Coolant system Rigid sructure and superior reliability Central lubrication X - Travel: 800mm Y - Travel: 540mm Z - Travel: 540mm Table Length: 900mm Table Width: 540mm Table load: 700 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 13kW Speeds / ranges: 8000Rpm ATC / revolver: 20 Number of controlled axis:3 Chip conveyor: Yes Coolantsystem: Yes Length: 2995mm Width: 2190mm Height: 2570mm Hjdpfeyt Hnasx Agwjfd Weight: 4900kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), travel distance X-axis: 12,000 mm, travel distance Y-axis: 7,300 mm, travel distance Z-axis: 3,000 mm, total length: 30,000 mm, table length: 12,000 mm, table width: 4,730 mm, total width: 12,000 mm, total height: 10,475 mm, table load: 2,50,000 kg, overall weight: 4,00,000 kg, Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm Hfedjytrxkjpfx Agwed - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 400.000 Kg Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2017, operating hours: 29,532 h, spindle speed (max.): 10,000 rpm, overall weight: 27,750 kg, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 4,000 kg, number of axes: 5, This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information. • Table dimensions: 3200 mm (L) x 1100 mm (W) • C 360° rotary axis • Maximum load capacity: Table 4000 kg / Divider 1200 kg • Tool magazine capacity: 60 pockets Hfodpoyr Sc Hsfx Agwsd Additional equipment • Tool measurement systems: Mechanical and laser (BLUM) Technical Specification Taper Size ISO 50

Condition: repair required (used), Year of construction: 2016, Manufacturer: EWAG AG Model: Laser Line Ultra Machine Type: 5-axis Laser Machining Centre Serial Number: 7195-0022 Release: 5 Hjdpfx Ajytrp Nsgwjfd Year of Manufacture: 2016 Laser Source: Coherent Hyper-Rapid 50 Laserhead Laser Manufacturer: Coherent Kaiserslautern GmbH Laser Manufacturing Date: 28.01.2016 Laser Classification Machine: Laser System Class 1 according to DIN EN 60825-1:2008-05 Axes: X, Y, Z, B, C CNC Control: Fanuc 31i-5 Control Operating Voltage: 3 × 400 VAC / N / PE Frequency: 50 Hz Control Voltage: 24 V DC Rated Current: 17.3 A Connected Load: 12 kVA Max. Fuse Protection: 25 A (slow-blow) Wiring Diagram Number: 100211907 Extraction System: ULT LAS 200 Extraction System Documentation: complete Operating Hours: 35,788.02 h Note: Laser unit is defective and must be replaced Robot currently removed and being overhauled, optionally available Inspection under power possible

Condition: new, Year of construction: 2024, As PLC Merkezi Bulgaria, we provide industrial robotics and engineering solutions as well as custom positioner manufacturing according to your robotic application needs. We manufacture our positioners by using original reductors, drives and motors that are compatible with your or our ABB, KUKA or FANUC robots. Hfsdpfx Agerlm D Eowjd Please contact us for further information.

Condition: used, AWEA BM-1400 is a 4-axis machining center designed for precision, high accuracy and reliability. Table 1500×800 mm; travels X1400 mm, Y800 mm, Z700 mm. Spindle nose ISO 40, 0–12000 t/min (stepless), supply 50Hz 3x400V, total power 40 kVA; weight ≈12000 kg; size L4800×W2850×H3100 mm. Accessories: set of toolholders, high pressure coolant 40 bar, chip conveyor, dividing attachment 4th axis, electronic handwheel, RS‑232 interface, status light. Achieves tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Hodpfx Ajyr Hizegwefd

Condition: excellent (used), MAKINO V 33i Graphite is a 3‑axis machining center designed for precision, high accuracy and reliability. Capacities: table 750×450 mm with 4 T‑slots 18H8 at 100 mm, table load 300 kg; travels X650 Y450 Z350 mm; workpiece max L750 W635 H250 mm. Specs: spindle HSK E50 (nose–table 150–500 mm), stepless 300–30,000 t/min, torque 23.1 Nm; spindle power 17/13 kW; feed 1–20,000 mm/min, rapid 20 m/min; tool magazine 60 places, tool Ø max 80 mm, length 250 mm, tool change 4.8 s; 3×400 V 50 Hz, air 4–8 bar; machine ≈7700 kg, footprint 2330×2325×2600 mm, installed power 50 kVA. Accessories: lamp, oil‑mist extractor, spindle cooling, EROWA EASY ROBOT loader, status light. Achieves tight tolerances; suits automotive, watchmaking, tooling, aerospace and medical applications. Hodpfx Ageyr Hh Rowsfd

Condition: excellent (used), Year of construction: 2003, I sell the 3-axis CNC working centre SCM SCM RECORD 110, year 2003. Configuration: Hfsdpfxjhhruhs Agwed 3-axis main spindle SCM 6,6kW 24.000 rpm Tool magazine 8 positions ISO30 on working head Useful working area 2690x940 x Z 150mm (300mm). 2 working fields, 4 clamping areas - Flachtisch Automatic central system of lubrication. Pump BECKER 5,5KW 244/286 m3/h. fast neu. Gewicht 3200kg Xilog Plus new software controller with full instructions ! Very good condition. Available immediately.

Year of construction: 2014, condition: excellent (used), Elumatec SBZ 130 is a 3-axis profile machining centre designed for efficient processing of aluminium, steel, and stainless steel profiles. All operations, such as milling, drilling, and tapping, are performed on a stationary profile, which protects its surface. Axes: 3-axis control, with tool spindle as an additional axis. Machining length (X-axis): 7200 mm Travel (Y-axis): Typically 485 mm (max. 60 m/min). Travel (Z-axis): Typically 340 mm (max. 60 m/min). Hfsdpfx Asyt H Uyogwsd Spindle speed: Standard 6000 rpm or optionally high-speed spindle (18,000 rpm). Spindle power: 5.5 kW. Tool magazine: Integrated 8-position turret or 4 angle heads, ensuring short tool changeover times. Control: Windows operating system with eluCam software. 18.5” PC panel with USB ports and network connection. Clamping system: Automatic positioning of pneumatic clamps. Compressed air supply: 7 bar. MACHINE: Prepared tooling dedicated for PVC+STEEL machining: - tool holders, - reducer for steel machining, - special tools with chip breaker, - dedicated programs for machining door profiles,

Condition: excellent (used), Year of construction: 2014, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 167 Nm, overall weight: 35,000 kg, Initial commissioning: December 2014 Control system: Fidia X-axis: approx. 2,200 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,200 mm A-axis: ± 100° C-axis: ± 275° Machine operating hours: approx. 68,000 h Total spindle hours: approx. 26,500 h Clamping table: 2,000 x 3,500 mm with T-slots 2-axis fork milling head Spindle power: 70 kW Spindle speed: max. 15,000 rpm Torque: max. 167 Nm Tool holder: HSK 100A Tool clamping: hydraulic Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Connection data Voltage: 400 V Frequency: 50 Hz Dimensions, weights Required space for machine without peripherals: approx. 8,000 x 6,000 x 5,000 mm Total weight: approx. 35,000 kg Additional equipment - Coolant system - 26-place tool changer - Work area enclosure - Chip conveyor Available at extra charge: - Wireless touch probe - BLUM laser Hfjdpfx Agjyrc Akewsd Condition of the machine Fully operational, very good condition. Can be inspected under power.

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis DECKEL MAHO 64 V linear was manufactured in 2002. It features an SK40 tool holder and a 30-tool automatic tool changer. The machine includes a paper band filter. Note, the probe requires servicing due to a communication error. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO 64 V linear machine we have for sale. Contact us for more information. • ATC capacity: 30 tools Additional equipment Hjdpex D E Hhefx Agwefd • Paper band filter (coolant filtration) • Probe (needs service; communication error) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of axes: 4, This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It features a Siemens 840D Powerline control, VDI 40 tool holder, Y-axis, chip conveyor, and a counter spindle. The machine has been fully overhauled by Eichten Werkzeugmaschinen GmbH, ensuring it is in perfect condition. If you are looking to get high-quality turn-mill capabilities, consider the DMG CTX 420 Linear V6 machine we have for sale. Contact us for more information. Additional equipment • PCU 50 • Y-axis • KSA pump • Hollow clamping cylinder 65 mm • Counter spindle with ejector cylinder • Parts catcher • Discharge conveyor • Sauter star turret with angled tools • Preparation bar loader Machine Benefits Technical Machine Benefits • In the event of sale, some tool holders, including driven tools, would also be sold. Extra Information Hjdpfx Aox D R Hgsgwsfd The machine was completely dismantled, cleaned, checked for all functions, and overhauled by Eichten Werkzeugmaschinen GmbH in December 2023 before it was put into operation. It is therefore technically in perfect condition.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) Hfedpfx Agsx Nr Tuswod -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L Hjdpsymcvmsfx Agwefd • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve • Rotating viewing window / work area door • Flushing gun with pump • Double gripper • Wheel magazine • NC rotary table Ø 630 mm • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction • Tool breakage check mechanical design Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 Hfedpfeyi Ekfox Agwed • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 • Mpc machine protection control (machine protection through rapid shutdown) • Laminated glass safety pane for right-hand cabin door window Extra Information Documentation and Electrical circuit diagram (German) available

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,504 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 110 mm, overall weight: 20,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D Powerline, number of axes: 7, This 7-axis DMG Gildemeister GMX 400 linear was manufactured in 2004, featuring a maximum turning diameter of 640 mm and a turning length of 1,585 mm. It includes a Sinumerik 840D Powerline control, a milling spindle with a max speed of 12,000 rpm, and a tool magazine with up to 120 positions. If you are looking to get high-quality turn-mill capabilities, consider the DMG Gildemeister GMX 400 linear machine we have for sale. Contact us for more information. Additional equipment • Oil mist extraction • Coolant tank with belt filter system • Internal coolant system with 80 bar pressure • Approx. 30 tool holders Machine Benefits Technical Machine Benefits • Drive power - main spindle: max. Torque 600 nm • B-axis: +/- 120° • C-axis resolution: 0. 001° and 1° • Maximum turning diameter: 640 mm • Turning length: 1585 mm • Standard turning diameter: 400 mm Hedpfx Ajx D S Dgsgwefd • Distance between centers of main spindle: max. Bar diameter 90 mm • Chuck diameter: 250 mm (max. 400 mm) • Number of tool positions: 12 positions • Turret tool holder: 40 mm din 69880 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2011, operating hours: 35,000 h, number of axes: 3, This 3-axis CONCEPT LASER M3 Linear was manufactured in 2011. It features a robust power supply with a total consumption of 7.4kW, supporting a laser system, IT, and control voltage components. Essential for operations requiring compressed air and nitrogen, it ensures a steady flow and pressure. Ideal for precision metal 3D printing. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Machine connection: cee plug, 400v 32a 6h, 3-meter cable • Compressed air: pressure: 7-8 bar, unlubricated • Flow rate: 130 l/min • Machine connection: coupling plug nw 7. 2, 3-meter fabric hose • Nitrogen n2: pressure: 5 bar, purity: >2. 5 • Flow rate: 100 l/min • Machine connection: hose nipple with sealing cone - 60° cone, 3-meter fabric hose Extra Information Hfjdpfx Agsx Nh Rcowed Power supply: Supply voltage: 3P/N/PE AC 400V, 10%, 50Hz-60Hz Fuse: 32A Power consumption: Laser system: Max. 34kW IT: 05kW Control voltage: 05kW NC (incl. axes): 10kW Extraction: 12kW Air conditioning unit: 08kW Total: 74kW

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, controller manufacturer: HEIDENHAIN, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. • Tool magazine: 60 tools • Through-spindle coolant (IKZ): 40 bar • Spindle overhauled in 2024 • B and C axes overhauled in 2024 Additional equipment • Automation (product handling), freely adjustable for product format and positioning • Paper belt filter • Blum laser tool break detection Hfodpfx Agsx Rd Hpowsd • Extraction system excluded Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,960 h, controller manufacturer: HEIDENHAIN, number of axes: 2, This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information. Additional equipment • Bar package with a pick-up device and parts conveyor belt • Bar guide for 1.5 metre bars and workpiece stop • Hainbuch SK 65 clamping top • Indicator light for machine's operating status • Cooling unit for air conditioning the control cabinet • OPTIONAL: A basic tool kit / A large selection of Hainbuch SK 65 clamping heads Hfsdpfx Agox Nr T Uowjd Machine Benefits Technical Machine Benefits • 12-position tool turret with driven tools at all stations Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,395 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, This 3-axis Gildemeister CTX 620 linear was manufactured in 2007. A horizontal turning machine, it includes tool holders and a tail stock. Consider the opportunity to buy this Gildemeister CTX 620 linear horizontal turning machine. Contact us for more information. Siemens 840D with shopturnSpindle with integrated motorTailstockChip conveyorSpray gunAutomatic doorHollow clamping cylinder SMW 121 mmSMW Autoblok 400 BHD-FL ø 118 hollow Hfedpfxex Stlqe Agwjd Additional equipment • Tool holders (as shown in pictures) will follow • Tailstock will follow

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: HEIDENHAIN, controller model: Plus IT 3D CNC Pilot 4290 plus it, number of axes: 7, This 7-axis DMG GILDEMEISTER GMX 250S Linear was manufactured in 2008. A turn-mill centre featuring the advanced Heidenhain Plus IT 3D CNC Pilot 4290 control unit, it represents the pinnacle of turning and milling capabilities. Contact us for more information. • Control unit: Heidenhain Plus IT 3D CNC Pilot 4290 plus it • 4th axis with tailstock (special feature) • Tool magazine with 22 tool positions (optional) • Description: The pinnacle of turning and milling! Additional equipment Hedpfx Agjyfv Rbewsfd • Chip tray

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details. • A-axis rotation: +90° / -120° • C-axis rotation speed: 800 rpm • Distance table–spindle nose: 160–760 mm • Rapid feed (all axes): 50 m/min • C-axis table diameter: 630 mm • Max workpiece size (D × H): 830 × 550 mm Hfodoyia Tljpfx Agwjd • Tool magazine: 64 positions (expandable to 166) Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2013, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, total height: 3,355 mm, total length: 5,250 mm, total width: 3,573 mm, table length: 3,500 mm, table width: 820 mm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 35 rpm, table load: 2,500 kg, Equipment: documentation/manual, CNC Control Mazatrol Matrix 2 Table size 3500 x 820 mm Hodpfxoytb Tqj Agwefd Table load 2500 kg Number of pallets 1 Movement X-Y-Z-axis 3000 - 800 -720 mm C-axis (table rotation) 0,0001° B-axis travel ± 110° Spindle speed 35 - 18.000 R/min Spindle taper HSK-A63 Spindle motor 35-26 kW Magazin capacity 30 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2006, DMG DMC75V linear, machining center, 5 axis Year: 2006 x-travel 885 mm y-travel 600 mm z-travel 600 mm control iTNC 530 Heidenhain Max. rpm 1 - 28.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 119 / 85 Nm tool taper HSK A63 Swivel range milling spindle B: -10° / +110° ° spindle bearing diameter 80 mm table diameter 750 mm rotation range C: 360 ° rotary speed max. 100 min/-1 max. table load 600 kg feed speeds 1 - 90.000 mm/min rapid traverse 90 m/min Feed force X/Y: 13,8 kN Feed force Z: 10,35 kN number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 140 mm Hedeytd E Nopfx Agwsfd max. tool length 300 mm max. tool weight 10 kg max. workpiece height 460 mm Max. Workpiece Area ca. 750 x 600 mm passage max. 600 mm total power requirement 60 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,5 x 4,5 x 3,0 m Accessories/options: - including Fanuc robot - including palettizing system - 28000 rpm Kessler spindle - Through spindle coolant - Swarf conveyor - Clamping system Vice with jaws - full set of manuals

Condition: used, machine/vehicle number: 008167, X axis working area: 6000 mm Y axis working area: 1750 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 30 Total number of tool changer positions: 72 Hfedpfsx A Hczsx Agwod