Used Liquipoint T Ftw31 for sale (71,099)

Condition: excellent (used), Year of construction: 2003, overall weight: 8,200 kg, total height: 450 mm, total length: 5,370 mm, total width: 2,100 mm, plate height: 450 mm, plate width: 2,100 mm, groove spacing: 300 mm, Floorplate Length: 5370mm Floorplate Width: 2100mm Height: 450mm No. Of T-slots: 7 Distance from T to T-slot / Jump:300mm T -slot size: 41mm Weight a plate approx.: 8200kg Number of matching pieces: 1 Length: 5370mm Codpfx Ajyg Igdsbpsgn Width: 2100mm Height: 450mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), overall weight: 6,000 kg, total height: 400 mm, total length: 4,510 mm, total width: 1,815 mm, plate height: 400 mm, plate width: 1,815 mm, Floorplate Length: 4510mm Floorplate Width: 1815mm Height: 400mm No. Of T-slots: 6 Distance from T to T-slot / Jump:285mm T -slot size: 36mm Weight a plate approx.: 6000kg Number of matching pieces: 1 Length: 4510mm Width: 1815mm Height: 400mm Weight: 6000kg Cjdpeyg Icrefx Abpjgn Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, overall weight: 6,000 kg, total height: 310 mm, total length: 3,985 mm, total width: 2,010 mm, Floorplate Length: 3985mm Floorplate Width: 2010mm Height: 310mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 6000kg Number of matching pieces: 2 Length: 3985mm Width: 2010mm Height: 310mm Cgsdpfeyg Hx Esx Abpon Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, total height: 350 mm, total length: 5,100 mm, total width: 1,500 mm, T slotted bed plate STOLLE - Cast iron Floorplate Length: 5100mm Floorplate Width: 1500mm Height: 350mm No. Of T-slots: 5 Distance from T to T-slot / Jump:300mm Cjdpfxexdwwfe Abpogn T -slot size: 28mm Weight a plate approx.: 5800kg Number of matching pieces: 1 Length: 5100mm Width: 1500mm Height: 350mm

Condition: good (used), Year of construction: 2010, operating hours: 72,154 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, warehouse no.: 503576 manufacturer: ARBURG type: Allrounder 900 T 800-150 controller: year of construction: 2010 operation hours: 72154 h clamping force: 800 kN distance between tie-bars h x v: 900 x 900 mm min. mould height: 250 mm max. open daylight: 550 mm opening stroke: 300 mm round table diameter: 900 mm screw diameter: 25 mm Cedpfxsygv R Re Abpjgn swept volume: 54 ccm injection pressure: 2500 bar equipment included: screen text german air valve 1x machine with rotary index table machine incl. water flow regulator Anti vibration mounts Operation Data Acquisition measures of machine l x w x h: 3.8m x 1.85m x 2.15m total weight: 5000KG

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Cgsdpfswugczsx Abpsn Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, mileage: 79,000 km, power: 96 kW (130.52 HP), first registration: 03/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,000 mm, loading space length: 3,300 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Quickly and easily contact our sales advisor. Attention! Preference given to sales to commercial customers. Internal ID number: [ 3142 ] ----Optional add-ons: * 12–64 months warranty (valid EU-wide) * New inspection * New TÜV & emissions test * Nationwide delivery * Financing possible with no down payment * Spring offer: Upon request and for an additional charge of only €999, increase in towing capacity up to 3,500 kg (depending on vehicle and manufacturer). ----Vehicle highlights: * 19% VAT deductible * 1 owner * Immediately ready for use * Euro 6 emissions standard * Long wheelbase + high roof * Air conditioning * Rear ladder + roof rack * Towbar * Cruise control * Bluetooth multimedia function Cedpfxjygqklj Abpogn * Reversing camera * Load compartment lined with wood * 3-seater * Bluetooth function Special equipment: Cargo area LED lighting, Visibility package 2, Interior paneling in cargo/passenger area: high Additional features: 3rd brake light, overhead storage compartment in cab, driver's airbag, traction control (ASR), audio system: radio/CD player with multi-function display, electrically adjustable & heated exterior mirrors, indicator integrated in exterior mirrors, flooring: vinyl in cargo/passenger area, onboard computer, headliner in passenger compartment, tachometer, electronic brakeforce distribution (EBD), electronic differential lock (EDS), hill-start assist, 165 A generator, B-pillar grab handle, rear wing doors without windows (180° opening angle), recirculating air heating, cabin pollen filter, body/superstructure: high roof panel van, body variant: medium-height roof, silver radiator grille, high bulkhead behind driver and passenger, adjustable steering column (height & reach), headlight beam adjustment, truck registration, engine 2.0L - 96 kW TDCi cat, front & rear parking sensors, production plant: Otosan, wheelbase 3750 mm, full wheel covers, spare wheel with road tyre, Euro 6 low emissions, right-side sliding door in cargo/passenger area, wide side impact guards (body side moldings), Seat Package 13: driver's seat (4-way adjustable) - front passenger twin seat, fabric trim, seats in cargo/passenger area: 1st row, 3-seat bench, steel wheels 6.5x16, partially painted bumpers, Trend, integrated rear step, tinted windows, second key with folding remote ----Interested in leasing or financing? We offer attractive options, with or without down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Notice: All information provided online is non-binding and for general vehicle description only. Errors, misprints and prior sale reserved. Final vehicle specification is determined solely by the purchase agreement on site or by written confirmation. Vehicles with mileage over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Fuji Film LUXEL T-6500CTP S Thermal Platesetter (2017) – B2 Format Technical Details and Equipment List: A. CTP PLATESETTER – LUXEL T-6500CTP S ● Technology: Thermal CTP ● Year: 2017 ● Laser Head: 32-channel (S Version) ● Productivity (B2): Up to 21 plates/hour at 2400 dpi ● Max Plate Size: 830 x 660 mm ● Min Plate Size: 324 x 330 mm ● Imaging Area: 830 x 636 mm ● Plate Thickness: 0.15 – 0.30 mm ● Resolutions: 2400, 2438, 2540 dpi ● Power Supply: 200/240 V, 47/63 Hz, Single-phase 35 A / 5 kW ● Weight: 830 kg ● Dimensions (L x W x H): 1985 x 1315 x 1300 mm ● Condition: Used, in daily production. Available for immediate inspection and testing. B. RIP & SOFTWARE SYSTEM ● RIP Processor: FujiFilm XMF PROCESSOR V6 4UP BUNDLE ● Functionality: RIP for B2 format, standard screening, HR/LR output, ICC/DLP/CIP3 support ● License: XMF DONGLE ONLY security key included ● Computer: Dedicated PC for XMF Gateway Cedpfx Absxm Td Hspogn C. PLATE PROCESSOR ● Model: FLH-Z 85CD ● Max Plate Width: 850 mm ● Min Plate Length: 285 mm ● Plate Thickness: 0.15 – 0.40 mm ● Developing Speed: 15 seconds (dip to nip) ● Developer Tank: 30 L ● Weight: 364 kg (dry) Commercial Information: ● Availability: Machine is active in production. Reason for sale is an upgrade to a larger format.

Condition: used, mileage: 3,56,000 km, power: 279 kW (379.33 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 6,750 mm, loading space width: 2,450 mm, loading space height: 600 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, Renault T 380 Platform 6,75 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 356 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 675 x 245 x 60 cm (L x W x H) CAPACITY: 13 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 525/135 cm TIRE SIZE: 315/70R22,5 FRONT : SPRING BACK : AIR CRANE: HIAB 111 B - 2 HIDUO + REMOTE CONTROL TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO Cgjdpfx Ajyg Ag Eobpon SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 0727

Condition: excellent (used), CTS Temperature Test Chamber We offer you here a CTS temperature test chamber. Water-cooled Model series: T-40/600 Including metal support bars to increase floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Nominal power: approx. 5.5 kW Nominal current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Cgjdpfx Aoygup Sobpsn Type: T-40/600 /011232 Important information for you as a buyer! The following steps are carried out on all our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refilled with legally-compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored by calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the data!) If you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Temperature Test Chamber We are offering you a CTS temperature test chamber. Water-cooled CTS Temperature Test Chamber Technical specifications: Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 3.5 K/min Temperature stability, temporal: ≤± 0.3 K Dimensions: Test volume: 600 liters Test chamber internal dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Connected load: 8.2 kW, 14.2 A Refrigerant: R404A / R23 Weight: 600 kg Model: T-70/600 Important Information for Buyers! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Technical data, specifications, and information are subject to change and errors!) Cgjdpfx Asygupfobpen If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Cedpfx Aboygultepsgn Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: used, Year of construction: 2019, operating hours: 17,191 h, Type of fuel: LPG Empty weight: 2.706 kg Dimensions (LxBxH): 297 x 109 x 226 cm Lifting capacity: 1.600 kg Lift height: 522 cm Clearance lift height: 170 cm Cgodpfjyg Hhajx Abpen Fork dimensions: 1.150 x 910 mm - Year: 2019 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 517314V00020 - Operating hours: 17191 - Lifting capacity: 1600kg - Lifting height: 5220mm - Overhead clearance: 2260mm - Free lift: 1700mm - Fork length: 1150mm - Maximum fork width: 910mm - Minimum fork width: 200mm - Number of wheels: 4 Wheels - Attachment: 4th valve to fork carriage, Side-shift - Options: Work lights, Heating, Free-lift, Non-marking tires, Full cabin - Mast: Triplex - Inspection valid until: 05-2026 - Drive: LPG - Motor brand: Still VW - Transport dimensions: 2975mm x 1099mm x 2260mm (l x w x h) - Transport weight [kg]: 2706kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: MV0098-000226, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 56 m/min, nominal power (apparent): 16 kVA, controller manufacturer: FANUC, workpiece weight (max.): 200 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 200 h, number of slots in tool magazine: 21, tool diameter: 200 mm, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in perfect condition, with only 200 spindle hours since new. It never had a collision. It is possible to inspect the machine under power and verify its geometry. Free packaging and loading on truck. Cgsdpfxjxpuwme Abpen Included in the package: 3D probing system Tool measurement probe (the stylus is damaged — we can replace it) Through-spindle coolant (TSC) Chip conveyor 21-tool magazine

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,200 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,200 mm, low bed approx.: 6,000 mm long, loading height incl. approx. 890 mm, 22 lashing eyes each 10 t, 10 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the sides, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, price: 500 ¤, , hydraulic displacement of the ramps, price: 1,000 ¤, , excavator trough, price: 1,000 ¤ net, , , --  Misprints, errors and changes reserved, sample- Pictures --, More data at: !, More Details: ! Csdpfoyf Dlmsx Abpjgn

Condition: used, empty load weight: 3,380 kg, maximum load weight: 10,120 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 05/2012, loading space length: 6,350 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 400 mm drop sides, front for through-loading, 4 x lashing eyes, 18 x lashing eyes, wooden floor def., , Sale is via customer, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Cgedpfx Aboyf Dixspsn

Condition: new, empty load weight: 6,950 kg, maximum load weight: 24,050 kg, overall weight: 31,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, 12 stake pockets, 2 ramps each 3,110 mm long x 760 mm wide, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators. Surcharges: last axle as steering axle: €3,500; warning signs + lighting and beacon: €200; widening to 3m with wooden planks: €300; hydraulic ramp shift: €1,000. Also available with K80 towing eye! -- Errors, omissions and changes excepted, sample images -- More data at: !, More Details: ! Csdsyf Dilepfx Abpjgn

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 9,000 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 16 x stake pockets in the outer frame, drive-on ramps (approx. 3.000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1.100 ¤, hydraulic 1-piece ramps 500 ¤, Also with 8.10 m loading area length + widening in stock , , , , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Cgjdpsyf Dhnefx Abpsn

Condition: used, empty load weight: 7,300 kg, maximum load weight: 37,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 03/2019, suspension: air, tire size: 235/75R17,5 --/140J, color: other, gearing type: other, front tire size: 235/75R17,5 --/140J, rear tire size: 235/75R17,5 --/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Reinforced design, length of high bed approx. 4,180 mm, length of low bed approx. 9,400 mm, loading height approx. 900 mm, 12 x stake pockets in the outer frame, 3 x cross stake strips, 14 x lashing eyes, 4 pairs of container locks for, 2 x 20 ft. ISO containers or 1 x 40 ft ISO container, , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Cgodjyf Dhhjpfx Abpen

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,600 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 980 mm, 20 x lashing eyes each 6 t, 20 x lashing brackets each 6 t, 18 x lashing holes, 7 x stake pockets, central, 14 x stake pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, plug-in price: 1,500 ¤, surcharge for extendable drawbar price: 1,500 ¤, surcharge for 4 x warning signs with lighting price: 800 ¤, , Also available in loading area length 8,600 mm!?, , , , , --  Misprints, errors and changes excepted, sample images --, More data at: !, More details: ! Cjdpfx Aboyf Dhbjpogn

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions can be plugged in, geared support winch with load and fast gear, front, mounting shaft for two aluminum drive-on ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , -- Misprints, errors and omissions excepted, sample images --, More data under: !, More Details: ! Cgodpfjyf Dgksx Abpon

Condition: new, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,120 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, side walls 600 mm high, galvanized, loading height approx. 990 mm, 4 x lashing eyes in the floor, 5 tonnes each, 8 x lashing eyes in the floor, 3 tonnes each, reinforced geared support winch with load and fast gear at the front, ?Wide tires: 385/55 R 19.5, Chassis: hot-dip galvanized, , Surcharge for:, aluminum ramps (approx. 3520 x 400 mm), load capacity per pair 10 tonnes and 2 folding supports at the rear, Price: 1500 Euro,   , , --  Subject to printing errors, errors and changes, Sample images --, More details at: !, More details: ! Cgsdpfx Aeyf Dgdebpjn

Condition: used, empty load weight: 3,500 kg, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 08/2018, loading space length: 7,200 mm, loading space width: 2,470 mm, suspension: other, tire size: 205/65R17,5 ---/126J, color: other, gearing type: other, front tire size: 205/65R17,5 ---/126J, rear tire size: 205/65R17,5 ---/126J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 600 mm side walls, front wall 1,200 mm high, loading height approx. 850 mm, twin tires, 10 x lashing eyes, customer vehicle, , --  Subject to printing errors, mistakes and changes, sample images --, More data at: !, More details: ! Csdsyf Dg Ropfx Abpsgn

Condition: new, empty load weight: 4,580 kg, maximum load weight: 14,420 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, loading space height: 1,100 mm, loading space volume: 15 m³, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading area approx. 5,700 mm x 2,420 mm, 600 mm drop sides + 500 mm extension drop sides, hot-dip galvanized drop sides, loading height approx. 1.080 mm, 12 x lashing eyes in the floor, reinforced gear support winch with load and fast gear at the front, 2 times folding supports at the rear, 435/50 R 19.5, , Chassis and tipper body hot-dip galvanized, , Surcharge for:, Aluminium ramps , Price: 1,600 Euro, , -- Misprints, errors and omissions excepted, Sample pictures --, More data under: !, More Details: ! Cedpfx Ajyf Df Hjbpjgn

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Cgjdpfx Aoyf Dftobpsn