Used Log Bandsaw Mill for sale (11,780)

Condition: good (used), Used milling machine from Universal Mill Kdodeyu Ic Uopfx Abcji

Condition: like new (used), 1 unused universal vertical milling head suitable for an ORADEA / EURO-MILL FUS 32 Design: “MAHO”, ISO 40 taper, quill stroke 100 mm, rated drive power approx. 3-4 kW, max. speed 2000 rpm, … Special accessories: - Multiplicator, gear ratio 1:4, ISO 40 taper Price: 499.00 EUR - Attachment for automatic feed device for vertical milling head quill, “MAHO” system, 6 feeds 0.02 - 0.2 mm/rev Price: 1,880.00 EUR - Horizontal milling head, auxiliary head for vertical milling head with ISO 30 spindle taper, swivels 360 degrees Price: 585.00 EUR Kdsdpfx Absddtwbscoi Plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Universal Tool Milling Machine ORADEA EURO-MILL STIMIN (Romania) Model FUS 32 Serial No. 5591 Year of construction: 2009 Travel: X: 560 mm, Y: 320 mm, Z: 400 mm Kdjdex Hkd Hjpfx Abcji Table size: 950 x 450 mm Tool holder (vertical head): ISO 40 - M16 Tool holder (horizontal spindle): ISO 40 - S20x2 (Deckel-compatible) Spindle speed: 25-2000 rpm, 18 steps Feed rate: 5-400 mm/min, 18 steps Rapid traverse: 1400 mm/min Main spindle motor power: 3 KW Electrical connection: 400 Volt, 50 Hz, 10 KW - 3-axis digital readout and linear glass scales by HEIDENHAIN, type ND 780 - Vertical milling head with quill, swivels +/- 90° - Quill travel at vertical head: 100 mm - Manual tool clamping with M16 thread - Counter bearing for horizontal milling with Ø 48 mm bearing bush - Central lubrication - Electrical control cabinet mounted on machine side - Coolant system integrated in machine base - Machine lamp - Including 2 tool holders - Operating manual with electrical diagram Required space (L x W x H): 1800 x 1600 x 1800 mm Weight: 1650 kg Very good condition

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1083252, Machine Specification Table size 914mm x 305mm X axis traverse 406mm Y axis traverse 305mm Z axis traverse 254mm Spindle BT 40 Spindle speeds 0-10,000rpm Spindle motor 11.25kW Rapid feed rate 30.5m/min Toolchanger capacity 10 tools Approximate weight 1542kg Ksdoyt Hknepfx Abcjdi   Machine Equipped with:- HRT 160 4th axis Rapid tapping Coolant system Lighting Guarding

Condition: good (used), Please read the technical specifications carefully. If the machine is a potential investment for you, we kindly ask that you provide full identification with a correct telephone number and email address before we can issue an offer. LOG-O-MATIC (Mainaschaff/Germany) Surface Grinding Machine FS 5030 AH Year of manufacture: 4/1991 Kdsdsxz R Nijpfx Abcei Grinding area: approx. 500 x 300 mm Automatic vertical feed Manual longitudinal, cross, and vertical feed Accessories/Features: - Electromagnetic chuck approx. 500 x 300 mm - Manual wheel dresser on the carrier - Paper band filter - Coolant system - Machine lamp - Machine feet Additional accessories: - Side-, angle-, and radius dressing device - Balancing scale - Demagnetizing plate The machine is in very good condition and comes from a training facility. Available from March 2026.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 26956, Specification Table size 914mm x 305mm X axis traverse 406mm Y axis traverse 305mm Kdodjwkrq Ajpfx Abcji Z axis traverse 254mm Spindle BT 40 Spindle speeds 0-6000rpm Spindle motor 5.6kW Rapid feed rate 15.2m/min Toolchanger capacity 10 tools Approximate weight 1542kg   Machine equipped with:- Haas CNC Control System Coolant system Lighting Enclosed guarding Manual

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm Kdjdob A Ihdepfx Abcji -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 4.5 kg

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Kjdpfxjxiv Ugo Abcsdi Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Kdsdpfx Abexlfwpscoi Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, functionality: fully functional, The ASM 6-30 is a high-speed tooth setter for band saw blades, making it perfect for companies that use different volumes of bandsaw / sawmill blades per day. The machine is very user-friendly and easy to set up, making it the ideal solution for a wide variety of customers with different experiences in the industry. Voltage - 220V Frequency - 50Hz Power - 220V Secondary voltage - 24V Blade width - 15mm-60mm Tooth pitch - 6-30mm Accuracy - +- 0.04mm Blade thickness - 1.2mm Kdodpfoxivgcsx Abcsi Possible types of tooth set - left, right,straight/right,left,straight The machine is very user-friendly and easy toset up, making it the ideal solution for a wide variety of customers withdifferent experiences in the industry. Achieving precise tooth setting isessential for straight cutting and extended blade life, and our advancedclamping system delivers an impressive accuracy of 0.04mm. Capable of setting80-120 teeth per minute, the ASM 6-30 enhances your company's efficiency andensures a smooth workflow.

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Kdodpfx Ajxliguebcji Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: Kodpfx Abop T Twujcedi The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Maximum Inlet Wire's Diameter: 30 mm Kodpfx Ast Ixkzobcsdi

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m Kedpfxju Smq Sj Abcodi - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: new, Year of construction: 2023, Hammer Mill with electrical box and cyclone filter for sale. The machines has a CE certificate. Technical parameters: Electric motor power: 45Kw Capacity: 1500-2000kg/hour Ksdpjxf Nw Hsfx Abcedi Machine size: 1750mmx900mmx1550mm. Weight 1300kg. Located Locally in Hungary (EU)

Condition: excellent (used), 1 x AEW 350 Bandsaw - full working order. 415 Volts - 3 Phase. Heavy Duty - professional Machine. Kdodpfx Absx Swy Escsi

Condition: good (used), Year of construction: 2013, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, spindle speed (max.): 8,000 rpm, table width: 406 mm, table length: 1,372 mm, rotational speed (max.): 8,000 rpm, overall weight: 3,100 kg, space requirement width: 2,280 mm, space requirement length: 2,900 mm, space requirement height: 2,550 mm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis: 1.000 mm Y-axis: 500 mm Z-axis: 530 mm Table size: 406 x 1.372 mm Spindle nose: BT 40 Spindle speeds: 1 - 8.000 rpm Controller: Fagor Featured with: - Cooling unit - User Manuals Country of origin: Taiwan Motor power: 10 HP Machine LxWxH: 2.900 x 2.280 x 2.550 mm Machine weight: 3.100 kg Kodpjvpl I Tefx Abcedi

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Kdodpfecr Ru Dex Abcsi Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, BOB-Mill M8 Model/Mold Making Engraving and Milling Center in Gantry Construction Kedpfexv Su Nox Abcedi TECHNICAL DETAILS X-axis travel: 700 mm Y-axis travel: 800 mm Z-axis travel: 330 mm Spindle speed: 27,000 rpm Control unit: Mitsubishi E 80 Spindle nose to table: 110 – 440 mm Door width: 760 mm Worktable size: 800 x 600 mm Table load capacity: 400 kg Number of T-slots: 5 T-slot size: 18 mm T-slot spacing: 115 mm Spindle taper: BT30 12-position tool changer Feed rate: 0–10,000 mm/min Rapid traverse X / Y / Z: 15,000 mm/min Positioning accuracy: ± 0.005 / 300mm Repeatability: ± 0.003 mm MACHINE DETAILS Spindle motor power: 7.5 kW 3-axis motor power X / Y / Z: 1.5 x 1.5 x 1.5 kW Machine weight: 4,300 kg Dimensions: 2,000 × 2,500 × 2,400 mm

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Kdsdpfxowi S Ixj Abcoi Location: Europe

Condition: excellent (used), Kolbe stainless steel bandsaw Heavy duty roller table used for carcass's Model K430 H Table size 1,050 mm front to back Kdodsxpfluepfx Abcsi Width 830 mm Maximum cut height 480 mm Safety interlocked doors Braked motor 4 Kw

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 18i MB5, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 500 mm Travel Z-axis: 550 mm Main Spindle Type: HSK-A63 Max. speed: 20,000 rpm Turning Spindle Collet Chuck: Hainbuch SK65 BZI Kdjdpfxoyn Ncpe Abcoi Max. speed: 4,000 rpm Bar capacity: approx. 65 mm MACHINE DETAILS Control: Fanuc 18i MB5 Drive power min.: 30 kVA Drive power max.: 50 kVA EQUIPMENT Tool measuring system: Blum Laser Control NT Additional magazine (92 tool stations) Coolant system / Paper band filter / High-pressure internal coolant supply (IKZ) Spindle chiller Bar feeder: Breuning RBK 10012 Inserts: 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, Max. diameter: 60 mm Please note: No oil mist extraction, no CO2 extinguishing system included. Machine disassembly will be carried out by Chiron on 24.03.2026. Chiron will also perform a data backup.

Condition: repair required (used), Year of construction: 2014, operating hours: 23,000 h, functionality: not functional, machine/vehicle number: 21066714, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: Siemens Sinumerik 840D sl, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control model: Siemens Sinumerik 840D sl Operating hours: 23,000 h EQUIPMENT Swiveling spindle External cooling unit (manufacturer: Pfannenberg) Note: There is a fault in the control system. It does not respond to any inputs. Repair by Siemens Service is required! Kdjdpjyq Ra Uefx Abcji

Condition: ready for operation (used), Year of construction: 2008, operating hours: 53,216 h, functionality: fully functional, machine/vehicle number: 22024211, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Kodpfx Abeyq Nx Necjdi Control model: BWO CNC Operating hours: 53,216 h EQUIPMENT 5 compact clamps (Model: Kopal Duo) Custom machine enclosure Swiveling spindle External chiller (Manufacturer: Pfannenberg, cooling capacity: 1.7 kW)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 73,695 h, functionality: fully functional, machine/vehicle number: 22021508, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: BWO RC, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Ksdpfxeyq Nx Ao Abcedi Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse speed X/Y-axis: 60 m/min Rapid traverse speed Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control unit: BWO RC Operating hours: 73,695 h EQUIPMENT Swiveling spindle Coolant system (MMS) External chiller unit (Manufacturer: Maka) New ball screw for Z-axis, installed by Maka Service in 2024