Used Lumber Planer for sale (1,648)

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Ppsdpjx Iugusfx Afhjl Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: used, x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 10 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min Ppsdpfsvkit Aox Afhjl vertical adjustment of cross beam 3682 mm rapid traverse 1,5 m/min creep feed 1,25 und 12,5 mm/min feed stepless 5 - 1500 mm/min table-size 17800x2800 mm column daylight 3600 mm Control SIEMENS 840 C table load 50.000/100.000 kg drive of main spindle 100 kW total power requirement 170 kW weight of the machine ca. 300 t dimensions of the machine ca. 40 x 8,4x 8,6 m + electrically renewed including cabinet, cabling and motors and equipped with a SIEMENS 840 C in 1999. + incl. 16 milling heads and ls the drive of x-axis consists of one hydrostatic screw with hydrostatic rack

Condition: good (used), Year of construction: 2007, SCM Compact XL four-side planer - Italian production - year of production 2007 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm 1) horizontal, lower 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2nd and 3rd spindle) 11 kW 4) horizontal, top 230 mm 7.5 kW all spindles up / down, right / left spindle diameter 40 mm from the top 3 introducing rollers, metal, torsion, including 2 double top pulling roller, double rubber pressure 1 pc on the side a rubber pulling roller in the lower table top feed on cardan shafts pneumatic clamps smooth regulation of the feed speed 5-22 m / min 1.1 kW feed motor electric setting of the planing thickness Ppsdpfx Ajhrdmijfhsl 0.37 kW lifting motor the length of the introducing table top 2470 mm locked in the cabin central lubrication of the table top diameter of the extraction nozzle 150 and 180 mm dimensions (length / width / height) 3650/1200/1600 mm weight approx. 1500 kg

Condition: excellent (used), Year of construction: 2011, Four Side Planer SCM Compact NTE - after the technical review - Italian production - year of production 2011 TECHNICAL PARAMETERS: planing width 240 mm planing height 130 mm spindle diameter 40 mm spindle speed 6000 rpm 1 lower spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 lower spindle 5.5 kW six top pull rollers pneumatic pressure Ppjdpegyflcefx Afhel adjustable feed on the inverter feed speed range 5-25 m / min adjustable heads table top length 2480 mm electric brakes nozzles diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (length / width / height) 340/160/170 cm weight 2480 kg

Condition: good (used), Year of construction: 1990, Four-side planer REX HOMS-310 AD - German production - year of production 1990 - for wet wood TECHNICAL PARAMETERS: - planing width max. 310 mm - planing height on both sides 300 mm - planing height on four sides 100 mm - 35 mm spindle diameter - 2 x 11 kW shaft motors power - spindle motor power 2 x 7.5 kW - feed speed adjustable on the variator - feed speed 6-36 m / min - four upper pulling shafts - two lower pulling shafts - four auxiliary rollers in the table top - brake - minimum length of the element 600 mm Machine dimensions: - length 290 cm Pjdpfx Ashikpljfhspl - width 170 cm - height 210 cm - weight ~ 3500 kg

Condition: like new (used), Four-side planer REX HOMS-410 – German-made Ppjdpfxsrwl Dbo Afhel – Suitable for wet wood TECHNICAL SPECIFICATIONS: Max. planing width: 410 mm Planing height (two-sided): 200 mm Planing height (four-sided): 200 mm Spindle diameter: 40 mm Cutterhead motor power: 2 x 11 kW Spindle motor power: 2 x 5.5 kW Feed speed: steplessly adjustable Feed speed adjustable via frequency inverter Three upper feed rollers Three lower feed rollers Two auxiliary rollers on the worktable Brake Minimum workpiece length: 450 mm Machine dimensions (L/W/H): 250 / 220 / 180 cm Weight: ~3500 kg

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Ppsdpfxeibq Nie Afhol Machine dimensions 456x240x220 weight 4000 kg

Condition: used, Year of construction: 1988, Planing width: 860 mm, clearance height: 200 mm, minimum clearance height: 3.0 mm, bottom motor: 18.5 kW, top motor: 7.0 / 10.0 kW Pedevvkc Aopfx Afhspl Storage location: Nattheim

Condition: excellent (used), CATALOG NUMBER 7618 TECHNICAL DATA - shaft width: 500 mm - number of knives: 4 pcs - max thickness of workpiece: 230 mm top section: - anti-kickback fingers - toothed, feed, swivel, sequential infeed shaft - pressure rollers - planing shaft - pressure roller - smooth feed outfeed shaft bottom section: - 2 slip rollers in the table - motor: 5.5 kW - manual table height adjustment - 2 feed speeds: 7.5; 13 m/min - extraction port diameter: 160 mm - dimensions (L/W/H): 1100x1000x1200 mm - weight: 600 kg ADVANTAGES – made in Italy – original paint (not repainted) Ppjdjx Ttbzjpfx Afhjl – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2009, Year of manufacture: 08/2009 Commissioning: 03/2010 Control: Heidenhain iTNC 530 Technical Data: Tool holder: SK 50 Pedpfx Afjya U Uuehspl Tool changer: 30 stations Spindle speed vertical, stepless: 4400 rpm Spindle speed horizontal, stepless: 3500 rpm Cutting capacity: 440 cm³/min Positioning accuracy: +/- 0.005/300 mm Repeatability of the automatic swivel head: +/- 3' Machine table (LxW): 4000 x 2000 mm Travel paths X/Y/Z: 4230 x 2150 x 775 mm Max. workpiece weight: 11,000 kg Rapid traverse X/Y/Z: 12 / 15 / 12 m/min Motor power: 22 kW Dimensions (LxWxH): 10,130 x 4,510 x 4,250 mm Machine weight: 27,000 kg Scope of delivery: - Chip conveyor - Tool cabinet - Approx. 80 tool holders including tools

Condition: excellent (used), CATALOG NUMBER 7616 TECHNICAL DATA - Shaft width: 510 mm - 4-knife shaft - Table length: 2640 mm - Shaft guard - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable for angle - Motor: 4 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2640x1000x980 mm - Weight: 970 kg ADVANTAGES – German manufacture – Not repainted – Long tables – Used jointer – Very good condition Net price: 9900 PLN Net price: 2350 EUR at an exchange rate of 4.2 EUR (Prices may change with significant fluctuations) Pedpfx Afowbdn Uehepl

Condition: excellent (used), Catalogue number: 7715 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm Feed system (top): - 6 double-toothed infeed rollers, driven, + 1 single roller - 3 double smooth rubber outfeed rollers, driven + 3 single rollers - Digital length counter Feed system (bottom): - Swivelling toothed steel infeed roller integrated into lower table - 3 smooth steel feed rollers - Feed drive via Cardan rollers - Pneumatic pressure rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lifting motor: 0.75 kW - Centralised table lubrication - Extraction connection diameters: 5x140 mm, 3x120 mm - Machine dimensions (LxWxH): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg ADVANTAGES - Equipped with 8 cutterheads Podpfxsw Ipcvs Afhopl - Universal spindle - Ideal for wet and dry timber - Made in Germany, WEINIG brand - Unpainted (original finish) - Very low operating hours - Used thickness planer, like new Net price: 165,900 PLN Net price: 39,500 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7665 Technical data: - Shaft width: 510 mm - Planing shaft (2 knives installed), 4-knife shaft - Maximum thickness of material for thicknessing: 200 mm - Maximum thickness of workpiece on side heads (3-sided): 100 mm – From above: - Anti-kickback fingers - Serrated feed roller - Planing shaft - Pressure beam - Smooth outfeed roller – From below: - Adjustable rollers in lower table: 2 pcs - Guide bar - Lateral pressure from the side – From the rear: - 2 side spindles + pressure units - Spindle height: 100 mm - Maximum spindle spacing: 510 mm - Spindle diameter: 30 mm - Spindle adjustment: left/right - Motor: 2 × 1.5 kW - Two feed speeds - Main motor: 7.5 kW - Extraction port: 2 × 100 mm - Overall dimensions (L/W/H): 1800 × 1250 × 1000 mm - Weight: 1,070 kg ADVANTAGES – Made in Poland – 4-knife shaft – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR Ppedex Tplcepfx Afhsl (in case of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), CATALOG NUMBER: 7663 TECHNICAL DATA - Maximum planing width: 510 mm - Maximum planing height: 200 mm – Top section: - Anti-kickback fingers - Feed roller, toothed - Hold-downs, 2 rows - Infeed roller, toothed - Hold-down - Planing shaft, 510 mm, 4-knife, 7.5 kW motor - Hold-downs - Discharge feed roller, smooth - 2 outfeed pressure rollers - Smooth feed roller – Bottom section: Psdpjx Tphdjfx Afhepl - Hold-down - Adjustable infeed table with slip roller - Planing shaft, 510 mm, 4-knife, 5.5 kW motor - 2 smooth slip rollers - Side pressure roller – Rear section: - Side spindles: 1) Vertical right: 140 mm, 4 kW 2) Vertical left: 140 mm, 4 kW - Spindle diameter: 40 mm - Fitted cutterheads: 4-knife, height 120 mm - Spindles adjustable up/down, left/right - Stepless feed speed adjustment - Electric table elevation - Extraction port diameters: 3x150 mm, 1x110 mm - Dimensions (L/W/H): 2300x1700x1700 mm - Weight: 2,200 kg ADVANTAGES – Ideal for flooring processing – Electric table elevation – Manufactured in Czech Republic – Used planer in very good condition Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2005, x-travel 5.000 mm y-travel 3.100 mm z-travel 1.200 mm Control HEIDENHAIN TNC 530 HSCI Ppedpfoxcbiiex Afhol table surface area 5.000 x 2.000 mm T-slots 11 T - slots - width 22 mm table weight 30.000 Kg rapid traverse X-axis 20.000 mm/min rapid motion - y-axis 30.000 mm/min number of spindle speeds 6.000 U/min/rpm Spindle power 32 kW taper ISO Kegel ISO 50 distance between columns 2.800 mm Internal cooling system 20 bar weight of the machine ca. 65 t dimensions of the machine ca. 15.100x6.200x6.250 mm Head UAD II positioning 0.1º / 0. 1º Speed ranges 2 Tool clamping Hydraulic Head 2 – Vertical mandril ATC positions 30 2 longitudinal chip conveyors 1 cross chip conveyor Portable handwheel Laser tool presetter

Condition: excellent (used), Catalogue number 7832 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 pcs - max. thickness of processed element: 300mm - digital planing thickness display Ppedpfxjxzhxno Afhol – from above: - kickback fingers - sequential infeed roller - planing shaft - 2 smooth, driven, metal outfeed rollers – from below: - adjustable rollers in the lower table: 2 pcs - table on 4 screws - motor: 7.5kW - brake - electric table lifting - 2 feed speeds: 7/14m/min - feed motor: 0.75/1.1kW - extraction nozzle diameter: 160mm - dimensions (L/W/H): 1540x1220x1230mm - weight: 1300kg ADVANTAGES – Polish manufacture – electric table lift – sectional feed roller – used thickness planer, very good condition Net price: 32,900 PLN Net price: 7,840 EUR based on 4.2 EUR rate (Prices may change with significant variations in exchange rates)

Condition: used, Planer and Moulder Weinig Type Unimat 500 for four-sided planing and profiling of timber. The machine features a memory system with electronic positioning (axial and radial) of spindles 2-5. With groove bed, compact cabin, and in very good original condition. Including: * Knife sharpening machine such as Rondamat 931 * Centrolock planing heads * Profiling knives * Spare knives * Extensive accessories. spindle: 5 spindle 1: Bottom / 40 mm spindle 2: Right / 7.5 kW / 40 mm spindle 3: Left / common motor with right / 40 mm spindle 4: Top / 7.5 kW / 40 mm spindle 5: Bottom / 40 mm working width: 230 mm working height: 120 mm Control: Memory System Podpjya Hh Tjfx Afhspl

Condition: excellent (used), Catalogue number 7693 TECHNICAL DATA - shaft width: 810mm - max workpiece thickness: 170mm - 4-knife cutterhead * from above: - anti-kickback fingers - toothed feed roller, driven - pressure bar - planing cutterhead - pressure bar - smooth outfeed roller, driven - from below: 2 adjustable slip rollers in the table - electric table lift - 3 feed speeds - main motor power: 7.5 kW Ppedpox Thp Tsfx Afhol - dimensions (L/W/H): 1230x1600x1320mm - weight: 1360kg – Bulgarian made – 4-knife cutterhead – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on 4.2 EUR rate) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7662 TECHNICAL SPECIFICATIONS - max working width: 770mm - max working thickness: 200mm * top section: - toothed feed roller - ratchets - pressure - toothed feed rollers, 2 pcs - pressure - 4-knife planing shaft, 770mm, 7.5kW - pressure - smooth feed roller * bottom section: - adjustable infeed table - adjustable smooth feed roller - 4-knife planing shaft, 770mm, 5.5kW - 2 adjustable feed rollers in lower table - electric height adjustment Psdpox Thcmsfx Afhopl - lifting motor approx. 1.5kW - 6 feed speeds: 6, 9.5, 12, 15, 19, 30 m/min - feed motor 3.2kW - extraction port diameter: 1x160mm, 1x200mm - dimensions (L/W/H): 1470x1800x1700mm - weight approx. 2500kg ADVANTAGES – German-made – very good condition – used planer Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at exchange rate 4.2 PLN/EUR (if exchange rate fluctuations are significant, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7606 Technical data: - Shaft width: 500mm - Number of knives: 3 pcs - Shaft guard - Table length: 2530mm - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable at an angle - Motor: 3kW - Dimensions (L/W/H): 2530x1000x1100mm - Weight: 920kg ADVANTAGES – Made in Italy – 3-knife shaft – Used jointer – Very good condition Net price: 8,900 PLN Net price: 2,100 EUR Psdpsv Tczfefx Afhepl Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7736 TECHNICAL DATA - shaft width: 410mm - number of knives: 4 - noise-damping comb at the shaft - table length: 2530mm - brake - cast iron tables - both tables adjustable Ppsdpfxexdakuj Afhsl - original, angle-adjustable guide - motor: 3kW - extraction port diameter: 140mm - dimensions L/W/H: 2530x850x1350mm - weight: 680kg ADVANTAGES – manufactured in Poland – 4-knife shaft – brake – upper control panel – noise-damping comb at the shaft – DTR documentation – used jointer, in very good condition Net price: 12,900 PLN Net price: 3,070 EUR depending on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7835 TECHNICAL DATA - Shaft width: 410 mm - Noise-dampening comb - Number of knives: 4 pcs - Table length: 2500 mm - Cast iron tables - Both tables adjustable - Original angle-adjustable guide fence - Motor: 4 kW - Electric brake - Extraction port diameter: 125 mm - Dimensions (L/W/H): 2500x820x1210 mm - Weight: 910 kg Ppsdpfxex Armxe Afhjl ADVANTAGES – Made in Poland – Top control panel – 4-knife cutter block – Used jointer – Very good condition Net price: 15,900 PLN Net price: 3,790 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange fluctuations)

Condition: excellent (used), CATALOG NUMBER 7479 Technical data: - shaft width: 410 mm - 4-knife shaft (TERSA) - noise reduction comb - shaft guard - table length: 2610 mm - longer infeed table: 1435 mm - cast iron tables - both tables adjustable - original cast iron tiltable fence - brake Ppsdex Tgwcjpfx Afhol - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg ADVANTAGES – Made in Italy – 4-knife shaft – brake – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations)

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Condition: as new Features and technical specifications: - Total table length: 2720 mm - Infeed table length: 1498 mm - Maximum planing depth (joiner): 8 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence swivel range: 90 – 45° - Extraction port diameter: 120 mm - Drive motor power: 7 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Ppsdpfx Afjwka Txshel - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 pcs - Cutterhead speed: 5000 rpm - Maximum planing width: 520 mm Dimensions: 2,750 x 1,500 mm Weight approx. 720 kg Availability: short-term Location: 63934 Röllbach

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm - Motor power: 3 kW - Extractor connection Ø 120 mm - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Ppedsx U U Ekopfx Afhsl Reference: R-A0117