Used Max Simmel for sale (24,604)

Condition: good (used), Planer moulder 230/120 mm, profiling capable, year 2006 Nedpfx Aoxn Uptjh Rowd

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Loading Platform: - Lowbed with external beams in extendable SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking mechanism - Supply lines protected inside the extendable side rails, automatically adjusting to the current bed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for attaching RUD screw-on rings Gooseneck: - Gooseneck in SNT design for optimized platform length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth wheel load: 23,000 kg Njdpfjxarl Njx Ah Rewd - For tractors: 4x2, 6x2 Rear Chassis: - Rear chassis in short version with closed external frame and checker plate cover - Running gear with excavator recess, closed in the rear half to accommodate the air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings horizontal, front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Technical axle load per axle: 12,000 kg - Air suspension with lift and lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF - Manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transmission to the truck via the standardized EBS interface in accordance with ISO 11992 - The truck must be capable of processing and displaying this data for correct operation Braking System: - Braking system according to EU regulations with EBS-E (2S2M) Electrical System: - Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with indicators - ASPÖCK-UNIBOX at the front connection point with 24N, 24S, and 15-pin sockets as per standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Steel Construction: - Steel construction from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure is automatically shot-blasted after welding using a blasting turbine system - Second blasting process with corundum for optimal adhesion of coating system - HRM metallization of complete chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure maximum corrosion protection - Final paint finish with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, as per RAL system 841GL - Rims in silver - Rear section metallized and painted RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test as per ISO 9227-NSS - Cavities sealed with special wax Including the following additional equipment: - 2" King pin - One galvanized steel front wall, approx. 400 mm high - Remote steering of front and rear axles by cable remote control with pushbuttons, including single track axle monitoring (without installation in the tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupling instead of screw couplings - Electro-hydraulic power pack - Preparation for mounting container locks for 1x 20' or 1x 40' container on the external beams - Without container locks

Condition: new, maximum load weight: 45,820 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate or short-term delivery, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flush-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over the axles with checker plate Axles: * BPW axles and suspension * 1st axle rigid, all other axles hydromechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5 3PMSF tyres, load index (146/146 F) * Brand of our choice * TPMS tyre pressure monitoring system in accordance with ECE R 141 * Data transmission to the tractor unit via standardized EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting load (approx. 50 t test load) Brake system: * Wabco brake system in accordance with EU regulations with EBS-E (4S3M), without connection lines to the tractor unit Paintwork: * Entire steel construction automatically blast cleaned after welding with shot blasting system * Second abrasive blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint system tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Steel construction: * Steel construction made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations * 24 volt lighting ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets in accordance with ISO * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Nodpjxbmpfofx Ah Rswd Including the following additional equipment: * 2 inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanized connection panel at the front * Electro-hydraulic unit * Rear axle steering from both front and rear, operated via cable remote control with pushbuttons, including single-track control of the axles (without installation in the tractor) * Galvanized folding supports under the rear platform bevel * 1 pair of recessed lashing rings along the rear central beam in the bevel (LC 10,000 daN) * On the gooseneck, plug-in aluminum side walls and rear wall, approx. 2,440 x 400 mm (L x H) * The rear galvanized plug-in stanchions are removable. (Body length approx. 2,560 mm) * One galvanized toolbox integrated in the chamfered gooseneck * 3 pairs of WADER container locks in t

Condition: new, maximum load weight: 39,670 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with hardwood flooring approx. 30 mm thick * Rear of gooseneck in straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading Area: * Extendable loading area * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two rigid axles, two self-steering axles * Air suspension with lift/lower function * Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Drum brakes * Axle tool kit Tyres: * 205/65 R 17.5 * Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transfer to the tractor unit via the standardised EBS interface as per ISO 11992 * For correct display, the tractor unit must be able to transmit and display these data Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically blasted after welding using a shot blast system * Second blasting with corundum for optimal coating adhesion Nedpfx Ajxarlveh Rewd * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Final coating with 2 x 2K topcoat, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL * Wheels in silver * Rear section metallised and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested with salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Electrical System: * Electrical system in compliance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights blink together with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings at the galvanised connection strip up front * Galvanised folding supports beneath the loading area bevel * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * On the gooseneck, plug-in aluminium side and rear boards, approx. 2,440 x 400 mm (L x H) * The rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * Support bracket with 1 pair of WADER container locks. Fifth-wheel load approx. 20,000 kg * 7 pairs of WADER container locks for 1x 20' container in the loading area * 1x 40' container in the loading area, 1x 40' container on the gooseneck, 2x 20' container * 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area * One galvanised bracket running across under...

Condition: new, maximum load weight: 48,010 kg, overall weight: 66,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpts from the equipment list are detailed below. Full equipment details on request. Gooseneck: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6x4 or 8x4 Low-bed: * Low-bed with external beams, extendable design, SUPER LOW design, approx. 7,550 mm long * Low-bed with fixed hardwood floor, approx. 40 mm thick, and mechanical lock * Supply lines run protected in the extendable beams and automatically adjust to the respective low-bed length * 7 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings Nsdpfjxbmprsx Ah Rewd Rear undercarriage: * Rear axle assembly with closed outer frame, checker plate surface and continuous prism excavator recess, approx. 1,450/900 x 505 mm, open at the rear * 2 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN) * 1 pair of lashing rings, horizontal in the recess (approx. LC 10,000 daN) * 2 pairs of lashing rings, horizontal in the recess (approx. LC 16,000 daN) * 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE AXLE: * PENDLE AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on the axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Axle tools Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer of our choice * Load index (146/146F) Braking system: Wabco brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Painting: * Complete steel structure automatically shot blasted with throw wheel system after welding * Second blasting using corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure the best corrosion protection * Final painting: 2 layers of 2K topcoat, single-color RAL 3002 Carmine Red per RAL system 841GL Including the following accessories: * Preparation for the mounting of bolted container positions for 1x 20' or 1x 40' container on the external beams * Without container locks * 3.5 inch king pin * One galvanized steel front wall, approx. 400 mm high * Remote steering operation by cable at front and rear with push-button control, including single-track control of axles (installation in the tractor unit not included) * Electro-hydraulic unit * On the gooseneck: plug-in aluminium side walls and tailgate, approx. 2,000 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable (body length approx. 2,120 mm) * Hydraulic connections from gooseneck to low-bed with multi-coupling instead of threaded couplings. No guarantee for seals * On the gooseneck, a separate air connection with air gun * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * One INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck * 2 pairs of screwable lashing rings M20 (LC 5,000 daN) * 2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) * Folding extensions, approx. 230 mm wide per side, extension planks made of hardwood. The maximum load is on an area of approx. 200x2

Condition: as good as new (ex-display), Year of construction: 2023, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions Nwjdpfsxabntox Ah Rjd technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: new, maximum load weight: 36,360 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Telescopic loading platform with rear slope approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing laths approx. 15 x 15 mm, including extensions at the bottom * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each * Recess in the slope and extending into the platform for accommodating an excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) Nedpfx Ahjyhkq Ue Rswd * Cut-outs in the platform's outer frame for attaching tie-down straps (LC 2,000 daN) Two-Piece Steel Ramps: * One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulically folding ramp sections and hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg Landing Gear: JOST landing gear (mechanical) with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated automatically by reverse gear and manually * Air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141 Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection * Final paintwork with two coats of 2K topcoat, solid RAL 3002 Carmine Red, in accordance with RAL System 841GL * Wheel rims in silver grey Incl. the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Electro-hydraulic power unit at the rear, under the loading platform * On the gooseneck: plug-in aluminum drop sides and tail board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable (body length approx. 2,560 mm). * One galvanized toolbox integrated in the gooseneck chamfer * 2 pairs of WADER container pockets on the loading platform for a 20' or 30' container * 3 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform * 3 additional pairs of removable galvanized covers over the wheel recess – max. point load 3.5 t each * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hook-on intermediate table, approx. 300 mm wide * Intermediate table with offset load ar

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Nodpfx Aheyhkrrs Rowd Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley Njdsyhkqzspfx Ah Rjwd * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 7 pairs comple...

Condition: used, mileage: 1,09,050 km, power: 125 kW (169.95 HP), first registration: 01/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,046 mm, total width: 2,035 mm, total height: 2,293 mm, loading space length: 3,400 mm, loading space width: 1,850 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 4697 ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide. Always over 400 vehicles immediately available at the best prices under . Largest selection – lowest prices. More than 1,000 satisfied customers per year – top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Top Condition! First owner, German vehicle, non-smoker vehicle Full service history exclusively with Mercedes Benz Next service due in 644 days Brake pads in new condition, front and rear Automatic transmission Body: Deep-freeze box Thermo King V500 MAX Refrigerant R-404A Standby cooling + engine-powered cooling According to the manufacturer (Thermo King), the refrigeration unit can ideally reach temperatures down to max. -20°C. Whether this is achieved depends heavily on usage and circumstances and is not guaranteed (loading area size, insulation, frequency of door openings, ambient temperature, etc.). MBUX multimedia system (7" touchscreen) Navigation system for MBUX multimedia system Cruise control Active lane keeping assist Traffic sign recognition Attention Assist (fatigue detection sensor) Inductive smartphone charging tray (wireless charging) Automatic climate control (Tempmatik) Instrument cluster with color display Comfort driver's seat Rear portal doors ---- Special equipment: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * 1 DIN slot front under roof lining * 2nd battery (auxiliary battery) in cab * 3-button remote for central locking * Acoustic package * 13-pin trailer socket * Armrest, driver and passenger door * 1-pole battery isolator switch * DAB tuner (digital radio reception) * Driving assistance system: active lane keeping assist * Driving assistance system: Attention Assist (fatigue detection sensor) * Driving assistance system: traffic sign recognition * Chassis: stabilization level II * Electric parking brake * All-weather floor mats * 250 A alternator * Cruise control * Front cup holders * Grab handle, co-driver double seat (inside seat) * Grab handles, A-pillars * Additional main key * Inductive smartphone charging tray (wireless charging) * Flip-up lid for storage compartment * Flip-up lids for left/right storage compartments * Terminal strip for electrical connections (driver's seat base) * Automatic climate control (Tempmatik) * Instrument cluster with color display * Fuel tank: main tank 93 liters * Loading package, dashboard (additional USB ports and 12V socket) * Front engine PTO with bracket for additional coolant compressor * Navigation system for MBUX multimedia system * Fog lights with cornering function * Full wheel covers * Smoker's package Njdpfx Asyg T Rheh Rewd * Spare wheel in running gear * Spare wheel holder under rear frame incl. jack * Windscreen wipers with rain sensor * Front mud flaps * Seat belt warning system (co-driver side) * Seat equipment: comfort headrest, driver's seat * Cab seats: co-driver double seat * Cab seats: comfort driver's seat * Cab seats: driver's seat with lumbar support * Lockable storage compartment above windscreen * Socket (12V) in the cab * Red fuel cap * Cut-off relay with battery

Year of construction: 2024, condition: used, For inquiries about the crawler, Mr. Herden will be happy to assist you by phone. Seppi M. MAX 75 HP / 75 PS / Radio-Controlled Crawler Vehicle / Recovery Winch / Seppi M. MICROFORST rc 155 Forestry Mulcher / Seppi M. H 5 rc 175 Mulcher / In stock & immediately available Price for crawler without attachments: €126,190.00 net / €150,166.10 gross Standard configuration and features: Dimensions*: - Total width with tracks retracted: 1,650 mm - Total width with tracks extended: 2,450 mm - Depth: 2,600 mm - Height: 1,250 mm - Track length: 1,570 mm - Track width: 230 mm - Lateral/longitudinal incline: 55° - Weight (without equipment): 2,200 kg Engine: - Perkins 4-cylinder diesel engine - Power: 55 kW / 75 HP - Torque: 270 Nm at 1,800 rpm - Displacement: 2,200 cc - Cooling with automatic reversible fan (automatic fan cleaning) Drive: Nodjyfrpgopfx Ah Rowd Hydraulic system for attachments: - High-flow hydraulic circuit (closed loop) for attachments (double-acting): - Capacity: max. 93 l/min at 2,750 rpm - Pressure: 380 bar Service hydraulic system: - Low-flow hydraulic circuit for attachments (double-acting): - Capacity: max. 15 l/min at 2,750 rpm - Pressure: 200 bar Vehicle hydraulic system: - Capacity: max. 154 l/min at 2,750 rpm - Max. pressure: 400 bar Undercarriage: - HIGH GRIP: Stability and traction on inclines up to 55° under optimal conditions - Hydraulically adjustable vehicle width 800 mm (2x400 mm) - AUTO TRACK TENSION: Active automatic track tensioning - Patented track derailing protection - Stability and traction due to robust tread and large contact area of the tracks Control: - Radio remote control with graphic display (vital machine parameters and tilt indicator) - Range: 150 m - Potentiometer for speed control with variable travel speed from 0 to 100% Lifting system: - FLOAT: Lifting mechanism with assisted float position (contact pressure regulation) Standard equipment: - Vehicle with rollover protection bar - LED headlights - Internal components protected by highly robust steel covers - Underguard to protect engine and hydraulics - Colour: anthracite RAL7021 | red RAL3020 OPT 573 Bio hydraulic oil OPT 221 Rear forestry protection with recovery winch. Optional: SEPPI M. MICROFORST rc 155 – Hydraulic forestry mulcher Price: €23,130.00 net / €27,524.70 gross Optional: SEPPI M. H5 rc 175 – Hydraulic mulcher Price: €13,770.00 net / €16,386.30 gross We have a large selection of various Seppi M. products in stock and immediately available! Mr. Herden (Tel.) will be happy to assist you. Upon request, we can also provide financing offers. We are an official Seppi M. distributor and service partner. We supply the complete Seppi M. product range! Errors and prior sale excepted! Rental available = More information = New: Yes Contact Marius Herden for further information.

Condition: good (used), functionality: fully functional, machine/vehicle number: NM0KCXTP6KPL91607, mileage: 75,063 km, power: 368 kW (500.34 HP), first registration: 03/2024, fuel type: diesel, empty load weight: 8,581 kg, maximum load weight: 9,419 kg, overall weight: 18,000 kg, tire size: 315/70 R 22.5, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 06/2026, fuel: diesel, fuel tank capacity: 1,050 l, brakes: intarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power mirror, seat heater, second fuel tank, soot filter, traction control, Our vehicle number #30587 Nsdox H Svkspfx Ah Rswd - Sleeper cab, long version - Euro VI emission standard - 500 HP - 4x2 drive - Wheelbase: 3,600 mm - Intarder - BL suspension - Tire size: 315/70 R 22.5 - Fuel tank capacity: 600 liters - Additional tank: 450 liters - Color: frost white - Fifth wheel height: 1,130 mm - Permissible gross weight: 18,000 kg - Payload: 9,419 kg - Unladen weight: 8,581 kg - Differential lock - Automatic transmission - Air conditioning - Disc brakes - Auxiliary heater - Cruise control - Traction control - Aerodynamics package - 2 bunks - Driver’s air-suspension seat, heated - Electric stationary air conditioning - Ford multimedia audio system - Navigation system - Refrigerator - Adaptive cruise control (ACC) - Emergency brake assist (AEBS) - Forward collision warning system (FCW) - Lane departure warning system (LDWS) - Hill start assist - Electronic Stability Program (ESP) - Eco-roll function - Air-sprung front axle - Diesel particulate filter (DPF) - Side underrun protection (SB) - Central locking with remote control - Rain sensor - Electric windows (double) - Electrically adjustable & heated exterior mirrors - Cornering lights - Front fog lights (NSW) - Lane assist (ASW) - LED daytime running lights - Electric sun blind - Roller blinds, left & right - Communication preparation (NA pre-installation) - Rear axle load indicator - On-board computer - Leather multifunction steering wheel - Max Cruise Level - Air gun Financing available on request!

Condition: new, Year of construction: 2024, Effective delivery rate approx. 1050 l/min Maximum pressure 10 bar tank capacity 270 l Air outlet ½ " UNIT 1 Dimensions and weights Nwsdpfx Aefh Hahsh Rod Length approx. 1200 mm width/depth approx. 650 mm Height approx. 1540 mm Weight approx. 295 kg Electrical data Input power electric motor 7,5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Noise emission Sound pressure level Lp 62 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Engine(s) Motor type Electric Location: From warehouse 54634 Bitburg - immediately available-

Condition: good (used), Year of construction: 2000, Hettich Blue Max 8 hardware drilling machine Make Hettich Nwedpfx Ahor Igt Ds Rjd Type Blue Max 8 FS Number of spindles in row 5 pieces Press-in die Workpiece clamping cylinder 2 x pneumatic Pneumatic drilling feed Stop rulers Pendulum stops Foot control Space requirement approx. 1200 mm x 700 mm x 1500 mm Weight approx. 150 kg Some drill bits included The stops cannot be seen in the photos, but are included Location: ex stock 54634 Bitburg - immediately available -

Condition: used, used, great condition, little usedMake HettichType Blue Max mini PMPneumatic drill feedStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Nodpfx Aovwf Dqeh Rowd

Condition: new, The APHS MAX is a custom-engineered, heavy-duty press brake developed for large-scale and special bending applications. It is designed to meet the demands of industries requiring extra-long, high-tonnage, or custom-configured press brakes. This model combines power, precision, and adaptability, making it ideal for processing oversized workpieces and fulfilling unique production requirements. Nwsdpownagtofx Ah Rod

Condition: used, Year of construction: 1991, weight of the machine ca. 1,5 t Nwodpfx Ahjx Ni E Io Red ja

Condition: good (used), Pipe grab, round grab -self-locking -Replacement arms -up to approx. max.: Ø 150 cm Nsdpob A I Sbjfx Ah Rowd -Clamping claws -Total weight: 350 kg

Condition: good (used), Cardan shaft, drive shaft -Flange: Ø 120 mm -Toothed shaft: Ø 50 mm -min. length: 665 mm -Max. length: 780 mm Nedob A Nfrspfx Ah Rowd -Weight: 14 kg

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Cup hinge drilling head: yes Drill pitch: 32 mm Hold-down device: yes / pneumatic Power consumption: 2.2 kW Nsdpfswv Nb Njx Ah Rowd Drilling unit: swivelling

Condition: new, Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm Introductory special price Includes: - Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm SAFE - SOLID - FAST The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2-hand control - Protective shield, rigid - incl. HM saw blade 500 mm Z = 108 Technical data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Njdpfjvtrkisx Ah Rowd Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm. Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction nozzle: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between 2 stops (optional): 60 mm Note: Basic price without roller conveyors. When setting up the saw, a support table or roller conveyor must be installed at least 1 m to the left and 1 m to the right of the saw. Included: - Roller conveyor without scale on the right, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Include: - Roller conveyor with stop ruler and scale on the left, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Include: - Pneumatically pivoting stop with 200 mm length - new exhibition machine -

Condition: good (used), Container rotating device, welding rotating device, welding rotating device, welding device, welding turntable Nwodpfx Aob A Npteh Rjd -Max. diameter: 430 mm -Drive: 0.18 kW -Speed: min. 0 mm/min -Speed: max. 1190 mm/min -Adjustable: electronic -Foot switch -Dimensions: 1100/600/H1600 mm -Weight: 166 kg

Condition: good (used), Pressure testing device, measuring device Nwsdpfx Aob A Rlyeh Rjd -with trailing-pointer -Max. pressure: 20 bar -High-pressure hose -Dimensions: 400/160/H200 mm -Weight: 4 kg

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches Nwedsb A Iwcepfx Ah Rjd -Cutting jaws: 2" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: good (used), Thread cutting machine, pipe thread cutter Nodpfx Aeb A Rzweh Rewd -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 60 kg