Used Metal Working Machine for sale (75,215)

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system type L90 automatic hot water parts washer with automatic basket drive by means of gear motor, stainless steel washing pump (Lowara), rotating 3-sided spraying system (from below, from the side and from above) with stainless steel nozzles. - basket diameter: 790 mm - useful height: 500 mm - max. loading weight: 150 kg - spraying pressure: 3 bar - tank volume: 105 litres - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.150 x 1.250 x 1.900h mm Empty weight: approx. 220 kg Washing time clock freely adjustable via Omron timer (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) Suction filter as pump protection Operating hours counter Steam vapour extraction incl. condensate recirculation Preparation for later installation of an oil separator Giodpfohgh I Ssx Af Aet Parts washer is as good as new, never used. OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!!

Condition: as good as new (ex-display), Year of construction: 2025, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Gisdeuxuv Aspfx Af Ajt

Year of construction: 2026, condition: new, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Giedpfx Afjfl Ufzo Aet

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Gsdpfohl H Ubjx Af Aeit

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 1,500 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,830 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,700 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, table length: 2,000 mm, table width: 1,500 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,500 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,500 mm, height adjustment type: mechanical, input current: 61 A, pass-through width: 1,500 mm, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are proud to present our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable and experienced company specializing in metal and woodworking machinery. With decades of expertise and a proven track record of innovation, Madora is recognized for delivering durable, efficient, and user-oriented solutions, specifically tailored to the requirements of industrial clients throughout Europe. Giedpfx Aowzvkhjf Ast Our machines are engineered for precision, performance, and long-term reliability—all offered at competitive market prices. The GP 1500 3Z is an outstanding, multi-purpose deburring machine designed for cleaning sheet metal after a variety of cutting processes. With three independent "Z"-type processing units, this machine stands out for its exceptional versatility and high processing capacity. What does this mean in practice? It allows up to three operations in a single cycle: not only does it efficiently remove scale and slag after plasma cutting, but it also enables simultaneous deburring and edge rounding of workpieces following laser cutting—all in one pass. Its wide machining range, with material thicknesses and working widths up to 1,500 mm, makes it suitable for both small and large workpieces. With the appropriate tooling, the machine is also capable of heavy-duty edge rounding and oxide layer removal. The GP 1500 3Z deburring machine features a TFT touch-screen control panel, enabling the operator to fully and continuously monitor and adjust machining parameters such as workpiece height, feed rate, and tool rotational speed. Each processing unit can be operated independently, giving the user complete flexibility in selecting which operations to perform during a single pass.

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3585, Offer 25255 Giodpfx Afoy R Able Ast Technical data: - Saw blade diameter up to 300 mm - Saw blade feed via hand lever - Maximum vise opening width: 145 mm - Cutting capacity with saw blade diameter 300 mm: - At 90°: round 95 mm flat 125 x 90 mm - At 45°: round 95 mm flat 95 x 85 mm - Mitre adjustment: left up to 30° / right up to 45° - Saw blade speeds: 20 and 40 rpm - Drive: 400 V / 1.6 / 2.1 kW - Coolant system - Discharge roller table: 1500 mm - Required space approx. W 600 x H 2000 x D 800 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 2012, machine/vehicle number: 10004373, Offer 26126 Technical specifications: - Manual saw blade feed - Workpiece clamping via machine vice - Saw blade diameter up to 315 mm - 2 cutting speeds: 40 – 80 m/min - Cutting range at 90°: round 110 mm; rectangular 82 x 160 mm; square 82 x 82 mm Gijdey Rz S Nspfx Af Aet - Miter cut at 45°: round 110 mm; rectangular 80 x 120 mm; square 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Space requirements approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg - Measuring stop: 3000 mm

Condition: new, Year of construction: 2025, machine/vehicle number: ZCV50, ZCV 50 CIRCULAR TYPE VIBRATORY MACHINE * Net volume of 50 liters (Capacity from 20 L to 1250 L is available upon request) * Highly wear-resistant polyurethane (PU) lining (90 Shore) MOTOR: * High-performance three-phase drive motor * 0.34 kW, 1500 rpm * The motor is maintenance-free – no motor lubrication is required. CONTROL PANEL: * Main switch and emergency stop switch * Timer and working hours counter * Control box with switch for motor right/left rotation * CE safety standard PAINTING: * Colour in RAL 5011 & RAL 7036 Gjdpfx Asw Dp Ekjf Aoit * Epoxy paint is used to ensure long-lasting coating durability.

Condition: new, Year of construction: 2025, functionality: fully functional, sheet thickness (max.): 5 mm, total length: 950 mm, total width: 850 mm, total height: 1,175 mm, overall weight: 80 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.1 kW (1.50 HP), power: 1.1 kW (1.50 HP), Equipment: documentation/manual, CENTRIFUGAL DRYER MACHINE METAL CENTRIFUGAL DRYER Technical Specifications: Dryer Body Material: 5 mm iron thickness, painted with acid-resistant paint. Diameter: 58 cm Height: 80 cm Drying Basket Material: 1.5 mm stainless steel thickness, electropolished. Diameter: 44 cm Height: 32 cm Basket Volume: 50 liters Speed: 3000 rpm Centrifugal Motor: Power: 1.1 kW 3000 rpm Drying Fan Material: Aluminum Cast Gjdporkl Unsfx Af Ajit Motor Power: 0.25 kW Speed: 3000 rpm Heater Power: 2 kW heating tube External Dimensions: L: 850 mm W: 850 mm H: 1175 mm

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 950 mm, sheet thickness (max.): 120 mm, working height: 120 mm, control type: CNC control, Equipment: CE marking, TECHNICAL DETAILS Station 1: Sanding belt Station 2: Rotary brush Station 3: Rotary brush Min. sheet thickness: 0.5 mm Max. sheet thickness: 120 mm Working width: 950 mm Working height: 0.5-120 mm MACHINE DETAILS Power: 39 kW Control: CNC Number of stations: 3 Dimensions & Weight Dimensions (L x W x H): 3,940 x 1,980 x 2,010 mm Net weight: 7,000 kg Godpfx Afoy Hhp Tj Asit Transport packages: 4 EQUIPMENT CE marking

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Giodpfxouxuwaj Af Ast

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Gisdpfendcbysx Af Ajt

Condition: excellent (used), Year of construction: 2026, Timesavers Series 10 Manuel Ginder The machine is a demonstration machine which was used occasionally for demonstrations. Gjdpjfhb N Sjfx Af Ajit Easy to operate and pleasant to ride. Rubber carpet with good grip and additional vacuum field for small parts. Speed infinitely variable. The machine is in our warehouse and can be viewed at any time under power, tested and accepted.

Condition: excellent (used), Series 12-225-WRD 1st station sanding belt for removing burrs and laser spatter Gsdpjymlfdsfx Af Aoit 2nd station disc for light edge rounding Pass-through width 225 mm incl. TEKA extraction system

Condition: excellent (used), functionality: fully functional, Timesavers 22 Series 1100-WBB 1st Station: Abrasive belt for pre-grinding, ideal for removing burrs, laser scale, etc. Optionally, the abrasive belt can be switched to a Scotch-Brite/non-woven belt to achieve a surface finish on the parts. Easy belt change in under a minute thanks to quick-change system. The belt speed is continuously adjustable. 2nd & 3rd Station: Disc brushes for edge rounding, two stations in sequence with both left and right rotation for optimal results. Eccentric mechanism enables lateral oscillation of the disc brush stations (can be switched on or off). Easy brush change using the quick-change system. Disc brush speed is continuously adjustable. Conveyor belt speed is steplessly adjustable. Working width: 1100 mm Maximum part thickness: 100 mm The machine is fully operational and can be inspected and tested under power on site. Gisdpfxsx Uwlaj Af Ast

Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Gisdpfxeudb R Ie Af Aot Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. incl. ceramic brush set R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Weight: 6200 kg

Condition: excellent (used), functionality: fully functional, Industrial High-Performance Sheet Pan Cleaning Machine TOP Jeros Model: 9029TS with 9020 Capacity: 800–1000 trays/hour With oiling system/for external oil tank Touchscreen control for automatic sheet pan cleaning Gedpfxoxwtnyj Af Ajit Premium stainless steel construction Connection: 400V, 16A-CEE plug Used machine, cleaned Options: Maintenance contract Service package Delivery service Commissioning / Training Visit our large machinery warehouse!

Condition: good (used), In good technical condition and fully functional. Godpfxsy Hr R Io Af Asit Year of manufacture: 1981 Max. working length: 3000 mm Max. sheet thickness: 25 mm

Year of construction: 2022, operating hours: 50 h, condition: excellent (used), functionality: fully functional, Assonic Ultrasonic Compact Sieving Machine CSM-500 SPC – Inertizable - Ultrasonic sieving combined with low-frequency excitation - Control panel for manual operation or integration into process workflows - Inlets and outlets: ISO-KF40 - Prepared for inertization (sieving with < 2% residual oxygen possible) - Incl. dosing unit and bottle holder - Gas connection with quick connector Specifications (excerpt from Assonic website) - Approx. 400 kg/h 316L at 63 μm - Approx. 100 kg/h AlSi10Mg at 63 μm - ATEX certification possible - Small footprint - Standalone machine - Low CO² footprint Accessories: - Laminate sieve 43 µm (new) - Laminate sieve 20 µm (new) - Laminate sieve 63 µm (used, for aluminum materials) Condition: - Very good condition, normal signs of use - Ready for operation - Scope of delivery: as described Gedeywhvnopfx Af Aoit - Price: plus shipping costs - Sale exclusively to businesses - Sale without any warranty - No guarantee, no returns - Sold as inspected or as described - Liability for consequential damages excluded - Errors and prior sale reserved - All information subject to change

Condition: used, Year of construction: 2008, working width: 800 mm, Grinding machines TimeSavers are designed for surface processing of parts up to 800 mm wide. Product fixation - vacuum. The machine is equipped with 2 stations: abrasive belt / brush. The equipment is suitable for grinding, edge rounding, oxidation and slag removal, final grinding. Technical specification: Model: Timesavers 41 series 900 WRD Year: 2008 Max. part width: 900 mm Max. part height: 80 mm Min. part height: 15 mm Speed: 1 - 10 m / min (adjustable) CNC controller: adjustable speed, part dimensions, grinding pressure and more. Other: heater, can work in cold conditions Gijdpfx Afjvyhtto Ast If you have more questions, we will be happy to answer.

Condition: new, Year of construction: 2026, Machine for machining various internal and external surfaces, mainly keyways. Widely used in repair shops and tool shops, in single and small batch production. Machine for machining various internal and external surfaces, designed for precise work, especially grooves. It is widely used in overhaul shops and tool shops, both in unit and small batch production, making it a versatile tool for various industries. Main features of the machine: Gisdpfjuyhxmex Af Aot Hardened and ground guides: ensure maximum durability and precision, guaranteeing longevity and high quality machining. Tilting chisel head of +/- 30°: Allows flexibility in machining surfaces at different angles, increasing the versatility of the machine. Built-in lubrication system: Automatic lubrication of the workpieces, which reduces friction, increases machine life and minimises the need for manual maintenance. Adjustable stroke speed per minute - 6 settings: Allows the speed to be adjusted to suit the specific material and type of machining being carried out, improving accuracy and efficiency. This machine is ideal for both small batch production shops and those that need high precision when overhauling or reconditioning tools. Thanks to modern features such as the ability to adjust the speed, users can easily adapt the operation of the machine to their individual needs, increasing efficiency and saving time. Technical specifications Maximum stroke 125 mm Minimum number of strokes 60 / min. Maximum number of strokes 350 / min. Number of speed steps 6 Head rotation 90º Table dimension 500x200 mm Table travel X/Y 220 mm Z axis travel 200 mm Motor power 0.37 kW Overall dimensions 800 x 750 x 1550 mm Weight 290 kg Knife shank dimensions Ø 10 / Ø 16 mm or 16 mm square shank

Condition: excellent (used), functionality: fully functional, Details - Promecam RG103 Specifications Press force: 100 t Bending length: 3000 mm Distance between uprights: 2600 mm Gedpfjy Hf Utox Af Ajit Throat depth: 400 mm Vertical stroke: 100 mm Working speed: 9 mm/s Number of axes on the backgauge: Motor power: 8.8 kW ----- Dimensions (L x W x H): 3050.0 × 1650.0 × 2100.0 mm Weight: 5500 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, Semi-automatic can seamer for round cans. Stainless steel version. Can diameter: 42–163 mm, height: 26–300 mm, material thickness: 0.35 mm. Currently equipped for 99 mm. Giodoxn Nqlspfx Af Ast

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 84659300, Machine consists of 3 working units: 1st. XSV Brushes (12 rotating and oscillating brushes) 2nd XSV Brushes (12 rotating and oscillating brushes) 3rd Roller brush Gjdpsxn Ifuefx Af Asit Feeding belt 1350 mm.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 290 kg, input voltage: 400 V, total length: 800 mm, total width: 750 mm, total height: 1,550 mm, We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia – used by hundreds of companies across Europe. Gjdpfxsyux E He Af Aeit For 15 years we have focused on quality, precision, and reliability. Technical data: Maximum stroke: 125 mm Minimum stroke rate: 60 strokes/min Maximum stroke rate: 350 strokes/min Number of speed steps: 6 Head rotation angle: 90° Table size: 500 × 200 mm Table travel X/Y: 220 mm Z-axis travel: 200 mm Motor power: 0.37 kW Overall dimensions: 800 × 750 × 1550 mm Weight: 290 kg Tool shank diameter: Ø10 / Ø16 mm Delivery conditions: Machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Operating manual (DTR) in English Delivery to the customer is possible. The delivery price is determined individually according to the carrier’s quotation. If you are interested in other machines, we encourage you to visit our website.