Used Mikron Ume 560 for sale (191)

Condition: used, Year of construction: 1982, x-travel 400 mm Bedpeu U Sabjfx Abcswh y-travel 400 mm z-travel 380 mm total power requirement 2,6 kW weight of the machine ca. 1,5t t

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t Bodpfxet Hwxbo Abcswh dimensions of the machine ca. m

Condition: used, Year of construction: 1997, Technical details: x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm turning speed range - spindle: 5 - 5000 1/min power - main spindle: 11 kW tool taper: SK 40 tool changer: 44 Werkzeuge feed: 10 m/min surface area: 1200 x 600 mm table load: 0,5 t total power requirement: 15 kVA weight of the machine ca.: 4,24 t Bodpjvb Hzrefx Abcowh Toolchanger with 44 tools, pendant handwheel for easy setup. *

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 5.47.07.02, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, rotational speed (max.): 6,300 rpm, number of slots in tool magazine: 44, TECHNICAL DETAILS Drive power at 44% duty cycle: 9 kW Drive power at 100% duty cycle: 6 kW Max. torque: 52 Nm Machining spindles (vertical and horizontal) Max. torque at the spindle at 44% duty cycle: 800 Nm Number of gear stages: 4 Speed range adjustable (vertical and horizontal): 10 – 6,300 rpm Tool holder / Pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Pull force: 10,000 N Ejector force: 3,500 N Travel paths in automatic mode Longitudinal movement, spindle feed (X-axis): 600 mm Cross movement, spindle slide (Y-axis): 500 mm Vertical movement, spindle slide (Z-axis): 450 mm Feed drive (AC) Feed rate programmable X / Y axis: 0 – 15,000 mm/min Feed rate programmable Z axis: 0 – 12,000 mm/min Rapid traverse speed X-/Y-axis: 15,000 mm/min Rapid traverse speed Z-axis: 12,000 mm/min Coolant Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Noise emission Sound power: 75 dB(A) Clamping table Table size: 530 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 2 × 22 Tool diameter: 80 / 130 mm Tool length (max.): 350 mm Tool weight (max.): 6 kg Workpiece weight max. in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s MACHINE DETAILS Total weight with protective enclosure: 3,000 kg Total weight with cabin roof: 3,100 kg Bwedpswm I N Hsfx Abceh Ambient conditions Max. permissible ambient temperature: 35 °C Max. permissible relative humidity: 75 % Electrical connection data Total installed nominal power: 15.8 kW Utilized and connection power: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: excellent (used), Year of construction: 1996, NEW ARRIVAL +++++ 1 used, very well-maintained MIKRON MULTISTAR CX 24 transfer machine / rotary transfer machine Machine can be inspected under power. Part setup is no problem. With MITSUBISHI AACPU-S1 control system - Machine Year of manufacture 1996 - Detailed technical data as per appendix - Machine can be inspected under power. Conversion - INSTALLATION - Setup - Application can be offered. Pricing: ex-site, unpacked, uninsured. Delivery time: immediately - subject to prior sale. Technical data is non-binding - errors excepted. Bsdpfx Abst I T N Ejcswh Payment: As is customary for used machines, net before removal.

Condition: good (used), Condition: Used Stock number: 968859 State: Good Maximum diameter: 100 mm (4") Maximum length: 100 mm (4") Number of teeth: 6-400 Maximum pitch in steel: 15 D.P. 12 indexing tables Geometrically calibrated between 200 and 2,400 rpm Feed: Horizontal cut or plunge cut Main motor: 1.5 HP Coolant pump motor: 0.1 HP Hydraulic system motor: 0.1 HP Bwedpfx Abjxlabiecoh Dimensions: 1120x1120x1680 mm Machine weight: 500 kg

Condition: good (used), ⚙️ Mikron Gear Hobbing Machine Type 132-02 (M23) – Now available at our facility in Ireland: Mikron Gear Hobbing Machine Type 132-02 (M23) in very good condition. This precision Swiss-made machine is ideal for the production of small gears, toolrooms, and manufacturers seeking reliable, high-precision gear cutting capabilities. Mikron is renowned for its robust construction and long-lasting performance in gear hobbing applications, making it an outstanding solution for hobbing spur gears, helical gears, and splines with consistent accuracy. Condition: Used Stock number: 968859 State: Good Maximum diameter: 100mm (4") Maximum length: 100mm (4") Number of teeth: 6–400 Maximum pitch in steel: 15 D.P. 12 table revolutions Geometrically calibrated between 200 and 2,400 rpm Feed: Horizontal or plunge cutting Bwedpfx Abexlabcecsh Main motor: 1.5 HP Coolant pump motor: 0.1 HP Hydraulic system motor: 0.1 HP Dimensions: 1120 x 1120 x 1680 mm Machine weight: 500 kg

Condition: good (used), Year of construction: 1995, Machine is in good working condition. Control unit TNC 426 Bjdpfxouzimne Abcowh

Condition: repair required (used), Year of construction: 2003, Parts shown by hand not come. Bedpfxjm Dtnro Abcewh Pallete changer EROWA not come.

Condition: good (used), Parts on table not come. Marked with red. Bwedpfx Abewxdyxjceh

Condition: good (used), Year of construction: 2007, Machine is in good condition, Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm Bwedpjwk Nm Isfx Abceh

Condition: good (used), Year of construction: 2015, Machine is in good condition, parts shown by hand not come. X 1025 mm Y 560 mm Bsdpfewx N Nfsx Abcowh Z 600 mm Heidenhain TNC 620, 16.000 rpm HSK 63

Condition: good (used), Year of construction: 1999, Machine is in good condition. X 750 mm Y 400 mm Z 500 mm 10.000 rpm Bwsdpewx Rafsfx Abcjh

Condition: used, Year of construction: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min Bwjdpfetqqplsx Abceh feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: used, Year of construction: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm table surface area 1100 x 585 mm rotary table dia. 500 mm spindle taper SK 40 spindle turning speed range 5 - 6300 U/min spindle power 11 kW no. of tools in magazin 2 x 22 control HEIDENHAIN, TNC 426 total power requirement 20 kW weight of the machine ca. 5,8 t Accessories: various tool holders, probe RENISHAW OMP 60, Bodpfx Abjtz Sqhscjwh coolant

Condition: ready for operation (used), Year of construction: 2006, operating hours: 17,716 h, functionality: fully functional, machine/vehicle number: 0144, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 600 mm Z-axis travel: 675 mm Work spindle speed: 30 - 8,000 rpm Tool holder: ISO B 40 Table size: 1,220 x 620 mm T-slots: 18 T-slots: 5 x 18 mm T-slot spacing: 100 mm Table load capacity: 1,700 kg Control system: Heidenhain iTNC 530 Feed rate X / Y / Z: 3,000 mm/min Rapid traverse X,Y / Z: 24 / 20 m/min MACHINE DETAILS Voltage: 3 x 400 V AC + PE, 50/60 Hz Control voltage: 24 V DC Connected load: 16 kW Weight: 8,000 kg Operating hours Control on: 44,842 h Bwedpoxr Nuxofx Abcsh Machine on: 36,513 h Program run: 15,882 h Drives on: 31,655 h Spindle on: 17,716 h

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530, working area X 600 x Y 450 x Z 450 mm, spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle, machine weight 6,100 kg, power connection 16 kW, main fuse 32 A, operating voltage 400 V, 50/60 Hz Bedpfx Abow Hxzmscjwh

Condition: used, Year of construction: 2007, Vertical CNC machining center MIKRON VCP 800 W Bsdpjw Iqh Hefx Abcjwh With Heidenhain iTNC 530 contour control Year of manufacture: 2002 Travel paths: X 800 Y 650 Z 500 Speed range: 0 - 14,000 rpm

Condition: good (used), Year of construction: 2013, functionality: fully functional, Machine in good condition, hand-shown parts are not included in the set. X 1025 mm Ljbijwx N Nfsa A Hkmsad Y 560 mm Bjdpfxew Dbt To Abcswh Z 600 mm Heidenhain TNC 620, 16,000 rpm, HSK 63

Condition: used, control: Heidenhain TNC 155 Bsdec Tt Hrspfx Abcswh tool taper: SK 40 quill stroke: 110 mm table size: 1000 x 500 mm travel: x-710, y-500, z-460 mm spindle speed: 31,5-3150 rpm accessories: angle table, coolant equipment, div. retainers

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,889 h, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, Machining centre with only 1,889 spindle hours! TECHNICAL DETAILS Travel X-axis travel: 860 mm Y-axis travel: 560 mm Z-axis travel: 600 mm Bjdpfx Ajw Ngmuobcjwh Spindle data Max. spindle speed: 10,000 rpm MACHINE DETAILS Spindle hours: 1,889 h Power-on hours: 42,782 h Number of controlled axes: 3 Control model: HEIDENHAIN iTNC530

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: KU 4165M, travel distance X-axis: 572 mm, travel distance Y-axis: 322 mm, travel distance Z-axis: 265 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 22, The value of the supplied spare parts is approximately €70,000. TECHNICAL DETAILS Loading Modules: 1 module Machining Modules: 3 modules Number of Spindles: 6 Control System System: Bosch Rexroth MTX Part Program Size: Unlimited Remote Diagnosis: Available Programming: ISO code, simulation via EdgeCAM CAM software Workpiece Handling and Loading System Loading System: Parallel to main time, manual, with 3-axis handling or robot Parts Feeding: Paternoster / stack magazine Workpiece Changeover (chip-to-chip time): approx. 6 s Axes Travel X: 572 mm Travel Y1/Y2: 322 mm Travel Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed Force X: 1,100 N Feed Force Y1/Y2: 1,100 N Feed Force Z: 2,500 N Rotational Speed B-Axis: 1,000 rpm Rotational Speed C-Axis: 500 rpm Acceleration B-Axis: 52 rad/s² Acceleration C-Axis: 90 rad/s² Torque B-Axis clamped: 1,000 Nm Torque B-Axis unclamped: 287 Nm Torque C-Axis clamped: 300 Nm Torque C-Axis unclamped: 187 Nm Working Spindle Tool Interface: HSK 40-A External Diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% duty cycle): 85 Nm Power (S6 45% duty cycle): 18 kW Internal coolant supply up to: 120 bar Spindle distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping Force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Bjdjxamh Eepfx Abcjwh Workpiece Clamping Clamping System: EROWA clamping system Activation: pneumatic, 6 bar Tool Changer Tool Discs: externally pre-loadable with position coding, diameter Ø 290 mm Tools (2 discs with 12 positions) per machining module: 22 Tool Disc Weight: 5 kg Max. Tool Weight: 2.5 kg Max. Free Tool Length: 186 mm Max. Tool Diameter: 63 mm Max. Tool Diameter with free adjacent position: 105 mm Shortest chip-to-chip time: ≥ 1 s Max. Total Tool Weight on Disc: 15 kg Positioning time per tool step: 250 ms Tool Holder: HSK 40-A, according to DIN 69893 MACHINE DETAILS Machine dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per machining module: approx. 4.5 t Weight per loading module: approx. 2.5 t

Condition: used, Year of construction: 2008, x-travel 1.850 mm y-travel 1.400 mm z-travel 720/905 mm Control SIEMENS SL 840 D spindle turning speed range 15.000 U/min B - axis -20 / +120 ° Tool bore HSK-A63 0 tool magacine with 45 Plätzen tool length - max. 365 mm workpiece diameter at used places besides 90 mm tool diameter with 2 vacant positions 130 mm NC rotary table 1.600 mm T-slots 12 groove width 18H12 flute distance 100 mm table load capacity 3.000 KG Table speed max. 30 1/min total power requirement 89 kW weight of the machine ca. 26 t dimensions of the machine ca. 7,00 x 6,20 x 4,15 m 5-Axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, Fire extinguishing system, 2x electronic handwheel, Steptec spindle, Spindle oil cooler, coolant through the spindle, Bwjdpfx Asvxwuwjbcsh High pressure pump, Bürener belt filter system, Chip conveyor. Machine can be inspected under power

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Bwjdoxcxz Nspfx Abceh

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Bwsdpfew Sxyxex Abcoh