Used Miller Tp 104 for sale (12)

Condition: good (used), Format: max 720 x 1,040 mm; min 360 x 520 mm Thickness (sealed materials): max 0.5 mm; min 0.06 mm Ledpeqrqwmefx Ai Hjrr Total dimensions (W x H x L): 3,340 x 8,960 x 2,175 mm Weight: 26,920 kg Equipment - Steel plate feeder & delivery - Unimatic C3 remote control - Automatic color adjustment via the control panel - Lateral, linear and diagonal register from computer - Powder applicator Perfecting - 2/2-4/0

Condition: ready for operation (used), Size max 720 x 1040 mm Lodpfx Aisdz Alco Herr min 360 x 520 mm Image area max 710 x 1030 mm Speed max 13.000 c/h Pile height feeder 1400 mm Pile height delivery 1130 mm Equipment • pile feed & delivery • perfecting • Dahlgren dampening • Baldwin refrigerated recirculation • powder spray & Baldwin sheet decurler

Year of construction: 1992, condition: ready for operation (used), Max. paper size: 720x1040mm, min. paper size straight printing: 360x520mm, straight/reverse printing: 440x520mm, paper thickness: 0.06-0.5mm, max. print size straight printing: 710x1030mm, straight/reverse printing: 700x1030mm, max. throughput straight printing/ straight/reverse printing: 7000/ 5000 sheets/h, printing plate size (recommended): 790x1045mm, print start: 48mm, print-free gripper margin: 10.5mm ±1mm. Equipment: Miller TP 104 basic machine with two printing units, perfecting device between the first and second printing unit, numbering tower with control for Zeiser and Leibinger mechanical numbering units (without numbering units), Spiess TP 104/1 sheet feeder, load: 10,000N. Remote adjustment via control console: colour control 1st and 2nd printing unit, fine adjustment of circumferential and lateral register: ±1.5mm, plate cylinder, 2x plate clamping rails at the front - single - only divided at the rear, blanket cylinder washing device - completely defective, cleaning by hand, powder sprayer without additional control, delivery extension additional area after numbering unit by approx. 1.85m, 10x application ink rollers, 8x ink transfer rollers, 1x blanket roller, 1x wash roller, 1x ink lifting roller, complete documentation. Lrjdpfow Azubjx Ai Hsr

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW Ledpezadr Nofx Ai Horr - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: three-phase, total height: 345 mm, total width: 219 mm, total length: 568 mm, input voltage: 400 V, ground cable length: 1,000 mm, overall weight: 23 kg, type of cooling: air, electrical fuse: 16 A, welding power (max.): 12 kVA, open-circuit voltage: 50 V, welding current at 60% duty cycle: 220 A, welding current at 100% duty cycle: 180 A, space requirement height: 500 mm, space requirement width: 400 mm, space requirement length: 700 mm, input current: 16 A, continuous power (apparent): 8 kVA, Manufacturer Miller Model STi 270 Main Category Welding Equipment Ledpey Uxwqjfx Ai Herr Machine Name / Vehicle Type Industrial Welding Machine Condition Used Functionality Fully Functional Inspection Under Power Yes Description Miller STi 270 industrial welding machine for sale. The unit is fully functional and suitable for professional welding applications. Supports both MMA and TIG welding processes. Compact and durable construction designed for workshop and industrial use. Technical Specifications Input Power 400 V, 16 A, 3-phase, 50/60 Hz MMA Adjustment Range 5–270 A, 20–30.8 V TIG Adjustment Range 5–270 A, 10–20.8 V Duty Cycle at 40% 270 A Duty Cycle at 100% 180 A Open Circuit Voltage 50 VDC (12 VDC)* Welding Processes MMA, TIG Dimensions (H x W x D) 345 × 219 × 568 mm Weight 23.2 kg Features VDR Lift-Arc Hot-Start Arc-Force

Condition: new, Year of construction: 2024, Miller XMT 450CC/CV 400 Volt 63 AH Wind Tunnel Technology™ Protects electronic components from dirt, metal dust, and humidity. Adaptive Hot Start™ Ensures perfect ignition properties and prevents the electrode from sticking. Safety shutdown and error indicator For example, in case of malfunction in the primary power circuit, secondary power circuit, or overheating. Special selection option for VS wire feeders on the process selector switch For all wire feeders that operate with welding voltage, a favorable constant current characteristic (CV) and welding current output are automatically activated. Aluminum housing Lightweight, no corrosion in case of damage. Special arc control technology and Arcforce regulation Excellent control of the weld pool, even in the most demanding applications, especially for electrode types E 6010 and E 7010. Large LED display A/V Easy to read, option to preset welding parameters, hold function after the arc has extinguished. Arc cutting and beveling Due to high power and robust construction, very well suited for cutting and beveling operations. Parallel connection Two XMT 450 units provide 1200 A peak current. 14-pin remote control connection Remote control of welding current and welding current output. Lrjdezq Agfopfx Ai Hjr Applications Industrial applications Structural steel construction Shipbuilding Vehicle construction Rail construction Steel construction Pipeline construction Processes MIG/MAG welding SMAW (shielded metal arc welding) GTAW (gas tungsten arc welding) Flux-cored arc welding Beveling

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: WG002553, Make/model: MCWEL M630 ( Miller ) Rated DC output: 26.4kW Rated current: 550A Lodpfx Aovznbysi Herr Voltage: 20 – 45V Current range: 55 – 550A Rated duty cycle: 60% Applicable electrode: 1.6 – 8.0mm Engine model: F3L912 Rate output: 28kW /1800rpm, 60Hz Cooling system: air-cooled environment conditions Dimension: L – 1,525mm x W – 760mm x H – 1,050mm Weight: 900kg

Condition: new, Year of construction: 2026, operating hours: 5 h, functionality: fully functional, machine/vehicle number: MP2506992, input voltage: 400 V, total width: 960 mm, total length: 1,060 mm, total height: 2,250 mm, pressure: 200 bar, overall weight: 675 kg, stroke length: 200 mm, control voltage: 24 V, input frequency: 50 Hz, power: 2.2 kW (2.99 HP), pressing force: 6 t, Hydraulic Clinch Press Miller MP645E, with optional vibration conveyor and automatic feeding tool for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: Press force 2-57KN (6 ton) Throath depth 450mm Zylinder stroke 200mm Travel speed 110mm/sec. Cycle time 3sec. 1200/hour Size H 2250mm x W 960mm x D 1060mm Weight ca. 675 Kg Electrical connection 400V, 2.2 KW  Berghof PLC control system  In-house programming  Automatic press force adjustment with counter; position-based  Memory for up to 1,000 parameter sets and 200 programs  Electronic and mechanical safety system with distance monitoring  Safety electronics by MURR & EATON  Safe processing of conductive and non-conductive materials  Linear length measurement system  Electronic (indirect) press force measurement  Proportional valves for electronic press force control  Peripherals and digital I/O by Beckhoff  Made in Germany; in-house service support Optional Lsdpfsztcykox Ai Hsrr  Tooling set with 14 or 33 punches and dies  4-station die holder with position sensor; parameters for each of the 4 stations can be selected individually and stored in the program  Vibratory feeder for automatic transport of press-fit elements  Singulation and feed unit for automatic processing of clinch fasteners  Length measurement of automatically fed press-fit studs or bushings  Force/displacement diagram displaying the most recent press-fit data  Custom requirements—such as program selection via barcode scanning, production data output, etc.—can be programmed in-house  Adaptation to handling systems or robots possible; communication via PROFIBUS, PROFINET, EtherCAT, or Modbus We are happy to answer any questions you may have; on-site visits are possible by appointment. Guaranteed, lasting reliability through the use of high-quality components Simple handling and short changeover times Low maintenance and service requirements Very flexible due to the large number of possible applications Automatic feeding system, touch screen control etc. optional available Energy-saving, solid design with the energy efficiency of a hydraulic system Electronic and mechanical safety system for 100% safe processing of conductive and non-conductive materials Connection to the usual power supply (400V) Processing of all common press-in elements thanks to high press-in force, press-in nuts up to M12, threaded bushes up to M10, threaded bolts up to M8 Continuous adjustment of the press-in force, repeatability +/-1%

Condition: used, Flow monitor Ljdpfodnn Hwox Ai Hjrr -Volt: 24 V. -Dimensions: 105/105/H265 mm -Weight: 1 kg

Condition: ready for operation (used), Year of construction: 1990, Miller-Johannisberg 660 Specification Detail Process Heatset web offset printing Web Width 660 mm Ledpfx Ajyk Eg Nji Hsrr Cut-off 452 mm Colors/Units Typically configured with 5 printing units (works 4+4) Dryer VITS gas dryer Folder Capable of folding up to A5 size Controls Includes a control panel with register control Tension control system Baldwin dampening Chiller unit, plus chilling system before folder

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MP2510892, input voltage: 400 V, Hydraulic Clinch Press Miller MP645E, with vibration conveyor and automatic feeding tool for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: Press force 2-97KN (10 ton) Throath depth 650mm Lrjdoirnaqepfx Ai Hor Zylinder stroke 200mm Travel speed 110mm/sec. Cycle time 3sec. 1200/hour Size H 2140mm x W 1070mm x D 1550mm Weight ca. 1500 Kg Electrical connection 400V, 3.0 KW Guaranteed, lasting reliability through the use of high-quality components Simple handling and short changeover times Low maintenance and service requirements Very flexible due to the large number of possible applications Automatic feeding system, touch screen control etc. optional available Energy-saving, solid design with the energy efficiency of a hydraulic system Electronic and mechanical safety system for 100% safe processing of conductive and non-conductive materials Connection to the usual power supply (400V) Processing of all common press-in elements thanks to high press-in force, press-in nuts up to M12, threaded bushes up to M10, threaded bolts up to M8 Continuous adjustment of the press-in force, repeatability +/-1%

Condition: used, Year of construction: 1967, functionality: fully functional, machine/vehicle number: Nr.15862, empty load weight: 10,000 kg, overall weight: 10,000 kg, input voltage: 400 V, The Miller SY in the 76 x 104 cm format is a letterpress printing machine from the later phase of classic letterpress technology and is regarded as one of the most robust and precise machines of its time. Built in 1967, it belongs to the last generation produced before the shift to offset printing. As a result, this letterpress machine is technically highly refined and stands out for its particularly sophisticated mechanics and high build quality. This machine is excellently suited for creasing, perforating, die-cutting, as well as blind embossing, making it ideal for print shops and specialized finishing companies that value a reliable, versatile, and traditional work tool. Lredpfx Aiox Di Rdj Her