Used Milling And Boring Machine for sale (69,333)

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm Hedstv H Ucepfx Ad Uefd table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Hfedpfx Adsyahv Ss Ujd Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,000 h, functionality: fully functional, 1.1 Technical data: 1.1.1 Diameter of work-piece – mm– 1500 1.1.2 Height of work-piece – mm– 2800 1.1.3 Weight of work-piece (max)/ kg 2000 (at that maximum distance between the axes of castings is 1650 mm) 1.1.4 Energy demand 1.1.4.1 Electrical -Turbines – (8 pcs. х 22 kW– кВт) kW– 176 - Bucket elevator – (2 pcs. х 7,5 kW– кВт) kW– 15 - Rotation device of casting – (2 pcs.. х 0,75 kW– кВт) kW 1,5 - Double magnet drum-separator – (2 pcs.–шт. х 1,5 kW) kW 3 - Vibrating conveyor and sieve – (2 pcs. х 4 kW– кВт) kW– 8 - Dust aspiration – kW– 22 - Conveyor path – kW– 7,5 1.1.4.2 Compressed air demand – - pressure – bar 6 - quantity – m3/h 35 1.1.5 Abrasive charge – kg 8000 1.1.6 Projected productivity is 18-25 loads per hour (quantity of loads depends on the duration of cleaning chosen by operator and on chosen regime of work – finishing or rough treatment; thus, producer ensures productivity under performance specification not less than 22 castings per hour while descaling after normalization, annealing, as well as oxides, slag blanket, welded areas while finishing. – 1.2 Units of machine (given for each element separately) – 1.2.1 Machine house - Material of welded house – ST 54, thickness 16 mm - Wear plate material in house – manganese, thickness – 16 mm 1.2.2 Bucket elevator – (2 pcs. per machine) - Load capacity of 1 pc. – m3/h– 40 1.2.3 Shot material cleaner – (2 pcs. per machine) - Aspiration volume of 1 pc. – m3/h 2500 - Capacity of 1 pc. – t/h– 120 1.2.4 Double magnet drum-separator – Diameter mm– 300 1.2.5 Dosing bulk – (2 pcs. per machine) - Volume of 1 pc. – m3 0,7 - Dosing valve pneumatics (different for under and overhead turbines) – 1.2.6 Turbines – Турбины (8 pcs. per machine ) - number piece 8 - type ABR-501 - diameter– диаметр mm– 500 - wheel rotations/min 1/min– 2600 Hfsdpfxeymwxpo Ad Ujd - motor power kW– кВт 22 - abrasive capacity kg/min/each– 350 1.2.7 Conveyor-path - Load capacity per length kg/m– 3000 1.2.8 Movable trolley– (12 pcs.) - Load capacity ton 2 - Distance between the axes of hangers max 1650 mm 1.2.9 Dust aspiration - Air to be aspirated m3h 25000 - Filter tip APSZ 24 - Cartridge surface m2 504 - Fan motor power kW 22 1.2.10 Electrical box - mains voltage V 3 x 400 - control voltage V 24 - frequency Hz 50 1.2.11 Vibrating sieve load capacity – (2 pcs. per machine) t/hour 140

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,000 h, functionality: fully functional, 1.1 Technical data: 1.1.1 Diameter of work-piece – mm– 1500 1.1.2 Height of work-piece – mm– 2800 1.1.3 Weight of work-piece (max)/ kg 2000 (at that maximum distance between the axes of castings is 1650 mm) 1.1.4 Energy demand 1.1.4.1 Electrical -Turbines – (8 pcs. х 22 kW– кВт) kW– 176 - Bucket elevator – (2 pcs. х 7,5 kW– кВт) kW– 15 - Rotation device of casting – (2 pcs.. х 0,75 kW– кВт) kW 1,5 - Double magnet drum-separator – (2 pcs.–шт. х 1,5 kW) kW 3 - Vibrating conveyor and sieve – (2 pcs. х 4 kW– кВт) kW– 8 - Dust aspiration – kW– 22 - Conveyor path – kW– 7,5 1.1.4.2 Compressed air demand – - pressure – bar 6 - quantity – m3/h 35 1.1.5 Abrasive charge – kg 8000 1.1.6 Projected productivity is 18-25 loads per hour (quantity of loads depends on the duration of cleaning chosen by operator and on chosen regime of work – finishing or rough treatment; thus, producer ensures productivity under performance specification not less than 22 castings per hour while descaling after normalization, annealing, as well as oxides, slag blanket, welded areas while finishing. – 1.2 Units of machine (given for each element separately) – 1.2.1 Machine house - Material of welded house – ST 54, thickness 16 mm - Wear plate material in house – manganese, thickness – 16 mm 1.2.2 Bucket elevator – (2 pcs. per machine) - Load capacity of 1 pc. – m3/h– 40 1.2.3 Shot material cleaner – (2 pcs. per machine) - Aspiration volume of 1 pc. – m3/h 2500 - Capacity of 1 pc. – t/h– 120 1.2.4 Double magnet drum-separator – Diameter mm– 300 1.2.5 Dosing bulk – (2 pcs. per machine) - Volume of 1 pc. – m3 0,7 - Dosing valve pneumatics (different for under and overhead turbines) – 1.2.6 Turbines – Турбины (8 pcs. per machine ) - number piece 8 - type ABR-501 - diameter– диаметр mm– 500 - wheel rotations/min 1/min– 2600 - motor power kW– кВт 22 - abrasive capacity kg/min/each– 350 1.2.7 Conveyor-path - Load capacity per length kg/m– 3000 1.2.8 Movable trolley– (12 pcs.) - Load capacity ton 2 - Distance between the axes of hangers max 1650 mm 1.2.9 Dust aspiration - Air to be aspirated m3h 25000 - Filter tip APSZ 24 Hedpoymww Ssfx Ad Uofd - Cartridge surface m2 504 - Fan motor power kW 22 1.2.10 Electrical box - mains voltage V 3 x 400 - control voltage V 24 - frequency Hz 50 1.2.11 Vibrating sieve load capacity – (2 pcs. per machine) t/hour 140

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: Hjdpfxjx D Tbms Ad Ujfd 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Hedoxxb Rrjpfx Ad Ujfd Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 42,832 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, controller model: FANUC SERIES 18i MB, clearance between the columns: 2,300 mm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 2,100 mm Travel Z-axis: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Maximum table load: 10,000 kg Spindle taper: ISO-50 Standard spindle speed: 6,000 rpm Max. tool diameter / with empty magazine slot: 127 mm / 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Tool changer capacity: 32 tools Rapid traverse (X-axis): 20,000 mm/min Rapid traverse (Y-axis): 15,000 mm/min Hjdpfx Ajymxi Asd Ujfd Rapid traverse (Z-axis): 15,000 mm/min Feed rate: approx. 1 – 10,000 mm/min MACHINE DETAILS CNC control: FANUC SERIES 18i MB Spindle motor power (continuous / 30 min): approx. 22 / 26 kW Operating hours, feed time: 42,832 h Operating hours, automatic mode: 53,246 h EQUIPMENT Automatic head changer (with angular milling head) RENISHAW probe

Condition: not inspected (used), Year of construction: 1968, functionality: unexamined, machine/vehicle number: 70013, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 32 rpm, controller manufacturer: HEIDENHAIN, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 08.04.26 and 16.04.26! TECHNICAL DETAILS Hfjdpfx Ajyk Ufned Uod X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 300 mm Spindle speed range: 32 to 1,600 rpm Table dimensions: 590 x 430 mm Jaw width: 160 mm MACHINE DETAILS Control manufacturer: HEIDENHAIN Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 1,800 mm Machine weight: 1,500 kg EQUIPMENT Three-axis digital readout Workshop drawer cabinet with matching accessories

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, controller model: PHILIPS, jaw width: 125 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Bids are binding and require timely collection between 08.04.26 and 16.04.26! TECHNICAL DETAILS Hsdpfsyk Thujx Ad Ujfd Travel X-axis: 400 mm Travel Y-axis: 400 mm Travel Z-axis: 300 mm Table dimensions: 550 x 280 mm Jaw width: 125 mm Tool holder: SK 40 MACHINE DETAILS Control: PHILIPS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 50 A Dimensions & weight L x W x H: 3000 x 2000 x 1800 mm Machine weight: 1500 kg EQUIPMENT Table with 4 T-slots Fitted vice Documentation

Condition: repair required (used), Year of construction: 2014, operating hours: 23,000 h, functionality: not functional, machine/vehicle number: 21066714, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: Siemens Sinumerik 840D sl, TECHNICAL DETAILS Travel X-axis: 2,000 mm Hfedpfxeyq Ra Uo Ad Uod Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control model: Siemens Sinumerik 840D sl Operating hours: 23,000 h EQUIPMENT Swiveling spindle External cooling unit (manufacturer: Pfannenberg) Note: There is a fault in the control system. It does not respond to any inputs. Repair by Siemens Service is required!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 53,216 h, functionality: fully functional, machine/vehicle number: 22024211, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control model: BWO CNC Operating hours: 53,216 h EQUIPMENT 5 compact clamps (Model: Kopal Duo) Custom machine enclosure Swiveling spindle External chiller (Manufacturer: Pfannenberg, cooling capacity: 1.7 kW) Hfedpfeyq Nx Nsx Ad Ujd

Condition: ready for operation (used), Year of construction: 2008, operating hours: 73,695 h, functionality: fully functional, machine/vehicle number: 22021508, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: BWO RC, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse speed X/Y-axis: 60 m/min Rapid traverse speed Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control unit: BWO RC Operating hours: 73,695 h EQUIPMENT Swiveling spindle Coolant system (MMS) External chiller unit (Manufacturer: Maka) New ball screw for Z-axis, installed by Maka Service in 2024 Hfodpsyq Nx Aefx Ad Usd

Condition: ready for operation (used), Year of construction: 1992, operating hours: 10,643 h, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 815 mm, travel distance Z-axis: 815 mm, rotational speed (max.): 3,600 rpm, controller model: Heidenhain iTNC 530, A retrofit of the machine was carried out in 2010! TECHNICAL DETAILS Travel range X-axis: 1,500 mm Travel range Y-axis: 815 mm Travel range Z-axis: 815 mm Clamping table: 3,250 x 815 mm Table load capacity: 5,000 kg Quill stroke: 150 mm Spindle: SK 50 Speed range: 40–3,600 rpm MACHINE DETAILS Control: Heidenhain iTNC 530 Milling heads: Usable as single, double, triple, or quadruple head Total power requirement: 44 kW Dimensions & Weight Required space: approx. 8 x 4 x 4.5 m Transport dimensions base unit: approx. 6 x 3 x 3.5 m Hfodpfeyrdxtex Ad Uod Control cabinet: approx. 2.6 x 0.6 x 2.6 m Machine weight: approx. 20 t Operating Hours Control operating hours: 20,987 h Machine operating hours: 19,703 h Program run time: 10,643 h EQUIPMENT Hydraulics Various sheet metal parts

Condition: ready for operation (used), Year of construction: 1991, operating hours: 910 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 4,000 rpm, controller model: TNC 426 / 430, The machine control was renewed in 2004! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 450 mm Travel Z-axis: 500 mm Additional travel: 160 mm Spindle diameter: 95 mm Spindle taper: SK 40 Spindle speed range: 25 - 4,000 rpm Table dimensions: 730 x 630 mm MACHINE DETAILS Control: TNC 426 / 430 Total power requirement: 5 kW Dimensions & Weight Space requirement: approx. 4.5 x 3 x 3 m Transport dimensions: approx. 4 loading meters, height: 2.60 m Machine weight: approx. 5,000 kg Operating hours: 3,628 h Program hours: 910 h Hedpfxjyrdv Ss Ad Uefd EQUIPMENT Electronic handwheel Documentation

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Travel X: 6000 mm Travel Y: 2500 mm Travel Z: 950 mm Column spacing: 2400 mm Table: 6000 x 2100 mm Automatic milling head: 2.5° Spindle speed: 3200 rpm Feed rate: 10 m/min Machine weight: approx. 35 tons Hsdpoyf A H Nofx Ad Uefd

Condition: used, Year of construction: 2007, x-travel 200 mm Hjdpfx Asyrh Avjd Usfd y-travel 200 mm z-travel 400 mm Control Siemens 840 D total power requirement 84 kW weight of the machine ca. 13 t

Condition: good (used), Year of construction: 2003, x-travel 500 mm y-travel 500 mm z-travel 420 mm Hfodpfx Ajymqxcsd Usd Control Heidenhain / Millplus total power requirement 35 kW weight of the machine ca. 5,7 t

Condition: good (used), Dumor Lightning Fold Pro 8335B+33KF Automatic Creasing and Folding Machine The machine is fully operational and ready to use. Manufactured in 2018. Hsdpfxsyur Axj Ad Usfd This is the most efficient creasing and folding system on the market, with a robust construction. High-stack vacuum feeding. Built-in vacuum and suction systems. An instruction manual is included. The 7-inch color Smart Screen programmer allows for easy machine setup. Technical specifications: Paper thickness: 0.15-0.35 mm Feeder capacity: 100 mm Accuracy: +/- 0.5 mm Format range: 140×160 mm, 330×650 mm Paper type: coated, uncoated, laminated, UV varnished, photo Creasing blade width: 1.0 mm, 0.6 mm, and 1.4 mm Speed: 6300 sheets/hour (A4/1 fold) Number of creasing strokes per pass: up to 32 (creasing-only mode) Control: dual 7-inch touchscreen Predefined fold types: 7 types + custom folds Number of folds: 1 or 2 Folding method: folding knife Automatic paper length measurement: YES High-performance upper suction feeder: YES Patented breaker knife system: YES Creasing depth adjustment: YES Weight: 280 kg,

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. Hfjdpfx Adeh Aw Rno Uod As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: like new (used), Year of construction: 2020, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 5645, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, total length: 6,550 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 15,900 mm, spindle speed (max.): 4,000 rpm, total height: 11,500 mm, overall weight: 57,000 kg, working range: 2,500 mm, grinding spindle motor power: 46,000 W, Ladies and Gentlemen, Hodpsttri Tofx Ad Ujfd Enclosed we advertise our portal bed milling machine. Installation winter 2019/2020. 12,000 operating hours. Price on request. The machine is currently still in operation. The price is for the machine only. Dismantling, transportation and installation are the responsibility of the buyer. We are looking forward to serious inquiries. Many thanks in advance.

Condition: used, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, height adjustment type: mechanical, overall weight: 450 kg, – Italian production – year of production 2016 – pre-milling – DTR, CE Hfjdpfx Ajwb Ha Tjd Ued TECHNICAL PARAMETERS: – edge thickness: 0.5 - 3 mm – wooden edgeband: 0.5 - 5 mm – element height: 8 - 50 mm – minimum edgebanding length: 160 mm – minimum board width: 110 mm – feed speed: 7 m/min – pre-milling – radial cutters – edge cutting – radial scraper – straight scraper – blower for each unit – working pressure: 8 bar – working machine length: 2030 mm – transport dimensions (length/width/height): 330/80/125 cm – weight: 450 kg

Year of construction: 2013, condition: ready for operation (used), This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Application Types Hfedpfox D S Ekox Ad Uod Milling

Year of construction: 1975, condition: ready for operation (used), travel distance X-axis: 8,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,150 mm, overall weight: 20,000 kg, spindle motor power: 11,000 W, number of axes: 3, General Data Machine weight 20000 kg Hodpfsx D Dq Esx Ad Usfd Main Drive Number of axis 3 Spindle motor power 11 kW Tool taper ISO 50 Movement X-Axis Movement 8000 mm Z-Axis Movement 1150 mm Y-Axis Movement 950 mm This 3-axis Butler CS10 Bed Type Milling Machine was manufactured in 1975. It features a large 10,000 mm table length, 1030 mm table width, and a robust ISO 50 spindle taper. The main motor power is 11 kW, ensuring heavy-duty machining capability. It also includes original Elgamill guides for precise column travel. Consider the opportunity to buy this Butler CS10 Bed Type Milling Machine. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2010, functionality: fully functional, Worktable size: 316 x 436 mm Hedsyr Ntpspfx Ad Uefd Digital display Travel X, Y: 250 x 350 mm Diameter of electrode: Ø 0.4 mm; Ø 0.5 mm; Ø 1.0 mm; Ø 2.0 mm Z1 stroke: 300 mm Tank capacity: 25 l Machine size: 1060 x 750 x 2100 mm Machine weight: 600 kg

Condition: new, Year of construction: 2025, functionality: fully functional, table size: 800 x 240mm table longitudinal movement range: 400 mm table transverse movement range: 230 mm max. drilling diameter in normal steel D30 mm max. drilling diameter at horizontal head D25 mm distance between table plane and spindle face 60 – 360 mm speed range: 80 – 2200 rpm max. vertical spindle speed 100 – 2000 rpm max. horizontal spindle speed 60 – 1350 rpm spindle taper ISO40 spindle stroke 120 mm power 2.2 / 1.5 kW drilling capacity dia. 50 mm thread drilling capacity max. M16 Hedpjyr Ib Ejfx Ad Uofd dimensions 1300 x 1100 x 2200 mm (w x d x h) weight approx. 900 kg Accessories - 3-way SINO DRO system - 90 degree rotatable head bracket - 2 reducers (ISO40/MK3, ISO40/MK2) - drill head with shank, diameter 3 – 16 mm - 2 horizontal milling spindles - 1 15-piece chuck set diameter 2 – 26 mm - work lamp - cooling water system