Used Milling Machine Cnc for sale (83,384)

Condition: excellent (used), Year of construction: 2017, operating hours: 10,240 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: Heidenhain, spindle speed (max.): 15,000 rpm, operating hours of spindle: 10,400 h, We offer in good condition DMG Mori DMF 360-11 4-axis milling machine. X-Axis travel: 3600 mm Y-Axis travel: 1100 mm Z-Axis travel: 900 mm Spindle has been changed 2000 hours ago due to short circuit (no crash) HSK-A63 15.000 RPM spindle 46kW / 61.7 hp - 200 Nm Machine has following options: Dodpsxqa I Hjfx Ag Rsul Swivel head Heidenhain Touch probe TS 642 Automatic door Internal coolant 40 bar with paperbelt filter

Year of construction: 1990, condition: good (used), CNC milling machine Fab.TOS type: FGS40CNC Control Haidenhein TNC 355 BJ. 1990 Djdpfx Aedtfhqsg Rsul Procedures: X1000mm Y500mm Z500mm Spindle retainer: ISO 50.

Condition: ready for operation (used), CNC Bed Type Milling Machine Make SECMU model C6 Table Size 2200 x 700 X travel 2000 Y travel 1200 Z travel 1000 ATC 60nos. complete with universal milling head Djdpfx Ajxdduwjg Rjul

Condition: good (used), Year of construction: 2003, driven tools, Y-axis, B-axis TRAUB TX8 H control Turning diameter max 275 mm Turning length -450 mm Dsdpfxsx A Evmj Ag Rjul Spindle speeds 5'600 rpm Turret head 12 driven positions Barloader Piece catching device Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2014, functionality: fully functional, ✅ Brand: FERMAT ✅ Type: CNC Boring Machine ✅ Model: WFT 13 R CNC ✅ X Travel: 2000 mm Dujdpfx Aswl Er Neg Rol ✅ Y Travel: 2000 mm ✅ Year: 2014

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Duodsw Nklhspfx Ag Rjl Good condition

Year of construction: 2023, condition: used, machine/vehicle number: 23091433, HEIDENHAIN control, clamping table approx. 1,000x4,200 mm, travel (X/Y/Z): approx. 4,000/1,500/1,300 mm, 24-position tool changer, URRETXU MAQ 1433 chip conveyor, year of manufacture: 2023, serial no.: PL020646, EATA EL3-R5/VERT industrial cooler, year of manufacture: 2023, serial no.: 31842, REXROTH hydraulic unit, safety enclosure Dodpfx Aex Akl Heg Rsul

Year of construction: 2001, condition: good (used), CNC bed type milling machine Fabr.IBERIMEX-MVR Type: UH-1250 BJ. 2001 Control HEIDENHAIN TNC124 Procedures: X1250mm Y500mm 460 mm Clamping table: 360mmX1800mm Dodpfx Ajd Eraneg Reul Spindle retainer: ISO50 Machine with full enclosure. Machine card see more data. Machine in good condition.

Condition: used, Technical specifications: 1. Model: Shinohara SR-2 CNC 3-Axis Machine Country of origin: Japan 2. Control system: Siemens 808D (brand new, year of manufacture 2023) 3. Cutting length (rack): max. 1500 mm 4. Cutting width (rack): max. 250 mm 5. Max. module: 8 module 6. Max. helix angle for cutting: 30 degrees PA 7. Diameter of milling spindle: 31.75 mm 8. Cutter diameter: 100–130 mm 9. Max. cutter width: 60 mm - Brand new hydraulics and CNC systems. - Gib and worm backlash adjustments have been carried out. - Replacement of defective bearings and elimination of oil leaks. - Complete recertification to ISO alignment standards for CNC rack milling machines. - Upgrade to three-axis CNC control with Siemens 808D, digital drives, and AC servo motors. - Replacement of old Japanese controls with Siemens technology. - No change gearbox required thanks to CNC capabilities, based on Sykes know-how and the expertise of an English company. Dedpfx Agsx Nf Ewo Rjul - Realignment to the Siemens 808 Advanced System in compliance with Shinohara company standards. CNC capabilities: - Can cut both straight and helical racks. - Helix angle is visible in the DRO system in addition to CNC controls. Advantages of the CNC retrofit: - Precision and repeatability when milling racks. - Increased flexibility thanks to three-axis control. - Efficient production due to elimination of gear changes. - State-of-the-art Siemens technology.

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Turning diameter max 250 mm Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Tool presetting device Barloader Piece catching device Misc. accessories Duedpfx Ajx A Eupsg Rsl MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2013, operating hours: 4,951 h, functionality: fully functional, machine/vehicle number: 1002823, travel distance X-axis: 1,020 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 240 mm, total height: 2,000 mm, total width: 2,000 mm, total length: 3,500 mm, table width: 1,000 mm, table length: 1,400 mm, table height: 960 mm, table load: 200 kg, overall weight: 2,000 kg, operating hours of spindle: 2,803 h, DATRON M 10 PRO A CNC Milling Machine - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Rated current: 16 A - Operating pressure: 7 - 10 bar - X-axis travel: 1020 mm - Y-axis travel: 830 mm - Z-axis travel: 240 mm - X and Y travel limited by tool changer: 1020/720 mm - Gantry clearance: 200 mm - Bushing distance: 100/100 - Table cut-out width/depth: 630/348 mm - Table width: 1000 mm - Table depth: 1400 mm - Table height: 960 mm - Max. table load: 200 kg - Distance to outer edge: 175/148 mm - Recorded machine operating hours: 4951 h - Spindle running time: 2803 h The machine is equipped with a tool presetting device from manufacturer SCHUNK, type TRIBOS. Includes various holders and a vacuum pump. Dsdpfsxxwxfsx Ag Rsul FCA D-01237 Dresden – loaded on truck

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Duodpfxotrhq Ho Ag Rel Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Year of construction: 2023, condition: used, machine/vehicle number: 23051428, HEIDENHAIN control, clamping table approx. 850x2,700 mm, travel paths (X/Y/Z): approx. 2,500/1,000/1,100 mm, 24-position tool changer, chip conveyor URRETXU MAQ 1421, year of construction: 2023, serial no.: PL0000073, industrial cooling EATA EL3-R5/VERT, year of construction: 2023, serial no.: 32011, REXROTH hydraulic unit, safety enclosure Djdpox Aklyefx Ag Rsul

Year of construction: 1988, condition: good (used), CNC universal console milling machine Fabr.KLOPP Type:FWS15 Bj.88 CNC contouring control Heidenhain TNC 155. Travel:X1170mm Y:420mm Z:420mm Aufspanntisch:1500X400mm Spindle mounting:SK50 Spindle power:15KW Spindle speed:35-3550rpm Counter bearing for horizontal milling, cooling device, spittoon, Dodpfsbu Em Asx Ag Rjul Various tool holders, Complete machine documentation. Machine immediately ready for use Workshop tested. New parameters and batteries on 20.08.2020 Installed. Good general condition. Machine can be run under current.

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control system: HEIDENHAIN TNC 426 Dusdpfx Agsv Rxa Sj Rel Working range X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 – 6,300 rpm Tool holder: SK 40 M & H 3D probe (for part touch-off) Vertical-horizontal milling attachment Boring quill Coolant system Angle table: 900 x 458 mm Weight: 4,000 kg Machine dimensions (LxWxH) approx.: 3,900 x 2,000 x 2,000 mm

Condition: ready for operation (used), total height: 3,870 mm, total width: 3,417 mm, total length: 10,994 mm, controller manufacturer: Heidenhain, empty load weight: 23,500 kg, 4 assen gelijktijdig + B- en C-as hoge druk koeling door spindel (20 bar) Dodpexbukwsfx Ag Roul 4e as op tafel (zowel horizontaal als verticaal) centraal smeersysteem Gereedschapswisselaar met 40 posities Spaantransportband Longitudinal travel X-axe: 6000 mm Crosstravel Y -axe: 1200 mm Travel Z-axe (Height): 1500 mm Power on spindle: 36 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 40 > 3000 rpm

Year of construction: 1999, condition: used, CNC Steuerung Heidenhain TNC 426 Kuehlmitteleinrichtung Spaenewanne Duodpedk Rwnofx Ag Rel CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg

Condition: excellent (used), CNC Milling Machine PMER type DPM Model: DPM Specifications - CNC Milling Machine PMER type DPM Designation: CNC milling machine X travel: 780 mm Y travel: 410 mm Z travel: 550 mm CNC control: Proto Trak MX3 Spindle taper: ISO 40 Spindle quill travel: 120 mm (manual) Djdpfsx Drybox Ag Rsul Spindle speed: 70 – 3800 rpm Table size: 1270 x 320 mm Max. spindle nose/table distance: 500 mm Min. spindle nose/table distance: 100 mm Tilting head right/left Other: Jog handwheel Other: Manual operation possible Other: (using handwheels) or controlled by CNC Machine equipped with lubrication pump Voltage: 380 V Width: 1900 mm Depth: 2100 mm Total height: 2500 mm Weight: 2.5 t

Year of construction: 2023, condition: used, machine/vehicle number: 23071429, HEIDENHAIN control, clamping table approx. 3,200x1,000 mm, travel (X/Y/Z): approx. 3,000/1,500/1,300 mm, 24-position tool changer, industrial cooling EATA EL3-R5/VERT, hydraulic unit REXROTH, chip conveyor URRETXU MAQ 1429, year of manufacture: 2023, serial no.: PL020644, safety enclosure. Dodpex Akltefx Ag Roul

Condition: good (used), Year of construction: 1986, CNC universal milling machine DECKEL Type: FP5NC Year 1986 Control DIALOG 4 Dodpodtdahsfx Ag Rsul Only spare parts Please ask what you need.

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swiveling table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Djdpjv Rpr Sefx Ag Reul Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm

Condition: ready for operation (used), controller manufacturer: Heidenhain, Type: ML120-12000 6 assen gelijktijdig (X / Y / Z / W / B / V) + 2-assige indexeerfreeskop (2,5°) 8 assen gelijktijdig (X / Y / Z / W / B / V) + continue orthogonale freeskop (A: +-120° / C: +-180°) Zware CNC-frees- en boormachine / CNC-vloerboor- en freesmachine ramgrootte: 630 x 500 mm - ramslag: 1250 mm spindeldiameter 130 mm - slag: 650 mm - zonder freeskop te gebruiken als boor CNC continue orthogonale freeskop (A: +-120° / C: +-180°) CNC indexeerfreeskop (2,5°) gereedschapswisselaar voor het automatisch wisselen van twee freeskoppen koeling door spindel gereedschapswisselaar met 60 posities spaantransportband Siemens aandrijvingen en motoren Heidenhain regel- en meetlinialen gewicht van de machine: 60 ton afmetingen van de machine: 19 meter x 12 meter x 6,65 meter TIRT3025 CNC draaitafel continu: - max. 60 ton werkstukgewicht Duodpfx Aexpgf Neg Rjl - hydrostatische tafel - afmetingen: 3000 x 2500 mm - slag of draaitafel: 2500 mm - max 2 toeren per minuut - gewicht van de tafel: 37 ton - afmetingen: 6500 x 2500 x 1500 mm 3 T-sleuftafels - 7600 x 2800 mm - 7600 x 2480 mm - 4300 x 1800 mm - gewicht van de tafels: 50 ton Fresatrice a montante mobile - Freesmachine met mobiele kolom - Fraiseuse-aleseuse avec montant mobile - Fräs-Bohrmaschine mit beweglichem Ständer Longitudinal travel X-axe: 12 000 mm Crosstravel Y -axe: 1250 mm (ram-travel) Travel Z-axe (Height): 3500 mm Power on spindle: 37 kW Admission in millingheadspindle (ISO): ISO 50 Max quill travel Z': 1250 + 650 mm Max speedrange: 6 > 2000 rpm

Condition: good (used), Year of construction: 1988, CNC milling machine MAHO Type: MH 500 W Year 1988 Heidenhain TNC 232 B control. With counter bearing for horizontal milling. Spindle mounting: ISO 40 spindle speed stepless 20 - 4000 rpm feeds : 1-3000 mm / min Travels : X 500 mm Y380 mm Z 350mm Table : 700 mm X 350 mm Weight.ca.2000kg. Machine documentation available Machine is ready for demonstration. Djdpfx Ajich Ehjg Rjul

Condition: defective spare-parts repository (used), Year of construction: 1990, spare parts CNC milling machine DECKEL FP5CC/T year 1990 spare parts Dedpfxjfgvu Uj Ag Roul How. Control DIALOG 11 Switch cabinet Complete Milling spindle vertical and horizontal ISO 40 Universal rotary tilting table Tool magazine with changer Chip conveyors, motors, U.S.W. Please ask for request.

Year of construction: 1993, condition: good (used), CNC universal milling machine DMG MORI Type: MH 600 C Control MAHO 532 year 1993. Djdpfxjiihxho Ag Rjul with automatic swivel milling head G17/G18 and B -axis rotary table. Without tool changer. Further data see data sheet. Complete machine documentation and data backup available. Good general condition.