Used Mini Mill Haas for sale (254)

Condition: used, Year of construction: 2012, x-travel 762 mm y-travel 508 mm z-travel 508 mm Control Haas CNC Max. rpm 12.000 min/-1 Kodoxddrpepfx Aanjfa power capacity - main spindel 22,4 kW max. Torque 102 Nm tool taper ISO 40 table surface area 914 x 457 mm T-slots 16 mm max. table load 1362 kg number of toolpositions 24 pos. tool taper SK 40 max. tool diameter 76 (152) mm max. tool weight 5,4 kg change-time tool to tool 2,8 sec change-time chip to chip 3,6 sec rapid traverse ( X / Y / Z ) 18,0 m/min Number of working hours 14375 h spindle drive 22,4 kW weight of the machine ca. 3,42 t dimensions of the machine ca. 3,2 x 2,5 x 2,8 m Well-maintained 5-axis machining center, 3-axis machine + 2-axis dividing head. Machine with low operating hours (14,375). Lehmann dividing head, model ix-Y3, weight 80 kg. Machine dealer with own stock of 1600 m².

Year of construction: 2009, condition: used, NH3 refrigeration system. Refrigeration system includes the following: - Compressor 1, GEA Grasso type OS3 - Compressor 2, GEA Grasso type OS3 - NH3 separator - Air condenser - Heat exchanger for energy recovery with pump - 2 x ice water pumps - Brewing water pump - 2 water coolers - Expansion tank with control cabinet for NH3 separator and compressors 1 and 2, with SIMATIC MULTI PANEL touch control Additional title: refrigerant ammonia Ksdpfx Aaoxbn Upenofa Brew water flow: 5 m3/h 2 bar Ice water flow: 15 m3/h 2 bar Refrigerant capacity: 85 kg Ammonia Compressor capacity: 145 m³/h Power: Q0: 2 x 119 kW Operation / Control: Siemens S7 Features: 2 x compressors: 145 m³/h, 26 kW with Frequency Converter, 37 kW nominal output; ammonia separator mounted on frame, with brewing water-cooler and ice water-cooler; air condenser on frame 3 x 2.95 kW; heat-exchanger for recovery with pump; 2 x ice water pumps ( 2.2 kW, 15 m3/h, 2 bar ); brewing water pump ( 1.1 kW, 5 m3/h, 2 bar ); expansion tank, max. permissible operating pressure: high pressure side: 22 bar, low pressure side: 16 bar

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: 3480, total height: 2,789 mm, total length: 2,525 mm, total width: 2,400 mm, overall weight: 8,500 kg, Number of CNC axes (X/Y/Z/A/B/C): 5 to 6 Travel paths (X/Y/Z) [mm]: 630 / 345 / 430 Max. speed (X/Y/Z) [m/min]: 30 / 30 / 30 Swivel angle grinding spindle +/- (C axis): -225° to 70° Drive power grinding spindle [kW]: 11 / 11.5 / 21 Spindle speed range [min-1]: 0 to 8,000 / 18,000 / 30,000 Grinding wheel diameter [mm]: 250 Kjdexqg Igspfx Aansfa Abrasives: All types of abrasives Grinding length [mm]: 500 Workpiece length [mm]: 550 Workpiece cutting diameter [mm]: 260 Workpiece spindle taper: SK50 / HSK80/63/50 / Form A and E Control: Sinumerik One

Condition: good (used), Year of construction: 2011, Haas VF 3 optionally with automation, Year of manufacture 2011 / Automation 2005, Haas control, Travel X/Y/Z 1016/508/635 mm, 40-position tool changer, BT 40 spindle taper, Spindle speed up to 10,000 rpm, Tool measurement, 3D probe, Automation interface, Automatic door, Oil mist extraction, Internal coolant supply, Kfjdpfx Aaoxltfuenoa OPTIONAL WITH AUTOMATION: 3-axis robot, System 3R SWE, Year 2005, 1 magazine – 20 pallets, 20 pallets System 3R GPS 240, Clamping plate 20 – M 10, Modular vise/clamping block, fixed block unit, Setup station, Zero-point clamping system 3R GPS 240,

Condition: good (used), Year of construction: 2014, HAAS VF1 (2014) • Manufacturer: HAAS • Model: VF-1 • Year of Manufacture: 2014 Kedov Iywmjpfx Aanofa • Machine Type: Vertical Machining Center Technical Data: • Travel (X / Y / Z): 508 x 406 x 508 mm (20” x 16” x 20”) • Table Size: 660 x 356 mm (26” x 14”) • Maximum Table Load: 1,360 kg (3,000 lbs) • Spindle Speed: Up to 8,100 RPM (optional 10,000 or 15,000 RPM) • Spindle Taper: 40 Taper • Spindle Power: 22.4 kW (30 HP) Vector Drive • Tool Changer Capacity: 20+1 (Carousel Type) • Rapid Traverse Rates: 25.4 m/min (1,000 in/min) • Cutting Feed Rate: 12.7 m/min (500 in/min) • Automatic Tool Changer: Yes • Coolant System: Standard Flood Coolant System • Control System: Haas CNC Control • Machine Weight: Approx. 3,630 kg (8,000 lbs)

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle Kfjdpfxsxrf Stj Aanea • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: used, X Axis 30.0 in 762 mm Y Axis 16.0 in 406 mm Z Axis 16.0 in 406 mm Read for inspect Ready for delivery Ksdpoiypzdjfx Aanofa

Condition: used, Model: David 200 Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Length: 340 Kedpfxjtq T Tkj Aanefa Height: 250

Condition: like new (used), Year of construction: 2022, Controller HAAS (LCD screen, 1 Gb memory, touch screen, WIFI) Table size D400 mm Table load 227 kg No of T slots 5 X travel 610 mm Y travel 406 mm Z travel 406 mm B axis tilting +120 / - 35 degree C axis rotation 0 - 360 degree Distance between the spindle and table surface 102 - 508 mm Spindle speed 15000 rpm Spindle power 22,4 kW ATC magazin 50+1-fold Toolholder HSK-A63 Rapid speed X/Y/Z 30,5 m/min Feedrate 16,5 m/min Weight 5400 kgs Machine dimensionen LxWxH 2900 x 2280 x 2520 mm Kjdpfolaxu Dsx Aansfa Features, accessories - CTS 69 bar - Coolant unit - Extra filter system on coolant unit - Dinamical zero point shift / toolpoint programming - Intelligent over voltage protection - Ethernet interface - HAAS Connect, remote control - HAAS Drop (Wifi Data transfer) - High Speed machining - Media show during working by M130 - Rigid tapping - Protection from over voltage - Chip conveyor - Programmable coolant nozzles - Air through the spindle Two idencital machines are for sale. Ready to buy immediately.

Condition: used, Year of construction: 2016, feed length X-axis: 711 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, Traverses X Y Z ; 711 x 406 x 394mm, Table size 864 x 381mm, table load 113 kgs, rapid feedrates 61m/min, spindle power 15Hp, spindle speed 15,000rpm, spindle taper BT40, 18 station ATC, Haas control, coolant, swarf auger. Kfodpfov Sut Rex Aansa

Condition: excellent (used), Year of construction: 2022, Technical Specification of HAAS UMC-750 (2022) • Manufacturer: HAAS • Model: UMC-750 • Year of Manufacture: 2022 • Machine Type: 5-Axis Universal Machining Center Technical Data: • Travel (X / Y / Z): 762 x 508 x 508 mm (30” x 20” x 20”) • Table Size: 630 mm diameter (24.8”) • Maximum Table Load: 300 kg (660 lbs) • Spindle Speed: 12,000 RPM (optional 15,000 RPM) • Spindle Taper: 40 Taper (inline direct-drive) • Spindle Power: 22.4 kW (30 HP) vector drive • Tool Changer Capacity: 30+1 (optional 50+1) • Rapid Traverse Rates: 30.5 m/min (1,200 in/min) • Cutting Feed Rate: 12.7 m/min (500 in/min) • B-Axis Travel (Tilt): +110° to -35° • C-Axis Travel (Rotation): 360° continuous • Automatic Tool Changer: Yes • Coolant System: Standard flood coolant with optional Through-Spindle Coolant (TSC) • Chip Management: Programmable chip auger or conveyor Kodpfev Izg Nex Aansfa • Control System: Haas CNC Control with Wi-Fi and Ethernet connectivity • Machine Weight: Approx. 6,350 kg (14,000 lbs)• 25 micron filter • Chip conveyor belt • Spindle center coolant pressure 300 psi • Wireless tool and workpiece probe • Side tool changer, ISO 40 taper, 30+1 tools • Synchronized threading • Rotary scale

Condition: excellent (used), Year of construction: 2012, Haas Vf4SS Year of manufacture 2012 12,000 rpm BT 40 40+1 tool changer With 4th axis Kfsdpfxoxnpuwe Aanea Renishaw Very good condition! Videos available.

Condition: ready for operation (used), Year of construction: 2011, Travel X/Y/Z: 1000mm/500mm/635mm, tool holder: BT40, spindle speed: 10000rpm, tool positions: 40, control: Haas, spindle hours: approx. 4500h. 3-axis robot System 3R WorkPartner, year of manufacture: 2005, transfer weight: 80kg, stroke: 1500mm, pallet positions: 20. Including System 3R GPS 240 zero-point clamping system, tool measurement, tool breakage control, Renishaw 3D probe, and oil mist extraction. Documentation available. An on-site inspection is possible. Kfsdpfx Aexg Riajanoa

Condition: used, Type: David Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Lenght: 340 Kjdpfxeg Swz Hs Aanjfa Height: 250 Delivery time: after advanced payment, the machine is generally refurbished and ready for delivery

Condition: excellent (used), Year of construction: 2023, operating hours: 1,168 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Z axis travel 355 mm Bar Capacity 44mm Spindle Speed 6000 rpm Spindle Nose A2-5 Rapid Feedrates X/Y/Z = 30,5 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Weight 3200 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Without tailstock - Foot pedal - Machine mounts - Manuals Kfsdpfowvgbyex Aanoa The machine is barelly used and is in great technical and optical condition.

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, rapid traverse X-axis: 15,200 m/min, rapid traverse Y-axis: 15,200 m/min, rapid traverse Z-axis: 15,200 m/min, tool length: 406 mm, tool diameter: 127 mm, tool weight: 5,500 g, General Technical Data Sheet Brand: HAAS Model: VF-6B/40HE Category: Vertical Machining Centres Year of manufacture: 2004 CNC Control: HAAS CNC Machine weight: 10,116 kg Machine Dimensions: Length: 4,900 mm Width: 2,800 mm Height: 3,300 mm Spindle Taper size: ISO-40 Spindle speed: 10,000 rpm Spindle motor power: 15 kW Working Capacity X-axis travel: 1,626 mm Y-axis travel: 813 mm Z-axis travel: 762 mm Distance between spindle nose and table surface: 102 – 864 mm Table Table dimensions: 1,626 x 711 mm Maximum table load: 1,814 kg Feed Rates Rapid traverse (X / Y / Z): 15,200 mm/min Working feed (X / Y / Z): 12,700 mm/min Tool Changer Tool taper: DIN 69871-A40 Tool holder shank: DIN 69872-A40 Tool magazine capacity: 24 positions Max tool diameter (adjacent tools / empty pockets): Ø67 mm / Ø127 mm Max tool length: 406 mm Max tool weight: 5.5 kg Kodpoxfavysfx Aansfa Additional Equipment Contact tool setter installed on the table with RENISHAW workpiece probe High-pressure coolant pump through spindle Coolant catch tank with wash-down pump Screw-type chip conveyor Manuals, electrical diagrams, and CE Declaration included

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,500 kg, table width: 1,219 mm, table length: 457 mm, TECHNICAL DETAILS Travel Distances X-Axis: 1,016 mm Y-Axis: 508 mm Z-Axis: 635 mm Workpiece Table size: 1,219 mm x 457 mm Maximum workpiece weight: 1,500 kg Spindle Spindle taper: BT-40 Spindle speed: 7,500 rpm Spindle motor: 14.7 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,450 x 2,850 mm Weight: 5,600 kg EQUIPMENT Kfsdpfx Aoxgpp Ssanoa 20-position tool changer Programmable coolant nozzle Through-spindle coolant supply Low voltage lighting Chip conveyor

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, spindle speed (max.): 4,000 rpm, Haas TM-3HE CNC Milling Machine in great working order. The machine is currently in storage but can be powered up and demonstrated as required. The tooling shown in the pictures is included in the sale. Kfjdpfxexnmzus Aansa

Condition: used, Year of construction: 2022, X/Y/Z - 610/406/406 mm B-axis 120-35- deg. C-axis rotation 360 deg. (max. part swing 457 mm) Spindle speeds 15.000 rpm Spindle power 22,4 Kw Spindel taper BT 40 15.000 o/m, inline direct-drive 22,4kW Side mounted toolchanger 30 + 1, BT 40 21 bars internal coolant through spindle Chip conveyor Automatic tool & part measuring Automatic calibration Dynamic Work Offsets Ethernet Interface Haas Connect Media Display 1 GB memory 208 L. coolant system Fine filter for coolant Remote Jog hand wheel Syncronized threading Programmable coolant nozzle Kfedpfxov Ina Ns Aansa High Speed Machining Prepared for air up through table Wifi camera Full 5-axis Equipped with: Vacuum table Large tool package (see photos) ONLY BEEN WORKING FOR APPROX 1100 HOURS - APPEARS LIKE BRAND NEW

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, machine/vehicle number: SN3128158, turning diameter over cross slide: 533 mm, turning length: 572 mm, spindle bore: 63 mm, spindle speed (max.): 4,000 rpm, New condition + tooling + bar fender Kjdpfxsvwz T Us Aanefa

Condition: excellent (used), Year of construction: 2022, operating hours: 2,394 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Y axis travel +/-50 mm Z axis travel 355 mm Bar Capacity 44mm C axis 0,01 degrees Spindle Speed 6000 rpm Spindle Nose A2-5 Milling spindle speed 6000 rpm Rapid Feedrates X/Y/Z = 30,5 / 12,7 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Tool holder type VDI30 Weight 3600 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - C Axis programmable - Y Axis - Live tool turret (each places) - Integrated tool presetter - Chip conveyor - 3 jaws hydraulic chuck D160 mm - Tailstock Kfjdpfxowvf Thj Aansa - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: used, Year of construction: 2003, operating hours: 3,718 h, functionality: fully functional, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, rotational speed (min.): 8,000 rpm, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, documentation/manual, HIGH PRESSURE CTS20 BAR 4/5 AXIS TABLE Kfsdsxb D Aispfx Aanja

Condition: ready for operation (used), functionality: fully functional, turning diameter: 420 mm, turning diameter over bed slide: 432 mm, center width: 2,032 mm, TECHNICAL DETAILS Max. turning diameter (over bed): 432 mm Kedpfxjvwb Nco Aanofa Max. turning diameter (over support): 420 mm Center distance: 2,032 mm Control system: Haas

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Kjdpfx Aaov N Di Asnefa Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: good (used), Year of construction: 1999, Machine is in good condition. X 750 mm Y 400 mm Z 500 mm 10.000 rpm Ksdpfx Aajwx Rafsnsfa