Used Mist Extraction for sale (4,903)

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Bwsdpfx Abjib Dadjtot Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Year of construction: 2003, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -The fan comes: from a chip filter system -Motor: Siemens type 1L4 207-6AA60-Z 200L -Motor power: 22 kW Bsdpfed Tir Nox Abtewt -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm -wing height: mm -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg

Year of construction: 2007, condition: as good as new (ex-display), machine/vehicle number: 31495, SOXHLET EXTRACTION UNIT -SEMI-AUTOMATIC RAYPA SX-6 System for extracting fats or solvents soluble in a solvent using methods Soxhlet and Randall. Compatible with a wide range of samples. Extraction system with solvents, according to Randall method for fat and soluble materials determination, in food, feeds, soils, detergents, polymers, paper pulp, fibres, rubbers, textiles, petrochemical products, pharmaceutical products, etc. Furniture in stainless steel, epoxy resin painted. Heating by an electric plate with an armoured heater to assure homogeneous distribution of heat. Control of temperature by a microprocessor with P.I.D. action and probe Pt100 class A. Over-temperature safety control by independent thermocouple. Vitón® seal set. In accordance with standardized international methods: AOAC, ISO, AACC. Advantages Independent programming of “boiling” extraction time and “rinsing” extraction time. Specifications Working range of temperatures: room temperature +5 ºC to 220 ºC. Solvent volume: up to 50 ml. Sample max. volume: 25 ml. Solvent recovery: 60-70%. Reproducibility: ±1%. Extraction cartridge Ø ext 26 × 60 mm. “boiling” extraction time: 0-99 h. “rinsing” extraction time: 0-99 h. Extraction speed: 30-60 min. Electric protection IP65. NOTE: Components supplied with our equipment: 18 extraction vessels + magnetic adapter. 3 racks for extraction cartridges. 3 racks for extraction vessels. Bwedpjfiulfofx Abtjt Aligning rack. Box containing 25 thimbles. Documents: Instruction manual for use and maintenance in Romanian and English. Year of manufacture 2007, never used • For the Romanian companies there is the possibility of selling in instalments. Price Euro 2.350+ VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan Bodefdmg Sepfx Abtjwt -Motor power: 3 kW -Voltage: 380/660 V -Speed: 2870 rpm -Volume flow: m³/h -Connection input: Ø 310 mm -Connection output: 400 x 200 mm -Dimensions: 1000/680/H1030 mm -Weight: 254 kg

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Bwsdpfx Asunh Uvobtst Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Condition: used, functionality: fully functional, Instrumentation Laboratory ILab Aries Clinical Chemistry Analyzer. ILab Aries can perform photometry, turbidimetry and potentiometry test. Bjdpfx Ajupwawobtowt The throughput is up to 280 photometric +160 ISE tests/hour to give a total of 440 tests/hour. 280 photometric tests/hour, up to 440 tests/hour with the ISE module. Bench top system. Integrated sample bar code reader with host query. Sample Rack allowing the use of primary tube without the need for adapters, and cups. 68 sample positions with the possibility of continuous loading. Automatic pre-dilution of samples as required. Automatic re-run of test as required. Integrated Reagent bar code reader. Real-time update of reagent level, reagent stability, calibration stability. Low reagent level alarm. 56 refrigerated positions on board. Integrated ISE module for the determination of Na, K, and Cl on serum, plasma and urine. Up to 3 reagents per test. Multi point calibration curves with up to 8 calibrators. Automatic generation of calibration curves from a master calibrant. Compact size: W 1100 mm, D 650 mm, and H 500 mm Weight: 45 Kg Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 875 kg, volume flow: 2,750 m³/h, Donaldson dry extraction unit for sale Capacity: Bwjdjulgl Iepfx Abtjt Q 2.750 m³/h 5,5 KW further technical data see pictures Condition very good. Can be viewed at any time

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 Bsdpfxjt Tyqmo Abtowt V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Nedermann extraction unit Power: 230V Bodpeq H Auijfx Abtjwt Power: 900 W

Condition: good (used), Dust extraction,welding fume extraction,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,shotblasting and all kinds of dry dust. Brand: Vaupel - Gram Model : FL 104H High-pressure device. Filter cleaned by compressed air pulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters : Sound-insulated fan with silencer with 18.5 Kw output Capacity 8000 m3/h Filtration area 104 m2 Included : Filter unit Inverter Lime dispenser Bjdpfjn Nw Ntex Abtewt Noise suppressor

Condition: new, Year of construction: 2025, Suction nozzle diameter: 250mm Maximum volume flow: 5000 m³/h Nominal volume flow: 3534 m³/h Volume flow monitoring: Pressure difference display Filter area: 25.4 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 70 db Scavenging bag volume: 480 l Filter cleaning: mororic Motor power: 5.5 kW Extinguishing device: yes Machine length: 3510 mm Bwodpspfat Ejfx Abtet Machine width: 880 mm Machine height: 2545 mm Weight: 850 kg

Condition: new, Year of construction: 2025, Suction nozzle diameter: 350mm maximum volume flow: 8000 m³/h nominal volume flow: 6927 m³/h negative pressure: 2600 Pa at 21,4 m/s in dusty condition Volume flow monitoring: pressure difference display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 72 db Chaff bag volume: 640 l Filter cleaning: mororic Engine power: 11 kW Extinguishing device: yes Machine length: 4165 mm Bjdpfx Ajpfat Tebtswt Machine width: 1270 mm Machine height: 2595 mm Weight: 900 kg

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Bwodjnt Uc Rspfx Abtot Input: 125 mm (d) We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Condition: good (used), Extractor fan, welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor, -Manufacturer: Esta, small dust extractor extraction fan for smoke extraction -Type: Esta 100 Bwedpfxopxq Ugs Abtet -Drive: 0.55 kW / 2850 rpm -Fan wheel: Ø 280 mm -Connection: Ø 100 mm -Volume flow: Max. 1000 m³/h -Dimensions: 425/420/H845 mm -Weight: 35 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, radial fan, medium-pressure fan -Manufacturer: Karl Klein, medium-pressure fan type DMV 350 -Motor: away 1.1 kW/ 2765 rpm Voltage: 380 volts -Volume flow: 1260 m³/h -Pressure: 2380 Pa -Connection input: Ø 150 mm Bwodpfxjp A A Sae Abtjt -Connection output: 60 x 100 mm -Quantity: 1x piece available -Transport dimensions: 500/485H340 mm -Weight: 30 kg/piece

Year of construction: 2020, condition: like new (used), !!! We have three units is stock. Price is for one unit only !!! Taiwan Advanced Nanotech TANBead Nucleic Acid Extractor Maelstrom 9600 Excellent working used condition. Includes all pictured components only. Maelstrom 9600 is an automated nucleic acid platform designed for high-throughput applications. Specialized spin tips enable efficient mixing of magnetic beads with a larger processing volume. With an intuitive user interface and flexible programming, Maelstrom 9600 can boost laboratory productivity by transforming routine operations into a walk-away solution. - High-throughput: 96 samples/run - Efficient whirl stir mixing approach Bjdpfx Abekzlqfotjwt - Speed and precision: 4 independent temperature control modules - Flexibility in samples/run: 6, 12, 18, 24, 32 up to 48 (with single tube) Model: Maelstrom 9600 Volume: 87 x 70 x 57.5 cm Power supply: 220-240 Vac Processing volume: 50ul - 1600ul Spin speed: up to 3000 rpm Magnetic rod: 3000 gauss Display: Touchscreen Good working condition. Please check out our other listings as well.

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 Bsdpfju R Szyjx Abtewt - new exhibition machine -

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system Bwodpfx Abou R S A Rjtst - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: used, Mobile Dust Extraction Fritz Moeller Bodpfx Absddxl Estswt

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P • Intake nozzle diameter: 200 mm • Motor rated power: 2.9 kW; 400 V/50 Hz • Max. volume flow: 3010 m³/h • Rated volume flow: 2262 m³/h • Vacuum: 2174 Pa • Filter area: 13.7 m² Bjdpfsbpg Ncox Abtswt • Filter cleaning: Compressed air cleaning • 2 collection containers (rolling containers): a. 241 liters • Dimensions (L x W x H): 2322 x 830 x 2050 • Weight: 320 kg • Design / operating side can be selected: right / left Location: In stock at Bitburg Top price for the showroom model

Condition: good (used), Year of construction: 2002, 040 USED Semi-Stal tunnel basket washer. EXTERNAL DIMENSIONS (in cm.): - H: 230, - W: 250, - L: 1150. Bwodpfx Absvy Uxistet WASHING BASKET DIMENSIONS (in cm.): - W: 40, - H: 20-25. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), Year of construction: 2005, machine/vehicle number: HSL 1500-8-12/8 GB, type of input current: AC, volume flow: 2,500 m³/h, filter area: 33 m², Dust filter herding with modular fan Technical data: Power consumption 1x15 kW option 2nd 15kw Bwjdpfxsvz Az Ie Abtet Filter is supplied with 1 side channel fan 2nd side channel fan is optional. Filter surface 33 m² Dust container capacity 40 litres Weight 660 kg Suction connection 2x 160mm Operating volume flow: 2500 m³/h Operating mode: Continuous operation Cleaning: compressed air Compressed air connection must be available side channel fan: brand: Effepizeta Type: SCL K10-TS Power: 15kw Speed: 2908 rpm

Condition: not inspected (used), Year of construction: 1995, Connected load 380V 2.2kW Bwsdjvz Uhyjpfx Abtjt Intake nozzle 200 mm mobile 2x chip bins á 190l Volume flow 2500 m³/h HxWxD: 2160 x 830 x 1900 mm

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Bjdpfsyffx Iex Abtewt Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight:

Condition: good (used), Year of construction: 2019, Esta Dustomat 62 Dust Extractor The best-selling, certified dust extractors The professional-grade Dustomat 21-67 series meets the highest standards. These units can be used both as mobile units at individual workstations and centrally for simultaneous extraction at multiple locations. Depending on the unit size and the nozzle diameter of the processing machines, extraction can be performed simultaneously at up to six locations. The permanent filter cartridges are cleaned manually, with a motor, or with compressed air, depending on the unit model. • Compact and powerful • Low operating costs • Easy dust disposal • Can be used as a mobile single-station or central extraction system • Suitable for almost all types of dust • Optional certification for special applications Areas of application: - Single and multi-station extraction in industry and trade - Free-flowing dusts - Dry shavings Special features: - Four filter cleaning methods: manual, motorized, pneumatic, and jet cleaning - Cleanable permanent filter cartridges (dust class M) - Post-filter cassettes (dust class H) available as an option Manufacturer: Esta Type: Dustomat 62 Connection voltage: 400 V Connection diameter: 160 mm Bsdpfx Aboyftxvotswt Drive power: 3 kW Filter area: 9.6 m² Dust collection container: 200 liters Mobile collection container Max. negative pressure: 4,600 Pa Max. air volume flow: 1,850 m³/h Dimensions: 1,830 x 782 x 2,040 mm Year of manufacture: 2019 Weight: 265 kg Find more items – new and used – in our shop! International shipping costs on request!