Used Molder Egg Cartons for sale (718)

Condition: excellent (used), Year of construction: 2010, Very neat Moba M100 with Yaskawa MR40 tray palletiser. - M100 L. - Hr 7000 - Year of construction 2012 - TS10 tray stacker - S-band - MR40 Tray palletiser - 3 walls of fencing - In very good condition - M100 also for sale without MR40 - MR40 also for sale without M100 - M100 and MR40 have both run no more than 7000 hours. Itjdpfx Ajwd Uqxobced - The Yaskawa robot is in very neat condition. - The configuration can of course be adjusted to your wishes. - Immediately available MR40 also suitable for an omnia or farmpacker of another brand Interested, call or email us. Bos Technical Support import-export packaging machines. Sorteermachine eiersorteermachine gradingmachine sortiermachine sortieranlage eierverpackungsmachine Moba, Staalkat, Prinzen, Rational, Kletec, Yaskawa

Condition: excellent (used), Year of construction: 2010, Year: 2010 Capacity max. 36000 Stainles steel Traystacker: TS10 Output conveyor 2800mm Compleet recondition  Itjdpfx Abegzll Deced For more information please call us. Bos Technical Support import-export packaging machines. Sorteermachine eiersorteermachine gradingmachine sortiermachine sortieranlage eierverpackungsmachine Moba, Staalkat, Prinzen, Rational, Kletec

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Manufacturer: Jagenberg Machine type: Folder-gluer with automatic packing machine Model: Diana 104-1 + Japack 40-2 Year of manufacture: FKM 1997, overhauled 2020 Iedsrnkwrspfx Abcstd Year of manufacture: Automatic packing machine 1985, overhauled 2020 Location: 41751 Viersen, North Rhine-Westphalia Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: - Pre-breaking station with device for pre-breaking the 3rd creasing line - Module 150 with servo-driven overrun folding - Bottom gluing unit with 5 mm glue disk, including pump (for 30 l hobbock) - Folding station - Threading station / central transport - Transfer station - Pneumatic collecting/pressing device - Digital position sensors - Electronic control system, including counter and start/stop removal control Mode - Top gluing unit (model year 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, job memory, including stainless steel piston pump This machine is equipped for processing side-glued folding boxes, lock-bottom boxes, single-fold folding boxes, and 4-point erectable boxes. A compressor is not included. Other: The machine is in very good condition, ready for operation, and can be inspected during production upon request. Availability: Immediately We look forward to your inquiry. Your WS Quack + Fischer Team

Condition: used, Year of construction: 2017, Belt: PVC or PP; Max. width: 50 mm; Core: 76 mm; Overlap: 40–55 mm. Transport speed: 20 m/min. Operating temperature: +5 to +45 °C. Connection: 230 V/1~N/50 Hz, 0.6 kW. Protection class: IP54. Power: 240 W. Itodpfjwv D E Asx Abcsd

Condition: used, EX Box Taper / Case Sealer / carton Sealer Side drives Top and bottom tape heads 50mm wide tape Fully guarded 230 volt power supply Itedjx Dnlgspfx Abcod

Condition: good (used), UDA 150 S - carton feeder or sleeve feeder suitable for mounting a printer or label applicator - widely used in the pharma industry - appears to be in good condition - some spares with the machine and basic wiring details. Itjdpjxyyz Esfx Abcod READY TO SHIP WORLDWIDE Export documentation and shipping available

Condition: good (used), 1 x Ovoconcept Egg Cracker/Breaker Type: OVO 20 Ijdpfx Aen Utzijbcetd Serial Number: 248 Year: 2009

Condition: excellent (used), Year of construction: 2012, Soco Case / Carton / Box Taper Fully Stainless Steel Itsdpsw Rr Dhefx Abcsd Top and Bottom Tape Heads (removable) Mobile on lockable castors Manual side drive adjustment Manual top head adjustment Tape sizes 28mm to 48mm In excellent condition

Condition: excellent (used), Year of construction: 2023, EXp Carton Sealer / Box Taper Ijdpfxow H D A Ao Abcjtd Top and bottom tape heads Suitable for 28mm or 48mm wide tape Gravity infeed roller conveyor Outfeed gravity roller conveyor Outfeed gravity flexi expandable roller conveyor 230 volts power

Condition: excellent (used), Year of construction: 2018, Soco T55 Random Carton Case / Carton Sealer / Box Taper With top and bottom tape heads With outfeed gravity roller conveyor 400 V, 3 Ph, 10 A Plastic rollers, roller width: 600 mm Height adjustable legs Dimensions: 980 mm x 800 mm Iodohlp E Hepfx Abcotd Conveyor dimensions 500mm long

Condition: excellent (used), Soco System Carton / Case Sealer With top and bottom tape heads Itodshlp E Aepfx Abced Model: T-100 380 V, 3 Ph Plastic roller belt, roller width: (2x) 300 mm Total dimensions: 1540 mm x 800 mm

Year of construction: 2021, condition: new, Soco Case Sealer, Model T10 Iodsgq Nx Uspfx Abcetd Standard Product Specifications • Capacity 30 units/min • Galvanised steel body construction • 50mm high grip side drive belts • Tape width range 32mm 55mm • Top & Bottom tape heads • Manual side drive adjustments • Manual height adjustments • Three phase power supply • Machine dimensions 1170mm L x 740mm W • 50mm tape overlap on box We supply a full range of Soco Equipment and spare parts

Condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan -Manufacturer: Ziehl-Abegg, radial fan motor without fan wheel -Type: MK205-UDK.30.N -Speed: 950 / 480 rpm -Power: 5.0 / 0.66 kW Itodpfxsucmm Sj Abcsd -Protection class: IP 54 Quantity: 1 piece -Dimensions: Ø 368 x 330 mm -Weight: 64 kg

Condition: ready for operation (used), Year of construction: 2002, This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine. • CNC designed for wood beam processing • Maximum incoming beam length: 13,500 mm Iodpfx Absyaq Dxscstd • Maximum outgoing beam length: 12,000 mm • Maximum working section: 440 mm × 240 mm • 2 independent clamps for transport and positioning (“two-hand” system) • Circular saw unit, Ø 750 mm, 4 axes • Universal milling unit with double output, 4 axes • Lower vertical drilling unit with multi-purpose support • Horizontal drilling unit with multi-purpose support, tilting • Long horizontal chain saw unit, 700 mm, with counter-support system • Includes tool change equipment • Independent control panel • CE compliant Additional equipment • Loading area with 7 motorized transverse chains • Unloading area with 6 arms for parking and storage of parts

Condition: ready for operation (used), Year of construction: 1998, CNC Wood Machining Centre manufactured in 1998. This HUNDEGGER K1 features a maximum workpiece length of 13,000 mm, a workpiece width of 450 mm, and a thickness of 300 mm. It includes various milling and drilling units, along with a ReaJet printer for material marking. If you are looking to get high-quality wood machining capabilities, consider the HUNDEGGER K1 machine we have for sale. Contact us for further details. Iedpfxjymz Uhe Abcstd • Max. workpiece width: 450 mm • Max. workpiece thickness (height): 300 mm • Max. workpiece length: 13,000 mm (13 m) Additional equipment • Cylindrical milling cutter 350 mm x 80 mm (new type) • End mill 160 mm x 40 mm – 2 pieces • Circular saw blade – 2 pieces • Dovetail cutter mounted on the cylindrical milling cutter • End mill 100 mm x 30 mm mounted on the horizontal unit • Chain slotting unit • Drilling units: 2 vertical, 1 horizontal • ReaJet printer for printing markings on the material • Cylindrical cutter Ø 265 mm for corner joints, mounted on the main unit • Vertical ink marker at the machine exit

Condition: used, Year of construction: 1994, machine/vehicle number: 1301, functionality: fully functional, I am offering for sale a Hundegger P-10 woodworking machine, designed for processing roof beams. The machine is fully operational and still in use; demonstration under power is possible. Maximum cross-sections: 260 x 400 mm. Year of manufacture: 1994. Iedpfx Abew I Emkocetd Included with the machine: - Under-table cross-cut saw - 2 marking pencils - 3 large milling cutters - 1 finger joint cutter - 2 drill bits + nail drill - 4 chain mortisers Service carried out on 10/6/2025. A large number of spare parts are included. Please do not hesitate to contact me for more information.

Condition: used, Year of construction: 2005, functionality: fully functional, I am offering a rare Hundegger K3 for sale. The machine is operational and can be inspected by appointment. The K3 was manufactured in 2005 and comes with the following equipment: - Infeed and transfer cross conveyor - Offcut holder in front of the saw - Underslung swivel crosscut saw - 5-axis universal milling unit (UF5) - Combination support for vertically operating tools 2 reinforced vertical drilling units - Combination support for horizontally operating tools Slotting unit 1 standard drilling unit 1 drilling unit swiveling at 45 degrees - Fully automatic hydraulic beam turning station - Marking unit on stop side - Marking unit on operator side - Underside marking device - Additional monitor in the outfeed area - Deposit table for short components - Top feed roller Ijdpfsyvplnsx Abcstd The machine must be dismantled by the buyer. Pickup only from company premises.

Condition: ready for operation (used), Year of construction: 2003, Two identical Hoegger meat presses are available. Cycle rate: approx. 5cycles/min, max. product dimensions X/Y/Z: 720mm/280mm/120mm, press chamber dimensions X/Y/Z: 720mm/270mm/120mm, max. operating pressure: 8bar, machine dimensions X/Y/Z: approx. 2550mm/900mm/1850mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Itjdpfxeyuglzo Abcod

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, SPM2 - 2600 - 2600 Can be inspected during operation. Training possible on request Iedju H Uqcopfx Abcstd - Automatic panel infeed - Lifting table 2600 x 6000 Aggregates - SPM-FF6-23U Finger router 6 Kw max. 23170 rpm - SPM-KSK3 4-axis circular saw unit 3 kW saw blade 220mm - SPM-5F 5-axis milling unit 6.0 kW (special motor 24,000 rpm - 5-axis unit) - SPM-IJ Ink marking system - InkJet HP system Component delivery - SPM-SHP-6000 Special lifting table Panel removal 2600 x 6000 - Access guarding of discharge area

Condition: excellent (used), Year of construction: 1989, HYDRAULIC VENEER CUTTER Brand : TORWEGGE Model : 3200 Hydro Year : 80'S Machine brought up to standard (DEKRA inspection 03/2023), functional, offered as is, without overhaul. Isdporx S Ucofx Abcjtd A video of our tests July 2024 MACHINING CAPACITIES : - Cutting length: 3200 mm - Max. cutting width: 60 cm - Passage height 100 mm - 50-70 kP/cm² pressure COMPOSITION : - Robust welded steel-mechanical frame - Ground cast-iron support table Front clearance 40cm Floor height (working height): 0.9-1m depending on installation Front lighting - Control panel mounted on articulated bracket - Rear table with 2 auxiliary extensions (PxL) 1x1.35m Electrically controlled pusher guide Working length 2.12m Distance between supports 30cm Manual precision adjustment Dimension indicator on ruler 2 flow recovery ejectors ELECTRICAL CHARACTERISTICS : - Power supply : 400v.Triphasé+N 50Hz - Installed power: 15 kW approx. (2 motors, hydraulic pump and pusher) Machine supplied with electrical diagrams 2 boxes with knives OPERATOR SAFETY : - Lockable disconnect switch - Mushroom-type stops - Two-hand safety control device - Frontal light curtain - Key lock for blade change - Safety contacts on removable housings - Ejectors at end of cycle to advance workpiece onto table Dimensions for transport (WxDxH): - Main frame: 4800 x 1300 x h.1750 mm. Estimated weight: 3000 Kg - Rear guide, on pallet: 2.20 x 1.20 x h1.00mm Estimated weight: 300 kgs Functional machine offered without overhaul.

Year of construction: 2021, operating hours: 22 h, condition: used, functionality: fully functional, machine/vehicle number: 2100034498, Industrial microwave device see the manual for detalis (uploaded document) Itjdpfx Aeymzkiobcjd

Condition: excellent (used), Year of construction: 2025, operating hours: 500 h, Eggersmann “Teuton Z 50” Mobile Single-Shaft Shredder Year of manufacture: 2025 Operating hours: 500–1000 Extended warranty available Engine: Diesel, 6-cylinder Output HP/kW: 500/373 Shredding shaft length x diameter Ø: 3,000 mm x 1,050 mm Rotor speed (rpm): 20–40 Bolted tools Tool-free cutting gap adjustment in six steps Extra-large feed area, 5 m wide Rear discharge conveyor Reversing rotor Operating position: Length (mm): 15,864 Width (mm): 2,540 Loading edge (mm): 3,000 Discharge height (mm): 5,000 Transport dimensions Length (mm): 8,976 Width (mm): 2,540 Height (mm): 3,652 Weight (kg): 25,000 VARIOUS OPTIONS AVAILABLE ON REQUEST Screen basket systems: Strip and honeycomb screen baskets in various versions Rotor tools: Multigrip – Unigrip – Twincut – Rootgrip Overbelt magnet: Extra-strong neodymium version, Itodpfx Ajxqxbxebcsd hydraulically height-adjustable, material discharge on both sides possible Ecospray moisture system and much more…

Condition: like new (used), Year of construction: 2015, I sell the automatic CNC working centre for wooden constructions Hundegger K2i. Almost new machine. Year 2011. Under-table rotary saw with saw blade from 750 mm to 800 mm, 360 degree rotation, servohydraulic tilting 0 – 65 degrees universal 5-axis unit equipped with cylindrical milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min 460 mm, machining depth min 300 mm combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min. 460 mm, machining depth min. 300 mm positioning and gripping of the material using arms, which, while the material is measured, transported to the desired location, the arms keep the processed element as close as possible to the tool that processes it for stability. the processed material can be rotated automatically tolerance +/- 2 mm at a length of 13 m Fully automatic wood input with input roller track and input and sliding cross conveyor K2i: Under-table tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Kombisupport for vertically working tools K2i: Drilling device (2.2 kW) – vertical drilling direction K2i: Kombisupport for horizontally working tools K2i: Drilling device (2.2 kW) – horizontal drilling direction Itedpjxtxkxefx Abcod K2i: Marking tool (rear or on the user side) K2i: Fully automatic element rotation – hydraulic K2i: Transport and positioning system “two-hand system” K2i: Electronic connection K2i: Roller track for removal wooden elements with a pusher K2i: 5-arm storage table K2i: Safety device K2i: Higher quality upper surface of the machine K2i: Extension of the K2i frame to 13.56 m K2i: 5-axis universal milling unit - UF5 (increase to 4-axis) K2i: Remote maintenance (including portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Suitable for wooden house constructions! Available immediately.

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, I am selling a Hundegger K2i carpentry centre from 2008. The machine is in very good condition and well equipped, including: - 13 m infeed table - Beam clamps with chain drive Itodpexx T Rdofx Abced - 5-axis sawing unit with new 800 mm saw blade - 5-axis milling unit with finger cutter, new 60 mm cutter, and new dovetail cutter - Horizontal and vertical drilling - Additional end milling unit for rafter tails from underneath - Slotting attachment with a complete set of 8 and 10 mm chains Note: The slotting attachment is rare equipment, used for the production of trusses with concealed plates. The machine is in excellent technical condition, regularly serviced, and has been in continuous operation. We are selling due to purchase of a much newer unit. Availability: immediate. We offer disassembly and installation for €10,000.

Condition: used, Year of construction: 1997, cutting height (max.): 300 mm, cutting width (max.): 450 mm, saw blade diameter: 800 mm, working width: 450 mm, We are offering this used Hundegger K1-A joinery line, model Hundegger K1, year of manufacture 1997. Type: K1-A Machine number: 1647 Year: 1997 Equipment includes: - Infeed cross conveyor with flat chain belts - Under-table tilting cross-cut saw, blade diameter 800mm - 4-axis universal milling unit with finger cutter and dovetail cutter Combined support for vertically-operating tools: - Drilling unit - Vertical finger milling unit Combined support for horizontally-operating tools: - Drilling unit - Drilling unit - Slotting unit - Rear marker - Automatic turnover device - Various milling heads Component dimensions from 20x60mm up to 300x450mm. Feel free to contact us with any questions! Itjdpfsynwx Eex Abced